Broken Skidsteer Axle Tube. 

That decal on the side of your helmet says it all: "I'm here because you broke something."

Man! I’m always impressed! That one experienced welder at work! With the resourcefulness of an engineer. And i like the sticker “I’m here because you broke something” 😂😂😂

Your half blind on your back looking into the abyss welds are better than my standing at a table comfy welds

It's a simple repair, they said. Should take no time at all. they said. It will be fun they said. Great job as usual Isaac. Thanks for sharing.

Arkansas creeper,nice.Going to throw that into my vocabulary.

I never realized they were chain drive. I learned something today.

When I hear 'skidsteer' a little groan seeps out and I can't control it. That was impressive. I've been in some bad situations but you made that look easy. I could never do these videos because of all the foul language I would have used. I don't think I have been more impressed by any other welder.

Pretty common issue on abused skid loaders. Also those chains you can remove a link to tighten them up as they do stretch out over time. Very nice that they removed the engine first and cleaned it up they must like you 😂

You're great at welding with a pretzel !

Thank you Isaac . That poor machine sure took a hit. That is some magic welding. If I-took that machine apart It would never run again😂😂😂.

Guys like you make me feel there are some good dudes out there

The best rod bending I have ever seen . New trick for me . Great job teacher !!

Isaac each of your videos is a visual and oral instruction of how to reason about problems and find solutions. I’ve become a tribal elder to the tribe of welders and dudes like me who love learning how to fix things. Thank you for teaching us.

You know its one of those 'Good' jobs when your rod looks like a pretzel! Woo Hoo!

I think I would have fainted at the prospect of having to dissasemble and reassemble a machine like that! My hat is off to you guys!

Liked the "Arkansas Creeper" comment. You have more moves than "Houdini"! Great video.

Yunno the coolest part about watching you is your confidence in what you know you can do. This bobcat was really broke bad once before, the weld on the axle proves it, and it wasn't fixed right then. You saw that and new what had to be done to make it right. Most "welders" wouldn't have touched this job for fear of just making it worse, you saw the fix and did it.

When I worked in maintenance, I had to weld in some awkward positions.. So bad I had to use a mirror to see where I was welding.. Hats Off Issac for that tough repair.

If it was anyone else arc gouging, I would be like "where is the damn fiberglass heat blanket!". But, Isaac is a damn surgeon at cutting metal!!!

Patience like I've never seen. Whatever was charged for the repair wasn't enough and Isaac still earned every penny. I would be a constant muttering of swear words attempting this.

Well done, your perseverance never ceases to amaze me…job done

There you go my man , You have worked another welding miracle .

Always a excellent job by you. I love how you explain the pros and cons in doing a repair. Much Respect to you 👍

I can say with 100% certainty that temco hydraulics is a stand up company with fantastic customer service!! I had boughten a 50 ton hollow cylinder from them about three months before my shop burned down. I emailed them real quick to see how much a seal kit is for it. Before I could even order one they had sent out a complete rebuild kit for it for free!! It was in the far end of my shop that was the last thing to catch fire. So it just got hot enough to burn some of the paint off and wreck the seals. Getting that kit was one of the little things that meant O-so much to me at a really hard time in my life!! Thanks temco!!

This job is just a pain in the a$$ but yet the welds look like factory made. You´re doin´a great Job Isaac. Greet´s from Germany.

I can really appreciate this one I’ve found myself in very similar spots and sometimes all you can do is bend rod after rod and weld a half inch at a time! Honest work clean money and a sore body keep up the good work

17👍's up IC WELD thank you for sharing this video with us all 😊

You buddy deserves a lot of credit for cleaning that machine up before you got there. I know how many inches of oil soaked dirt was in that belly and caked on every surface.

That required serious work even before you could start welding. All those chains with no rust, amazing.

All good fun, one thing I like a lot about your video's is that they basically run in real time, you edit out the boring bits but once you start a job you get it done, more often than not, in one hit. Some makers could go a year between cuts and we would never know... You don't do anything like that which adds a lot more meaning to your content. Thankyou for sharing and doing things in the way you do.

