Blink Sync Module 2 - Initial Configuration

Подписаться 8 тыс.

Просмотров 284 тыс.

50% 1

In this video we share with you how setting up the Blink Sync Module works. We have tested it for over a month and found many aspects to highlight and many others to improve.
In this video just how to set it up, if you want to know what we think about this module and the blink mini, watch the following video:
• Blink Sync Module 2 - ... (Blink Sync Module 2 - Review of an alternative to cloud storage from Blink)
Let us show you what you get and what to expect from this great idea from Blink.
The Hardware you watched in this video:
Blink sync module: amzn.to/3BLDUIY
Blink Mini Camera: amzn.to/3sgko4j
Amazon Echo Show 8: amzn.to/3BURI43
Amazon Echo Show 10: amzn.to/3hf2Lvy
Amazon Echo Show 15: amzn.to/3BKPvrW
Other Blink Cameras not seen in this video but supported by it::
Outdoor Blink Camera Kit with One Blink Sync Module Completely wireless: amzn.to/3HfqYMH
Indoor Blink Camera Kit with One Blink Sync Module Completely wireless: amzn.to/3BOjMWO
Just an Indoor Blink Camera (completely wireless) : amzn.to/3BMgROl
ALTERNATIVES TO BLINK:
Laxihub Outdoor Camera: amzn.to/3wuzRR1
Laxihub 5G camera: amzn.to/3Ih7zeT
Laxihub P2: amzn.to/3MZ9s3i
Reolink Solar Powered Camera 2K resolution: amzn.to/3tdFYXD

Наука

Опубликовано:

18 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 160

@275MsParis Год назад

Thank you very much it was easy to install

@vegeta7328 2 года назад

Thanks!

@jamesbondbaugh1252 2 года назад

I can’t get it connected, I’ve gone through the process of trying to get it to sync with my wifi about 20 times and it’ll say wrong password but I’m entering the correct one

@noorabdi3459 2 года назад

Any fixes

@jamesbondbaugh1252 2 года назад

@@noorabdi3459 nothing yet, maybe my wifi router is too old, it’s a 5 yr old net gear router

@TechnologyMoments 2 года назад

Hello James, I would think there is a problem with the router's wifi or your AP, whichever you use. Why don't you try with another wifi, or at a friends house to rule out trouble with the Blink Module. It is always an option you may have received a defective unit. Also check firmware updates of your Netgear router, or even if the region is correct.

@MoreOffTyy 2 года назад

I swear it’s saying the same for mine

@MoreOffTyy 2 года назад

@@jamesbondbaugh1252 I just figured it out for my problem. Mine was telling me that the password was wrong , and couldn’t connect to my Wi-Fi. But I was setting it up on my IPhone 13 Pro Max , but I do have a iPhone 11 as a backup phone and I decided to download the app on there and try the set up process on my 11 and everything worked then. So idk if it’s just not upgraded and updated to work for setting it up with the IOS that’s on my 13 or not or what. But it did work on my 11

@SkyBySkyBySky Год назад

Hello! I bought 2 Blink cameras, one is the Blink outdoor 3rd gen and the other one is the Doorbell camera. Can they both be on the same module 2 device? 😊

@TechnologyMoments Год назад

That is exactly the way I have it, it works very good. Always instal a 64 GB USB at least and beware Blink does not automatically overwrite older files. Don't know really why.

@sammyrizoi431 7 месяцев назад

I wonder what type of monitor (like in the video ) you have to give you the ability to see all your cameras live ?thank you

@TechnologyMoments 7 месяцев назад

One huge disadvantage from Blink: It does not support multiple live views to different cameras nor simultaneous concurrent users to one. Important to note that as it is something we've criticized.

@factmed1276 Год назад

thanks. muy bien explicado

@tomasabreu3388 Год назад

what time does it record when it detects movement without subscription only with the sync module 2?

