Build with Roman - How to build a Fremont DIY Outdoor Fireplace Kit

Подписаться 15 тыс.

Просмотров 743 тыс.

50% 1

In this video, Roman takes you through the simple process of building your very own Freemont outdoor fireplace kit. You will get to see one be built and learn valuable tips and tricks along the way. Don't forget to bring your Big Ass Square. You are going to need it. Sorry, the Big Ass Square is not included with the kit. If you cannot perform the tasks in this video, or you aren't confident in what you are doing, you can always call a professional. They would love to hear from you.
*Note: This is the older model. Visit romanstone.com for the new and improved version. Don't worry, It's easier to build than this one.*
#BuildWithRoman
Big Ass Suare Tutorial:
• Build with Roman - Big...
www.romanstone.com
Our DIY kits can be purchased here:
romanstone.com/buy/shop-diy-kits/
Create A Backyard Paradise With Romanstone Outdoor Living Kits:
romanstone.com/shop/
Get Inspired:
/ buildwithroman
Additional Orion Block Resources:
romanstone.com/products/wall-...
"Wagon Wheel"
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Хобби

Опубликовано:

10 фев 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@TheMule360 2 года назад

Finally, a RU-vidr who did not waste half the video on B.S. Great job!

@peterpepelehew6283 3 года назад

Bought the Fremont kit - just noticed there are two types of brick layout. The one here is using almost all rectangular stones, while there is also one with angular/trapezoidal stones. Would have loved the option of which stone we would like. Can’t wait to start my build this week

@cassiebright3619 3 месяца назад

Finally found this video again from 4 years ago...thank you...

@dogh2o921 2 года назад

Not only is this a cool build, the music is smashing.

@jwg30 5 лет назад

Explained really well! Thank You.

@Romanstonehardscape 5 лет назад

You are welcome.

@bottytoohotty 3 года назад

you nailed this one Budgie

@rukus100821 4 года назад

very nice roman loved the video.

@cheezmartian 2 года назад

Looks great - lucky owner!

@triciamoller8580 4 года назад

He cracks me up! I need this fireplace! After Covid. 😩

@Romanstonehardscape 4 года назад

We are shipping these kits out daily.

@vivian9319 3 года назад

@@Romanstonehardscape how much are these kits?

@elizabethfarrell9650 5 лет назад

I enjoyed watching it. 😃

@JorgeRodriguez-wp7bu 4 года назад

Excellent...…!!!!!

@sharenfederinko5721 7 лет назад

what kind of sealant/adhesive are you using, and does it have to be able to withstand high heat? Do the fire bricks require a different adhesive than the stones?

@lucky1u 2 года назад

Great instruction video.

@jenc8953 3 года назад

Amazing!

@adkcustomsllc Год назад

Yeah buddy! Very smart channel and approach. Inspiring.

@TheKahu78 3 года назад

Dude I'm getting one of these to put with my pavilion I'm building next year!

@shanehart1123 5 лет назад

This is probably the most funny instructional video I’ve watched in a long time thank you sir for making me laugh you made my day and please where can I buy one those big ass squares

@davidcloyd1296 7 месяцев назад

Very cool!

@matthewstone4097 2 года назад

the most entertaining fireplace video i've watched so far, thank you.

@eolden7749 3 года назад

Is that subfloor adhesive you are using? I spent my younger years building fireplaces a many. This is really ingenious and well thought out. Great job.

@bobdobalina7319 3 года назад

Its a shame the UK doesnt supply these (not that I have found on line) The USA are sooo good at this stuff, they know how to live!

@typicalyoutubename9494 5 лет назад

Omg this is awesome 😂 #bigassaquare 🙌🙌 love the video

@HoldemRw 6 лет назад

love the look of this. I am no stone expert but after shopping around for kits I noticed these kits cost bit more than others from places like Menards, tech block etc... what is reason for that is it quality of the block used

@-o-The-Duke-o- 2 года назад

What does something like this price out at?

@SwinginJohnson74 4 года назад

Ballpeen seems to work better for chipping edges of the brick.

@tomusa1 Год назад

well done

@danc3831 4 года назад

Nice job.....a little advice that goes a long way from a 50 yr experienced mason. Sponge off the block and the married block where the adhesive will make contact. You can brush those blocks off with a brush till the cows come home but nothing will make adhesive bond like moist contact with a cured masonry material. Bond two pieces cleaning only with a brush and another set with the block that was sponged moist. Let them cure 48 hrs. Now try to separate them any way you can or want (hammer and chisel etc.) The moistened blocks will fight you every inch of the way to separate them. Still a nice job you did there.

