Blue Iris + Deepstack BUILT IN! Full Walk Through - Go from beginner to expert in one video.

Подписаться 479 тыс.

Просмотров 252 тыс.

50% 1

2023 update here: • FREE License Plate Rea... Deep Stack AI Computer Vision combined with Blue Iris NVR Software is the most powerful option on the market for security camera recording. Thank you to #Govee for sponsoring this video.
Check out Govee's RGBIC Strips 30% off (6th-9th): amzn.to/3vLX4uj
and Mother's Day Promotion: amzn.to/2SrknuZ
Blue Iris Build:
Blue Iris NVR Software: bit.ly/3dwlGRg
Example Ebay Listing Dell Optiplex: ebay.us/tnqxZ3
Surveillance Grade Hard Drive: amzn.to/3apRpl6
SATA Power Splitter: amzn.to/3tnU1a6
Deep Stack for Windows Download: github.com/johnolafenwa/DeepS...
*As an Amazon Affiliate I earn a commission on qualifying purchases at no cost to you*
*As an eBay Affiliate I earn a commission on qualifying purchases at no cost to you*
RLC-810A Friendly Alternate Configuration: www.thesmarthomehookup.com/al...
Visit my website: www.TheSmartHomeHookUp.com
Follow me on Twitter: @TheHookUp1
Join me on Facebook: groups/47381...
Support my channel:
Patreon: / thehookup
Music by www.BenSound.com
0:00 Intro
1:30 Blue Iris Hardware
4:51 Blue Iris and Deepstack Installation
6:15 Blue Iris Global Settings
11:05 Potential Issues
12:51 Adding ONVIF Cameras
14:40 Camera Settings
19:33 Check Your Settings
21:29 Optimizing Motion Detection

Наука

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 717

@metarichard 3 года назад

Videos like this are why your channel is one of the best on RU-vid! You move so fast it never gets boring and when I am going through the steps I just stop and start as needed, keep it up Rob you are killing it!

@ryansmith2418 3 года назад

I just followed along with this and you have gotten me further in 30 min than I have on my own in a month. Thanks!

@martyb3783 Год назад

I just commissioned my Blue Iris NVR with 6 cameras. I plan on adding 8 more. I had to buy a new PC for the added horsepower requirements but it works very VERY well. I could not have done it without your videos. You are very well spoken, to the point and make things easy to understand. VERY well done!

@MatSmithLondon 3 года назад

The vid I've been waiting for! Look forward to watching this later

@keithmycek2768 3 года назад

This is SO AWESOME. Tight integration of DeepStack in Blue Iris is amazing, and you did a great job explaining how to set it up. Since it took me so long to get my stuff together, I enjoyed your previous setup with AI Tool for about one week before setting this up... LOL!

@Nar1117 3 года назад

This is amazing! I am so glad they added native support for DeepStack! Awesome update rob!

@bertmonkey8457 3 года назад

Thanks AGAIN for the great video. I have been running Blue Iris for 6 months and it works great... Now I need to spend the time to get the most from DeepStack... Love your work!

@hunterlovvorn5587 3 года назад

Got my blue iris license just last night. Perfect timing! Thank you for this wonderful video

@filippusdahlin6403 3 года назад

Thank you Rob! Setting this up was on my todo list, you’ve made it so much easier now!

@bigdaddy7741 3 года назад

Finally, I was able to get AI working in BI. Been weeks trying. You are truly an asset to the BI community. Great job and thank you...

@SFrioux 3 года назад

I found your earlier video from a year ago about using AITool, and just got it all setup last week. I saw the settings in the newest Blue Iris software for Deepstack, but wanting to get a working solution, I ignored those until I could get around to playing with it. I'm glad to see you rethought this with the newest Blue Iris software and can't wait to change my config over to what you suggested here. Stellar job!! Keep up the great work!

@sdfhjklhsfdjdsflhkds 3 года назад

Thanks Rob! I've been waiting for this one.

