Building the ULTIMATE 500cc Two Stroke Engine 💀 RIP CR500 / KX500 - 2023 Gas Gas MC500 dirt bike

Подписаться 26 тыс.

Просмотров 9 тыс.

50% 1

Building the ULTIMATE 500cc Two Stroke Engine 💀 RIP CR500 / KX500 - 2023 Gas Gas MC500 dirt bike
🕘CHAPTERS🕘
0:00
🔥 Enter to win our 2023 Gas Gas MC500 OR $10K cash - it's up to you: www.mxrevival.com/enter-to-wi...
🔥 MX SKILL SHACK: www.mxskillshack.com/
🔥 ZINC PLATING KIT: www.mxrevival.com/product-pag...
🔥 CHECK OUT YOUR MC500 BUILD UP CLOSE, PERSONAL & BEHIND THE SCENES HERE:
-mXrevival Instagram - / mxrevival
-mXrevival TikTok - www.tiktok.com/@mxrevival?lan...
-mXrevival Facebook - / mxrevivalonline
-Complete MC500 playlist - • Dream It // Build It /...
🔥 CHECK OUT mXrevival's AMAZING BUILD TEAM:
*Today's Build Team mentions*
-Elite Moto Factory jeskemxcustoms.com/
-Stuck Nutz stuck-nutz.com/
-HYGGE Performance www.hyggeperformance.com/
-OMC Raceway omcracing.com/
-Fast Blast & Coat fastblastandcoat.com/
-NoToil notoil.com/
-Dubya USA www.dubyausa.com/
-Carl's Cycle Sales www.carlscycle.com/
-Onium Pro oniumpro.com/
-Pryme MX www.prymemx.com/
-Zero Resistance Throttle www.zrthrottle.com/
-Phoenix Handlebars phoenixhandlebars.com/
-Bolt motorcycle Hardware boltmx.com/
-3DP Moto 3dpmoto.com/
-DeCal Works www.decalmx.com/
-MX Plastics www.decalmx.com/
-AHM Factory Services ahmfactoryservices.com/password
-Dirt Tricks dirttricks.com/?v=7516fd43adaa
-HYGGE Performance www.hyggeperformance.com/
-BRC Racing brcracing.ca/
-Rekluse Motorsports rekluse.com/
-Fastway Pro Moto Billet fastway.zone/
-Phathead Racing phatheadracing.com/
-Lectron Fuel Systems www.lectronfuelsystems.com/
-Motool motool.co/
#mXrevival #GasGas #MC500

Спорт

Опубликовано:

30 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 138

@mxrevival Год назад

Bring this badass, big bore, electric start beast home... or $10K cash - and of course, every RU-vid episode's MX parts giveaways! Make it happen here: www.mxrevival.com/enter-to-win-our-500cc-gas-gas-build-1

@chihuahuaverde425 Год назад

Yay Uncle Tony is back!

@mxrevival Год назад

The one and only💪

@mikehudg2209 Год назад

Very interesting bearing installation !! I like the burner method I have not seen that 😎 , I have always used a light bulb on the case and freeze the bearing too !! I love watching your builds and learn something every time , this is the real deal folks, things don't go perfect each time 👌 best moto channel on the tube !!!! PAY ATTENTION 😁👀🏁

@mxrevival Год назад

Thank you, Mike! Congrats on your win too! I will email you this week for sure with your free checkout code! Stoked to see you over at MX Skill Shack too! www.mxskillshack.com

@mikehudg2209 Год назад

@@mxrevival thank you uncle Tony for you sharing your knowledge-looks like I'm getting a 23 ktm sx 250 , will do until I get hell fire 🔥 😁 so no toil stuff will go to good use 👍 thank you 👍

@EliteMotoFactory Год назад

@@mikehudg2209you’re welcome Mike! Thank you for the words and for hanging out with us. We appreciate you!

@rickybobby8417 Год назад

Tony's regimen(s) is borderline OCD but is a true sign of an experienced professional. The knowledge between you guy's is amazing, listening to two cut up and have fun I could watch all day 😂. I see a cable tv show in the future.

@mxrevival Год назад

You are so right about Tony! Helps teach all of us to slow down a little bit and make sure we capture all the fine details. Super stoked on your feedback about us as a team, when we read things like that, we just get more excited about the future.

@EliteMotoFactory Год назад

I don’t know what to do with my STUCK NUTZ - Ricky Bobby, possibly… Appreciate you hanging out with us and hopefully learning something new.