@Annadrs 4 года назад

Just wanted to ask you a question since you said your were a mason... can you build this on top of existing stone patio or do we need to remove patio and pour a concrete slab?

@danc3831 4 года назад

@@Annadrs No I would not Build anything structural upon a patio That is not knowing The confirmation beforehand Most Patio In this geographical region are 4" thick Designed for light loads and Foot Travel. I would contact my local code inforcementIn your areaFor the proper constructionDetails of your project

@PainterD54 8 месяцев назад

@@Annadrs I don't see why you can't just build in right on the patio block, unless you have some serious frost heaves during the freeze/thaw cycles. That thing will weigh atleast a ton or more by the time you're done. It isn't going to go anywhere unless you are concerned about it settling over time.

@activelifestylestore2830 5 лет назад

g mor2" square firepit on my patio. Walls are 24" tall and made from solid limestone with a concrete cap. I would like to convert that into a fireplace. Is there a way to use one of these DIY kits and build on top of the existing four walls of the firepit or am I going to have to tear it down and start from ground up?

@sumatai1 3 года назад

Is there anyplace in Ontario Canada that has this same idea?? Nice product!

@christianbeck8153 3 года назад

I know you posted this over 5 years ago, but did you use refractory mortar with your firebrick or just the construction adhesive? Thanks!

@greygoose4x46 4 года назад

How much heat does it give off? Are fire pits better for keeping warm?

@2001Sunshine 4 года назад

Need a video on how to do 2 stacked fireplaces, like one on ground level and the other above on a floor with a deck. For a walkout basement.

@KBradAdams Год назад

We have some of these or similar in our neighborhood and I am curious where does the smoke go? The ones I see have not holes at the top?

@ossianmartins8016 4 года назад

i have question after u doin angle iron?

@brandongarrott7869 8 лет назад

What's is the size of the angle iron? I know it's 46inchea long but is it 2x2??/ will it work with quarter inch 2x2?

@RomanStoneHardscapes 8 лет назад

Check the instructions for the size of the iron. I believe it is 34 inches for this kit. I do not recommend a 2x2x.25 inch iron. 3x4x.25 or bigger should do nicely. You do not want the iron to bend at all. a 3x5 or 3x6 would be even better if not overkill.

@budlyle1016 3 года назад

Nice job What was the cost

@mydarlingdaisy 3 года назад

Suggestions for adding gas logs for outdoor fireplace? For those allergic to burning wood, how would a gas insert be used for outside?

@andrewpreedy8207 3 года назад

can i get these kits shipped to the uk?

@zawhtikehtike2069 3 года назад

why its different brick, how its work? Thank you for your channel.

@ToXicCooKi 4 года назад

How long did this take to make?

@NashvillePastaman 4 года назад

can i purchase one with a 42" firebox ????? please please pretty please !!!!!

@bobcurrie71 4 года назад

Can you buy this in Canada?

@jsafla666 3 года назад

From the sound of it, its only rocks that he can place into submission LOL!!!

@russellallen5482 3 года назад

As a mason for more than 20 years I think I would use mortar to build anything masonry and especially an outdoor fireplace! We spend a lot of time following local guidelines and codes to assure that fireplaces are built correctly, I’d first check your local codes because this thing here could not pass a code at all ! No rebar no concrete no refractory mortar and I’d like to see this thing function , I believe it would only be for looks and not produce much heat at all due to the back wall on the firebox goes straight up and not angled forward. I bet this thing only last about 4 years or so and a real masonry fireplace will last you 50 years. Cool idea bad concept

@mobley402 3 года назад

Do you have any video recommends based off your thoughts good sir?

@goodllookin1722 3 года назад

As a mason also, I think it will fall apart in time, glue doesn’t hold that good

@russellallen5482 3 года назад

@@goodllookin1722 100%

@VoxBox2000 Год назад

You are one of my favorite singers!

@jacklynsmithross 3 года назад

Where did you get the kit?

@Forum4life07 7 лет назад

cool name bro

@christopherknaff1815 4 года назад

Can you add another row of blocks under to lift the whole fireplace higher?

@PainterD54 8 месяцев назад

Yes, you can make the base as tall as you want before starting the firebox.

@tcoaviator 8 лет назад

Fire brick is not required on the floor of the firplace, only the walls?

