Blades - Things I Wish I Knew Before??? | Must Know Info About Blades & Blade Sharpening

Подписаться 266 тыс.

Просмотров 195 тыс.

50% 1

Everything practical that you need to know about how to choose the best saw blade for you and how to get the most out of your saw blades. I also share the state of the art sharpening service that I have used for years to get my saw blades sharpened.
W.D. Quinn Blade Sharpening Service - quinnsaw.com/carbide-tipped-s...
My favorite Blades:
Favorite Miter Saw Blade - geni.us/YkCGKv on Amazon (commissions earned) (Sub-Micron Grade Extended Life Carbide and 6 degree hook) I USE THE SM6300 personally NOTE THE LM6300 is not as high quality carbide and his a more negative hook angle.
Favorite Table Saw Blade - geni.us/X3f128 on Amazon (commissions earned)
Blade Cleaning Solution - geni.us/RUUHWe on Amazon (commissions earned)
Blade Cleaning Brushes - geni.us/1rV93M on Amazon (commissions earned)
Blade Cleaning Plastic Container - geni.us/Wjumz68 on Amazon (commissions earned)
Rockler Blade Cleaning Container - www.rockler.com/router-bit-an...
(0:00) Common Mistakes with Blades
(1:04) WHERE TO GET BLADES SHARPENED
(1:41) WHAT ARE THROW AWAY BLADES
(2:38) HOW MUCH SHOULD YOU SPEND ON A BLADE
(4:29) USE INDUSTRIAL BLADES FOR HIGH VOLUME CUTTING
(5:04) MY GO TO MITER SAW BLADE
(6:00) WHY USE INDUSTRIAL BLADES
(6:50) LOW VS MID VS HIGH QUALITY BLADES
(7:52) CUT QUANTITY & BLADE LIFE
(8:28) BLADES THAT MAKE SENSE TO ME
(9:07) QUINN SAW CO ENGRAVES YOUR BLADES
(9:34) HOW MANY BLADES SHOULD YOU OWN
(11:06) STANDARDIZE YOUR BLADES FOR SIMPLICITY
(11:28) MY GO TO TABLE SAW BLADE
(12:16) MY BIGGEST BLADE MISTAKES
(12:57) YOU MUST CLEAN YOUR BLADES FOR MAXIMUM LIFE
(14:10) HOW TO CLEAN YOUR BLADES
(15:45) HOW TO TELL WHEN A BLADE IS DULL
(16:39) ALWAYS SAVE YOUR BLADE BOXES
(18:31) HOW TO SEND IN YOUR BLADES FOR SHARPENING
(19:09) HOW TO CLEAN YOUR OWN BLADES
(20:54) FINAL THOUGHTS
My Favorite Tools - Insider Carpentry Amazon Site - www.amazon.com/shop/insider_c...
Support more content like this by becoming a PATREON SUPPORTER - / insider_carpentry
INSTAGRAM - insider_carpentry

Хобби

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 355

@Northwooods 3 года назад

As a fellow carpenter I am shocked by the lack of likes on this video. This is the kind of valuable information that most of us probably don’t think about, but yet has a huge impact on money and time saved. Much appreciated.

@ChromeLuxx 3 года назад

All sounds like work to anyone under 45 yrs old. Why work when they are all going to be a rich RU-vid stars, or invent some POS and live like a Kardashian.

@bret9741 Год назад

I don’t think most users know there are high end blades.

@CraigularjJoeWoodworks Год назад

⁠@@bret9741maybe. I think pros know pro tools and blades though. Home owners would probably think diablo is upper tier, so I agree on that front

@jt-eb4sp 2 года назад

This is one of the best videos I have seen. His presentation is flawless and his opinions are right on. Great job.