@EliteMotoFactory Год назад

@@mxrevivalthat guy is cool Chuck! Give the man some stuck nutz

@irod2821 Год назад

Mx skill shack👏👏👏 can’t wait, its gonna be a great partnership, congrats guys👍

@mxrevival Год назад

Thanks playa! Stoked to see you at The Skill Shack!!

@Sweendawg32 Год назад

I’m so pumped to see you and uncle Tony , aka ( uncle stuck nuts) collaborating!! 🚀 I’m glad to be part of this new beginning. The content and videos to come , is exactly what we need. Like I said before , watching Tony work (and smelling things ) should motivate someone to wanna do better on there next build. Super professional. #M.X.S.S.

@mxrevival Год назад

We are SO pumped to dig in & get to work, Mikey! WE WANT TO THANK YOU VERY MUCH FOR BEING OUR FIRST EVER MEMBER AT MX SKIL SHACK!!!!!!!! 😍😍😍😍😍 www.mxskillshack.com welcomes you

@Stomper67 Год назад

Maybe we should call “Uncle Tony”…… “Uncle Sniffy”! 😂

@EliteMotoFactory Год назад

See Mike! I told you you ruled! Number 1 baby. Sometimes ya just gotta smell it, see what’s cooking.

@EliteMotoFactory Год назад

@@Stomper67like the little Puerto Rican dwarf

@ktmkeith13 Год назад

STUCK NUTS 🥜 ! 🤟🏻 Love this build I can’t wait !

@mxrevival Год назад

Hell yes my dude!

@Dirt_Bike_Dave Год назад

"I used to spit on it"...Charles..." I still spit on it " You guys made me laugh so hard I nearly choked on my Frosty Beverage.🤣🤣 if you know you know 😉

@mxrevival Год назад

"Motion is lotion", baby!! Haha - could probably use whatever you were drinking in a pinch too! 😂

@andrewwilson9130 Год назад

that exhuast is absolutely spectacular! I love how yall used those pliers to install the bearings, I will definitely be using that technique in the future!

@mxrevival Год назад

So clean, right!? Glad you found value in that. Much much more to come over at MX Skill Shack! The HYGGE pipes are just ridiculous 😍

@Stomper67 Год назад

Love that blood-red frame, screw those “sparkle fan-bois” in the last video! 😂 I just subscribed to the “Skill Shack”,, your one of the FEW subscriptions I would pay for!

@mxrevival Год назад

Hahahahaha glitterdicks. WE ARE SO HONORED TO HAVE YOUR SUPPORT!!

@EliteMotoFactory Год назад

Sparkles are good for bass boats and SOME Chevy Impalas…. Wait a Dodge Ram minute! Thank you for the support 🙏🏽

@ArdenBallard Год назад

Congratulations on the business venture gentlemen!!

@mxrevival Год назад

Thank you AB! We’ll see you at The Shack! www.mxskillshack.com

@desmondpiihl8776 Год назад

Dude gotta say I'm pumped on the mxskillshack idea. My Dad was a Kawasaki dealer and later worked for Kawasaki. Im glad I always listened to him on now to build bikes and mechanics overall. He still to this day passes on his knowledge at 83, but has always said there is more to learn. This is perfect to learn and evolve for anyone. Share the knowledge is why we aRe here! Dad never tells Dick jokes so this fills that gap as well. 🤣 keep on slaying guys!

@mxrevival Год назад

I always enjoyed hearing the stories about your dad and the Kawasaki years. He sounds like a bad ass dude. Obviously understands that no matter what he’s learned there’s always more to figure out and give knowledge on. He’s also probably a gentleman, not a debaucherous dick joke, spewing garbage can like your boy. Thanks for watching my man! You are about as OG as they come

@user-ss7ir5cc5p Год назад

Congrats on the new venture boys! Love your guys content the knowledge I’ve got from the vids is awsome the laughs top it off 😂 look forward to see the rc4 build🔥

@mxrevival Год назад

Thank you! We are Stokesd to have you and thank you for watching. 🍆💦

@mmazz30 Год назад

Charles and uncle Tony, good luck in your new ventures with mxskillshack......powered by piss 'n vinegar ????? As an 58 y/old aussie motor mechanic and dirt bike rider, your humour from you 2 knuckle heads is on my level and your partnership was bound to happen. Fun times.

@mxrevival Год назад

Yeah, man! Piss and vinegar!! 😂 we may change that, but we thought it was funny when we were doing the basic website design and silly little things like that. Now it’s time to get into the good stuff. Man, too bad you don’t live over here! Sounds like we would all get into a heap of trouble together. Tony and I would probably learn something Awesome from you as well.

