Broken Xbox One Controller Trigger Temporary Fix and Repair

Подписаться 2,7 тыс.

Просмотров 44 тыс.

50% 1

Here's a temporary fix and a full repair to an Xbox One S controller with a broken trigger button. I filmed this several months ago but just got around to editing. Sorry about the delay and I hope you find it helpful!
Amazon Affiliate Links:
(Note: Clicking the links and shopping on amazon may help to support the channel. Amazon could potentially provide me with a small commission for directing traffic to their site. This would be of no additional cost to you.)
Replacement for Xbox One S Controller RT LT Btacket Trigger Key Button Inner Support (Bracket) amzn.to/3gJToSy
SN-RIGGOR Replacement Housing Full Shell Set Full Buttons Set Faceplates ABXY Buttons RB LB Bumpers for Xbox One S Slim Controller (3.5 mm Headphone Jack) S Controller Repair Parts (Black) amzn.to/2XRHBdy
Full Housing Shell Cover Buttons Custom Mod Kit Replacement for Xbox One S
rover.ebay.com/rover/1/711-532...
Like, comment, and subscribe!
You can also find me @
/ selectstartsave
/ selectstartsave
/ selectstartsave
#xboxone #broken #trigger

Игры

Опубликовано:

10 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@gremlen 3 года назад

Thanks for watching! Dont forget to put the bar to the trigger completely back in place after you screw the trigger cover back on. I had to use the plyers to get it completely back in place and forgot to film that part. Hope you find this video helpful. Let me know if you have any additional question.

@quyennong2568 Год назад

Awesome video, I followed your exact instructions and it worked for me! Glued it the broken plastic part helped for 2 weeks before the new part came in. So that is working also as a temp fix. Just great for all the clear instructions!

@lucacozza4843 2 года назад

Thanks to you i now have a fixed controller, it will most likely meet my wall again so I can’t wait to rewatch this brilliant video!!!

@NostalgicGamingOldies 2 года назад

Thank you. That was super easy. I’m installing an led mod and those triggers I was stuck on. Thanks again

@Tazastical 3 года назад

super helpful and easy to follow friend :)

@gremlen 3 года назад

Tazastical glad it was helpful. Thanks for watching and commenting 🙌

@mashelemash4979 Год назад

Thanks alot bro.... I finally managed to fix mine after seeing this

@ForceHammerGaming 3 года назад

Cool video! Thanks for the tip. I dropped you a like! 👍

@gremlen 3 года назад

Force Hammer Gaming thanks for watching and commenting 🙌

@swifttitan8126 2 года назад

I came here and at first was really disappointed with the repair I diy'ed the repair because I had the parts and then actually was happy to see that I could clean the parts with windex so I thank you for that tip. Repair was trash though

@jacksonmcgarvey6571 3 года назад

A magnet popped out of my right trigger and I can’t put it back in because part of the underneath of the trigger broke off and so the magnet isn’t held in place when I play. (And yes this is because I threw it at a wall)

@gremlen 3 года назад

Dang sorry to hear. I put a link to the replacement part in the description. Hope it helps get your controller working right. Thanks for watching and commenting!

@OnurKaya3144 3 года назад

thank you so much it really helped a lot.

@gremlen 3 года назад

You’re welcome, glad it helped! Have a great day!

@jonnywhitestar5046 3 года назад

Thanks man, just saved me a whole heap of uncertainty

@gremlen 3 года назад

You’re welcome, thanks for watching and commenting 😊

@jonnywhitestar5046 3 года назад

@@gremlen I'm subbed and liked, seriously was having a melt down. Got two broken controllers, ordered a new Xbox pad (lime tennis ball one) to find out the venom rechargeables don't fit, then to find out the (A) button sticks. Had to send it back, broken controllers was kids arguing and throwing them across room, one has one drift and trigger magnet case (snapped) so this morning I had a little time to myself and thought I'd merge the controllers, but I thought the rumble packs in the triggers was connected so you'd have to wire it all back up after so wasn't going to bother. Couldn't find a decent video and then came across yours. I now have my favourite Xbox pad back in fully working order. And it looks mint. So thanks again man. P.s kids are grounded and their not going on my Xbox till they learn to respect money. So I'm gonna mope around all day pretending my pads fucked. That'll teach em on father's day (uk)

@gremlen 3 года назад

@@jonnywhitestar5046 awesome! Glad you’re back up and running. Happy Father’s Day!