Wow, that axle took some pretty serious impact at some time. Great repair !!!!!!

I'm impressed with the accuracy of the blind welding it's all very much ball park area when watching the flash and then you pan out and hey presto spot on . Considering the amount of access available that was an amazing job . I'm sure most of us guys that are hobbyist would turn and walk away instead of even considering tackling that . Well done and thanks for sharing this one as it shows it's not all wide open workshops or huge free space around the job site

Extremely Impressive! Fantastic use of the come alongs, chains and jacks to bring things back in position! Isaac, you can add “contortionist” to your resume with all of that out of position welding. Bending those rods to get yourself in those tight spots and still have good penetration and a good looking bead👍. You made this repair look a lot easier than it actually was… you saved the customer 💰by keeping this machine productive, not having to purchase new equipment for quite awhile! PROPER Repair! ⭐️⭐️⭐️⭐️⭐️⚡️⭐️⭐️⭐️⭐️⭐️

High praises! You earned every nickel you made on that job.

Feeling sorry for the spanner guy with this one. That's a lot of work he's having to do - takes a special type of person to know how it all goes back together!

I can't imagine the total mess I would have made of that job, Great work as usual!

"Arkansas Creeper". learned something new today. Always wondered what it was called. Great call. Thanks. Really like the fact that you won't do it if it can't be done right.

That was a good little job. A lot of work taking it all apart now putting it all back together. Good stuff. 👍👍🙂🇨🇦

Man, that took skills, not to mention patients, that I can only wish I had. A lot of people would have turned that job down.

Great repair.

Guess I should start buying boxes of those angled rods too.

Reminds me of an Irish fella years ago he bent the electrodes into just about every shape to make it work. Learned a lot from him.

Hey Isaac, that was a heck of a job. After 35 yrs in construction I can assure you the skid steer is the most abused machine out there. I think the tele- handler is a close second! I have some of those 1109 rods too !😊 I learn something every time! Thanks for taking the time to show us real world repairs.

I wonder does the dude who first tried to fix that look up this video and look how it's supposed to be done.. Nice work sir!

I really enjoy watching you work on the big earth engaging machines.

I am sure you agree that most shops would have gotten it close and called it good. Good tutorial for people learning how to do it right! Pretty cool how you identified all the stress points and repaired them.

Great job Isaac and company!

I truly enjoy watching you do your magic .

“Arkansas Creeper”. At first I thought you were referring to my Uncle Filbert.

Sweet vedio really enjoy u welding u makes it look easy

Great job on the cleanup and disassembly, before you were brought in to weld. Wish the YT mechanics get the message, least worries of fire, and they can see ALL the damage, with least possible contamination of the mechanical works.👍👍 That's how I was first taught back in the 70's. The attitude, that has come across lately, is rush, rush, then the job ends up being crap, not always, but more than I'd like to see. Again.👍👍 Best wishes from Northern Canada.

*I C Weld* Bravo well done, thank-you sir for taking the time to bring us along. GOD Bless.

Me too, I'm impressed with this video Isaac. Great subject and 'impossible' welding position conquered. I sure enjoy watching these complicated situations.

a master class in why arc welding can be the best or only option

Isaac your are the man..... if someone asked me to try and fix that......i would have told them........ well, looks like we are shipping it to Texas 😂. Thanks for the great content as always.

Like all good paint jobs, the prep is the key...you just paint with molton steel, ... Looks great. Always fun to watch you work. Thanks so much for taking the time and trouble to show us how you do it.

That last weld....w'all behind the camera could see good n we was telling at yer ter hand us the torch!

Yep, that was no walk in the park, but as per usual you did you top drawer work! I've never seen welding braille before LOL that's a cool trick! I guess with the price of used equipment now and availability more guys are fixing old machines to keep them going than before. It's good that men like you and your mechanic buddy have the skills to do this. Cheers from Tokyo! Stu

Man! Talk about welding out of position!! Well done as always Sir.