@TechnologyMoments Год назад

Hi Tomas, maximum clip length is set to 30 seconds and it has a retrigger time of 10 seconds... Check Laxihub cams or Reolink. Are much better.

@jwilli850 Год назад

Can you add an additional sync module to your system, I have two cameras that are too far away from the sync module, so they aren’t always available. Can you use two sync modules

@TechnologyMoments Год назад

Hello, you can add another sync module, and create another system. The important thing is that if they are on the same system, they just have to have access to the same system's wifi and not physically to one another. In your case what I think you might want to consider is extending your wifi's coverage to those two cameras.

@ma5on2084 8 месяцев назад

A wifi extender will keep those other cameras in the same network

@wildwoody20 Год назад

does it still store the clips on the app on your cell phone where you can see them on your cell phone ?

@TechnologyMoments Год назад

Hello Jeff, it either stores the files in the cloud (if you have such service active) or in the blink sync module 2. Both you can check them remotely from the App.

@mariekrantz9 Год назад

If I have the mini camera and the doorbell first to I have to Uninstall everything and start with the sync module?

@TechnologyMoments Год назад

Hello Marie, no problem, you can add the sync module at any time. Good choice.

@AJ-ds9xq Год назад

Hello, my question is if I have sync module 1, if I want to upgraded to Module 2 what do I need to do? The reason I asked, my old system comes with 2 hours of free cloud storage but my concern is if I upgraded to Module 2, am I going to lose the feature 2hrs of cloud storage? Thank you!

@TechnologyMoments Год назад

Hello @AJ I think you may loose such benefit as the syncc module 1 is basically for coordinating comunications and storage in the cloud, being that the reason why they offred such 2 hours free. What they'll give you for the Sync Module 2 is one free month and then you have to pay, however remember that the Blynk Sync Module 2 (amzn.to/3NyQLV5) as you saw in this video stores locally so you do not need cloud storage unless for backup or better yet redundancy purposes.

@earvetta Год назад

Do it have a USB? If so you should be able to go on your Blink app on a computer or tablet and download the clips you want to save to one of these devices. After you have them saved if you want them on phone you can send them to your phone.

@VincentDale Год назад

I have a question. I connected the sync, added cameras, but it will not record locally. Any suggestions?

@TechnologyMoments Год назад

Three things to check there. 1 Format the drive directly by the module, 2. Check good level of motion detection, 3. Arm the system

@YouKayTen Год назад

If the home wifi drops does the cameras stop recording to sync module? Or it works via its own independent wifi network?

@TechnologyMoments Год назад

Yes, they actually stop doing their job

@YouKayTen Год назад

@@TechnologyMoments 🤦‍♂️ thanks for the reply. So effectively anyone could interfere with the signal and sabotage the CCTV operation?!! 🙀

@pattypatty718 7 месяцев назад

So if there is an internet outage the camera will not work anyway because the doorbell bd camera are connected to internet?

@tigger13texas 6 месяцев назад

Do i get/need an App from the app store, like the original app way back or is there someplace else to get Bink program/app from. Will i/can i, should i use my old paid blink account. I now have 3 new outdoor cameras along with sync module 2, and will now store on usb 128GB drive.

@TechnologyMoments 6 месяцев назад

We have always used the same Blink Home Monitor app. It has always worked great.

@BruceDavis2301 9 месяцев назад

Few questions. Does the flash drive delete the oldest video on its own once it's full? Is it the same for the sync mod 2?

@TechnologyMoments 9 месяцев назад

That is something very important we mentioned and that still has had no effect on Blink developing such feature. Once you receive the drive almost full notice, you better swap your drive for an empty one as no overwriting is available... yet (august 2023).

@BruceDavis2301 9 месяцев назад

You didn't answer about the mod itself@@TechnologyMoments

@Pranilkarki551 6 месяцев назад

Hello I have 5 cameras but only 2 caners are scheduled for backup? Any idea? I have 2 groups though.

