Building the World's Lightest 3-Inch FPV Drone

Подписаться 18 тыс.

Просмотров 59 тыс.

50% 1

A 33g 3-inch toothpick? Oh yeah! This thing is awesome! It has quickly become one of my favorites for ripping around my backyard and community parks. You gotta see this! Full parts list and tune below...
There is no bind-n-fly drone like this at the moment, but all the parts are listed below. If you want to skip the build, then I suggest this 2.5-inch drone: bit.ly/2OmkbHw. It's also pretty amazing and has a similar light weight feel.
Parts:
- BabyTooth Frame (1.5mm thick version): bit.ly/babytooth_3in_frame
- FPVCYCLE 1202.5 Motors: bit.ly/2U1YUHj
- BetaFPV F4 AIO w/ VTX (I used the older FC without VTX but I think it has been discontinued): bit.ly/360DJtO
- BeeBrain v2 Canopy: bit.ly/3a12kjb
- RunCam Nano 3 Camera: bit.ly/39w6QFK
- Gemfan 3018 2-blade props w/ 2mm shaft, as shown: bit.ly/2t3Ee6Y
- Gemfan 3016 3-blade props w/ 2mm shaft are another great option: bit.ly/2tM6NWN
- RENY screws on the canopy: bit.ly/3au3KD5
- Custom Rx and VTX antennas made by cutting these cables: amzn.to/2UoTOFg
- M2x3 motor screws (titanium if you can find them).
- Cloth tape for motor wires: amzn.to/2GUm5PD
- 2mm zip ties for antennas (Cheap option: amzn.to/3bSgBAu, better option: bit.ly/2DVSsfF)
- No prop screws (they are already tight enough with the 2mm shaft)
- 20AWG power lead
Batteries:
- GNB 450mAh HV 80C 1S: amzn.to/2Rh9ojz
- GNB 520mAh HV 80C 1S: amzn.to/2QV5AF6
- BT2.0 connectors: bit.ly/33XOhHW
- Check out this video to see how I replace the battery connectors: • Replacing Battery Conn...
Tune:
- JESC 48kHz v2.3 (this free ESC firmware makes the drone much smoother and more efficient)
- Betaflight 4.1.1 with RPM filtering turned OFF
- Thanks to FaebuFPV for sharing this tune: bit.ly/2Jkzrme
Flight footage recorded with the PowerPlay DVR:
bit.ly/power-play-dvr
Music:
"Accidents Will Happen" by Silent Partner

Опубликовано:

28 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 319

@NURKFPV 4 года назад

Easily the most insane 1s I've seen.

@MrShutterBug 4 года назад

Hi Paul! Yeah, this thing is pretty sweet for tight spaces. Did you see this follow up video? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bUUcPVNV2AA.html

@Sircleanfpv 4 года назад

Faxxx

@Kabab 4 года назад

Check the next level 1s platform I'm working on 😏. instagram.com/p/CAzjbhYnH7m/?igshid=c9z126h1j2ue

@leffler2 4 года назад

Sweet flying session!

@CricketyChris 4 года назад

Love the way you explained the build to the fullest. Great job!

@sixtofive 4 года назад

That is some really impressive backyard flying!

@JerryCalverley 4 года назад

That thing is locked in! Handling is incredible! Mad skills on that tight technical space!

@friendlynomad9840 4 года назад

Fantastic video! We need more 1S toothpick videos!

@michey7822 4 года назад

Oh wow, just the same setup i was wishing for a 1s build!! Thanks!

@Clif_Brown 4 года назад

Awesome flying! You really ripped your backyard on 1S and the double deck powerloop shows what that little Babytooth can do, and great build!

@MrStrikeforce1987 4 года назад

I just wanna see this class get better and better!

@RubyS.1 3 года назад

That's an excellent tune thanks Fabeufpv. Even on my fatty 38.3 gram build. These builds are so much fun

@donphobos 4 года назад

I have managed to purchase 4 motors, canopy and some props today. Nothing else was on stock, but now I have the basics for a future build. This will be sooooooo exciting!

@RosscoStixFpV 4 года назад

Wow that little thing rips, definitely the fastest 1s i've ever seen 🤘🤘🤘

@tribefpv 4 года назад

Nice build mate ive all ways wanted a 3" amazing flight times

@metoo3918 4 года назад

I'm so jealous of your mastery of tight quarters.