@RicardoMaranhaoMD 3 года назад

Perfect! Can't wait for the face analysis with deepstack ai in blue iris!! :)

@Py7hon 3 года назад

Just wanted to say thank you for this! Was honestly thinking about going the Ubiquity route until watching your video last month. Love the results from BI + DeepStack!

@BobBostwick1 3 года назад

Thank you sir! I'm upgrading my BI instance today. Awesome timing!

@timpmcfadden 3 года назад

These recommendations are really great. I was missing a lot of alerts with the out of the box setup and these seem to fix it. One thing I would add. Under Alerts, Notifications, Push Notification. Change from Alert Image to 10-second GIF. This will give you a quick video in the notifications instead of having to open the app every time.

@TonyYoung808 2 года назад

I didn't even know this was there. Flipped it on! Cheers!

@ChuckClaunch 2 года назад

I know it's not much but I've been a subscriber for a while and love your videos. I've run Blue Iris for years and recently redid it with a different machine, your guide here was way better than the way I had it previously set up and it works awesome now! Six cameras and less than 10% CPU with full up object detection is awesome! Thanks!

@TheHookUp 2 года назад

Love to hear that Chuck, glad you are back up and running!

@vPeteWalker 3 года назад

Rob, wow. This is exactly what I need for my upcoming camera install. I cannot wait to get everything in, and set up... so I can step through this video! Wow!

@Nathan0A 3 года назад

beware blueiris is not stable software

@kensko 2 года назад

Can't believe you're not getting more views. Thank you for your content!

@JohnKiniston 3 года назад

Great video! I just removed all the old deepstack docker containers from your previous video on the topic, updated my HD cameras, and deleted my SD cameras and everything is working great.

@willg4625 3 года назад

Thank you! I've been waiting for this video! 😃

@FreshfrogmarketingUk 3 года назад

Awesome video. Never played with any of this software before, but I followed along, and have everything working perfectly. Thank you.

@Bobtb 3 года назад

And another superb video! Thanks for this high quality content!

@dablet 24 дня назад

this is crazy good. thank you!

@carltonwbrooks 3 года назад

Just set up BI yesterday based on your last video. Now I think that I will just start from scratch since there seems to be a lot of changes. Thanks

@AIONizandoCR 9 месяцев назад

Finally got my first Blue Iris server working with DeepStack GPU, thanks to your excellent course, thank you!

@nyasha1530 3 года назад

Great video, got it setup on the weekend and the detections are working great. Now to integrate the detections with MQTT and Home Assistant

@wakieboy8 3 года назад

Thanks for this video, super helpful. Would love to see a video on your BlueIris / Home Assistant / Node RED integration!

@MRL3234 3 года назад

Once again... Amazing presentation... Excellent communicator.

@BennProbett 2 года назад

Great video so easy to follow, wish I watched this prior to setting up all my camera's would have saved so much time!

@mattcero1 2 года назад

Phenomanally great video guy. Thanks for making and sharing this!

@caffeinatedfunctionality 3 года назад

Crap, going to have to make time for this today! Thanks man looking forward to this one.

@karilehtimaki5455 3 года назад

Thanks for all the valuable and relevant information here. Just set up my own BI+DS here following these instructions.

@rankinstudio 3 года назад

I had the same issues with the pre trigger buffer not working. I fixed it on every camera I have by unchecking "Combine or cut.." and checking "Cut video when triggered". Great video

@ssss-df5qz 2 года назад

Great video - got myself an optiplex i7 6700k, 2Tb WD purple and blue iris, all connected over a Netgear ProSafe 8 switch :) Very happy.

@d0hanzibi 3 года назад

Awesome, thanks for the video!

@DodgyBrothersEngineering 3 года назад

Very tempted to try this on my sister's Blue Iris setup.

@MrLentomannen3 2 года назад

Thanks, I now feel much more safe trying out my settings.

@vfast007 Год назад

Great video and I've referenced it many time. Thanks for compiling.

@GearshiftsandGrins 2 года назад

Thank you for posting this!