@aspees 3 года назад

When looking at the initial investment of buying a $50 blade vs a $100 blade you need to look at longevity of sharpness first. The Forrest/FS quality will outlast the Freud/Amana quality 2:1. It’s basically a wash in cost. However, when you get to sharpening you pay the same amount of money to sharpen cheap blades vs expensive ones. Every time you spend your $25 to sharpen the $100 blade you get a $100 blade. Sharpen it 5 times means you have spent $100+$125 = $225 to get $600 worth of blade which outlast the good quality 2:1. That’s without even talking about cut quality. Point being buy good blades they will last years of decent use. We always buy them in pairs. One is on the saw the other is either at the sharpeners or is sharp on the shelf.

@InsiderCarpentry 3 года назад

Well said!

@michael.schuler 3 года назад

Excellent blade tutorial. Thank you. Many years ago I adopted a European strategy that has enabled me to maximize flexible use of my tooling: I specified 30 mm bore when purchasing all my high quality blades. At the time, I ran a German combination machine with 30 mm arbor; others in my shop have 5/8", 3/4", and 1" arbors. By use of the appropriate saw bushing (I buy from Amana), I am able to deploy any blade on almost any machine, at times maximizing the usefulness of certain specialty blades (e.g. triple chip.) I also had custom 30 mm O.D. collars machined, one with 5/8" I.D. and another with 1" I.D., that allow me to deploy my 8" stack dado on either table saw, RAS, or shaper. I run mostly Leitz and Forrest blades, purchased in pairs. Care and maintenance such as you present in this video have allowed most to remain in service for decades. Besides regular cleaning, another key to optimizing cut quality (and minimizing power requirement!) is the use of blade stabilizers, especially on lightweight table saws. With stabilizer diameter equal to as much as 50% of blade diameter, the improvement in the performance of a thin kerf blade is dramatic.

@tedd1091 Год назад

Dude, that was off the charts for RU-vid - Well done

@katabrontes 3 года назад

Very helpful Spencer. I didn't appreciate how important it was to keep blades clean. Thanks for the many tips and good advice I get from your channel. Mike (UK)

@Stefan_Kawalec 3 года назад

We've all been there - trying to outsmart ourselves and buying dirty cheap blades. Then you find a really good sharpening parlour and all of sudden end up with bunch of 200 Euro a piece blades. And it makes sense. Great video, as always. You've become a really good teacher.

@pattihudson6962 3 года назад

I have been sharpening my Dewalt blades with my Foley Sharpener for years. Always have excellent results.

@BradKaboord 3 года назад

Most of the best answers are loaded with question. Thanks for your take on this topic.

@iamjackalope 3 года назад

Keeping your blades clean is a must. I just cleaned about half a dozen blades that had been relegated to the dull blade pile by others that have access to my table saw that came back to life after a good cleaning. I have been using the Freud blades for a bunch of years professionally and I have had 0 problems with them. I have them sharpened all of the time and they come back good as new. But then again I try and stay away from thin kerf blades especially on my hand held circular saws and even more so on my beam saw with it's 16 5/16" blade. As a matter of fact I have a whole stack that are ready to go to the sharpener right now. That's partly why I clicked on this video. Some of them where being tossed out on job sites and I grabbed them from the trash bin. They have never been sharpened before and I'll send them in and have a nice sharp blade for a third of the price when I get them back.

@justinrehms4530 Год назад

I’ve never thrown a blade away. I’ve always taken my low quality blades whether chipped or dull to get retoothed with high quality carbide to be sharpened. I’ve even had my blades teeth redesigned for optimal use on my table saw or miter saw so they cut smoother and faster. I’ve been using the same saw blades now for 20+ years. Cleaning for sure helps them last longer than you’d ever think too.

@screaminpotato 3 года назад

Really helpful information! It shows how intentional and serious you take your business. It’s hard for some to sit back and perform maintenance but this shows it is necessary.

@YvonBolduc_Tip007 3 года назад

Always great content. You are a reference in the field of finished carpentry.

