Тёмный
No video :(

BMW 2011 X3 xDrive F25 Transfer Case Oil Change DTF1 

Ken KanFix
Подписаться 3,8 тыс.
Просмотров 38 тыс.
50% 1

This video shows how I replaced the transfer case oil on the BMW 2011 X3 at 199K km. I used BMW DTF1 with part number 83222409710.

Опубликовано:

 

10 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@rhollyday
@rhollyday 2 года назад
Finally a clear guide for this job! Well done!
@Goji_gaming_loves_god
@Goji_gaming_loves_god Год назад
Looks nice and easy with the right tools and know how. Having mine done today by a BMW specialist.
@hassysid9338
@hassysid9338 10 месяцев назад
How much did it cost by doing with the specialist
@Goji_gaming_loves_god
@Goji_gaming_loves_god 10 месяцев назад
@@hassysid9338 £150 although hasn’t got rid of the issue. Next step will be changing the tyres
@gpost9000t
@gpost9000t 3 года назад
Good video. That fluid looked real clean for 199k.
@dougjamesvandals
@dougjamesvandals Год назад
Hmm good pt...I am debating to do mine myself...140k on it ..did the rear diff and it looked like new! I was already committed but had I known I wldnt have touched it
@dougjamesvandals
@dougjamesvandals Год назад
You have a drain plug...2014 x3 no drain plug .. had to siphon what a pain in the backside. BMW why no drain plug..hard to get all the old oil out like a drain plug allows did my best it was dark I suspect original oil 141k on the car. Not an easy job removing the support arm..again BMW come on couldve been designed to allow room for now removal.. thank you for your video buddy!! Mine was the same except for drain plug missing 😉
@rhollyday
@rhollyday 2 года назад
When BMW says "lifetime fluid" they really mean it! The transfer case cover on my 2016 North American made F25 does not have a drain hole, only a fill hole. Use a narrow jack pad under the transfer case as shown in the video to allow cross member to slide straight down. A wide rubber jack pad will obstruct removal of the cross brace.
@slopetechno
@slopetechno Год назад
Rich, did you replace yours? I also have a 2016 US made, haven't checked but it probably also doesn't have a drain plug!
@rhollyday
@rhollyday Год назад
@@slopetechno I have not tried again yet but I need to do it as I'm coming up on 100k miles. I'll use 2x4 wood between jack and transfer case so cross brace is not blocked.
@dougjamesvandals
@dougjamesvandals Год назад
Mine too...ug a 2014 x3 28i...no drain plug...1 plug to siphon out ..hate it
@dougjamesvandals
@dougjamesvandals Год назад
Yes same here...2014 no drain plug...same as rear diff...ironically the front had one thank goodness..so so odd
@rhollyday
@rhollyday Год назад
@@dougjamesvandals BMW doesn't want us changing their "Lifetime Fluid," they'd rather sell us new car. :) My BMW dealer wouldn't even quote ATF change. When pushed they quoted me $140 per quart of BMW ATF. Redline FTW! :)
@dougjamesvandals
@dougjamesvandals Год назад
This car has 199k on it? Looks brand new nice
@tareqkarim2926
@tareqkarim2926 Год назад
Thank you for sharing. Have you felt any changes on car preference before and after? Thank you again.
@kenkanfix
@kenkanfix Год назад
hi, no I didn't feel any difference after the change. But at least I know fresh fluid would help keep it going longer 😀
@danmulkiewicz5515
@danmulkiewicz5515 Год назад
Thank you for this video. Do you happen to know the torque specs for the cross member and the main bushing through bolt that you pulled? Thank you.
@dougjamesvandals
@dougjamesvandals Год назад
When in doubt tighten then another quarter turn...mine were loose didn't take much ..I tightened firmly
@michajuszczak3018
@michajuszczak3018 2 года назад
Great Job, Ken how much oil have you spent?
@kenkanfix
@kenkanfix 2 года назад
hi, I think it was about 700ml
@dougjamesvandals
@dougjamesvandals Год назад
We have a 2014 x4 28i.. love the car .. all the features except high beam assist...anyhow they didn't put a fill and separate drain plug..so it's a siphon and fill...not the best by bmw a normal drain always best to get old fluid out...
@SamuelWattOnline
@SamuelWattOnline 3 месяца назад
Did you happen to see a ground strap around there? I'm struggling to find the ground strap on my x3 2011. Isn't obvious near the front. A couple of people on forums have suggested that it's actually connected to the transfer case.
@kenkanfix
@kenkanfix 3 месяца назад
hi, do you mean the -ve/ground electrical strap? no I didn't see any straps electrical or other.
@SamuelWattOnline
@SamuelWattOnline 3 месяца назад
@@kenkanfix yes, I just found it in a really weird place under my x3. See my latest video if you’re curious. This x3 looks much cleaner than mine. 😃
@straussweekly1560
@straussweekly1560 2 года назад
Where did you get your pump cap?
@kenkanfix
@kenkanfix 2 года назад
Hi, I got it from a local auto store called supercheapauto.com.au
@GregStankus
@GregStankus 3 года назад
Did you reset the TC calibration?
@kenkanfix
@kenkanfix 3 года назад
Hi, no I didn't. Can you let me know how that's done?
@Mr-cl2bh
@Mr-cl2bh 3 года назад
@@kenkanfix u can do calibration with ista + , it resets the values
@GregStankus
@GregStankus 2 года назад
@@kenkanfix apparently with a ODB tool, like the foxwell NT530 - is able to reset the clutch packs and the oil reset for TC. I did my oil after posting a couple of weeks ago, have not reset anything, and havent run into any problems.
@dougjamesvandals
@dougjamesvandals Год назад
It's oil...I can't see how it wld impact anything .. .6 qts
@leiflillandt1488
@leiflillandt1488 11 месяцев назад
Just oil change, it doesn't change anything in how the clutch package works.
@caruanacalogero6538
@caruanacalogero6538 3 года назад
hello it is the torx bolt size please
@kenkanfix
@kenkanfix 3 года назад
Hi, there was no torx bolt. the drain and fill plugs are 14mm hex.
@caruanacalogero6538
@caruanacalogero6538 3 года назад
@@kenkanfix thank you
@marcinpawelopalka2396
@marcinpawelopalka2396 2 года назад
It's the same in n47 and n57 ? Thanks
@kenkanfix
@kenkanfix 2 года назад
Hi, the differentials should be the same. The transfer case maybe different because there are 2 models, the one in this video has a drain plug, yours may need to be drained from the fill plug using syphon or pump.
@MrRosaGardiner
@MrRosaGardiner 2 года назад
I only have 1 bolt... F25 2012 20d
@kenkanfix
@kenkanfix 2 года назад
Hi, I think there 2 transfer case models I believe. So you would need to siphon out the fluid via the fill plug.
@zeomarmob
@zeomarmob 2 года назад
Drill a hole and tap to size. M8 or M10 is enough
Далее
BMW X3 xDrive F25 Front Differential Oil Change
3:20
Transfer Case Oil Change: BMW X3 F25 28ix
3:31
Просмотров 9 тыс.
BMW F25 замена МАСЛА В КОРОБКЕ 8HP
13:01