@EliteMotoFactory Год назад

Thank you Bruz!! My best Aussie slang. Wrenched for an Aussie once and he taught me. Trying to figure out what we’ll be powered by. This episode was BOB SAGET! We appreciate you spending time with us from afar.

@mmazz30 Год назад

@@EliteMotoFactory My pleasure, I usually "mazzdebate"🤪when MXR hits our shores around midnite sat/sun. Powered by "Richard and Rocketships" ?

@EliteMotoFactory Год назад

@@mmazz30ewww. 😂. Well all I can say is Richard will always live on with my “special tool”. Love that dude! “On todays episode, we present how to properly use a bearing and seal driver…. Jokes on you Buttheads, ROCKETS!

@mxrevival Год назад

Whole new meaning to "getting off early"! 💦

@mikebrown41182 Год назад

I am glad to see Uncle use nitrile gloves not only for butt wiping but also some proper engine tuning 😎. The bike is coming out really good Charles and the color of the frame is eye porn!

@mxrevival Год назад

We finally got him to clean up properly!! Thank you buddy, your studs should be with you shortly!

@mikebrown41182 Год назад

@@mxrevival Yes i got the package tracking! Thanks Charles!

@PremixandPedals Год назад

Oooh, I loved that intro!!! I had to pause the video for a few minutes to...um...compose myself!!! I always love the videos with Uncle Tony, they are so informative! My favorite part of the video was watching Uncle Tony with that sweet Soul Patch saying Stuck Nuts!

@mxrevival Год назад

Pitched a tent, did you!? 😂 so did I. Damn near flipped my desk over! You should see what he said off camera

@PremixandPedals Год назад

You should film some of your "off camera" shenanigans for a blooper reel!!!

@EliteMotoFactory Год назад

@@mxrevivalMatt Damon

@EliteMotoFactory Год назад

@@PremixandPedalsStuck Nutz

@PremixandPedals Год назад

Gives me chills!!!

@curtiswilcock5628 Год назад

Damnnnn this engine is looking clean nice job man love the build so far can’t wait for the website to be fully live should be fun and to be able to learn more as I’m building my yz450f 2005 engine up in the process of getting the cases vapour blasting and cerektoing

@mxrevival Год назад

Thank you Curtis. Can’t wait to finish his bike up and see who wins. Also looking very forward to getting some more content up on mxskillshack.com for everyone to digest and enjoy. Keep doing your thing, that’s really all it takes is to never quit and keep charging!

@curtiswilcock5628 Год назад

@@mxrevival will be cool too see who wins and that will be fantastic can’t wait to see what you have in store for us 😃 I will keep on with the project but getting hard choosing trusting company’s in the uk to re coat the forks and clamps hard finding them I will sure to keep updated with you guys most certainly better more information to keep up with building its 1 step forward 2 steps back at the minute having trouble with the swingarm bearings and putting the engine cases back in between the swingarm and the bolt but I’ll get there just very fiddly

@mxrevival Год назад

Sometimes that's the way she goes but keep moving forward my brotha & it will be everything and more 🔥

@curtiswilcock5628 Год назад

@@mxrevival I sure will do it’s exiting knowing what the parts looked like and when there done looking brand new can’t wait to get them sorted it sure will be great looking forward to it seeing the outcome of the website too fired up .I’m tied between the colours of the cerekote don’t know what will look the best with ilumnious yellow,green

@joelatkinson2080 Год назад

Another great video!!!

@mxrevival Год назад

Thank you!

@scottvayle4069 Год назад

Awesome!!

@mxrevival Год назад

🙏🙏🙏

@johnny598a Год назад

Good stuff love all the tech

@mxrevival Год назад

Thank you J!

@ktmkeith13 Год назад

Those BRC cases are very impressive . I’d love to build one myself ☠️

@mxrevival Год назад

Life is super short, so I know you will!

@chihuahuaverde425 Год назад

@@mxrevival😄

@brettlaage9687 Год назад

I tried doing bearings like that, and also had to use a driver and I did use light pressure on the press for a few.

@mxrevival Год назад

Sometimes you gotta call in the big guns!

@brandonhendrick7999 Год назад

Awesome pipe and engine build!

@mxrevival Год назад

Thank you my brotha!!