@TechnologyMoments 6 месяцев назад

I guess that each group should have it's own SM2, as that is the way to assign each camera to record on a device locally.

@anaciasjoseph6655 Год назад

My model is not connected and when I kept trying it said my synchronized model already registered to different accounts what can I do to fix that?

@TechnologyMoments Год назад

That means your serial is associated to another account. You can contact Blenk kto solve that: support.blinkforhome.com/en_US/contact-support/blink-technical-phone-support

@joebcfcable Год назад

Does this turn the doorbell to be able to use live when i want instead when someone rings the bell or motion detection

@TechnologyMoments Год назад

Hello, It is a configurtion left for the Blink Doorbell and which device or blink mini cam you might want to use as a door bell.

@ambientsounds1416 Год назад

@@TechnologyMoments you did not answer the question, does it enable live video stream on blink doorbell?

@reactionjaylin3725 Год назад

Will the cameras still record if the module got unplugged

@TechnologyMoments Год назад

Hi, it will not record unless you have a cloud plan active. A combiation of both is a good idea.

@SoteloJ93 Год назад

I'm having problems installing. I plugged in the synch 2, the blue light is blinking and I have a solid green light. when I hit the discover device and it prompts me to join the wifi network, I hit join then it tells me to make sure the device is powered on and is near by and is powered on. the device is right next to me, blinking blue and solid green. what can i do to trouble shoot this?

@TechnologyMoments Год назад

Hello Jaime, we tried to replicate what what you are experiencing but we were not able to experiment the same issue, even with damaged USBs or incompatible networks. I would reset the device and add it again to the system. Make sure your 2.4 GHz wifi band is working too

@ddmmartin6002 Год назад

the same thing is happening to me and I still can't figure out what to do.

@SoteloJ93 Год назад

@@ddmmartin6002 I finally got it to work. What I did was reset my phone. And it worked, you could give that a try?

@ddmmartin6002 Год назад

@@SoteloJ93 Thanks for replying, I also go it to work but I just don't remember how I got it to work 🤣

@kjtraveladventures6508 Год назад

I have had the same issue, not connecting to the device, either the mini camera or the Sync module. I have RU-vidd every possible scenario to no avail. Even reset my iPhone. It asks me to join the corresponding network for each device but still won't connect or discover the device. I even changed my network to 2.4Ghz Any help appreciated before I return this. Also, the batteries in the first camera died after a few hours. Possible defective unit. It was on sale at Home Depot.

@patriciashaver489 11 месяцев назад

My sync mod 2 is connected without a usb. When i look at the list of clips on the app, it says this device is not recording clips because you do not have a storage plan. I thought the sync mod alone would allow me to record clips. Do i need a usb?

@TechnologyMoments 11 месяцев назад

Yes you do need a USB, even 32 GB USBs will let you store many days. That is one of the advantages of the USB sync, you can replace the USB while continues recording in another one.

@TechnologyMoments 11 месяцев назад

Or even go for a bigger USB drive (amzn.to/3Pw4aQz )

@rifrafbarker 5 месяцев назад

After setting up my sync module can i take it with me outside of the home and still have it record clips?

@TechnologyMoments 5 месяцев назад

I don't think so as the main objective of the Syn MOdule 2 is to sync connections from the cameras to the internet, and have the convenient local storage in case Internet fails.

@Starfox-zg4tk Год назад

What happens if I already have a nodule but it’s the first version?

@TechnologyMoments Год назад

The difference is that it synchronizes the upload of files to the cloud but it does not record locally on the USB port as version 2 does.

@Queen_Nefertari Год назад

i have question. i pay $10 a month for the blink from amazon. This $10 which i understand is for the storage of your camera recording. what if you already have the blink sync module? is blink sync module stores videos too, right?

@TechnologyMoments Год назад

That's right with the Syn Module 2 you do not need the cloud storage, unless you want it for backup purposes.

@Queen_Nefertari Год назад

@@TechnologyMoments thanks I will discontinue that $10/month then.