@edmundnyamupepema 2 года назад

Thank you so much for such a saw blade masterclass. I wish I could thumps up it 1000 times.

@ravenheart1439 4 месяца назад

Man you just answered a bunch of questions I had, it's about like finish, it's a deep worm hole we get into...thanks for your time man .

@jamesurquhart1289 3 года назад

Spencer, Really enjoy your channel, your videos are well thought out and really show your knowledge base. As an Engineer by trade I enjoy the way you make a process out of the job, the stop block video series really demonstrates how you recognize efficiency for your company while increase your speed an accuracy on the job. Look forward to more informational videos.

@T.E.P. 2 года назад

You share sooo much through your experience and always improving and thinking about improvements ... and your channel has been a huge joy here on RU-vid. Cheers Spencer. Your excellence is inspiring

@InsiderCarpentry 2 года назад

My pleasure 😊

@florissantrob 3 года назад

great info. never knew you should clen your blades. Love your videos. HVAC worker now but 13 yrs as a carpenter. Still do it just not on the daily. You always put out amazingly informative videos, thank you.

@pavelnesterov5554 Год назад

At first I was gonna say, you are NUTS paying $180 . For a blade. But after listening for the reason and use of it. I will be buying these blades too . Thanks much

@davidsherley2652 3 года назад

Hi Spencer - as I’ve watched more of you videos, I want to comment again. I really like your take on means & methods - how you approach your work. Your balance of precision, efficiency and production repeatability is truly admirable. I recently came across your channel and have gladly subscribed. In my younger days, after college, I apprenticed with frame and later trim carpenters for roughly five years. I later went to work in commercial cabinet shops, first in production and later as a project manager. From there I went back to architecture (what I studied in college). My orientation toward working with the tools is similar to yours, but my experience is less evolved. As my architecture career developed, I moved around the country following commercial projects...and the tools went into storage. I’ve recently decided to settle in Eastern Indiana and gotten the tools out of storage. As I reconnect with my love for woodworking, I hope to synthesize my experience and develop a work style similar to yours. Keep up the workmanship and the videos!

@gavinfeargrieve4874 2 года назад

You pretty much summed up everything I've been thinking about blade selection/ cleaning and sharpening. It's just nice to hear another professional come to the same conclusions! And, yes- the sharpening service is really only worth it when it's done by robots.

@mikea7126 2 года назад

I bought 3 FS Tool saw blades from a place called industrial saw blades which was next door to where I was working. This was in 1990. I still have them today and use them regularly. The are excellent blades and I would recommend them to anyone looking for good quality Blades.

@kiwdwks 3 года назад

Awesome info/recommendations! Thanks!

@lumberjack7923 Год назад

LOVE HOW DETAILED YOU ARE WITH YOUR DESCRIPTION AND LEAVE NOTHING TO QUESTION ! just stumbled across your channel. Recently retired from 35 yrs of emergency services work but started out carpentry work as a teenager and young man and I am looking to dabble again in my own house but am so pleased to find EXPERTS on you tube that are willing to share . After all these years it is evident that I have a lot of brushing and catching up to do BUT eager to start the journey with renewed enthusiasm and vigor & NOW MORE IMPORTANTLY ARMED WITH VALUABLE KNOWLEDGE to proceed with !!! thank you I WATCHED YOUR SHIP LAP VIDEO and picked up some valuable tips !!!! because that is what I am using in my first project covering a beautiful natural stone fireplace and converting it to something more modern looking ( MAKES ME WANT TO VOMIT 🤮🤮🤢 ) having to paint the bottom stone white and cover the top with ship lap BUT as the saying goes HAPPY WIFE !!!!! LOL

@geraldlessard7446 3 года назад

Great informational video. Keep them coming.

@dano6201 3 года назад

Great video! I’m a self employed carpenter and it’s funny when I worked for people before I never knew to clean blades. When I went on my own I realized my blades weren’t cutting well even though they where new and thought to clean it and it cut like new so I do like you said clean it quite often! In a pinch I use windex and a toothbrush on site.

