Bricklaying - Dog Tooth Brickwork  

F knows mate...The lad who's job this is wanted every 6th course to be header stretcher header stretcher. Which makes me think it's Flemish stretcher bond. But when I dropped onto this job..I noticed none of the corners worked header closure stretcher. Some of the corners have 3/4 in..🤔..I made a video on this particular bond when I first dropped onto this job.. discussing the issues with the bond and how the previous Bricky & the customer were not bothered and told me to follow what's below...but have since removed that video. It's why I've not really done any filming on this job.. because I wasn't too happy with the bond below which I've had to follow. (At the start of the video I rambled on about this issue, but cut it out of the video..as I'm not about calling people. To be honest Mark I'm not too knowledgeable about different bonds so I'm not an expert on it really, but I'm sure there's an issue) Hope that answers the question mate! Maybe you know what the bond is🤣🤣🤔? Hope your well buddy, keen eye👌🍻

Variation of a double garden wall. Is best I can Target the custom bond.

It's "Flemish Garden Wall" bond. 3, 5 or 9 solid courses between. My favourite, yet full "Flemish looks better imo. English is too heavy imo

Modified flemish bond. If the half was in every course it be a standard flemish bond. Cheers brickys!

I'll Agree to disagree... "Modified" is a new one on me. The bond shown was a legit bond with a name already given to it... "Flemish Garden Wall Bond". The "Header, Stretcher" on a full "Flemish bond" repeats every course. "Garden wall" comes in when a full row of stretchers replace the "Header". This can mean a row of "stretchers", between the headers, every 3,5 or 9 courses.@@robertpagel8951 cher

Thank you very much ☺️☺️

Thanks Wayne, really appreciate it mate! 😄 Hows your week been mate :)?

Thanks mate🍻🍻👍

Haha brilliant mate glad you found that helpful buddy!..I've pulled my corners over loads of times before I come up with that trick mate😉 I'm currently editing another video on this pattern...but with a load more tips and tricks for this sort of work 👌👌😄

Thanks Andy mate!

Nice one Michael mate, appreciate it🍻 Been doing some more today👌 bit too cold really..compo was not going off😨😨

Thank you very much mate!

Thank you Stew mate, Merry Christmas to you and the family bud🎅🎉

Always catch myself on them and end up having something down🤦🤣

Ah thanks Rhys! Glad you enjoyed it mate👌👌😄 post on IG alot more..just because its easier 👌😊

Thanks mate👌👍

👍👍 cheers bud, hope your well mate

Thanks buddy! Hope your well

Thanks buddy 😊

Thanks alot buddy appreciate it mate.🍻 just putting together another video on this pattern with a few more tips in

Thanks Jay mate! Hope your well, love your new project bike 👌👌👍

Hahaha I can ramble for ages😂😂😂

Thanks alot Jack, took a bit longer than I expected..but not done it for a good year or so😂👌

👍👍 thanks buddy!

Cheers matey🍻🍻👍

Cheers mate appreciate it! Yea know what your saying buddy👌👌👍 Have a good day fella, thanks for your support 🙏🙂

Cheers mate appreciate it fella!👌👌👍👍

@@IzzytheBricky 🧱👍🏽

Thanks alot Robert appreciate it buddy 🤜🤛

Set a bevel for your flaunching finishes it ,get plenty of compo behind the perps prevents holes. But not bad work, when you get the chance to do this kind of work I like to be higher looking down on the brick ,just gives you a better prospective . Use a hop up . Keep enjoying your work .

Thanks Alan mate, good tips especially the bevel 👌👌 Hope you've had a good Christmas and New year buddy 👍

Charts mate mate! How how you fella🍻

Cheers fella👍👍🍻

Thanks Jim😄🍻

Thanks Justin really appreciate it! Been enjoying seeing your lads getting some good work done👌👌👌 I know mate, very exciting 😄😄🍻🍻🥳

Yea they doing well mate .Good luck isaac mate 👍

Thanks buddy🍻🍻🍻

Thanks so much mate I really appreciate your support!! Haha pay for the ✈️ and I'll see you there 😂

Thanks so much mate I appreciate it, New video out later on tomorrow! Hope your well

Thanks Andy mate, spot on tip mate👌 She'll be fuming when she seems me using her make-up brushes in my videos🤣😉

@@IzzytheBricky be funny wgen ur misses watchs the video and sees her makeup brush in it lol

@@IzzytheBricky Just a thought tell her you are plugging them and possibly get freebies from the make up brush company it might work & You might get some after all LOL.