@atreyu-gt7wj 4 года назад

Dude.. That freestyle vid is absolutely one of the best freestyle vids I've ever seen 🤯🤯🤯 absolutely amazing!! I'm flying the crap outta my shutterbug85 and now I have to build this!!

@jcfpv3454 2 года назад

wow this looks like so much fun.

@harrytmurphy8438 4 года назад

Great Job ! a very nice, clean, good looking build. The motors are shear beauty. I also like that you explained the antenna modifications. Personally, I do not like the tiny, single little wire that comes on most whoop boards. Thanks. Again, Great Job. And the flight video is AWSOME.

@crapistheshit3840 4 года назад

Great job shutterbug!!♥️

@djs134 4 года назад

I just used the pids from the link u have above since I have 4.1.0 I didn’t want to copy it all and it flies great now, ty

@grahamjw75 3 года назад

Amazing!! Agree with other comments that was crazy good, excellent job!!

@johncarold 4 года назад

Sweet 3in , I have always flown in front of my house, I have 7 3in and smaller to my beta65. I just finished building my Ragging Droner Hybrid with 2306 1950kv Momba's 6s but I have a thing for 3in. Thanks again for the video and information

@electroddxful 4 года назад

That is some epic flying buddy 👍👍👍👍👍

@bryanzippyfpv5995 3 года назад

always love it when you dive the big trees :-)

@MrCoreyd15 Год назад

Sir you brought my mind into a whole new world of fpv

@michaeljohnson6473 4 года назад

That dive in the beginning was HUGE for coming down into such a small area.. AWESOME!!!

@dinosabic5383 3 месяца назад

Been watching a bunch of your videos lately and they have me inspired to start building some ultra lights...... 4 frames on their way😅. They look like such a blast to fly! I have only ever built and flown >750g 5" quads or larger.

@nikfpv3456 4 года назад

Dude this is badass

@stevenkelby2169 4 года назад

Awesome review thanks, I plan to buy one. 🍻

@WildpixFPV 4 года назад

Incredible, amazing, fabulous! That build, that flight and all around! I'm stunned and subbed. :-)

@alan6708 4 года назад

Great little quad, i am impressed judging by your flight it has the same flight characteristics to a 5 inch which i do like seeing most micro sized quads do seem to have too much float .

@dheebb3537 3 года назад

Very very impressive!

@jtr918 4 года назад

Your the best pilot I ever saw!!!!!

@pksteffen 4 года назад

Love my babytooth too! Great tips for putting it on a diet. Cheers!

@aaronyee7411 4 года назад

Good job! I love the light weight builds. Most important thing is being able to fly as much as possible. That means you need to be able to fly around people and that’s why these light/quiet builds are so amazing.

@aaronyee7411 4 года назад

Oh one question. For the reny screws are they easy cut down for length? Would it make sense to buy a pack of long ones and just cut them down to length or will that not work with these?

@MrShutterBug 4 года назад

Yes, they are easy to cut to size with with wire cutters. Just be careful because the bit that breaks off will go flying pretty hard!

@Sircleanfpv 4 года назад

Insane, never thought a 1s could have this performance 😮

@Unnaymed 3 года назад

Great work ! Thank you ❤️

@EDerable1 4 года назад

A very neat build👍🏻😎👍🏻

@fpvclub7256 4 года назад

wow, very quick.. Gets moving fast!

@ianpluska5667 4 года назад

Nice video!

@ctatyc 4 года назад

Awesome drone )

@GoDroneX 4 года назад

very well done video. great job.

@ivantran3420 4 года назад

woah no wayyy can't believe that's 1s. great job man

@alexanderalexandrov4696 3 года назад

very nice flying )))

@GiffysChannel 4 года назад

Haha, You're intro is the same for a VR channel I watch called Eric for President. You're one stop shop for VR news lol

@cedricgrandseigne 4 года назад

When Kebab Fpv started experimenting on mobula7/trashcan move to a carbon frame, I told him, the motors weren't torquy enough, but he isn't listen, so I built one myself. It is a 2,5 inch, and it came up at 35g in 2s. I recently updated it with nano3, and mobula6 canopy, and lost 5g!