@anthonygerali7220 3 года назад

Just ordered both the 10"& 12" blades from your links...Happy to support this channel!...Keep the awesome content coming!

@InsiderCarpentry 3 года назад

Much appreciated

@WarrenDrakeVRN 3 года назад

Excellent video! Best I"ve ever seen about saw blades on RU-vid!

@mrkrause3 3 года назад

Great information! Thanks Spencer!

@toodlican 3 года назад

Wow. That was interesting. The guy I worked for never have nice blades and we all just got used to cutting with them. The cleaning tip blew my mind as most of the time on my personal saws I changed blades because they had build up. Thanks for the tips

@BigRed- 3 года назад

Love your content man. You really know what you’re talking about. I’ve learned so much from you, thank you!

@InsiderCarpentry 3 года назад

My pleasure!

@tommyknightly1659 2 года назад

Great knowledge and high quality work, thanks Lewis

@shigthehandyman 3 года назад

So good! Great tips Spencer…thanks!!

@3345arjd 3 года назад

f s blades are the best hands down. 27 years cabinet shop all i use. love your channel. you taughtme quite a few things

@ericbaldridge4211 Год назад

Much appreciated. You hit every question I’ve had. No more box store bargain blades.

@diverdave4056 2 года назад

a long time ago before track saws were invented ... I had to cut solid maple panels that were finished - face up with my Skil worm drive ... I asked the tool store manager IF they might have a saw blade that will give me the cleanest cut ? With out missing a beat , he showed me the TENRYU blades and he said , that YES they do cost more BUT they will give you the cleanest cut and they will last a long time before needing to be resharpened ! Well he didn't lie - every cut was perfect - no chips or splinters and no need to sand the cut smooth . Since that day I have only bought the blades that TENRYU makes . So unless your using a saw to do demo work - don;t waste your money on a cheap saw blade

@danpelletier6727 3 года назад

As always, fantastic information Spencer. You've also triggered a ton of great comments from other experienced professionals. I'm not a professional, just a reasonably talented DIY'r. It's all good for a guy like me looking to up my game. I always look forward to your video drops, keep 'em coming!

@sprintspirit8457 3 года назад

Great way to end a Friday!

@woodworkaf 3 года назад

Great video, thanks Spencer!

@howardlaunius7484 3 года назад

Very informative video. Thanks Spencer.

@rauladame2105 2 года назад

Clean blades are a must. I also use the blade cleaning solvent. I wax my blades after I clean them. I have not had any more problems with pitch/glue build up with the added step of waxing. I wax the cutting platforms as we, like my table of the table saw. This content is extremely helpful and also accurate in explaining saw blade best practices. Great info.

@InsiderCarpentry 3 года назад

Thanks for supporting this channel by visiting these affiliate links!!!::: My favorite Blades: Favorite Miter Saw Blade - amzn.to/3wJkEbC (Sub-Micron Grade Extended Life Carbide and 6 degree hook) I USE THE SM6300 personally NOTE THE LM6300 is not as high quality carbide and has a more negative hook angle. I think a negative 5 degree is ideal for sliding compound miter saws. Favorite Table Saw Blade - amzn.to/3fy6gNn Blade Cleaning Solution - amzn.to/3vLCIkY Blade Cleaning Brushes - amzn.to/2S2WWsb Blade Cleaning Plastic Container - amzn.to/3p3CQKr Rockler Blade Cleaning Container - www.rockler.com/router-bit-an...

@josephmerritt1411 Год назад

As an amateur, I have learned much from your videos. I am starting a new home build project and information from this video will be put to use. Your tip about blade cleaning will be also applied to the chain for my chainsaw. Similar issue with build-up on the cutting surfaces.

