Тёмный

BMW X3 F25 HEADLIGHT AND FRONT BUMPER REMOVAL ! 

HOW TO DO
Подписаться 7 тыс.
Просмотров 12 тыс.
50% 1

Hello everyone and welcome to a new episode in howtodo. In today's episode I will show you how to remove the front bumper and headlights from the BMW X3 F25 from 2010 onwards.
Disclaimer:
Due to factors beyond the control of HOWTODO, I cannot guarantee against improper use or unauthorized modifications of this information. HOWTODO assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. HOWTODO recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of HOWTODO, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not HOWTODO

Авто/Мото

Опубликовано:

 

22 авг 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@stephanfradette8571
@stephanfradette8571 7 месяцев назад
Great video thank you
@HOWTODO0828
@HOWTODO0828 7 месяцев назад
Very welcome🙏
@FuJiNF
@FuJiNF 9 месяцев назад
Do you know if the Auto Leveling feature needs to be calibrated when the headlight is replaced? If not, would an initial static level just needs to be set? Thanks!
@HOWTODO0828
@HOWTODO0828 9 месяцев назад
It does not have to be calibrated, the headlight sistem will calibrate itself based on the calibrating sensors mountedon the subframe in front and rear.
@frankmacak1704
@frankmacak1704 3 месяца назад
Question - if you swap out all bulbs, ignitors, and control units [ I am not sure if it is part of the headlight unit] on the adaptive headlight with xenon lights, onto the new lens, do you have to reprogram the lights?
@HOWTODO0828
@HOWTODO0828 3 месяца назад
No you don't have to reprogram if you only install different bulbs or led. Only if you install a new model of headlight from a newer version of the car you have. For example if you have h7 headlights and you want to Install bixenon headlights you need to do a lot of modifications from wiring to leveling sensors installed on front and rear suspension arms and headlights washer sistem on front bumper. And after that you need to program the headlights.
@JoshKell7163
@JoshKell7163 4 месяца назад
It's a must that you remove the front wheels first if you don't want to waste time with bloody knuckles and cuts on your arms.
@HOWTODO0828
@HOWTODO0828 4 месяца назад
Yes, it's true my friend, it's a lot easyer with the front wheels removed first 🙏
@Charliescollectibles
@Charliescollectibles 6 месяцев назад
Thank you for this. Do you have the part number for the clips
@HOWTODO0828
@HOWTODO0828 6 месяцев назад
I don't have the part number for the clips, but just search on the internet and you'll find them🙏
@rafumotocross
@rafumotocross 6 месяцев назад
type in google "c05 clips bmw"
@alexandraava3034
@alexandraava3034 4 месяца назад
Nici one
@HOWTODO0828
@HOWTODO0828 4 месяца назад
Glad it helped you 👍
Далее
BMW f25 Headlight module Replace and Remove Water
31:18
ШОКОЛАДКА МИСТЕРА БИСТА
00:44
Просмотров 644 тыс.
How to Replace Front Bumper 2004-2010 BMW X3
13:42
Просмотров 14 тыс.
BMW X3 f25 LCI Grill/Nieren wechseln
5:15
Просмотров 31 тыс.
HID(XENON) TO LED BULB CONVERSION ON BMW F25
4:54
Просмотров 124 тыс.
The Most Common BMW X3 Gen2 Problems (2010-2017)
5:49
Попрошайка на BMW😅 #shorts
0:42
Просмотров 4,6 млн
ГЕЛИК из ДЕРЕВА!🌳 #shorts
0:37
Просмотров 2,2 млн