@Romanstonehardscape 7 лет назад

Firebrick isn't even required in an indoor fireplace by code - just a certain thickness of masonry. Firebrick is just not very susceptible to chemical attack. It also is very dense, so it radiates the heat for hours after the fire is out. Also, it creates an inner replaceable lining of masonry in a firebox. These reasons are why fire brick are commonly used.

@LampWaters 2 года назад

How far from fence and property line is suggested?

@landonfister9444 3 года назад

Whwre can i get these stones and blueprint

@yvettela6179 5 лет назад

Can I install on a concrete pad? Does the company offer installation services?

@Jimmy-gt4wt 4 года назад

Did you ever get a reply much simpler to pay someone

@todddoidge8276 4 года назад

What's the aprox. Cost of this kit

@GWDadventures 10 месяцев назад

Did you pour a pad under as a foundation?

@alexborghello5029 4 года назад

Is the Lintel block required or can I cut a notch in a paver

@Romanstonehardscape 4 года назад

The lintel block are from the same blocks used to make the fireplace. You can find the instructions at Romanstone.com. You can always visit our library of instructions for more info. It can be found here: drive.google.com/open?id=0B-qeA8fO3hdpfnlrNUdYZUpaNFd6dlh5bC1GWlNuTTV4ekp6Mk5YRXlDMjVvZDNsdVVlSFU

@Lite_Lotus 4 года назад

How much did that cost?

@blessedarmadillo8257 Год назад

Maybe I missed it but did I understand that this is built without a sub ground foundation? Not sure that would work in the Northern parts of the country.

@jeff_9074 3 года назад

Hard to see but is that concrete for the base or did you use paver base and leveling sand?

@PainterD54 8 месяцев назад

I would only build it on a concrete slab. The ground could settle in time and it would look like the leaning tower of Pisa!!

@jessicanasen3231 4 года назад

Is there instructions on installing the bricks onto Angle Iron?

@mykasiurka 3 года назад

Thanks for the video content! Forgive me for chiming in, I would love your opinion. Have you heard the talk about - Panilliaan Immaterial Prevalence (do a search on google)? It is a good one off guide for protecting your family from danger minus the normal expense. Ive heard some super things about it and my old buddy Taylor got cool success with it.

@carmesin76 3 года назад

How much it cost for that fireplace kit

@samfloreslaw Год назад

Where do we buy the kit?

@captainmerl1 5 лет назад

So with the big cap on top how does the smoke vent out? I didn't see that part in the video?

@Romanstonehardscape 5 лет назад

Like a standard chimney cap, there are openings all around beneath it allowing smoke to escape. It is just the top cap that sits on supports that hold it 8" above the chimney opening. You can always download the instructions from the website to see how that works.

@jodyb91581 3 года назад

So…… where or how does a fella get his hands on this here kit?

@williesmith7055 Год назад

Where do I get the kit?

@blackllistd5752 3 года назад

how many bricks was all that?

@unfitfortravel8053 3 года назад

wow! that's a big ass square! I don't think Lowe's sells those.

@topnotchgrillin4882 3 года назад

How much is this set???

@Pofomoco 5 лет назад

Can I use a locally supplied PL 500 VOC Landscape Block Adhesive for extra glue if I run short or is there a different glue you recommend?

@Romanstonehardscape 5 лет назад

Any professional grade landscape block adhesive rated for fire pits and fireplaces should be fine.

@thegoodguy3160 3 года назад

How much are these kits!

@bobbybass7518 3 года назад

I can't access the website.

@kathleenjones9588 6 лет назад

The cap stone in video looks like it’s flush over the top, not allowing smoke to escape. I notice in other pictures on your site the cap stone looks like its elevated. Video is a bit misleading. I think that’s what one person was asking about - why the capstone. Maybe you could explain how that’s put up on elevated stones - and how those stones are secured. Thanks.

@Romanstonehardscape 6 лет назад

The capstone supports are together on one side to force smoke out the other three sides. For detailed instructions - you can always read the actual instructions: drive.google.com/open?id=0B-qeA8fO3hdpaVpkRmRwNFAxNTg

@anmi1985 4 года назад

can you put this fireplace right on top of existing stone patio?

@matejovich 4 года назад

I would also like to know.

@eolden7749 3 года назад

There is a lot of weight there. Personally I would build a strong footing not just a four inch slab.

@PainterD54 8 месяцев назад

@@eolden7749 I park my truck loaded on a 4" slab of concrete for days (40 ton) so why the hell would you want a footing? Waste of time.