@tgschaef 3 года назад

Perfect update! Your previous video got me going and Blue Iris’ AI update was awesome. My greatest automation is when there is camera motion in the garage (pre AI for speed), Home Assistant tells the Shelly to turn on my garage lights until there is no motion +5 minutes.

@christopher79 3 года назад

Ha. This is exactly what I want to do.

@tgschaef 3 года назад

@@christopher79 it’s never been easier. Which is an odd statement. “It’s much easier than it used to be!” That’s much better! 🤪 Honestly, it’s not terribly difficult. I also have triggers for porch lights based on detecting only dogs or people (depending on what I expect or don’t want to be there). The AI has helped to keep my house from being a disco show all night due to triggers by bugs and bats.

@adisaksukul8088 3 года назад

Great content as usual. Thank you!

@mattbrumelow9303 2 года назад

Thank you so much. Your videos are a huge help setting up my smart home.

@sailingwithmikey 2 года назад

Awesome video mate, thanks very much - helped me loads, as a noob, in getting it all set up

@plutinicus Год назад

Amazing review and insights. Learnt tons. Thank you so much.

@sartoaj 3 года назад

Blue Iris should be paying you for this video. Its above and beyond any of their tutorials.

@GregUzelac 3 года назад

Great info. Wonderful presentation.

@ruinedeco3526 3 года назад

This video finally made me feel confident I can do this all myself 😂

@uss_04 3 года назад

Love this video format

@Jannick-mp7bf 3 года назад

Great video! Just bought a dedicated NVR windows machine today and already got object detection working and integrated to MQTT. Without your help this wouldn’t be possible. Really nice!!

@TheHookUp 3 года назад

Nice! Hope it works well for you, definitely fun to tinker with too.

@EricHicks 3 года назад

Great video, and funny enough today is the the expiration of my BI subscription so it's a good thing I logged into the server so now I can renew.

@stevez182 3 года назад

Again perfect timing Rob! Two Reolinks RLC-820A are arriving today and will be installed during the weekend. Thankfully I haven't purchased Blue Iris yet so I will make sure I will use the affiliate link. Thanks again for another extremely useful video. This will save several hours of my time and a lot of frustration as a new Blue Iris user.

@memogles5763 3 года назад

You’ll be frustrated, just google what Iframe interval means, Reolink doesn’t have I-frames support so you’ll miss a lot of motion events with blueiris.. :(

@stevez182 3 года назад

@@memogles5763 wow thanks for the info. I wasn't aware of that. This is why Rob added a separate article for Reolink cameras setup? Any 4k alternative to be used with Blue Iris?

@memogles5763 3 года назад

@@stevez182 stick with hikvision or dahua, you NEED Interval settings to be able to record motion without missing a single event, otherwise no matter what you do, deepstack won’t work correctly.

@stevez182 3 года назад

@@memogles5763 I was afraid that you will mention those two. Unfortunately both are not widely available in the UK (especially dahua). An option will be Ankke which is somehow related to hikvision but I am not sure if it has similar issues

@OHWRDAMI1 3 года назад

Awesome video!

@OptimusSatanas 2 года назад

So much useful info. Thanks.

@mosth8ed 2 года назад

Just an FYI, I have been running BlueIris in a docker container on Unraid for about a month now without a single issue. Just got a Jetson Nano, and am running Deepstack on it currently, which is what lead me here. I can definitely vouch for the docker container working well on my setup. (Unraid box is R5 2600, 32gb ram, I have blueiris saving to the array to save on writes to the cache and have had no problems with it.)

@marcusasteborg7762 2 года назад

Following this great guide, it's amazing. Reolink has added support to change I frame interval in their latest update for 820A.

@mogman888 2 года назад

At 17:50 you recommend to select the brand new option to record continuous+triggered but show continuous+alerts selected in the video...I don't understand the difference between the two and I also wasn't sure which you were truly suggesting we set ours to...I love all the content, keep up the great work

@jean-francoisauger6907 3 года назад

Another great video !