@MusicLuv80 Год назад

@@Queen_Nefertari How did it go? But how does the little usb store all those videos though?

@Queen_Nefertari Год назад

@@MusicLuv80 unfortunately i did not successfully connected the blink module 😩. i dont know how

@earvetta Год назад

@@Queen_Nefertari Is your router close bye if so plug it in one of the ports is how I got mine to connect to the sink module. I also use a USB for my storage.

@hananshehadeh Месяц назад

Can I add two doorbell cameras into one sync module2 ?

@TechnologyMoments Месяц назад

Absolutely. Front door and rear entrance for instance... Good luck with your projects!

@woodybeastin Год назад

Everytime I try and connect the module to my wifi, it never appears in the list of near by Wi-Fi’s even though I go to my settings and I see my network on there

@TechnologyMoments Год назад

Hi, Just like with blink mini, it may be due to the fact that these only connect to 2.4 GHz networks, and it is very common in many routers or APs to have both networks separated. Make sure you are connected to the network that the module is gonna use (2.4 GHz band)

@woodybeastin Год назад

@@TechnologyMoments i figured it out. that was it, I wasn't trying to connect to the 2.4ghz network. thank you!

@vinvev2427 8 месяцев назад

Hi, I understand the sync module to needs to be near my router. What if I am only able to get my sync module twenty feet away, closer to one of the cameras. Does the camera get the Wi-Fi signal from the sync module or from my router? If the sync module is far away from my router, will it still record to my thumb drive? My router is far away from my cameras, should I put the sync module in the middle?

@TechnologyMoments 8 месяцев назад

Near the router or AP is ideal. It does not benefit to be close to the cameras. Both connect to the WiFi and not to one another.

@luciasabrinadimaria614 3 месяца назад

What is the max distance of camera from module?

@shautysexiey Год назад

My doorbell is already connected, but the 2 cameras dont give me an option to connect to the module.

@TechnologyMoments Год назад

That is not common. I would reset them and reconfigure them from zero. It shouldn´t take more than two minutes.

@Chazz0010 Год назад

You need to delete/re-add them in what "system name" your Sync Module where is.

@Taylormayd02 3 месяца назад

Two things that might help. All cameras have to be added to your module not separate/system. Don't ask how I know this. Lol Yes....Adding the module does provide live view. YW

@user-emam1512 Год назад

Hello i have problem when i contact with Wi-Fi not contact and sync module LIGHT a red

@TechnologyMoments Год назад

You may be having network problems, or at least your network is not supporting 2.4 GHz wifi.

@pattypat1738 8 месяцев назад

I have a sync 2 and I thought that I could live stream from any location? I don't have Alexa. Solution?

@TechnologyMoments 8 месяцев назад

HI, yes you can actually stream to anywhere in the world without Alexa you just need the Blink App. You just need it to have Internet access.

@ksmith0110 Год назад

My module refuses to connect. When I scan the code it says it can't find the server.

@TechnologyMoments Год назад

Hello @Kris Smith if it is right after the QR scan it may be blocked by Blink Servers, check internet connection or contact blink support. blinkforhome.kustomer.help/contact/support-HJlZ2VBIH

@sudhanshutripathi5188 Месяц назад

My sync module 2 is not connecting to the network after filling correct password of the wifi and also showing red light after that...

@TechnologyMoments Месяц назад

If you made sure the network is in the 2.4 GHz band, which even if you think it is, is better to make sure. If after having it reset still no luck, you should contact customer support. support.blinkforhome.com/en_US/contact-support

@sedamcetiridvanulasest4567 10 месяцев назад

Is it usb necessary? Can it work without?

@TechnologyMoments 10 месяцев назад

You can work without it and it will be of great benefit like making batteries of your devices last longer. USB is just for convenient local storage instead of cloud recording.

@rudyaguilar6504 Месяц назад

If you don’t have this, how long will the video last to see? Hours or days?