@mikapew 3 года назад

Cool video! 👍🏼

@gremlen 3 года назад

Let’s go, Mikachu! Thanks for stopping by! I appreciate you watching and commenting 🙌

@vogames7496 3 года назад

Good video yo!

@gremlen 3 года назад

VoGames thanks for watching and commenting! I appreciate the support 🙌

@Vanger7 3 года назад

Great video

@gremlen 3 года назад

Hubix thank you for watching and commenting 🙌

@XtremeGames 3 года назад

Cara seu canal é muito bom! Se você souber trabalhar bem a divulgação e com os algoritimos de procura do RU-vid, você vai longe! (Escrevi em PT pra você usar um tradutor!)

@gremlen 3 года назад

Thank you for the support!

@samb2334 3 года назад

Thanks! Got one controller with a broken d pad that doesn’t click and one with broken trigger, the dpad looks complicated to fix So ima combine 2 broken controllers into 1 working one.

@gremlen 3 года назад

Good idea! The ultimate Frankenstein controller in the making. Thanks for watching and commenting 🙏

@crumby731 3 года назад

That’s what I just did 🤣

@MikeM10293 2 года назад

That’s kinda what I did, every time someone I know breaks their xb1 controller I always ask to have it for parts. I’ve rebuilt about 3 controllers now and it makes it so much easier now that I learned how to solder wires back on

@shirleybatson7343 3 года назад

Thank you

@gremlen 3 года назад

Thanks for watching!

@hollywoodundead91393 3 года назад

Hey do you know anything about the magnet popping out? I cant find it anymore and I think my thing is broken cause if it. Any tips?

@gremlen 3 года назад

Yeah the magnet is needed for it to function. If it fell out, you should be able to pop it back in or maybe even use some glue to hold it back in place. Im not sure where to find a replacement for it besides harvesting from another broken controller. You might be able to find the magnet on ebay or aliexpress. Thanks for watching and commenting.

@PrimeTimeMike 3 года назад

is there a way to do this without disassembling the whole controller bc i don’t know how to do that

@gremlen 3 года назад

You can try holding the trigger down and look in any gaps to see what’s going on. However, it would more than likely require taking some of it apart to see what’s going on and fix the trigger. Sorry you’re having issues. Thanks for watching and commenting 👍

@kyroshi_pr116 3 года назад

Thanks you for help me

@gremlen 3 года назад

Glad to help. Thanks for watching!

@XZAVIER-DAA-GOD 2 года назад

My problem is that the little black thing under is broken off so if you press down it doesn't reach

@lucasvernava-carles1575 3 года назад

My g thanks

@gremlen 3 года назад

Thanks for watching and commenting 🙏

@MrPoopyButhole Год назад

If you're trying to take the hex heads out and you don't have the proper tool just get a 5/64th and either a hole punch or a screwdriver with a sharp point on the tip... Stick it inside of the head and break the center piece out wiggling it back and forth it will snap after that you can use the 5/64th hex to fit it.. good luck

@fredjohnson7018 3 года назад

How do you dissemble it so quickly I can’t understand how to take off the sides

@gremlen 3 года назад

sometimes the sides can be stubborn to remove. Maybe try a thin pry tool. Be patient with it as you dont want to crack the plastic. Sorry you are having trouble. Thanks for watching and commenting!

@vxrzxy 3 года назад

By any chance is there a way to fix the thing when ok s ok basically I was playing gta and my rt button like snapped

@gremlen 3 года назад

You might need to investigate further by taking it apart. Sometimes its just the magnet pops out and you can put it back in place. Other times it might be broken like the trigger in this video. Thanks for watching and commenting!

@patrikkajari527 3 года назад

So the left trigger of my controller doesn't work, I didn't take it fully apart but I saw that the magnet was missing, I found it, put it back in, and it still doesn't work, what do you think is wront with it?