That was a tough one....Good job !!!

Thank you for your effort that you put into your videos that you share with us about your day. I do not stick weld often and your examples get stored in my head, for that next time! Thank you for allowing us to look over your shoulder and learn. Blessings.

That was a nice class on how one can manipulate the rods to get the business end of stick into the right spot. Not to mention how to get all the pieces to fit like original. Great video!

Amazing welds look factory, kudos to you both! Thanks for sharing!

Damn that was definitely some acrobatics welding, nice 👍

Your tight corner welds look way better than mine made in plain sight and easy access... 😉👍👍👍

My shop teacher of 1960es would have described that as a "Rudy Goldberg lashup" , but he would have been proud, I think. Would like an update in the future, on that rig. 👍🇺🇲

Definitely in the big job category. Welding that makes you feel pain.

Hey just wanted to say I love and use your videos, I’m breaking into welding as a side hustle, and will see where it goes in the future…just landed my first major job offer to fix a box blade, a tractor bucket and some tines…thank you for sharing your craft and talent!!

First. You have great videos Issac. Keep up the good work sir.

AWSOME as usual. Great work and welding

Crazy bottle jack trick on the wheel!🍾

Took a lot of custom shaped rods to do that job. Hats off to you and your co-worker. Amazed you can keep your sense of humor when you have these kind of obstacles to deal with.

gotta love those tight spots , nice work

Very good video.

Sweet repair with challenging angles. Isaac can maintain an arc even with flex in his rod. I bet it will crack somewhere else before it cracks where Isaac welded.

I knew I wouldn't be disappointed by the slightly sketchy setup in the thumbnail. Some jobs are tricky.

Amazing work, Isaac, as usual. Hats off to your buddy for all the wrenching he had to do to tear that thing down and put it all back together!

You gotta love that Bobcat build quality 😂

First time I’ve ever heard some one call for an Arkansas creeper!

Hello from San Antonio, TEXAS!

All that stick welding …. Whet a time thief! 035 dual shield for the win !

Amazing job!! Never saw any one weld with rods at multiple angles. Just plain outstanding.

Arkansas creeper... That one made me laugh all the way from here in Arkansas. I'll be borrowing that one! 😂

I'm late to the party, but as always "Another work of excellence out the door "

Thats a patience tester. Could imagine all the colourful words and thoughts lol good job Issac, hopefully you never get to see it again.

Professor Isaac holds fabrication class.

Welding while blind lol nice work as always!

Tight quarters! Good work getting it handled!

Never seen bent welding rods to work around corners. It works. Cool!

37:53 broken bracket just below the flashlight beam; also broken where it meets the outside of the frame. Certainly the BEST WELDING (of many previous repairs) this machine has ever had! How you get smooth welds with the contortions and bent rods is beyond belief!

as always doing the imposible with something that needs a new owner or scrapping , great repair

Talk about welding out of position! You are a welding Jedi Master!

That looks like that machine might have been a "Sunbelt" rental at one time. They have kind of faded around here. That reminded me of some "chain-work" I did on a Woods 7500 backhoe for my B2710 Kubota a few years ago. Some folk talk about "out of position" welding but I'll bet they haven't seen Sir Isaac's "out of position welding"!!!!!!! LOL

Arkansas creeper, caught that right away. Good to see that your knees are healthy. Take care.

Good job - thanks for sharing

I knew it takes a variety of skills to be an expert welder. I did not know being a contortionist was one of those skills. A very interesting video indeed.

Having never tore into a Bobcat skid steer I'm surprised at how lightly they're built. Even for a 175 it seems underbuilt. Surprising that they hold up to rental abuse.

This was a much more involved welding job than I thought at the first view. And that after the mechanic disassembled 80% of the skid steer. What a nightmare.

A broken rear axle on a skid steer happens, because the operator fell foward dropping the load slamming back down on the rear wheels. Very common. 👉👉👉👉We found just removing the whole top half and motor off the chassis makes it easier to realine the wheels better.

that brings a new meaning to welding out of position