@paganpoetprophet6441 2 года назад

How much total

@juanmcsweeney4503 2 года назад

I dont see this fireplace lasting in California where the ground moves?

@bobbyborges6054 4 года назад

How big is the pad when you start

@caritamccoy3823 7 лет назад

please did you use the adhesive to install fire bricks

@Romanstonehardscape 7 лет назад

Yes. You use adhesive to install the firebrick.

@caritamccoy3823 7 лет назад

thank you so much I'm over here building one and I was confused do motar go inside the cracks

@caritamccoy3823 7 лет назад

not trying to be a pest but also do.the fire brick ho all the way to the top

@marlinweekley51 6 лет назад

I can't think of any real good reason to glue the firebrick - may want to replace them some day. They're not going anywhere

@Romanstonehardscape 5 лет назад

You will want them glued to keep from falling if s fire log grills into them. When it comes time to replace them, the floor won't be an issue. That is as long as you don't floor then to the structure, only to themselves .

@6mallards 3 года назад

Is there any reason why I can't build higher than the 48 inch extension

@PainterD54 8 месяцев назад

No, you can go as tall as you need.

@6mallards 8 месяцев назад

@@PainterD54 I actuully built one in 2020 love it

@cynthiabennett7540 7 лет назад

How many pieces of stone are in the kit?

@Romanstonehardscape 7 лет назад

Check out the free plans to see what all is included in the kit. drive.google.com/open?id=0B-qeA8fO3hdpaVpkRmRwNFAxNTg

@joeyv821 4 года назад

@@Romanstonehardscape Kudos for sharing the full plans like that.

@AhJodie 8 лет назад

Please explain the cap on the top

@Romanstonehardscape 8 лет назад

If you are referring to it being placed upside down, that is simple. The natural rock texture of the cap is on all sides but one. That is usually considered the BOTTOM of the cap. BUT since it will be placed above one's eye level, one has to look UP to see it. instead of seeing the BOTTOM of the cap while looking UP, flip the cap over. Therefore, one will see the TOP when looking UP. The BOTTOM is now on TOP where only the birds will see it. If this is not the explanation you seek, please be more specific in your question. I hope this helps.

@Dinonuggets90 3 года назад

But doesnt have a liner on the chimney

@robertthomas401 2 года назад

are you going to update this video as the fremont II is no longer built in this way

@johnknott6645 4 года назад

Great video. 2 Questions.... 1. What type of glue are you using? 2. What is the best foundation? 10" compacted minus or 8" concrete pad?

@AndyObusek 4 года назад

I have the same question about what the best foundation is

@Romanstonehardscape 4 года назад

Both are sufficient. Concrete is easier as long as you reinforce it properly. Be sure to put it in a gravel base, too. If you do decide to or a pad, finish it level. You will not want a grade for water runoff as you normally would. If adding to a larger pad, be sure to surround it with expansion joints, effectively keeping it on its own pad. If using gravel, be sure it's it properly compacted. Use as little course same as possible. Keep it under 1/2 inch thick. No matter which you choose, be sure to have drainage away from your fireplace and it's foundation. You don't want water undermining your foundation or Saturday the sounds around it

@johnknott6645 4 года назад

@@Romanstonehardscape With concrete...would you advise footings below the frost line?

@Romanstonehardscape 4 года назад

@@johnknott6645 I would follow best practices in your area. You can always pour piers below the frost line in the corners. Usually these structures are built in floating footer with the gravel acting as a thermal break. Below the frost line is usually overkill. But over building is rarely a bad thing.

@skylinemusik1 3 года назад

How much is this kit???????

@itsduende7751 2 года назад

Why not to use concrete instead of glue ?? But it look good to me well done man thank you for the video

@PainterD54 8 месяцев назад

Glue is plenty good to hold those together. Those block weigh 20 lbs. Where are they going to go. There isn't a wind that will move them. If you use a high heat construction adhesive and clean the block off good, you won't be able to pull them apart. There are outdoor fireplaces built using NO glue or mortar at all, just dry stacked and they stay just fine all year long. Do a search here on RU-vid for "dry fit outdoor fireplace" and you'll see.

@tonyjohnson7373 2 года назад

How much

@Pre-op8ut 4 месяца назад

Do you have a pizza oven one???