@user-ed5jh3ff6u 3 года назад

Matsushita was always blade of choice, cut better dull then most blades sharp, haven’t had good luck with reshaping, still have large inventory of pristine used blades, definitely going to try out your guys on one, high dollar blades make you cry if you hit a nail. Thanks buddy

@rauljr9869 2 года назад

Awesome knowledge you shared with us, greatly appreciate your efforts!

@m3hsid10 3 года назад

Awesome video! Thank you for the great content!

@mattbowers5342 3 года назад

Thank you for the awesome information! Bookmarked the sharpening service for the next time. My local guy in NW Ohio does a good job, but it takes 6 weeks normally and costs much more!

@cletustollery6914 3 года назад

As a trim carpenter and cabinet maker for 30 years, kudos on this video. Years ago I bought a Forrest blade and have never bought another brand since. Their sharpening is amazing and they sharpen almost anything from saw blades, planer knives, router bits, lathe tools and jointer knives. As loyal, stubborn and old as I am, I might grab a FS blade.

@stumpbumpers Год назад

Same, but I dare say, my experience has shown a professional sharpening is the key component. I think the heavier blades are better because of momentum more carbide. I really don’t think 90% of woodworkers could tell a difference in a cheap blade vs a quality blade after a professional sharpening.

@corcoransullivan1562 Год назад

Another great vid. Always learn something watching you.

@DT11acs 3 года назад

100K right around the corner. Well done fella and Hi from Scotland

@davesatosky5840 3 года назад

i also user those fs tool blades because my local sharpener sells them, your the first person i've ever heard recommend them. A&H sharpens them close to 20 times, which i have sharpened bi weekly just because i've become so spoiled with sharp blades that i cant stand when they show any signs of dulling. glad i found your channel, you got a new subscriber

@jgarard111482 3 года назад

Great content, as always!

@1qikz210 Год назад

During my woodworking / carpentry career I chose to help (as an apprentice) an up and coming sharpening operation who had decades of experience, but was struggling to get his operation off the ground. It was one of the best choices I've made. We worked hard, in rough shop conditions, and ordered a lot of late night take out pizza. 20 + years later he passed his operation down to his son and they have expanded into a very successful operation. His gained knowledge was key to providing top quality services, and intelligent advice, to his customers which simply didn't understand anything beyond "dull and sharp". Having someone who knows the mechanics of cutting tools is huge. Hamronale Carpentry

@AngelMartinez-zx6mk 2 года назад

Great tips brother. Thank you!

@palettetools6461 3 года назад

One of the best channels on RU-vid.

@jimbtv Год назад

Excellent video! Thank you.

@andyeckles4158 2 года назад

Thanks Spencer. I was always sending my blades in to get sharpened to remove that *gunk* as I called it. It never occurred to me to research how to clean them myself. I used your link below to purchase the kit. Hope you got your commission. Andy

@paxtonquigley1725 3 года назад

Your videos are really first class. A gentleman and very professional tradesman. You are an example of what we should strive to be. An example for others who is knowledgeable and willing to teach. Thank you. Be well.

@InsiderCarpentry 3 года назад

Thanks 👍

@mattschoular8844 3 года назад

As always, you get what you pay for. Thanks Spencer..

@lindamarsden8024 3 года назад

Thank you, this is a fantastic video with invaluable information.

@nicholasnews5983 Год назад

Cool guy explaining cool details on cutting blades

@colinrussell4707 3 года назад

Great video as usual!

@Rubydoo61 Год назад

Excellent video. Very informative. Thank you!

@bryanhall9996 2 года назад

Well, I finally dulled the stock blade that came with my new DW716XPS. I bought an FS Tools blade to go with it based on your recommendations when I bought it a couple months back. Threw it in last night so I could finish the walnut miters on my builtins and make the cuts for my mantle. Without a doubt, the smoothest, easiest, cleanest cuts I've ever made. It can't even be compared to the blades at the box stores, it's leaps and bounds ahead of them. It's going to be a joy to work with, should increase my efficiency, and my clients will get better results in shorter amounts of time. Thanks again for an awesome video and recommendation Spencer!