@gremlen 3 года назад

Sorry to hear about the controller issues. You can try to flip the magnet over and put it back in...but it’s likely the sensor if everything else seems okay. Replacing the sensor would require soldering. Another thing to check is if there’s any firmware updates for the controller. Hope that helps. Let me know if you have more questions. Thanks for watching and commenting 🙌

@patrikkajari527 3 года назад

@@gremlen Thanks for the advice, I actually flipped the magnet and now it works, I just need to find a way to fix it in place, because now it attached itself to the cover of the trigger, and the sensor only reacts to it when it's fully pushed in

@gremlen 3 года назад

@@patrikkajari527 awesome! Glad it was that. Maybe try a little super glue or electrical tape. Hope you’re up and running soon.

@jakob9826 3 года назад

Can u glue like the cover of the trigger that has rt on it

@gremlen 3 года назад

It might work as a temporary solution until you are able to get a replacement. Thanks for watching and commenting!

@th3graduate292 3 года назад

ooh man i can feel that pain.

@gremlen 3 года назад

i'爪【AKJ】 haha thank you for watching and commenting 🙌

@giovannigiorgio2262 Год назад

@gamingwithsid9531 3 года назад

Bro can u tell how to fix my controller I droped it and the rt dosent work anymore

@gremlen 3 года назад

Sorry you’re having trouble with the controller. You will likely have to take it apart to investigate further. Sometimes the magnet falls out of the trigger and it could be reinstalled. Or the trigger plastic could have cracked like the one in this video.

@OKayD3N 2 года назад

My rumble started acting up in my right trigger so I detached it and snipped the rumble out of it and now my trigger won’t re attach :(

@gremlen 2 года назад

Oh no sorry to hear that it won’t reattach. It took me a bunch of tries to get the trigger back in place.

@quandolius3091 3 года назад

What other tools can I use to get the shoulder part off

@gremlen 3 года назад

Are you referring to the bar holding that spring in place?

@quandolius3091 3 года назад

@@gremlen yes but I could not find a pair of pliers

@gremlen 3 года назад

@@quandolius3091 do you have tweezers or tongs? I’m not sure they will work but could be an alternative to use instead of pliers. Thanks for watching and commenting 👍

@robinashaheenofficial 3 года назад

I loved your video new friend here from USA lets be friends

@gremlen 3 года назад

Robina's Cuisine glad you enjoyed it. Thanks for watching and commenting 🙌

@robinashaheenofficial 3 года назад

Thanks stay connected join you

@Kenf_ 3 года назад

any chance you could show a video of how the spring is actually supposed to be

@gremlen 3 года назад

Sorry that’s not clear in the video. If your controller is disassembled, maybe try to use the other trigger for reference? Thanks for watching and commenting 🙌

@Para_romeo 3 года назад

"Human malware situation" ...clever.

@gremlen 3 года назад

Thanks for watching and commenting 🙌

@dannyaakjr6359 3 года назад

Thx the part that breaks on me every time

@gremlen 3 года назад

Thanks for watching and commenting 🙌

@dannyaakjr6359 3 года назад

@@gremlen ur welcome. Did u use the same spring and pin or buy New?

@gremlen 3 года назад

@@dannyaakjr6359 I used the same spring and pin

@dannyaakjr6359 3 года назад

@@gremlen ok thx. I tried buying from alienexpress Hope they fit

@gremlen 3 года назад

@@dannyaakjr6359 great, hope it arrives soon! Let me know how it works out.

@galestar2 3 года назад

I’ve been scouring the internet to find the replacement parts for this repair but for an elite series 2 controller, if anyone knows where to find the replacement parts for that model controller please let me know !

@gremlen 3 года назад

Sorry you’re having trouble. Worst case scenario, you can buy a broken elite 2 to harvest for parts. I’m not sure the one I linked in the description will work for elite 2. Any luck with searching eBay or AliExpress?

