BIOPLASTIC FROM POTATO STARCH 

Starch, a large-molecule carbohydrate used in making beer. To make any alcoholic beverage, there must be sugar present for yeast to ferment.

that's nice

hello, yes it is, but we did not test, to have the exact rate of how much water it absorbed , we tried to see if it was soluble in water but it did not dissolve so easily with hot water and mixing, we did not make a anti-aderent coat but thats possible

you can do both, but if you put on the oven you need to control the temperature and the time

Hello, i used the glycerin from the lab the one you buy as a quemical product, but you can substitute for the glycerin we buy at the pharmacy so i guess the one you use for the soap.

@@izaza4816 thanks for the reply!by the way this is my research study😘

@@amberjadepacia781 good luck

Hi, if it is the same molecular formula then I don't see any problem. The only difference maybe the resource that is beeing used.

Hello, i think is nice to understand the basics firts, like what are plastics why are they called like that, what are polymers, how are they made, its primarily charactheriscs thermoplastics, thermosets etc, its structures, processes of polymerization, and then processes into making other materials

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rHxxLYzJ8Sw.html: crash course on polymers. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UloIw7dhnlQ.html: organic quemistry

Iza Rossi You’re so nice! Thank you very much! I subscribed❤️ I wish you all the best.

you might try to make a composit material with an iron and some baking paper. watch out though glasdpoint of pla may be beyond the ignition point of potatoestarch.

Hola! Las cantidades de reactivos utilizados fueron: -20 gramos de fécula de patata, en casa. -20 mililitros de vinagre -50 mililitros de agua - 5 gramos de glicerina Mezclar todo y ponerlo a calentar, el calentamiento sirve como disparador de la polimerización y cataliza el proceso. La temperatura para la polimerización fue de 70 grados durante 30 a 25 minutos, mezclando casi todo el proceso, luego se puede verter en placas de Petri.

en verdad essas son las cantidades, mas exatas: 20 gramos de almidón en polvo seco en invernadero. con 175 ml de agua, 75 ml de vinagre y 10 ml de glicerina, colocados en un vaso de precipitados y calentar durante 45 minutos hasta obtener una mezcla homogénea y viscosa, esparcir en platos de petri para secar durante 2 semanas.

vaso precipitados és el bequer

@@izaza4816 hello!! can you please translate the materials to english?

hello, yes you can since they are the same thing, only differs in the name or the level of purity.

@@izaza4816 ohh ok.. Thank you for your reply😊 I'm going to do that tomorrow

@@Sneha_294 you are welcome. That's nice, if you can, let me know the results :).

Hi, i don't think this plastic can be used in your 3d printer or any other polymeric processing like injection or extruder, is different than comercial "biodegradable" plastics. But you can read this article about bioplastics used on 3d printers, but most of them are degradeble and not biodegradable: www.sculpteo.com/en/3d-learning-hub/3d-printing-materials-guide/3d-printing-bioplastics/ Hope it helps :)

@@izaza4816 thanks, that save me the time and energy to experiment on these

you're welcome

Hello, we never made any tests to really see its elasticity but once you apply a tension it straches and tears. We are still testing it's properties. But this was just a demonstration for a english work. But once it dries i would't concider that elastic but has plastic porperties, is not vitrious.

if you would like i can send you the article we made

Super thank you,🥰

@@izaza4816 can u please send the article

@@yashodhaa7490 Hello, it's published in portuguese on a congress anal on this link you can read it's page 8: www.ifsc.edu.br/documents/35993/1838881/ANAIS+CONGRESSO+DO+CONTESTADO_compressed+%281%29.pdf/bf48d8f4-24be-4613-851b-bf5a3c8fe02f