@stevenkelby2169 4 года назад

Wow you sound much smarter than Bob, with your 7 subscribers... Have you got a video of it?

@cedricgrandseigne 4 года назад

Whaouu, I didn't know intelligence was linked to the amount of suscribers, gosh, I am so stupid!!!

@CarbonGlassMan 3 года назад

I'm going to have to build o e of those this coming year.

@marielizysurourcq 4 года назад

OK. That's awesome quad and flight. You win ;)

@Kabab 4 года назад

At a full 10g less than my main BabyTooth, that thing is pure AWESOME and really a class of its own. If anyone wants to see the very lazy way I build mine by comparison, here's the build video that will be public when the parts are in stock in about a week. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ai_oqRC-KG0.html I actually call these gemfan props medium weight. Like you said, I believe they could be maybe even half as heavy as it is. The motor size had to be balanced for this prop and the hopeful future props that may come that are lighter.

@leftyfpv8263 4 года назад

wish we had those motors in europe Bob,hmm hmm

@shorty430551 4 года назад

@@leftyfpv8263 I wish we had those motors here in the US. There seems to be a shortage of the unobtainum they're made of.

@Kabab 4 года назад

@@leftyfpv8263 I wish I could get the darn box! Ain't nobody getting any motors grrrrrrr deliver! Plzzz! 😬

@gapsnapperfpv3947 4 года назад

No Bob this dude wipped your sloppy building ass then flossed .!

@FilipRadelic 4 года назад

@@Kabab dud did you order 5 sets of these or what? Went to sleep, got a back in stock notification, boom woke up to 1 left in stock... 😭

@windwalkerfpv 4 года назад

nice build! making (3) 3S TP3's, this made me want a 1s for the yard.

@MrShutterBug 4 года назад

A 3S quad can be a ton of fun too, but yeah you need more space to take advantage of the extra power.

@pierremeunier 4 года назад

really nice videos dude , subbed !

@TheSmurfPenis69 4 года назад

You gave an idea- I will put the FC of a beta65 pro 2 on a HX100 frame with the long props and also leave the hx100 motors on for longer flight time. Much thanks for this and much 💕

@TheSmurfPenis69 4 года назад

I did that and it’s such a great flyer. Same as you said- very very acrobatic and super efficient. I actually tried to grind out the batteries and still got 6 minutes flight, on normal cruising about 8 minutes with two 1s 340mah tbs graphene (which are awesome batteries) and around a minute less with the stock batteries (300mah). I get only around 2:30 minutes on the 65 pro 2 build, and it’s much less acrobatic, the only downside is that now it’s much scarier to fly in places where people might pop out of their homes since it’s much less “hurt proof” now..

@Andrew_O 4 года назад

Fantastic job! We need this mass produced as a BNF!

@Kabab 4 года назад

A dream at the moment. But no worries, happymodel will rip it off and make something before I get any help from anyone to make this a more mainstream class. I do all the work for happymodel unfortunately 😒

@stevenkelby2169 4 года назад

@@Kabab If you can get it produced, we'll spread the word and market for you, as much as that helps.

@ryanbethel6168 4 года назад

Adam Bomb FPV will build it for you. 👍

@dndon2007 4 года назад

that was a very good flying 👍🏻🙏👏👏👏

@onclefly8450 4 года назад

Hi, nice speed for garden 🤗

@qygpygpq707 4 года назад

wow.... this is over 10 grams lighter than my 2.5 inch quad! realy like the way you are flying... or is it the quad that fly that well? ;D nice video, thank you

@highlandcrawler 4 года назад

That's a pretty impressive setup. Nicely done. I gotta wonder how much extr weight is still hiding in the hardware. Seems like 8 aluminum motor bolts vs the titanium ones could drop another gram or so.

@cyborgfpv7361 4 года назад

You fly very nice and fun

@rc-fannl7364 4 года назад

Amazing build and flying. Maybe for connector using Mini Deans would be a nice solution, with less voltage sag, but adding less weight than XT30.

@MrShutterBug 4 года назад

Micro Deans would also work, but I prefer BT2.0. The can handle a similar amount of current.

@Streamlines 4 года назад

I found M2 titanium screws in a RC car shop. In fact a huge sortiment of titanium screws ranging from M2-M3 or M4. That's over here in Europe tho. But couldn't find any titanium screws in drone shop either.

