No video :(

Brake Pads Can-Am Spyder

Подписаться 15 тыс.

Просмотров 13 тыс.

50% 1

In today's video you will find out how to install / change brake pads on Can Am SPYDER F3 F3s F3T F3 Limited and RT models This installation will show you step by step how to change front brake pads. This installation will show you step by step how to change front brake pads. This is how to video on changing CanAm SPYDER parts, with few tips and tricks, and step by step installation guide.
MartinTheVlogger Memorabilia sticker to support the RU-vid channel work
www.martinthev...
Can Am SPYDER and RYKER shop:
www.martinthev...
#spyder #CanAm #motovlog
In todays video you will find
0:01:14 - EBC brake pads and rotors information
0:02:30 - Step by Step brake pads how to change them
0:03:41 - How to remove holders of brake pads
0:05:35 - How to push back the pistons from brake callipers
0:09:09 - Professional brake solution
Official MartinTheVlogger page:
www.martinthev...
Video & photo copyright: ©MartinTheVlogger
Author: MartinTheVlogger (Martin Pohanka)
Camera used: 2x GoPro Hero 9 Black,
Music Credit: www.epidemicsound.com

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@MartinTheVlogger 2 года назад

MartinTheVlogger memorabilia 2022 click here -> www.martinthevlogger.com/product-page/martinthevlogger-memorabilia-2022

@ThomasNappo 5 месяцев назад

Good job Martin....no bull..😊

@MartinTheVlogger 5 месяцев назад

🤟🤟🤟😉😉😉😉

@vladjuchiac4348 2 года назад

Thanks for sharing this video after I already done the installation of mine😂😂😂

@MartinTheVlogger 2 года назад

😆😆😆😆😆😆😆😆😆

@Waldo1122 2 года назад

Lmao save $70-$90 my dealership charges $150 for this plus the pads if you don't bring any. Glad you made this video, I didn't know it was this easy! Also blacklist the bot's entire sentence below me, bots have become extremely rampant on RU-vid and RU-vid won't do anything about it.

@MartinTheVlogger 2 года назад

I try to report all SPAMs.. youtube is trying to bring new logic, but it takes time... as for the front, 150??? Seriously??? I am moving to your country and will do the change of front pads only 😆😆😆 rear are more tricky because of the belt but one day i will learn that too... for the moment i try to avoid it as much as possible 😆😆😆😆

@illmazing Год назад

Thank you. Looks pretty easy.

@MartinTheVlogger Год назад

Yup 😉😉😉🤟🚀💯

@illmazing Год назад

Just changed my front brakes. Thanks for the video. It was really too easy.

@MartinTheVlogger Год назад

@@illmazing 🤟🤟🤟🤟

@NickMasseyRideon 2 года назад

thank you for showing us, without the stupid music, very good video

@MartinTheVlogger 2 года назад

Music i try to change in every video... some may like it some may not 😉😉😉 but noted...

@VirusAlert0 6 месяцев назад

Can you make a video how to change the rear one for f3s newer than yours? As i.ve understand it.s a little bit diffrent that pre 2018. Thanks

@MartinTheVlogger 6 месяцев назад

Hi, not anytime soon acvording to video pipeline, but hope in winter 2024 we will do belt tensioner, rear yire change and also rotors. Martin

@troy9er 2 года назад

Nice video Martin, thanks for posting. My Spyder has only a little over 2200 miles on her. I’ll probably need to do this next year. The back will probably be done at the Dealer. 😉 Let us know whatever you find out about doing the back.😉 I might be inclined to do it myself if it’s not to complex. I don’t have all the tools yet. 🥴

@MartinTheVlogger 2 года назад

It think i may do it sooner or later by myself... but i am not comfy with it at the moment, so i need some time 🤪

@JimGDMAC 11 месяцев назад

At 2200 miles the pads are just about broken in. I replaced the pads on my 2020 RTL at 12000 miles then around 22000 miles. As I was getting the back tire replaced I had the back pads replaced at the same time as the front. I am assuming that they were replaced with Brembo pads as I had this done at the dealers. The breaks were hard worked at times having had a trip round the Alps including 5 Swiss passes in one day.

