BNC to ethernet connector I PV balun +terminated Ethernet cable for AHD CCTV Installation

Подписаться 34 тыс.

Просмотров 89 тыс.

50% 1

BNC to ethernet connector for AHD CCTV camera installation or the PV Balun is an advanced type of Balun that has provision for both Video and Power instead of the normal type of balun that has provision for only video.
BNC to ethernet connector or the PV Balun has an ethernet port through which an ethernet cable can be connected in order to use the ethernet cable to transmit the video and power.
Unlike the ordinary video balun that requires making the decision of which pair of the Cat 6 or cat 5 cable needs to transmit power or video, a BNC to ethernet cable takes the fully terminated ethernet cable with an RJ 45 Plug and distributes which pair goes to power and video.
The use of the BNC to ethernet connector for AHD CCTV camera installation, makes the installation very simple, effective and less pruned to faults that result from defective terminations because it does not require any BNC or power terminations The only terminations that are required are the RJ 45 / ethernet cable terminations.
How to terminate an RJ 45 Cable for CCTV Cameras, please refer to this link for a detailed video on how to do this. • DIY RJ45 Network cable...
The use of the traditional video balun is shown in this link below
• How to install CCTV Ca...
CCTV Camera installation using coaxial cable and power is shown in the link below.
• CCTV Camera Installati...

Наука

Опубликовано:

25 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@ibzz_rmn 3 месяца назад

Really good vid! Really helpful!

@Tech_Inside_Out 3 месяца назад

Glad it was helpful!

@ReutersKiprono 11 дней назад

Thank you for your explanation

@Tech_Inside_Out 10 дней назад

Thank you

@feleyunibanda7948 Год назад

Thank you for these videos

@Tech_Inside_Out Год назад

Glad you like them!

@valdecirjosemaria9615 24 дня назад

a onde eu compro isso

@WanAkmalMediaStudio Месяц назад

Very good explanation. I love it

@Tech_Inside_Out Месяц назад

Thanks very much

@RLTango Год назад

Thank you for the demo! Have you noticed a drop in video quality between products? Amazon has a lot of options and a big variance in price.

@Tech_Inside_Out Год назад

Thank you too. Yes, the video qualities are different from one manufacturer to the other even though they say the same specifications. Very difficult to explain.

@stephenmoroke1241 Год назад

Simply and less time consuming.What if you have multiple cameras,how you gonna power them up? Thanks🤛🏾🙏🏽

@Tech_Inside_Out Год назад

For multiple cameras, you can use the normal cctv power supply and fix the dc power Connectors at the ends, which will feed into every camera

@stephenmoroke1241 Год назад

@Tech Inside Out Oh yes.Thanks, new in security systems.The world need more people like you.

@HH_208 Месяц назад

Hi, I have a poe switch which powers 1 ip camera which is also connected to my dvr. I have a hikvision poc camera and was wondering could I connect one end of Ethernet cable straight to my Poe switch and then on the other end use the coax to Ethernet for the camera. Will this then make the camera an ip one?

@Tech_Inside_Out Месяц назад

No, POC cameras need to be connected through the BNC since power is fed into the Camera through the BNC. The use of the PV ballun does not make the camera an IP camera

@Miley_00 Год назад

Can I use this to connect the BNC camera to a Ethernet switch/poe to my PC? I subbed thanks for the help!

@Tech_Inside_Out Год назад

No, you can connect it to your pc without going through a DVR

@user-yf5vw1qs1m 5 месяцев назад

thank you very much but I have a question what could cause the no video problem and how can I fixe it

@Tech_Inside_Out 5 месяцев назад

No video could be caused by a number of things 1. Bad video cable termination 2. No power supply to the affected camera

@favouruboh5766 6 месяцев назад

Can it work for more than 5 cameras, since the adapter is used or can we cut the power clup and join to d adapter

@Tech_Inside_Out 6 месяцев назад

It can be used for more than five cameras. If you would have to install more cameras, you need a single large power supply unit

@yasmani421 29 дней назад

if the DVR have ethernet connectors, can you plug it directly without using the balun?

@Tech_Inside_Out 29 дней назад

A recorder with ethernet connections is an NVR. They take the ethernet connections directly

@This_Planet 2 месяца назад

good morning - thnx for this. think its a good way as sometimes you want to switch a camera to ip and then the ethernet cable will already be in place.. good. But one question could someone connect an IP camera at the camera end and skip the PV balum. and what is the maximum distance using this method.

@Tech_Inside_Out 2 месяца назад

The recorder used in this process is a DVR which is meant for Analogue or AHD cameras. You can use IP cameras at the ends of the cable. Maximum cable distance should not exceed 100 meters

@orangeduc3129 9 месяцев назад

With this setup how can I add Batery backup provider for the nvr to power during light out, using the 12v dc provider with battery please

@Tech_Inside_Out 9 месяцев назад

You can setup a battery bank with a hybrid inverter to power up the system. That will even last longer than the smaller battery type you find in power supply units. I will later cover that kind of standby power for cctv cameras

@orangeduc3129 9 месяцев назад

@@Tech_Inside_Out okay thanks for your info I really appreciate this since power off and on is a problem here. Thanks we will wait for your video on this

@orangeduc3129 9 месяцев назад

@@Tech_Inside_Out please thanks for your reply hope you do a video on this soon please thanks

@qstroud 9 месяцев назад

I need a device to do this a little differently. I have the “balloon” piece but my dvr has rj45 ports. How can I make this work?

@Tech_Inside_Out 9 месяцев назад

Since your device (NVR) has RJ-45 ports , you don't need a balloon. You have to connect the RJ-45 directly to the nvr

@gboomg5800 3 месяца назад

@@Tech_Inside_Out what if the NVR is not poe capable? will this be a problem?