Haha thanks Mark! Yea i need it sometimes 😉🤣🤣 not done this detail in ages.. especially with that 45m (ish) overhang 😨👍 did some more today...was loads quicker..less fingers and thumbs as me old boss use to say😉

@@IzzytheBricky 😂😂😂Yere it's same with me mate takes a day to get back into it. But definitely stops you getting board doing some different stuff 👍👍👍😉

Thank you very much friend 😊

Cheers Chris mate! I was taught by a decent Bricklayer 🙂👌

🤣🤣🤣🤣🤣

Thanks mate🍻👍 have a good one bud

Thanks John 👌🍻

Ayup mate, no you are totally right, and I've since been shown a different way of doing this toothing to allow for much greater contact 👌 it's slightly more wasteful regarding brick wastage. But overall will be a better job👌 Cheers mate hope your well

Thanks Top cat! Back is loads better now thank you 👌 hope your doing well!

@@IzzytheBricky Good mate. Seen good mortar stands on Ty the Australian brickies u tube. Gona make some. Looksoke a small metal clothes airer. ,folds down good for light travel too..

Sounds good that does mate! Let me know how you get on with them👌🍻

Ayup mate no beam fill..and yea joiners got a bit of work to do before felt and lat 👌 actually got some special insulated felt going on which is about 25mm thick..never seen it before 😯 something to do with bats in the area 🤣🤣

Mint tip mate👌👌👌🍻 have a good weekend fella

Sounds like a good job that does mate 👌👌 thanks David mate, appreciate it 🍻

Sorry all your comments keep getting removed for some reason . IzzyTheBricky@hotmail.com or message me on Instagram mate

Still cutting the tooth brick too short. He can't seem to work it aaaaat! Bloody you tubers.😂

😂😂😂😂 ah mate I always look forward to see what your comment is..only reason I make videos now😂😂😂😂😂😉

Great tip mate!

Well I'm on DW so really don't matter. However when I've done this in the past, it was 5 or 10 quid a meter each course of pattern. So since this was 4 course of pattern it would work about 20/40 quid a meter+what ever we charge for the bricks too

@@IzzytheBricky thanks a bunch Im in the U.S. just struck off on my own a few months ago trying to get everything sorted out really like your videos

@@jamesbranim6886 ah thank you very much buddy! Good luck mate, all the best for 2022💪🍻

You just put it in after it's gone off 🙂

Thanks so much mate I appreciate it, New video out later on tomorrow! Hope your well

Good shout, hopefully not too much 😂 Down to the customer really 👍

Haha just because I'm too lazy to go buy some work trousers 🤣😉

Thanks mate appreciate it! To be fair..you can see the difference..if you know what your looking for..especially if one lift has been done 🐸 down and then changes to frog up. That's why I've continued doing frog down on this particular job. It's why I've not filmed anything..I've been on this job for a couple of days...you know how people get here if you 🐸 down .treat you like a criminal 😂 Hope your well Benny mate

@@IzzytheBricky yeah you’d be shot 😂😂 yeah al good matey. When you going to do your own thing anyways. We all know your better than £180 a day 👍🏻👍🏻🐒🐒💰💰

Hiya buddy! Yes day work on this sort of work! Can't be rushed

@@IzzytheBricky agree excellent work at very good standards

Thanks mate really appreciate it and I'll try my best 😊

Hahaha 🤣🤣 Cheers Joe mate 😊 🐸🐸🐸🐸

I'll be on this job for a while..I'll make sure to post a picture or video of it soon buddy

Ayup mate I can't remember off the top of me head..I'll check for you on Monday mate 👌👌 just remind me buddy👍

Ibstock Ivanhoe Westminster Brick 65mm Red Multi

Ayup Bin! Crazy isn't it! We got 2k on this video ☺️ currently working on my new video for Sunday ☺️!

That's it mate👌👌🤣🤣 don't wanna be rushing this stuff on price 😉

Ayup mate, read though all your comments, genuinely appreciate your feedback and critiques. One of the reasons I started making videos is to try and better myself with feedback from others☺️ Hope your well 🙏

@@IzzytheBricky you have the ability to be beyond very good. There are few on RU-vid that can. The most critical person I am after is myself even after 50+ years.

@@IzzytheBricky back of dog tooth should be plastered up with mortar to fill all voids created by cutting brick to make it like a solid course.

@@PaddleDogC5 thank you, I have Much much more dog Tooth to do, I'll be doing that from now on🙏

YES Charles!😁👍

Mind went totally blank🤣😄

Alright mate 💪 Happy New year's buddy! I'll definitely be doing it that way if I do it again mate, thanks for the Information ☺️ all the best

What is it fella? Should be full bat?

@@IzzytheBricky No.

@@nickglenister3832 ?

@@IzzytheBricky come on , you'll kick yourself. we've all done it.

@@nickglenister3832 haha sorry mate no clue

Haha no no this phones face cam is broke😂

Yea it's a garage mate

Do you mean bricklaying or his work?