3M DI-NOC CA-421 BLACK CARBON FIBER 4ft x 1ft Vinyl Wrap
US: amzn.to/2HMXRDj
CDN: amzn.to/2VIY7L1
3M DI-NOC CA-421 BLACK CARBON FIBER 2ft x 6ft Vinyl Wrap
US: amzn.to/2HVecpw
CDN: amzn.to/2xAk3QD (4' X 4')
Other types of vinyl color:
3M 1080 BR212 BRUSHED BLACK METALLIC 60"x12" Vinyl Wrap
US: amzn.to/2HnCg7y
CDN: amzn.to/2mnNsaT
3M 1080 Black Matte 1ft x 5ft Vinyl
US: amzn.to/2HoFpzU
CDN: amzn.to/2o2ZjLT
3M 1080 G13 GLOSS HOT ROD RED 5ft x 1ft Vinyl
US: amzn.to/2Kbnoqt
CDN: amzn.to/351ojF7
=========
3M Adhesion Promoter Primer
US: amzn.to/2JghaoK
CDN: amzn.to/2nfiC4C
Tacklife 1600W Variable Temperature Heat Gun HGP73AC
US: amzn.to/2Bycp8C
CDN: amzn.to/2mkEzii
OLFA 5019 SVR-2 9mm Stainless Steel Knife
US: amzn.to/2GuHutS
CDN: amzn.to/2o2mFBi
Black Card Squeegee With Green Micro-Fiber
US: amzn.to/2EaLzRD
CDN: amzn.to/2moYI73
IR Thermometer IR-60
US: amzn.to/2uXCd8Y
CDN: amzn.to/2o2nSbO
============
** TIPS FOR WRAPPING THE PRNDL PANEL NEXT TO THE GEAR SHIFTER:
For the gear shift indicator light holes next to the shifter, there is a piece of clear acrylic piece under the panel. The clear piece under the holes is hot melted onto the larger piece.
What you need to do is slowly drill the top part of the two posts . Use a drill bit a bit larger than that hole. Drill just enough of the top of the posts until the piece will come out (don't drill through the entire piece). There are no glue or adhesive between the two pieces.
Once that is out, to wrap into the hole, use a heat gun to heat the material & stretch it. Push the material into the hole with something like the cap of a pen that will fit into the hole. Do that several times until it stretches and conforms a bit. Now you need to make multiple small relief cuts in the middle of the hole. Heat it one more time, and use your pinky finger to get it to stick into the hole, and wrap the small little corners of the relief cut underneath. Do that for each hole. If you concerned it might lift later, you can put a bit of crazy glue underneath on the edges.
For the clear plate, place the piece back on, and use some clear 2 part epoxy and fill the top part of the hole underneath. Most epoxy will dry to handle in 20-30min.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
21 апр 2018