@Tech_Inside_Out 3 месяца назад

@@gboomg5800 All NVRs with ethernet ports for connecting cameras are POE NVR.

@gboomg5800 3 месяца назад

@@Tech_Inside_Out Right... Thanks for the high quality and informative videos.

@gboomg5800 3 месяца назад

what of the IP address for the analog camera? guess I should just test it out

@hrithikmondal9328 5 месяцев назад

What if I use a NVR instead a DVR? Also can I connect a AHD camera to NVR?

@Tech_Inside_Out 5 месяцев назад

No, NVR is used in IP Camera installations. DVRs are used in Analogue or AHD installations

@charlouoperana3954 9 месяцев назад

Hello brother your video is informative... May i know if this set up works on all types of cctv camera even the cheapest one? I am a new installer of cctv. How many pixel should a cctv camera have for it to work? Thanks and more power

@Tech_Inside_Out 9 месяцев назад

It works for all resolutions. Thanks for the compliment. You can find more on my channel at www.youtube.com/@Tech_inside_out

@malajl 4 месяца назад

Est ce que possible d'installer directement avec Switch poe ? Juste le transmetteur avec le routeur , switch ou nvr ?

@Tech_Inside_Out 4 месяца назад

Non, il s'agit simplement de l'utilisation du Cat 6 pour transmettre de la vidéo analogique, vous ne pouvez donc pas utiliser de commutateur POE.

@kestermartinez Год назад

Is the image quality better than the normal coax wire?

@Tech_Inside_Out Год назад

They are the same when all setups are properly wired.

@emmawilson2799 7 месяцев назад

Do I have to buy 12V power supply for more cameras.

@Tech_Inside_Out 7 месяцев назад

You can use one large power supply unit that can cater for 9 , 16 or more cameras

@nickp546 7 месяцев назад

I have analog camera and ip cameras but i dont want to keep using 2 dvrs so can i use this to convert the analog to ip dvr and us one dvr like that will all cameras still work

@Tech_Inside_Out 7 месяцев назад

No, this cannot convert analogue cameras to IP cameras and vice versa. But you can get a recorder that takes both IP cameras and analogue cameras.

@nickp546 7 месяцев назад

You have any recommendations for them and i can see on phone live or playback

@Tech_Inside_Out 7 месяцев назад

@nickp546 Get a Jovision brand, it's proven and tested

@camporeynan1007 2 месяца назад

Hi...sir... in this set up how long ethernet cable canbe used? can i used 300 meters?

@Tech_Inside_Out 2 месяца назад

Maximum, 100m

@WesleyFerreiraVideos 3 месяца назад

Can I connect the blue cable to wifi router? If possible, would the energy reach the camera? 🤔

@Tech_Inside_Out 3 месяца назад

No, the router cannot power up the camera

@Kleshownica 2 месяца назад

@@Tech_Inside_Out but if I connect PoE injector to it?

@discoveryelectronics9966 Год назад

can i use ip camera convert into BNC DVR with using this converter

@Tech_Inside_Out Год назад

No, you can't convert IP cameras into BNC and plug into DVR

@wuchenfei2722 Год назад

@@Tech_Inside_Out How about if you use a pair of these, to connect an IP camera and an NVR using coax cable?

@orangeduc3129 9 месяцев назад

Please can I loop all the power cable together and give them one adapter if connecting 8 cameras please

@Tech_Inside_Out 9 месяцев назад

That may seem to work, but that will manifest in lines in the face of your cameras due to power deficiency to your cameras. So for very effective and clean pictures, it is good to avoid loops

@orangeduc3129 9 месяцев назад

@@Tech_Inside_Out Aww please please thanks soo much we’ve payed installers to fix one of the cameras having lines in the face of the camera after every night mode switching or power off reboot but no answer ,change the cat 6 cables still no answer. Ohh thanks please much . All the power were loop 🔁 together for one adapter. Please thanks best wishes for your kindness and good work.

@swaggst Год назад

We’d want to see a video of installation with 4ch passive video balun and how it works please

@Tech_Inside_Out Год назад

Well noted. Thanks very much for your continued patronage of my videos.

@swaggst Год назад

@@Tech_Inside_Out welcome it's been very helpful

@orangeduc3129 9 месяцев назад

Can I loop the cat 6 cable to connect 2nd camera on the way??

@Tech_Inside_Out 9 месяцев назад

Since the cables are terminated with the RJ 45, am just wondering how you could loop it? I will be glad if you can explain it further, may i don't understand the question.

@orangeduc3129 9 месяцев назад

@@Tech_Inside_Outplease I wanted to save cost of the cat 6 cables running from each camera back to the nvr,

@user-nb4ge9nz5y 9 месяцев назад

what about using a 200meters plus ethernet cable?

@Tech_Inside_Out 9 месяцев назад

It is not advisable to run cat 6 cables beyond 100 meters.

@aryadeckymagangga8664 11 месяцев назад

UTP cable used straight or cross ???

@Tech_Inside_Out 11 месяцев назад

The cables are straight through.

@mdasad6738 6 месяцев назад

What type head for cat 6cable RJ 45 or rj11

@Tech_Inside_Out 6 месяцев назад

RJ 45

@timothy1837 10 месяцев назад

May i know the maximum transmission distance of that set up using lan cable?..

@Tech_Inside_Out 10 месяцев назад

The recommended Maximum Cable length for network cables is 100m, but Cable quality nowadays are quite an issue, so you may have to do 60 or 70m for best results unless you are too sure of your Cable quality .

@Tech_Inside_Out 10 месяцев назад

@timothy1837 10 месяцев назад

i see... thanks so much for your reply...

@Tech_Inside_Out 10 месяцев назад

@@timothy1837 Most welcome