@austinfromaustin320 2 года назад

I did the project. So glad I did. Wired up 9 cameras :)

@TheHookUp 2 года назад

Nice!

@joelzhl 3 года назад

Great video! I follow the original video a year ago but gave up on Deepstack because the i5-7400/AI-Tool setup can only process an image every 800-1000ms. When several cameras are active, the CPU jumps to 100% and the stock cooler transforms into a jet engine. Now that Blue Iris and Deepstack both updated their software, I've managed to get the GPU version running on my 1070. The processing time came down to 20-35ms and the GPU utilization is less than 1% even when processing several cameras per second.

@TheHookUp 3 года назад

Sounds like a win to me!

@RelentlessHomesteading 2 года назад

Like drinking from a firehose -- lots of information. Saved that for when I start setting it up. Kinda doing a restart on all this - 18 months ago was setting up security cams on blue Iris on an older i7 (1st gen) PC (converted to a Xeon). Then Covid came - and we were off doing other stuff and now just coming back to this project. Will get at least a 6th gen i7 though before continuing as I'll have at least 10-12 cameras to cover our acreage here. Thanks for the wonderful tips on this - I subscribed and will be checking out your other videos.

@tomshea9404 2 года назад

Hi Rob, absolutely love your videos, have been binging them for a while. In your setup here you mention a 2TB HDD, In previous videos you’ve said 2 x 4TB, happy with different setups etc but would you normally recommend multiple HDD in a RAID config or not as you delete most footage?

@25B5VF7 3 года назад

Rob, your background as an Educator clearly shows in your presentation and I do appreciate all the hard work you're doing to make it easier for the rest of us! I am having a real problem with the implementation of this and hope that you can lead me back onto the right path. Scrupulously following your directions, my DeepStack completely fails. Once the camera detects motion, the very next log entry is "DeepStack: Not running or unreachable", followed by "DeepStack has been restarted". This results in alerting and capturing EVERYTHING. Is there a forum you'd recommend or other off-line channel that I could seek help at? Cheers, keep up the good work, and "Bravo!" on the excellent videos!!

@TheHookUp 3 года назад

If you still have active blue iris sport I’d recommend that, they’ve probably seen way more issues than me. Otherwise you can join until the hook up face book group (link in the description) and see if anyone can help you out there.

@mlutteral 3 года назад

I would have never been able to configure my -just received- annke cameras and blue iris without this video. Thank you so much. I just used your affiliate link to buy the licence for BlueIris. Greetings from Montreal

@TheHookUp 3 года назад

Glad it was helpful Martin, Cheers!

@200501012 3 года назад

Omg. Yes Rob. Just ordered cameras and blue iris. Your timing is perfect! No offence to other channels but you do the best setup walk-throughs.

@flyingwhiteindian 3 года назад

What cameras did you choose?

@MichaelMantion 3 года назад

Great videos. he could use a few self deprecating jokes or random dog cameos

@200501012 3 года назад

@@flyingwhiteindian I went with reolink cameras. They seem to be a fair price for quality.

@1tadaastu 3 года назад

Hey logged in to post that you do great videos! I saw your Ubiquiti ones which were some of the best ones Ive seen, well articulated, and clarified some networking aspects that others skim over. Great work. Hope we see other videos such as OPNsense that I am migrating to. About this BI and deep stack, i havent seen much reason to migrate from V4 to V5, you may have given me one if it works well. Hoping they sorted all the issues you brought up. Also oddly enough I have a very similar Dell i7 6th gen CPU for my BI setup for 4 years now. Glad to know it still is relevant. For your celeron comparison did you set it with h.265 or h.264 and hardware acceleration. H.265 consumes more CPU with hardware acceleration so may be it explains your issues with frames? V4 doesnt have it so I have stuck with .264 and a bigger drive. Thanks

@pageb018 3 года назад

great stuff here!

@plumros Год назад

For Reolink DUO 2 poe 4k turn off "Send RTSP keep-alives" or you'll get tons of cut outs with no signal error.

