Build Smart: The Many Ways to Install Your Muzzle Device 

Do you watch JP (Japan Porn)?

Because of the OD of the muzzle brake changes due to its shape, if you cut away on the brake, the OD of the brake and the OD of the barrel would not match

Thinking about handjobs.

The JP double crush washer!

Thanks for your quick reply!

I'd suggest buying a damn good set of plugs and muffs cause this thing is gonna peel paint off a barricade 10 feet away. On a 6.5 creed, why?

Ah.. Never had a barrel that looked that nice

Red loctite doesn’t

Shouldn't have to, no.

No.

You don’t need any loctite or rockset. A little high temp grease aids in removal and prevents galling especially with stainless barrels.

None.

Your penis.

We don't lube our treads, we use a little bit of blue loctite to ensure the comp doesn't rotate

You should lube it .. no need for locktite that I e ever seen imo

rockset is honestly ideal.

We haven't had any issues with this in our 25+ years of being opened. We do understand what you are talking about, but this has worked great for us so far

VC-3

Not sure. Not enough information on the types of malfunctions. The muzzle device really should have little to no effect on the function of the rifle.

@@JPRifles it’s fine 100% with the factory Daniel defense brake/flash hider but seems to me it’s dumpin so much gas out the ports it sometimes don’t pick up a round…the brake has a huge affect on it as far as recoil being reduced from feel and I filmed me shootin and played it back and it’s pretty obvious how much less she kicks….awesome product and rifle just may need 1 little tweak somewhere in the system to 100% cycle with all ammo and I know you guys are well versed in BCG”s…buffers…springs..and all..my first hiccups outta just 2 ar’s I own…look forward to another reply to hear your thoughts…matt

For the JP one, it doesn't matter. For a standard crush washer, the conical end should point towards the receiver.

When looking at the barrel, you should see “this side towards enemy” on the muzzle when installed properly. You are welcome.

Because you can add tape to the inside of the jaws so that it doesn't scratch the comp or nut and adjust it so it still fits. If you put electrical tape in the jaws of a 3/4" wrench it will no longer fit on a 3/4'' fitting.

I wouldn’t use one for anything i gave a shit about. If you have a quality 3/4” wrench, you shouldn’t be worried about marring or scratching anything. If your kit came from Harbor Freight or NAPA maybe the tape would work; id just invest in a quality wrench set. Safer anyway

It isn't a crescent wrench , its an adjustable wrench with the most common made by the crescent company, just like vice grips are locking pliers made by the vice company, and a Skil saw is a circular saw made by Skil

Bill Hodges or calling all multi tools “feintools”

@@ToddKing best answer

In this video, our tech used our JP Universal Vise Clamps to secure the upper receiver and barrel, so the gas port was facing away from the tech. If you have purchased a JP 3-port, then the JP logo will be on the bottom of the comp.

How many times are you guys going to say you used your vice clamps😂

@@michaeldolan5094 i lost count at 274 🤣😂

That's not how we operate. If something left our shop looking like that, then something went wrong. If you want to email us at service@jprifles.com, we'll see about making it right.

Upon further inspection, it has been determined that what you describe are accurizing burrs. Have great day