@galestar2 3 года назад

@@gremlen I was hoping to not have to get a whole second controller just for the one bracket, and as far as eBay, Ali express and Amazon go all I was able to find was Xbox one and Xbox one S, which are the same ones you linked and the model before it, I also compared the bracket between both model controllers and I don’t think either would be compatible to the one I’d need

@gremlen 3 года назад

@@galestar2 try this seller. They are parting out a controller on eBay. www.ebay.com/itm/NEW-Microsoft-Xbox-One-Elite-Series-2-1797-LT-RT-Trigger-Frame-Springs-3369-/265131572256?_trksid=p2349624.m46890.l49286&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338485574&customid=&toolid=10001&mkevt=1

@galestar2 3 года назад

@@gremlen thank you so much you’re my hero haha!

@gremlen 3 года назад

@@galestar2 you’re welcome, hope that controller is up and running again soon. Thanks for watching and commenting 👍

@Zanarkand_0 3 года назад

Yeah I decided to throw the whole thing in the bin. Fucking done with that spring.

@gremlen 3 года назад

I’m sorry about the spring. It took me like 20 tries to finally get it back on. Thank you for watching and commenting 👍

@Zanarkand_0 3 года назад

@@gremlen Thanks but it's okay. I'm glad you managed to fix yours. I just don't have the patience.

@brotherhrgamer 3 года назад

Top like

@gremlen 3 года назад

brotherHRgamer thank you for watching and commenting 🙌

@owenlaslett1937 3 года назад

anyone know the screw?

@gremlen 3 года назад

you might be able to harvest the screws from another broken controller or use ebay/aliexpress. I just reused the ones on this controller. Thanks for watching!

@user-mm3uf9kx7x 4 месяца назад

❤

@IrishMarauder14 2 года назад

My trigger completely popped off

@privateprivate2268 3 года назад

👍

@gremlen 3 года назад

thanks for watching and commenting!

@privateprivate2268 3 года назад

@@gremlen Your welcome

@jadenbyrd3607 2 года назад

I'm gonna cry my LT won't close

@aza_ace 3 года назад

mine had 3 random springs-

@gremlen 3 года назад

hmm. Is your controller an original or one of the second iteration of xbox one controllers? Maybe try looking at the other trigger to see how it fits back together. Thanks for watching and commenting!

@howiseeit5326 3 года назад

Microsoft are annoying asf making these controllers a nightmare to repair without the specific Microsoft screwdriver kit.

@gremlen 3 года назад

yeah it helps to have a electronics screw driver kit on hand to tackle these projects. Hope you were able to fix your controller. Thanks for watching and commenting!

@krisares6396 Год назад

Good fix but that isn't my problem, mine is the damned thing feels like it has no spring in it on the right button. Damn thing just won't move

@maddiecaptain7975 Год назад

Mines doing that same thing the top button won’t press down and the trigger feels like it just fell into the controller basically (not fully)

@krisares6396 Год назад

@@maddiecaptain7975 I bought a replacement for the whole top section on Amazon for $8, it comes in a pack of 2 with a separator and 2 screwdrivers to take everything apart.

@maddiecaptain7975 Год назад

@@krisares6396 is there triggers included. My trigger broke I guess

@krisares6396 Год назад

@@maddiecaptain7975 not in that pack. But I am sure they aren't too expensive. I am gonna get the product info and link it for you.

@maddiecaptain7975 Год назад

@@krisares6396 thanks so much

@th3graduate292 3 года назад

bye

@gremlen 3 года назад

i'爪【AKJ】 thanks for hanging out. Hope you enjoy the new computer 👍

@MrPoopyButhole Год назад

I just threw my controller because I'm getting divorced. Im not a crybaby that throws things but 16 years of my life is going to change. Anyways it's the same exact spot that broke and I'm going to have to glue it. But if anyone has the problem finding a tool to take the screws out use a hole punch with a sharp needle 💉 like tip to break the inside of the hex bolt out... You'll know what I mean when you see it... You can wiggle it back and forth and break it out if you get something in there metal just try not to mess up the sides for the hex.... After that just put your regular hex in there it should be a 5/64 good luck

@EyesAndThighs 3 года назад

How the fuck do you take it apart

@gremlen 3 года назад

Maybe this will help www.ifixit.com/Guide/Xbox+One+Wireless+Controller+Model+1708+Trigger+Caps+Replacement/131721 Thanks for watching and commenting 👍