Never thought a 1S quad could fly this good! FPVCycle BabyTooth vs NewBeeDrone SavageBee 

Bob is quite the guru!! I trust in him more than any developer in the fpv market. He's honest and fast about his research. Not to mention he is an all around super nice guy!!

"This is my dog Mamba." "What breed is that?" "Diatone" ok, I`ll see myself out.

Dude I wish that I had that house, barn and area to fly FPV. you are one lucky dog to have such nice area to fly FPV all day long.

I appreciate all the time you’ve put into teaching us all the ins and outs of this FPV addiction. ❤️ the channel 👍

I like it, he names his dog after flight controllers! Great review as always!

I appreciate how honest you are about the nano quad building. I felt it went understated in other review videos of nanos.

Great of JB to fit this review into his schedule. Since I’ve never flown one, I appreciated hearing his perspective vs. 5”. Newbeedrone needs to dump the PH2.0. Looking forward to a Babytooth build in 2021.

Ok I'm sold. I would have never guessed these quads were only running on 1s. Amazing

The xt30 is in insane improvement over other connectors , I moved to it from ph2.0 and it gained 1g weight but has no sag now and better speed

Bought the 2s version of the savagebee with crossfire! Thanks for the review!

I built one of Bobs Babypics, absolutely love it!

Joshua!! YOU ARE getting so GOOD at this... i had sooo much fun watching this... thanks

I've bought the Fouride frame and his 2203 motors and am very impressed with the design and how well these parts work together. I imagine anything he associated him name with is top shelf stuff.

Off the subject, I'd like to thank you for helping people who struggle with questions and your guidance to being the best pilot you can possibly be. Your whole "3 packs a day" has inspired me (and I'm sure many others) to do my best to get at least that much flight time in a day. The end result is, at least for myself, an experienced LOS pilot who was nurvous to loose hundreds of dollars learning to fly FPV in fear it would be gone forever... Lost to that troll hiding in the trees waiting to steel my quad when I loose control, to becoming a confident FPV pilot who only flew auto level, and progressed to Herizon mode, and now confident that it's time for full acro mode. You are appreciated.

Thanks Joshua. I have a babytooth and toothpick 3. They aren’t really hard to build but you do need patience and a fine point on a good soldering iron helps. I found the curved pointy tip on a hakko really helped. Actually, aren’t you due for another build video?

Amaizing content. Keep up the great work👍👍🤟🔥

1s 3" props!!! Just translates to pure fun my brothas!

Sold out!!!!!!!!

Awesome review Joshua, welcome to the wonderful world of Toothpicks. Happy Flying !

I totally agree, got several Toothpicks from Bob and they perform absolutely great and it is a fantastic fun to fly them. And I personally think that its a good thing to support the inventor of this whole class of quads. Thank you, JB, for this great review.

The caddx ant image is so good! I was just wondering about it (because weight and price) and you show us this perfect flight footage! Thanks, JB! 😆👍🏻

Great vid JD, Im gonna have to make an addition to the Drone family. Have a great Christmas

These are the future of fpv! 👌

That looks so fun to fly!!!

You do make different outros, where you move and or change the items in your fridge. Classy as always JB

GapSanpperFPV here DUDE My 3" Kabab frames are the BOMB!!!! 1404 motors heavier than most 3" builds but Crossfire & all the things just a freaking mazing !!!! But I run 2s 550mAh batteries.. Oh and I alternate between tri blade tiny hawk props and the bi blades depending on what I want to do

JB can you make a video series dedicated to the science behind choosing parts to build drones? matching escs to motors, how to choose flight controllers and vtx?

Fpvcycle is killing it

Great video thank u JB

Impressive, looks like a fun little ripper!

Hey Josh. Thanks for a lot of awesome videos. I found your video on checking your ESC. Do you have one on checking FC? Kind regards from Denmark David

Loved the video, but liked it for Mamba. You should make a video about that nice camper.

hey great review jb

I dream of the day we can get a 1s DJI HD-FPV all in one board in a quad at the same AUW weight.

I only ever built a zmr250 when kk2.1 was a thing(buttons and tuning on your fc). Naze32 fc seemed to complicated to me then. I came back to quads years later and built bob first 1st 1c build and I didn't think it was that annoying to build. With hardly any soldering or no beteflight experience it flew great. Hardest part was figuring out betaflight and how to setup a decent transmitter.

Bob has so much intuition for these little flying things, i trust his opinion more than anoyone else

Just skipped from the most recent Linustechtips video because you posted a new. Looking forward to this

when i started flying drones (this was during the start if micros...the tarot 120 was famoslus that time) , I decided I needed to build brushed micro drones. I had broken tons of brushed boards cause I couldn't solder properly to a point that the shop keeper gave me a free board

Building the Babytooth is really very painless, compared to other tiny quads, using Bob's 1S board. This is especially true, if you buy the Zees 1S board w/Crossfire and Pro32 Nano pre-soldered to it. It simply attaching the motors(large pads) and the camera(use the Caddex Ant lite). It really is the easiest 1S build IMO. MaddProps Bob!

Those look so fun

15:05 "Don't hit yourself in the head, Bardwell." Lmao! I'm obsessed with toothpicks. Thanks for the review, Know-it-all. 👌

two quick observations, you can order the FPV cycle with TBS Crossfire + TBS rpo32 Nano soldered on, You only need to solder the motors and camera and it's not difficult. Also I find flying this is way more fun then a 5in when your confined to a small location.