@bokenrosie 3 года назад

Thanks Rob. Awesome video. Now I have to think about upgrading my i7 computer to something newer because I really want DeepStack to work better.

@KD2HJP 3 года назад

This is spectacular.

@tekjoey 3 года назад

Absolutely Fantastic. Now I just need a money for all of this 😅

@zf4120 3 года назад

Great video! Though I came to learn about AI, it tipped me off to the fact that my cameras weren't configured right. By specifying the exact brand, BI picked up the correct substream and dropped my cpu usage from 30-40% to 5%-15%.

@martyb3783 Год назад

Thanks!

@KinCony 3 года назад

great video

@jaap7374 3 года назад

Another great video for a nice smart home project. Can you do a PI-hole video with local DNS and DHCP in combination with your unify setup?

@EMPELZIP Год назад

Great video on BI! Would love a video on BI remote/mobile access that goes deep into the mobile and browser app and into available options for setting up a remote connection (pf, vpn, ngrok, etc.) It seems to be the only information missing about BI on youtube :)

@noloboy 3 года назад

Finally a video that helped me with my Deepstack setup. I'm curious though if its possible to leave the Zones and Hotspots enabled since I don't want certain areas for Deepstack to monitor. I also wonder if "Shadow" can be used as I'm getting alerts from People and Tree shadow reflecting on my yard from 8-11am.

@optometristic 2 года назад

Great video! It encouraged me to upgrade my old BI4 to a new BI5-installation with DS. It all works amazing except for one usecase: Toddlers running on our driveway. Seems like running adults are a bit tricky to catch as well but not as tricky as kids. I have a 4K Hikvision running in 10 fps. Do you think an increase to 25 fps could improve the toddler detection in DS? Or do you have any other idea on how to improve classification of fast moving objects?

@jimbosander 2 года назад

Always great detail at a great pace, no fluff. I setup the previous AI Tool method based of your other video (2 streams per camera), then things broke after latest BI update. AGAIN, after watching one your videos, was able to get it back on track quickly. Fun note, after disabling the substreams (about 9 cameras total) from the previous setup, CPU% went from >50% to around 8-10%.

@zalllon Год назад

Sorry for not subscribing earlier, this has so much content and information it that it takes off takes a while for me to unpack… I’m barely text savvy when it comes to this type of stuff.

@Irwined 2 года назад

Love your videos and thanks! I have a camera overlooking the river in my backyard, which occasionally gets great egrets and great blue herons, among other wildlife. I would like to record them in high res. I would love if you could post a video for settings for usimg Blue Iris as a trail cam or something that would help in this effort!

@allenxd 3 года назад

Hey man thanks for all the quality content! you're awesome. just a question though have you encountered a problem in reolink cameras where it is like showing in a wrong aspect ratio in blue iris? ( kinda like when the center option is clicked in reolink gui) Just readded all my cameras and now they are all showing in a square like aspect ratio unlike before. Thanks!

@kevinschwerin1324 2 года назад

Amazing video as always! I’m struggling getting deepstack gpu working. Installing nvidia cuda and cudnn is rough and I think that’s where my problems lie. Seems like many people struggle with this and the only help I’ve found is various snippets of information on forums. Please make a video to assist us :)

@patraff1280 2 года назад

Rob, I keep recommending your videos to my tech friends. Gotta say though - you look like a criminal in your camera footage tests. Keep up the good work and honesty.

@ivanfermon5865 3 года назад

Great video. Thanks for this. Question, what format for the files? bvr or mp4?

@moitrapratik 3 года назад

Good One!

@fromcesarwithlove Год назад

Hey there! First time viewer, Loving these videos. I am moving to a new home soon with my girlfriend and son and I would like some security cameras. I am a total noob when it comes to this, I am able to follow the video pretty well. However my problem is do you have a video on setting up a wired camera and how to have it communicate with the computer so I can pick which cameras to add to the blue iris program?