@suzuki06g Год назад

1:02, glad you said that you were still just figuring it out rather than feeling each other out... 😳

@mxrevival Год назад

We’re doing that too. Just on a different site with a higher monthly subscription fee 😂

@lindagresham6777 8 месяцев назад

Just bought one and can’t wait to get it together using my husky T E300 for a donor

@justakidfromchicago7925 11 месяцев назад

That pipe is def from another planet 🤩

@mxrevival 11 месяцев назад

Incredibly sick right!?!? Thanks for watching!

@philsheridan6759 Год назад

Has Tony ever used dry ice to cool bearings they drop in real nice that way. But they could of just been such tight tolerance even that not work.

@mxrevival Год назад

I’m not sure, maybe he will chime in! I’ve seen Cameron do it. That’s one of the cool things about bike building… the several different ways you can make it work. With Tony’s hot plate, I believe there was just a little gap between the two burners where that particular bearing’s home didn’t cooperate due to a lower temperature alongside Tony not having the case perfectly flat on the first try. We made sure to capture that just approve that not everything is perfect every single time. Let us know if you give the dry ice a shot. 📈

@EliteMotoFactory Год назад

Hi Phil. Thanks for the feedback. I’ve heard of and seen the dry ice tactic. I’ve not tried or abopted. I learned this technique from an old teammate of mine at Geico Honda and just stuck with it over the years. This set of cases took a little massaging to get a few bearings to cooperate how I wanted them to.

@brighamprice4630 10 месяцев назад

havent even watched the rest of the video yet but i know my favorite part is gonna be when you grease up a shaft😏😏

@mxrevival 10 месяцев назад

Bro you know imma SLATHER it 😂

@brighamprice4630 10 месяцев назад

@@mxrevival tryna post a video of it🤨

@mxcoolman Год назад

BRC motor kits don't make as much bottom end power as a CR500! or sound as good! But they are a fun idea. Love the attention to detail on your builds Charles!

@mxrevival Год назад

I wonder what the numbers actually are? That would be cool to see 🔥 There's always gearing too, right? Thank you! Need to make sure your bike is over the top so it's worth winnin'!

@bmwe30guy Год назад

I'm here for the stuck nuts

@mxrevival Год назад

More Stuck Nutz methods on my OnlyFans 💦😅

@bmwe30guy Год назад

@mxrevival hopefully no heat required for those

@mxrevival Год назад

@@bmwe30guy They stay hot & ready..... no supplement torch required 🔥😂

@Rooonga Год назад

I’m loving this build! It’s a shame I can’t win anything as I’m in England - but I’m kinda winning because I get to see the build. BTW - that’s no pipe, it’s a tuba! You could have a party in that bell end.

@mxrevival Год назад

I love your perspective… and thank you for watching! Haha someone else just said that…” I thought you were going to play that thing!”

@stephenmiterozos9350 Год назад

You take care of that rad red rocket.

@mxrevival Год назад

We'll try not to pet it too hard 😂

@ktmkeith13 Год назад

What did you guys clear coat the pipe with ?

@mxrevival Год назад

I completely forgot, but I’m finding out right now!

@DannyP_Production Год назад

love the hygge

@mxrevival Год назад

Aren’t they insane?📈

@coryharrell1086 Год назад

Tony got a gift of stuck nuts but wait we got red lube haha i put tht on everything

@mxrevival Год назад

Going to be a bit red for sure!!!!

@EliteMotoFactory Год назад

Tony’s Red hot

@anthonytrahan45 10 месяцев назад

Put a 3/16" stainless plate over the heater. The heat will transfert in it evenly and all the cases surfaces will absorb the heat from a full contact.

@mxrevival 10 месяцев назад

Brilliant 🙌 Thanks for watching!

@MostlyPeacefulCombatVet Год назад

Damn She bad! 💪🏼 Absolutely love the attention to details on these builds! And Exciting news on Mx skill shack! No matter who it is…… if you’re hustling, not trying to push commie propaganda, or trying to put a dent in my freedoms, I want you to succeed…… YUGELY! That’s awesome bruh! Thanks for the vidja, y’all are awesome 🍻

@mxrevival Год назад

Thanks dude! We are stoked to have you over at MXSS! Sounds like it’s right up freedom loving your alley. Many more details to come and Thanks for watching!

@EliteMotoFactory Год назад

Thank you for the support! 🦅🇺🇸. Commies suck!!! We’re looking forward to helping with with your freedoms. Like getting comfy working on your bike and enjoying your self while you do.