@TechnologyMoments Месяц назад

You can actually save months of clips on cloud storage. If you don't, and you don't get the module, you won't have any space for storage.

@rudyaguilar6504 Месяц назад

@@TechnologyMoments Ok So without any cloud or monthly, I won’t be able to see videos I missed form 1 minute and more?

@luciaaguirre784 Месяц назад

Is the sync module 2 necessary

@TechnologyMoments Месяц назад

It is particularly useful but not necessary, specially if you use several cameras and they are battery operated you'll see a better lasting battery. Also the convenience of local storage.

@mitzebender4679 8 месяцев назад

My sync module 2 broke so I had to buy another one. But now I can't get it to connect.

@TechnologyMoments 8 месяцев назад

Disable temporarily the 5Ghz network, so your cellphone where you are setting it up from is also connected to the same network. Even activate bluetooth. It also may be due to restrictions in terms of permissions to the App, if problem persists, uninstall and reinstall the app, and give all permissions.

@TheLastJayL 11 месяцев назад

The system won’t take my password. I have troubleshot everything and still nothing.

@TechnologyMoments 11 месяцев назад

I would suggest you contact Blink for support. Password issues do not have anything to do with hardware... (support.blinkforhome.com/en_US/contact-support/blink-technical-phone-support )

@TheLastJayL 11 месяцев назад

@@TechnologyMoments I got it to work. I forgot what I did though. It was strange but I am good now. Troubleshooting is for the birds. Should be just plug and play.

@ktchelseafamily3314 3 месяца назад

Cute

@fabsloks2788 Год назад

Synch module shows connected as a Amazon echo device

@TechnologyMoments Год назад

That's very weird. We'll see if a can get back to you with info about that...

@gazzakirk4243 4 месяца назад

Is the Blink account free or there monthly charges

@TechnologyMoments 4 месяца назад

The Blink account is free. You will only be charged if you susbscribe to a monthly cloud storage plan. Blink offers you the Blink Sync Module 2 ( amzn.to/3x5WOsw ) which lets you record locally for that matter

@bobsponge1877 Год назад

So my free subscription is over, for my camera. I bought a sync 2, usb memory stick, so far so good, but it won't save anything to the usb on the sync 2. I can't find anything yet, that shows how to set this part up.

@TechnologyMoments Год назад

I understand, you may want to try two things: First, make sure system is armed and all cameras belong to that system (go to the syn module 2 and check your cameras are listed there under "local storage". Second, make sure your USB drive was formated from the sync module (I know it works out of the box but it is the only way to make sure it will absolutely work). To do this format it in windows or mac to something different then, have the Sync module 2 aske you if you want to format it. Good luck

@bobsponge1877 Год назад

@@TechnologyMoments I was with you, until you got to formatting the usb from the sync? How exactly? I see nothing about formatting the drive on my phone. Thanks for the reply.

@easy56wedge 4 месяца назад

When I try to set up the module I keep getting an error saying my password is incorrect. I am 100% positive that the password I’m using is correct! I’ve tried setting up a new system - same error. The thing is, I’ve used this module and single outdoor camera before - I’m only moving it indoors! The room I’m moving it to also has our Xfinity router/modem. Strength is signal should not be a problem!

@TechnologyMoments 4 месяца назад

Hi, just to make sure there is no problem with your account password, I would suggest, like I did at one moment, to install the Blink App in another mobile device, very quickly you'll know if the password is the problem. If you are referring to the wifi password, two suggestions, "erase" the wifi network from your phone and reconnect, and if everything OK, make sure your router/Access Point is using the 2.4 GHz band as it is the one Blink devices currently use.

@RaainNinety3 7 месяцев назад

I bought this product a while back not even used. I’ve never made an account yet it’s telling that it’s been registered to a different account. Did anybody else have this problem?