@arrie1953 11 месяцев назад

The pad you’re replacing has a greater surface area, they would work better.

@MartinTheVlogger 11 месяцев назад

🤟🤟🤟🤟

@josemariarequena7716 9 месяцев назад

Hi Martin. If I remove the brake caliper to change the disc. What torque should I give the screws when I replace them? And with or without Loctitte?

@kellymusarra8743 Год назад

Is there a torque setting to tighten things back up or just until snug? Got one side done, preparing to work on the other. Thanks for making it look soooo easy! After the front(s), moving on to the back.

@MartinTheVlogger Год назад

Snug is exactly how it is 😉😉😉 let me know how it was with the back 😉😉😉

@kellymusarra8743 Год назад

@@MartinTheVlogger Found the torque after I sent the message. Already forgot what it was, but I think it was something like 6 nm, so basically ‘snug’. I’ll have a bit of a delay to do the back. I purchased a set of PPA wheels that took 7 months to arrive. Been sitting in the garage for 2+ months, hoping for the front tires to wear out. No go, after 17k the tires are still in excellent shape. (Replace the back already) Hubby decided to have them mounted for me for xmas. He tried 10 places to mount, no one will touch them. Today, he finally found a shop that mounted, but couldn’t balance. I’ll be taking the bike in to the dealership for balancing tomorrow, then I’ll tackle the back brakes. We have a 5,000+ mile trip planned for this summer. I’m a bit concerned now if I have any tire issues while traveling.

@MartinTheVlogger Год назад

@@kellymusarra8743 i dont get it, why nobody would touch PPA wheels. Balancing is done in any tire shop and it needs very little balancing if you have new kenda kr20 tires. Fronts can go easy 25.000km 30.000km but rear last like 10-15.000km on F3. Always have tire repairing kit together with O2 "bombs" that can refil the tire with you. Enjoy the trip 🤟🤟👌👌👌

@kellymusarra8743 Год назад

@@MartinTheVlogger The issue wasn’t specific to PPA, it was motorcycle tires. The tire shops didn’t have the 2” adaptor (too small for their machines) as most have upgraded and old inserts no longer fit and motorcycle shops said it was a car tire, even tho it clearly says ‘motorcycle’ tire on them. (That also laughed, saying you should buy a real motorcycle). Frustrating to say the least!! Enjoy your day!

@lescrowther2857 Год назад

Hi there nice video. I have a Can Am spyder RT LTD 2011 will these rear break pads fit my bike?

@MartinTheVlogger Год назад

Hi, for 2008-2012 there are different pads needed... lamonster have few www.lamonstergarage.com/high-performance-ebc-semi-sintered-front-brake-pads-all-spyder-models-2008-2012-lamonster/

@hurleywilson7246 2 года назад

Greetings.

@MartinTheVlogger 2 года назад

Heloooo

@jaysimmonds1484 2 года назад

Hey Martin can you give us the part number for the new ebc brakes? Are they ceramic or semi sintered?

@MartinTheVlogger 2 года назад

Hi Jay, www.martinthevlogger.com/product-page/ebc-brake-pads-high-brake-effect or if you are from US lamonster has them as well

@jaysimmonds1484 2 года назад

Thanks Martin I'm in Canada may have to look around for something more cost effective, even the US with shipping and exchange is high$$. I have a F3S Daytona and have been following your build videos 👍

@MartinTheVlogger 2 года назад

@@jaysimmonds1484 please write me an email to martinthevlogger@gmail.com i will write you the part number. But i know that some of the pads for Europe have different code than for USA.. but now i am not sure if it is Ryker case or spyder case... anyway just drop me an email pls