@lucasdegagne6341 Год назад

Its not a coincidence, this BRC 500 will give you a rush like BCM #heisenberg

@mxrevival Год назад

Holy crap! Hahaha that never would’ve crossed my mind… we need to get Jesse Pinkman on one of these bad boys, STAT! 😂

@coryharrell1086 Год назад

😂 strap on strap in 😅

@mxrevival Год назад

🤷‍♂️🤷‍♂️🤷‍♂️oops!

@jakecroz747 Год назад

Instructions unclear. both nuts stuck in bottom end. please send help. All jokes aside i really enjoy these build videos with uncle tony. Ive never had the guts to try a bottom end tear down but tony makes it look easy! Actually saw a used bike at edge performance in Ontario for sale that had EMF logos in the graphics. Thought about test riding it just to be able to say I'd ridden a bike built by one of you guys😂 keep up the good work i cant wait to see this monster when its finished

@mxrevival Год назад

Hahaha well, we are stoked to teach you absolutely everything we can possibly muster up over at mxskillshack.com! Tony is a stud, and you can also do anything you put your mind to, Jake

@EliteMotoFactory Год назад

You rule Jake! Thanks for the compliments. Maybe you’ll win this hawg and ride a bike built by both of us.

@jakecroz747 Год назад

@@EliteMotoFactory that's the dream haha

@martinventer1383 Год назад

I'm in south afrca. How can I enter please, please, please

@mxrevival Год назад

I really wish our contest was worldwide, but it is not at this current time! Still greatly appreciate you watching and being interested. If you have a relative in the United States, that would definitely work! They could enter for you.

@spork929 Год назад

Stuck nuts are better than rocketship seal drivers.

@mxrevival Год назад

Hahahahaha

@EliteMotoFactory Год назад

But wait, there’s MORE! Billy Mays

@msrx08 Год назад

The Anaconda Exhaust.

@mxrevival Год назад

Never ends!!

@andrewwilson9130 Год назад

Is uncle Tony haiden deegans old mechanic?

@mxrevival Год назад

He is not, Deeg is a little after his time on the professional Circuit before going solo

@EliteMotoFactory Год назад

Hi Andrew, thanks for asking. Well funny you ask. I am not, to answer your question. Haiden was 4 years old when I was working with Ronnie Faisst and going to the Deegan’s to test and put in time for xgames speed and style. Danger Boy became a nickname due to him being sketchy on little bikes….

@andrewwilson9130 Год назад

@@EliteMotoFactory oh, wow that's sick!

@TNTMOTO Год назад

Ok best part for me was the Male/Female anatomy and Stucknuts section.

@mxrevival Год назад

😂 I bet you’re not many people caught that! Thanks for watching Brother

@mxrevival Год назад

Hey dude! I selected your comment as this episodes "Stuck Nutz" winner! Please hit me here so I can shoot you a free code! www.mxrevival.com/contact Thank you for watching all the vids! (PS: it's really me, you really won) 💪

@ArdenBallard Год назад

Between peening and stuck nutz, I’m getting a little hot and bothered 🥵😂

@mxrevival Год назад

SO MUCH PEEN!!! 😂

@cplandrew Год назад

You started the dick jokes without Uncle Tony!😮

@mxrevival Год назад

Had to warm up 😆

@paddymc6078 Год назад

I don't under stand how these can be called the ultimate 500cc it just a bunch of mix matched parts squashed together to make a bike the ultimate 500cc 2 strokes are the ones that actually won championships and all made at the one factory noo poo on brc tho there the only ones really jumping to keep the beasts rolling into the future

@mxrevival Год назад

To understand the title better, just think a bit about what you would title your videos if you wanted people to actually watch them. My goal with the titles (because RU-vid is a search engine, and I want people to watch this stuff) is to make sure there are plenty of keywords that are accurate in the title, as well as it be written in such a way that somebody would actually want to click on it. Not always meant to be taken literally, although you are absolutely right about what BRC is doing…. And I still think it will be one of the most ultimate 500s. 😁 Thanks for watching dude!

@ArdenBallard Год назад

I haven’t seen this much blowing since Hunter Biden’s Chinese New Year party. 31:39

@mxrevival Год назад

He was for sure “Bi-den” somethin’! Probly a pillow!

@MostlyPeacefulCombatVet Год назад

Lesbihonest here……… Sometimes……… I just miss the way he says…. CHY-NA

@mxrevival Год назад

Chyyyyyyynnnaaaaaaaahhhhhh

@EliteMotoFactory Год назад

Because it came from Chyna so it’s the Chynavirus, lol