@InsiderCarpentry 2 года назад

You bet. That blade spins so good on a 716. Probably my favorite cutting combo.

@kevinparmelee5609 3 года назад

Quinn and FS Tools just got 99,000 new customers when this video posted

@InsiderCarpentry 3 года назад

I'm happy to send business to good companies that help us do our job better.

@Cousin.Justin 3 года назад

*Welcome Back* 🤜🏻💥🤛🏻

@allenguffey9370 4 месяца назад

Great video as always lots of good information

@Hvn1957 Год назад

I think Freud and CMT get sold a little short. In our shop, we use mostly Forrest blades. However, there are several Freud blades in use, on miter saws and lighter duty tables saws. They perform quite well if used judiciously. Our philosophy is they get one sharpening, then out to pasture. Where the really good blades shine is in the mill. We have two big old Dewalt 14” radial arm saws, one for rough and one for fine. We also have an old Clement table saw with power feed for rough rips, and a big Tannewitz also with power feed, for all the fine rips. These four saws are in use eight hours a day, all year round. They have the highest quality blades we can get. Thanks for your excellent content! You really spend the time to explain thoroughly. Your care and thoughtfulness is appreciated. PS You mentioned Southern Yellow (Short Leaf) Pine. Years ago we ran a ton of that stuff for structural components. It’s the worst wood on tools I’ve ever had the displeasure to mill. But man is it robust!

@violettownmicroenterprises1528 Год назад

excellent. I've learnt quite a lot of important information. Thank you.

@josephmccann4143 11 месяцев назад

Very informative, as always.

@whales302 3 года назад

Love the Tenryu Gold Medal blade and I've run a lot of blades. Super quiet and deadly sharp. I agree on sharpeners....none of this matters if you don't have a high quality knowledgeable sharpener.

@wilkinsoncarpentry6278 3 года назад

Great video mate

@dougprentice1363 3 месяца назад

I am very happy with ridge carbide blades that stumpy nubs recommends. I put a note on my blade storage box to remind me to send them to quinn when they need to be reshaped. Nice video

@terryduprie6313 2 года назад

Very informative video. I really appreciate you sharing your lessons learned and expertise. Will definitely use your links for some of this gear. Thank you!!!

@andrelevesque6300 Год назад

Great content. Keep it coming.

@donf1526 2 года назад

Awesome info!!!

@haroldaubry8344 2 года назад

Great review!

@ronallen6578 2 года назад

Great info video. Thank you

@FredD63 2 года назад

Great tips to know I use 80t and 60t blades most of the time

@billbasta1548 Год назад

Great info, thanks.

@woodturnermark8529 Год назад

Great video, I also agree that you get what you pay for, I clean my blades with a table spoon of Spic and Span (one box will last a life time) with warm water, soak for about 15 minutes and clean with a brass brush, like new !

@bocan3189 2 года назад

Thank you Spencer. I learned invaluably good information from you here... I am surprised I didn't think to clean my blades without being educated to do so, my attention to detail must be slacking. I clean everything else in my world pretty fastidiously. You've earned a new sub's. Carry on Sir!

@jimanderson4495 11 месяцев назад

GREAT content. Thanks

@DadzorRules 3 года назад

Outstanding video! You just acquired a new follower. Thanks for the great info.

@A_Plus_Finish_Carpentry 9 месяцев назад

Great content in this video. Keep up the good work, sir.

@monteglover4133 3 года назад

👍👍 I’ll definitely agree with cleaning and a high quality full kerf blade, do how ever do use separate blades for plywood, ... A high quality rip blade will often leave a glue ready cut. I was a part time cabinet maker, unfortunately my shop has been setting mostly unused for a few years due to illnesses.