@carlocolombari7371 4 года назад

Great build! Thanks @Mr ShutterBug , your video is very clear. Thanks also to @KababFPV that he had developed this new serie. I'm in Italy and we are closed at home by week waiting an improvement and the avaibility of the motors !!! hahahaha

@rickdeckard7549 4 года назад

Stay safe brother...greets from DC!

@Crftbt 4 года назад

That shirt is awesome!

@fcass 3 года назад

This is very impressive for a 1s of course. Could you please design one for us (not 1s) with the caddx Vista (and probably nebula)? I wish they would make those air units lighter.

@gapsnapperfpv3947 4 года назад

Your weight focused video was amazing thank you very much ! My TP3 frame is actually being retro fitted at the moment because I went with heavier components and assuredly much less detail than your meticulous build. I started off WRONG with beta FPV motors in 1202 x 5000KV and my Cam is a Run Cam Nano V2 and a fairly heavy VTX from Flywoo the Goku. It rivals the TBS Nano but has a case for a heat sink. I may replace that. I'm going up in motor size to 1404 to achieve a better preforming little Toothpick. I hope $$ conditions work out that I can just do a fresh build, on a new TP3 frame . Oh I have a Crossfire Nano Tx in this build as well , so I;d love a tiny little AxII on it . I notices you didn't mount a capacitor ... I was cool with a heavier toothpick but my weight ratio wasn't preformant with the chosen motors ... Again thank you for the video I appreciated it . These FlyWoo Xing motors look awesome I may not be able to wait for a new TP3 frame and a new AIO Diatone board.

@BikeGuyFPV 2 года назад

I think I just about had a heart attack at 2:55 Awesome stuff!

@CricketyChris 4 года назад

Me: how lite could he possibly make it? Me again: damn! 🤯

@andrefonseca1873 4 года назад

very nice!

@bert5376 4 года назад

Hey Mr. SB, I don't suppose we can get a build video for this. Specifically for making the antenna and removing the plugs.

@WEEBER13 4 года назад

Nice work dropping the weight! Now if we could all personally do the same after this C-Virus stuff passes!

@bricebride422 4 года назад

Hello , First of all thank you for this superb video. I want to mount a thoopick almost identical to your except for the FC or I will put that of the mobula6. I wanted to know if I could also use your betaflight settings this FC, thank you in advance for your response and your help.

@duderguy1571 2 года назад

Have you tried the new betafpv Elrs 5a aio on that yet? Its amazing btw, range for days! I got mine on BF 4.3 rc5 . Thanks for the sweet build. I got one running the newer white fpvcycle 13mm motors. and one with newbeedrone 1202 flows with tbs unify nano 32s. I swear these things multiply by themselves 😂. ✌

@MrShutterBug 2 года назад

Yes, I've used the BetaFPV ELRS 1S is multiple builds already. The ELRS chip antenna is definite a great option for these ultralight builds. :-)

@clintkelly8894 4 года назад

Really nice build! See you are even saving the economy.....I look forward to your next video after my online shopping.

@ianswenson3166 4 года назад

I am running a Primo3 with the new HQ 3x1.5x2 props and they are absolutely buttery. I was less impressed with the 3-blade version, which came as a surprise; I usually prefer a 3-blade prop but these felt like simply too much prop on 1102 motors.

@friendlynomad9840 4 года назад

Like others have commented, it would be super useful to have an expert do a build and flight video of a very similar toothpick with more obtainable parts. The closest screws I could find (for USA) was a "Reny Like" screw set, where the nuts were regular nylon, at $28USD for 50 pieces. Also, we could use a motor alternative that's easier to find in stock, like a 1202, 1202.5, or 1203 motor. Thanks for your hard work!

@MrShutterBug 4 года назад

You don't have to use all the specialty screws. The frame comes with steel screws, and it will still fly quite nicely that way. These are the motors that I recommend. I'm told they will be back in stock by Monday. If you want to try something else, then go for it. Hopefully I gave you some ideas. ;-)

@friendlynomad9840 4 года назад

@@MrShutterBug The 1202.5 motors are back in stock at FPVcycle now. I'm super excited. All is well in the world now. :)

@jeremychotto2688 4 года назад

Awesome build and flying my friend. Love the collection on your wall behind you. What do you use to hang your builds on your wall?