@TechnologyMoments 7 месяцев назад

In that case I would contact Blink. There shouldn't be any problem: support.blinkforhome.com/en_US/contact-support/blink-technical-phone-support

@user-oc9yt2xt5m 10 месяцев назад

the connecting cord that came with the module does not fit the module. Now what?

@TechnologyMoments 10 месяцев назад

Not worries just use another USB type B cable and plug it. It is a 5 watt wall adapter so most cables will work.

@user-oc9yt2xt5m 10 месяцев назад

@@TechnologyMoments Thanks. I neglected to remove the protective tape. Once I did this, the connection was fine.

@HappyQuailsLC Год назад

I wish you had mentioned what the capacity of the flash drive is. We have to select one since it doesn’t come with it. It stands to reason that we would need to know, after all we will want to use the highest capacity, so it must be found in order to do so. And I don’t know why they wouldn’t prefer to use a micro SD card since they are far superior in repetitively recording and reading devices.

@TechnologyMoments Год назад

You are absolutely right. Thanks for your comments. USB works very well though.

@TheeBearMom Год назад

The Sync Module 2 tells you it takes a maximum of 256GBs... A simple Google search could have given you the information needed. This is a tutorial not a spec rundown.

@cliffordsmith6368 11 месяцев назад

I can't get that page on my phone

@TechnologyMoments 11 месяцев назад

If you are talking about the support page, try this link: support.blinkforhome.com/en_US/contact-support

@AnaMartinez-no2ed 3 месяца назад

I bought a USB Flash Drive 1TB and it says it’s not compatible !!

@TechnologyMoments 3 месяца назад

We've used it with up to 256 GB successfully. I believe that is the limit. (amzn.to/3SZGjtY )

@AnaMartinez-no2ed 3 месяца назад

@@TechnologyMoments that makes sense. Thank you.

@gseytah2002 11 месяцев назад

Mines not been working it keeps saying failed to connect incorrect Pw when its not.. 🤔 🙄 😡🤬

@TechnologyMoments 11 месяцев назад

I would guess is not the password for thew 2.4 GHz password. The most common error is to try to make it connect to the 5 GHz network.

@tonijermont9529 10 месяцев назад

I have 5g internet will that work

@TechnologyMoments 10 месяцев назад

The current module connects to 2.4 GHz networks. Good question that is something very important to check or preconfigure.

@AmericanGangstaSociety2023 Год назад

It’s taking forever to sync my module

@TechnologyMoments Год назад

Check your wifi at 2.4 GHz and see if that is the problem. Power Cycle the access point or router and try again. Is not common to have such problem. And see if you are setting up the device from a 2.4 GHz network.

@AmericanGangstaSociety2023 Год назад

@@TechnologyMoments I’m confused by what you said

@DOLRED Год назад

Took a considerable amount of effort to reconnect my Sync Module 2 to Blink Servers. I bought a new cell phone and Blink did not like that. I had to use both phones to get this Blink thing done. A joke really.

@TechnologyMoments Год назад

You are absolutelly right. That should not happen. We keep recommending Arenti/Laxihub cams as an alternative. They do also have a doorbell option.

@user-emam1512 Год назад

Password error

@TechnologyMoments Год назад

Password error may be a whole different problem. Set it to a simple password, connect successfully and then add some complexity to it.

@lucretiawrolstad3997 Год назад

This guy this guy jabbers so fast and not real clear speech that I am having a hard time understanding step by step what I'm supposed to do slow down

@TechnologyMoments Год назад

Sorry about that, we'll consider that for future videos!

@zulhilminajmi8560 9 месяцев назад

I was looking for an outdoor camera to keep an eye on my dogs in the yard when I'm not home. ru-vid.comUgkxOXxsTZ3ptV_Pk0fFl8bNZvVqeoqBQFwe Tried a different one that was absolutely terrible, so I got these instead. They work perfectly! With 3 of these cameras I can see every corner of the yard, and they were very easy to set up. The best part is I only get the footage I want to see, not hours of videos of the bird feeder swaying in the breeze.