@AndyObusek 4 года назад

I really like what you offer with your kit but I'm kind of concerned that gluing a giant tower to bricks will be susceptible to falling over. A lot of the other DIY plans I see build a frame from wood, cinder block and backer board, and then use mortar to attach a veneer of decorative stone. Please help to alleviate my fear! Which will be more structurally sound?

@Romanstonehardscape 4 года назад

I hope no fireplace kit has a wooden frame! Veneer is exactly that, a veneer. It has no structural properties. It actually adds to the structural load. There is a limit on their weight in seismic zones. As far as cinder block construction, this is similar, except the blocks are solid. The great thing about my kit is that the structure and the finish are achieved in the same material. Glue is actually way stronger than mortar, especially in flexural strength. It also resists water much better. You could Asher a veneer if you wanted, but that is the difficult expensive part that requires the most maintenance over time. The fireplace uses base massive practices. The flue is only necessary for trim pieces. The adhesive is just a amazing yet cheap insurance policy. But, don't take my word for it. Read our reviews and look what your neighbors have built: romanstone.com/buy/shop-diy-kits/customer-gallery/

@AndyObusek 4 года назад

@@Romanstonehardscape great thanks! Look for me to put in an order in the spring

@rcastillo122 4 года назад

@@Romanstonehardscape I've search your website for this answer, but what about wind? I live by the gulf coast and we can have gusts up to 30-40+ mph. Would the glue and structure of this build be able to withstand that type of daily weather?

@Romanstonehardscape 4 года назад

@@rcastillo122 Good question. A masonry column had very small surface area compared to its weight. Wind loads at this height of column are off little concern, especially at the low speeds you are referencing. While not trivial or ignored, wind loads are more prevalent in fences and structures where their is no easy path for the wind to go around. In such systems, columns are used for reinforcement. In many ways, a fireplace is a tuned pipe column. It even has a large base for more stability. As for glue over mortar, glue had far more adhesive properties than mortar. But, there is a limit on the height you can safely build the chimney. This is due to the inability for internal steel reinforcement. As long as you build in the parameters, your fireplace will be safe. I'll have to look up the wind loads it is rated for and post them on the website. I'll put it on the list for this winter.

@davemarriott9332 7 лет назад

your website says "Page Not Found" when I clicked on it. Just thought I'd pass that along.

@Romanstonehardscape 7 лет назад

Maybe it was undergoing maintenance...

@rc8422 2 года назад

How much ?

@henryreyes479 9 дней назад

These guys still around?

@MrBrickboy38 3 года назад

How much does the fireplace kit cost?

@apeschell 2 года назад

Tree fitty.

@RogerSnell 3 года назад

What about the foundation??

@jrobles1019 Год назад

The real mvp

@ronniehopkins5723 4 года назад

how much does this kit cost?

@Romanstonehardscape 4 года назад

You can choose from a few different kits and configure them in many different ways. Prices start at under $2500 delivered. Check them out at romanstone.com

@paulreynolds9003 7 месяцев назад

I can understand a pizza oven combo out side ,but it’s hard enough trying to heat my living room up never mind the outside of my house.

@pc01 3 года назад

When I was an apprentice if I used a hammer like that the tradesman would cut the handle off!!

@jesseniadechert124 Год назад

Where can you buy the big ass square?

@kringles65 7 лет назад

Cost?

@Romanstonehardscape 7 лет назад

Visit this page to shop all of our DIY kits: romanstone.com/buy/shop-diy-kits/

@daniellanzotti2391 4 года назад

$3k since he is afraid to tell u or lazy one of the two

@hilarioromero6028 5 лет назад

Que puerqueria de travajo

@Fufiout 3 года назад

no mud?? pls explain. glue is good for 100 yrs

@MrFunkdaddyfresh 4 года назад

Do the big ass squares some with the kit?

@raywarriner7750 7 лет назад

Can we get these on the East coast?

@Romanstonehardscape 7 лет назад

We now offer shipping of our kits. Visit romanstone.com or buildwith.romanstone.com

@georgeEPC 7 лет назад

Ray Just call Unilock Or Techo Block, That's all this is. They are easy to build. Basically your ordering Brussels dimensional units if you go with Unilock. The trim cap...I'm not a fan of using pavers that go on the ground for that. Could have used bull nose or coping

@RiverValleyLandscaping 5 лет назад

georgeEPC unilock block is kiln dried also so better chance of not turning to mush after a few years out in the weather, I was thinking of slate stair treads cut to fit for the trim since I work for a unilock and Portland stone retailer