@MrShutterBug 4 года назад

Thanks. Just nails in the wall. :-)

@danlatu209 4 года назад

I would love to see someone make small square lipo’s!

@nathana5379 3 года назад

next step is 1S build for 4" and 5"... I honestly would love to see it happen. maybe 850mah -1100 for 4" and possibly 1300 - 1500 Mah for 5"?

@cccagley5276 4 года назад

Great build. FPVCycle never has anything actually in stock. I don't understand a website where almost everything says "Sold Out".

@Kabab 4 года назад

It's unfortunately not totally up to us. We have all our money sitting in factories just waiting for them to finish producing and ship them. Right now we have five boxes sitting in shipping depots waiting to move and make it to us. The whole world has slowed down a LOT due to this virus. Things we were supposed to have three months ago are still in processing. Believe me when I tell you I wish I could get it all here now now now NOW! Because I have so much more to do once this stuff finally makes it here.

@MickRatanapanyo 2 года назад

Please try Emax Avia props for Nanohawk X and let us know if they're more kickass than Gemfan. Thanks

@branmanfpv1593 4 года назад

Nice flying buddy. I’m still a bit new but I’m practicing. I have been posting some videos on my channel. I only have a Tinyhawk freestyle but it’s pretty fast on 2s. I we will be getting a couple faster ones real soon. You ever consider building one of these for someone?

@Squirrelses 3 года назад

So, why a BF4.1.1 tune with RPM Filters turned off? Especially with JESC fw already flashed? (Used your video to help setup my BT, great notes!)

@ChristKrew-Rev1.8 4 года назад

Hey ShutterBug.... can you use one of the xm+ antenna's to replace the stock one? Just not sure of length. My build came out chunky right at the 55g mark lol.

@ChristKrew-Rev1.8 4 года назад

Can you show us how you inverted your board in betaflight and remapped your motors in betaflight? This is the only part that has me a little intimidated. Thanks for the review and that great footage! Love this class as this will open it up for 2.5" and 3" park racing clubs. The nearest field we have to us is 2 hrs and another 3+ hours to fly 5 inch. Much rather drive 5 to 10 min to hang with family and friends to race at the park. Also.... love this size at it will allow for the kid and I to race around the yard without bugging the neighbors. Thanks again for sharing.... this is getting me motivated.... just need help with the betaflight aspect of this sport/hobby.

@MrShutterBug 4 года назад

In this video (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gL1DxUFjFq8.html) Josh Bardwell shows how to remap resources, including motor resources. You'll need to swap resources for motors 1&3, and motors 2&4. The board orientation is set on the configuration tab in betaflight. Just set roll to 180. Then save, and go back to the setup screen with the 3D model of the quad and make sure it moves the way it should when you move the quad in your hand. Good luck.

@ChristKrew-Rev1.8 4 года назад

@@MrShutterBug Yea that was a great video.... but a little fuzzy on inverting the board. Is it just 180 and done?

@turboomni848 Год назад

Great video! Building one now myself with a crux3 frame and kabob motors and will try a happymodel AIO elrs 1S board. My question is Reny screws . Are they able to be cut (threads) cut to length without butchering the threads or crushing it ? I would rather buy a bunch that are too long and cut to desires length if possible. Big fan and thanks.

@MrShutterBug Год назад

Yes you can cut RENY screws to length. The bit you cut off will go flying so be careful. I have not had any problem with crushed threads, but if you are worried about that then you can put a nut on it first. If you then back out the nut, it will clean the threads for you. Have fun!

@backcountrybluegrass4770 4 года назад

yeah i want one now.

@DMarko22 4 года назад

You really should work for a production company...this is amazing!

@MrShutterBug 4 года назад

Glad you like it, but I have no interest in turning my favorite hobby into a business. Just having fun and sharing the things I enjoy. :-)

@DMarko22 4 года назад

@@MrShutterBug It worked out quite well for the Shutterbug85, but I get the point. Stay safe!

@DNLKRNWN 3 года назад

any tutorial/guides on making vtx antenna using ufl to sma ext like you did in this vid?

@bob8086 4 года назад

Fast little thing. 1s is crazy. Makes me think abt weight more on my quad...