@SkillshineMatt 2 года назад

Hey Rob, great video, but I am stuck on confirming what option you chose on the Record tab for the individual camera settings, you mention to set as "Continuous + Triggered" but in the video it shows you have selected "Continuous + Alerts". Can you clarify what option you are using ?

@cal3751 2 года назад

Reolink posted a firmware (yes, their second try) for the RLC-8X0A on Aug 24. It claims to support settings of 1 second. Rob, if you think this is significant, would you please update either this video or your web page instructions for the Reolink kludge? Much appreciated!

@babylonfive 3 года назад

You are really good at this. I don't have any cameras or motion systems, and don't have a need for one, yet I watched the whole thing. Great work.

@TheHookUp 3 года назад

Haha, thanks David.

@deekid30 3 года назад

Do you have a video on what POE cameras and POE Switch you recommend to use with the Blue Iris+ Deepstack?

@mejgj 2 года назад

Helping the others users: 6th Generation; Skylake 7th Generation; Kaby Lake 8th Generation, released 2017 to 2019; Coffee Lake 9th Generation, released 2018 to 2019; Coffee Lake Refresh 10th Generation, released 2019 to 2020; Comet Lake 11th Generation, released 2020 to 2021; Rocket Lake 12th Generation, TBA; Alder Lake

@paulzharyuk4153 2 года назад

Awesome video! Can you recommend hardware for a 32 camera system?

@TheHonarable1 2 года назад

Awesome video as usual...When setting up blueiris/deepstack is there a way to shade out an area you don't want monitored? Also deepstack keeps sending me alerts for vehicles parked in my driveway and on the street..is there a way I can keep that from happening? Thanks in advance

@tmputeh1429 Год назад

Awesome sharing! Thanks rob! Does blue iris + deep stack could control the PTZ in order to follow the object it tracking? If can't, is there any software/plugin that could do that? Once again, thanks!

@Gavilaso 3 года назад

Thank again!!! nice tutorial as always!!!! i just have a quick question.... after this change/move does your push notifications with camera feed on home assistant still working???? i did fallow the old video and i was able to setup some alerts. example.. when someone open my mailbox, home assistant get triggered and i get a notification and a camera feed.. like your home when someone open a window... mine just stop working.. don't know if i need to upgrade the url trigger or what is going on! lol

@wartlme Год назад

I am using a B450 elite mother board. 32 Gigs of DDR 4, Ryzen 2700. RTX 1070. 240 Gig SSD and a 1 TB spinning rust drive. Just old computer parts i had laying around. Works well. I like it, running windows 10 connected to a 55", 4k tv. Not a bad setup.

@iandowwright 3 года назад

Thanks Rob! I'm not sure which one of the many settings I just changed fixed it but my five RLC-810A's and my EZVIZ DB1 are now all recording flawlessly in Blue Iris on the Windows VM on my unRAID server.

@TheHookUp 3 года назад

Glad to hear it, cheers!

@Luuuu793 3 года назад

Could you maybe post your current settings? I still have Problems with the reolink

@TheHookUp 3 года назад

@@Luuuu793 have you tried this setup? www.thesmarthomehookup.com/alternate-blue-iris-deepstack-configuration-for-reolink-rlc-810-compatibility/

@Luuuu793 3 года назад

@@TheHookUp No, not yet. Thanks not for the link. I did not know that there is a template for alternative settings :O I hope that Reolink will soon fix the problem with the I-frame interval. But I read today in a forum that the feature was already requested in 2016, which does not give me much hope :(

@TheHookUp 3 года назад

@@Luuuu793 I think the problem is something other than the iFrame. To me it seems like a non-conforming H265 codec. If I change my other cameras to have the same iFrame as the reolink they do not experience the same issues.

@alexdominguez9165 3 года назад

Hi Rob, thank you so much for your video. Quick question, The settings for a Reolink 410 5MP will be the same as the Reolink 810A (Reolink camera software in regards encode Fluent & Clear settings)? I used the same 810A 4K settings from your video on the 5MP cameras. The 5MP cameras got frozen or have no good view in blue iris software. Again , thank you.