@randalljaynes8628 3 года назад

I learned a lot, Thanks

@ercaner9614 2 года назад

Just discovered your chanel mate. I am a metal worker that dabbles in carpentry and find your posts valuable. Look forward to more posts. Sydney Australia

@frankkenny4873 2 года назад

really enjoy your vids they are very helpful

@damianvazquez-oi3qj Год назад

thank you for your videos they are very helpful

@yt66228 3 года назад

When I first started working in carpentry, I would buy mid-priced blades. After a while, I spent the money on a high-quality blade (Ridge Carbide) I have been converted ever since. The high-quality blade is a bigger bang for your buck. Never going back!

@jncn1490 3 года назад

Great job ,

@sharkatk9 2 года назад

Excellent, excellent, excellent Thank you!

@DrWes1962 2 месяца назад

My dad was a master woodworker and I've tried to improve upon his work over the years. I've built a ton of stuff and NOBODY ever told me about cleaning my blades. I feel real dumb. But I'm going t go to work on that. Still considering the ROI on the good blade sharpening plan. But you're pitch was pretty damn good. Got me thinking.

@kong_dong_usmc6651 Год назад

Great video, I'm glad I found it even if a few years too late. I learned a lot I wish I knew sooner as well.

@1982nsu 9 месяцев назад

Another good reason for keeping blades clean is to prevent blade warpage 05:51 due to resin/pitch causing excessive heat build-up along the periphery of the blade.

@Tool-Meister 3 года назад

I’ve used what I consider professional grade blades since 1985. I’ve tried several brands and a couple of pro sharpening services. I’ve used Tynrue, Ridge Carbide, Forrest, etc. I do own a couple of Freud and DiabIo blades but found their general purpose blades don’t really compare to the pro grade blades over time. I too keep a couple of “beater” blades on hand for really nasty stock including MDF sheet-goods. I still have my original 1986 Forrest Woodworker II. It’s been sharpened by Forrest many times . It’s been used on three different table saws including a 1-1/2 hp contractors saw and my 5hp cabinet saw. I concur. Invest in one or more pro-grade blades and you will save money overall and have superior results. My experiences with miter saws varies somewhat. The factory blade on my mid-80’s Porter Cable miter saw was awful. I replaced it with a Ridge Carbide 50 tooth, 10”, chop-saw blade. It was so terrific I’ve kept the PC for special setups, etc. On the other hand my pro blades purchased for my Festool Kapex saw have not proven to be an improvement over Festool’s blades. I’ve had my 60 & 80 tooth Festool blades sharpened by Forrest with excellent results. Your video is excellent advice for so many craftspersons wondering if it’s all worth it. I echo a resounding YES! Even hobbyists should buy pro-grade blades and have them sharpened by Ridge Carbide, Forrest, or equivalent sharpening services. It’s actually one of the highest return-on-investment upgrades they can buy!

@InsiderCarpentry 3 года назад

Thanks for the reply! I think the kapex is a unique saw in the way it spins the blade. It is underpowered compared to most miter saw. I always ran tenry silencers on my kapexes and they were soso blades. Festool may be the one exception in that they actually give you the tool with a high quality blade on it.

@bigchief113 6 месяцев назад

Excellent content

@michaelnilson9876 11 месяцев назад

Awesome job

@woodmasterguy 3 года назад

For sure, could not agree more, especially keeping blades clean. I decided awhile back to invest in a really decent sharpener, Hask Pro universalsharpener, to sharpen all my blades, 6 1/2" through 12" tablesaw and miter blades, plus being able to sharpen hole saws and router bits. Used a few sharpening compaines in my day and went through a few sharpening machines, but hopefully this will be my last one to purchase...

@shelton0181 Год назад

I’ve just recently switched from Amana thin kerf blades to Ridge Carbide thick kerf blades. The cut quality is superior with the Ridge Carbide blades, hands down! I’ll never go back to anything less than a 0.125 kerf. Thanks for the video. Well done.