@fpvraver 3 года назад

I have a question about the Reny screws. I’m considering ordering the M 3 30 mm Reny screws for my stacks in my 5 inch quad. There just for the stack no arm support. So my question is is Reny brittle? Compared to nylon is it brittle?

@clintkelly8894 4 года назад

Quick newbie question. Did you solder two seperate leads off of 5v and ground at fc to run to vtx and nano3? This is my first micro build.....these pads are so small.

@Monolize 4 года назад

Instead of BT 2.0 take a XT30 from Amass and cut them apart, take the bulletpins and you have even lower resistance at the same weight of the BT2.0.

@stevenkelby2169 4 года назад

Pics?

@Clif_Brown 4 года назад

But you also have the weight of the XT30 battery-side connector that adds some back from BT2.

@BornIIfly 4 года назад

On my VCT-75X, I squeezed the nano-can 2 into the Mobula6 canopy 🤣🤣🤣 but it works! I just need to fix a good antenna for the diamond VTX 🤔. The lollipop foxeer just keep being ripped off 🤦🏻‍♂️. I wrecked a VTC already. Nice build! Could you fit the new BetaFPV 35am F4 BlHeli_32 on it € run 4-6S on it? 🤔 best wishes & take care.

@MrShutterBug 4 года назад

Could you mount that 35A FC? Sure. Would you want to? Probably not. It would be totally overkill and add a bunch of weight. The point of this build is to be super light, super quiet, and fun to fly in places that you couldn't fly one of those more powerful drones. But if you want more power in a 3" then check out my videos on the TWIG.

@BornIIfly 4 года назад

Mr ShutterBug yeah would agree, overkills can cost 🤦🏻‍♂️. Thank very much for your reply & opinion. Will try your setup & see how much fun I get out of it 😉. Stay safe & take care, happy relaxing flights.

@carlocolombari7371 4 года назад

Mr ShutterBug, what do you thing to test a 3500mA Li-Ion? It should be the first long range of this size

@reboot110 3 года назад

I’ve got some low kv 1304’s I’ve been looking for a home for, think that a 1s will spin em?

@kolibrif8242 3 года назад

Thank you for sharing this! I am wondering about ESC requirements for such 1s toothpick (with Gemfan 3018). Any problems with standard Whoop FCs rated for 5A/6A? The 1S AIO from FPVCYCLE goes up to 9A. If higher amp ratings are recommended, what alternatives exist (NewBeeDrone HummingBird F4 sounds good from the specs)?

@MrShutterBug 3 года назад

I have used the 5A FCs and it has been OK, but that doesn't mean it will always be safe. When flying, 5A per motor (20A total) is more than enough, but the peak current could be higher for short durations, especially in a crash or when using turtle mode. That is usually when people burn their ESCs. So yes, the FPVCycle FC has a higher current limit and should be more robust in those situations.

@kolibrif8242 3 года назад

@@MrShutterBug Thank you for the quick response. It gives much more FC options for such light-weight toothpick.

@tshirtfactory07 4 года назад

Awesome video!!!! Even cooler quad!!!! Ive been flying 5 inch freestyle/racing for about 4 weeks now. Would you recommend this as something i could practice with around the backyard? What im asking is, would this aid me in becoming an all around better pilot for my 5 inch set ups?

@MrShutterBug 4 года назад

The best way to get better is to keep flying and to keep pushing yourself. Whoops and toothpicks have definitely helped me get better because I can get stick time anywhere, and I can take changes without breaking stuff.

@tshirtfactory07 4 года назад

@@MrShutterBug thanks for the response and advice!!!

@tshirtfactory07 4 года назад

@@MrShutterBug you've got a subscriber here!

@___echo___ 4 года назад

awesome build! Im curious if its a bad idea to use 1103 motors instead? I can't buy from FPVcycle sadly since I'm limited to one payment method which isn't on their website

@MrShutterBug 4 года назад

I have not tried all the motor options, but I remember talking to Kabab back when he was doing that. He said the wider stator or the 1202.5 really helped control these larger props. So, I think an 1103 would certainly work, but it might not control quite as well. I'm hoping that we can get some lighter prop options that are designed for press-fit. If we get that, then 1103 will probably be great!