Great video. Thanks for it. I have one question. Is it possible to use a dado blade set with this saw? Does it have enough space for a set of dado blades? Thanks in advance.
Great video, I have a Dewalt DW745. has an equivalent price and the great advantage of the gear fence, it is not necessary to unlock the fence for further measurements. This is sensational and cuts are always accurate. The durability of the DW745 is also excellent, years of trouble-free use.
I'd love to have one, loving its rack and pinion gliding fence system. Sadly the DW745 was not available in Thailand. The GTS10J is however very sturdy, very portable yet offering a highly precise cut. Not regret buying this Bosch job site model despite a little bit play on its fence system.
좋은아이디어 감사합니다 솜씨가 정말 정말 좋으시네요.... 1500X600 사이즈로 만들어 보고 싶은데 다리가 흔들리거나 하진 않을까요? 예를 들어 사람이 올라간다던지... 휴대용 작업대 겸 우마사다리 대용으로 쓰고 싶습니다 칫수 링크 오류 나던데 재업 해주시면 감사하겠습니다
저도 보쉬 테이블쏘를 쓰고 있는데 톱날을 오늘 처음 교체 하려고 너트를 풀려고 하는데 안풀리네요 영상보니깐 회전반대방향으로 잠그시던데 너트를 풀때 톱날 회전방향으로 풀어야 되나요? 센타에 물어보니 회전반대 방향으로 돌려서 풀라고 해서요...알려주시면 감사하겠습니다~~영상 항상 잘보고 있습니다^^
The T-slot track opening is 16.42mm wide at the throat. The throat lugs are 3mm thick. The internal track width is 21.1mm so far too sloppy for any standard 3/4 inch track runner accessory even if you did mill the throat away so it was a trough rather than a T-slot. (Note the bottom of the T-slot is also profiled with ledges on the base of the T slot so depth at throat is 0.9mm greater than depth under lugs). The runner under the OEM angle gauge is a T shape with 20.0mm wide bottom section 6.94mm thick and top section 16.04mm wide and mm edges. One solution is a sled with hardwood runner. I use a waxed oak strip about 16.2mm wide and 7.0mm deep. No significant dimensional change evident in runner strip within the climatic variation evident in my garage in 5-30 deg C temperature range and relative humidity range 54-78% through summer into winter. An option I have yet to develop is using a 20mm wide metal strip 5mm thick running in the running in the T-slot with a metal "packer" strip say 15mm wide 3mm thick screwed on to the runner fill the gap caused by the 1.4 mm wide throat of the T-slot. Little tolerance for rough handling by accidental bending of Al strip so hardwood may be quickest solution.