My Kabab Babytooth is so smooth and buttery. it just floats around. I didn't find building it all that fiddley. Well, with the exception of de-pinning the R-XSR to conserve weight. I went with the TBS nano 32 VTx. I used tri-blade props because there were no bi-blades at the time. It's very quiet. The pads on the Zeez FC are easily accessible and with a small tip, soldering was not all that challenging. Although I would not recommend it for a first-time builder.

crazy how much has changed in a few years in this hobby

I like a Mini/Micro Dean's connector -- about half the weight of an xt30 but has all the current carrying capacity you could need in 1s or even 2s space under 1000mah.

Can't wait for the vista to start being used on quads like these

I have a BabyTooth and it flies amazing!

I built my baby tooth with a mobile 6 board, canopy and camera, gnb27 connector and 1202.5 11,600kv HGLRC motors. I love it. I use gnb 530mah 1s and it's become my "lunchbreak" quad. I get an hour, and I use the whole hour with my goggles on.

Drone life should be free to fly wherever by now it’s not likely causing harm to anyone. But keep up the great work 👌🏽👍🏽

That was my reaction as well when I got the Ant camera!

Obviously you can switch out a spi receiver with a full range receiver just by messing around in the ports tab, is it possible to do an aftermarket vtx switch on the Newbeedrone? that would make it so much better for me

I want a babytooth so bad! Such an awesome backyard ripper

Thumbs up if you want to see Joshua build a micro just to see him cussing the whole time 🤣. Add in a MiO cocktail and I think we have a winning video.. 👍

Whoop there it is! I know your old enough to get that Bardwell

Savagebee is an epic backyard ripper for first time toothpick flier. Babytooth rules. As Joshua said weight is important, Mr. Shutterbug has a super lightweight version for weight weenies. I use BT2.0 and 450mah and it’s lighter. Swapped FC on my Savagebee to Bob’s Zeez with BT2.0, glued in Ant lite cam like Babytooth and used CRSF nano and now it rules! Thank you Bob for refining what started with brushed motors way back when. This class rules because of his research and hard work!

You said the resistance of the ph2.0 was a problem and also the smaller battery not being able to push the current. I think it's more about the battery then the connector. Them 300 mah are on the edge of being able to handle these guys.

I built a baby tooth class quad with the sanchez air frame , an open source available for download at Thingiverse. Mine is 38g dry and my favorite quad. It is the perfect quad for backyards. Fast , light , quiet , need I go on ?

This guy knows everything about everything.

SavageBee camera is ROUGH. Reminds me of whoops from 2017. Not good enough in 2020.

Something you missed when it comes to which you should buy is availability. I've wanted a BabyTooth for months now and have been sitting on the list to get a notification when some of the parts are available for a while now. So far, I have the frame, canopy, and camera. I've been considering buying the SavageBee just because I really want something in this class but I'm losing hope on ever grabbing the AIO and motors from FPVCycle.

"You can buy the parts from kebab on his site" lol, I've been trying to get the FC and motors for a couple of months now. They seem to always be out of stock, so I ended up finding a few other roughly similar parts. It's an amazingly fun little quad, and it's super quiet so I can actually fly it at the park! Also, they definitely are very durable. Part of it is that if they fall from a great height, the prop disc area effectively acts like a parachute. I had mine fall off a ledge at about 50 feet and it didn't even have a scratch on it.

Any impact if we did a Babytooth with the BT/PH2.0’s? We’re currently learning and building the freestyle Movula6’s so we’re building an inventory of those recommended folded 1s batteries and would love to just use one battery for all builds.

Hard to go wrong with a Baby Tooth!

Joshua, I wonder how the Savage Bee would do with a BT2.0 connector? Seeing as your tests showed an increase with that connector.

Love the doggo interruption, he is a good boy

Hey Joshua, if you want some weight (and RIDICULOUS long flight times), solder a XT30 to a 18650. 😉 Anyway, fantastic flying and review! 😃 Stay safe there with your family! 🖖😊

LOVE the Babytooth! Long live KababFPV

I just had to replace my power lead on my savagebee and now when I take off my amp draw goes straight up to 18a then my battery drops voltage and slowly falls to the ground. Did i F up the board?

Even only watching the video static and RSSI warnings make me anxious. I just cannot go back to that anymore. The huge advancements in toothpicks is maybe one of he best things in 2020.

Joshua, need some help- please. I have built 2 mini 4 cell mini whoops and they were put together and run on standard Betaflight PIDS.On Betaflight,the engines accelerate fine. When using the transmitter, the wind up strong, then quit- not flyable-- what am I missing? I thank you in advance fo any help you can give me>

You should concider doing a review of this KO method motors. They have some kind of oil cooling system and you actually freeze them with some kind of spray🤯

Hi Josh, could you cover the Flywoo Firefly nano baby 1s for us please?

The Babytooth boards are out of stock, and I’m interested in building this. Is there a ELRS based AIO that could run this? The BetaFPV AIO w/ELRS for example, or is there a better choice?

Has anyone tried the Savage Bee on 2S. I also wonder how the range is with the one that has the TBS built-in receiver.

Verry nice showing of capabillity s ,even a beginner see s the differend 👍👏

@joshua bardwell are you going to keep the babytooth as a fun park flyer?

you're gonna love the moblite7 and 6

30 likes 7 views, damn joshua is on another level

Be mindful of the issues in the early days of putting XT30's on these AIO's. A lot had flaky 5v regs and would blow from the higher current spike coming down the line unless you add a capacitor too. (Not saying the newbeedrone board is flaky but it's something to be mindful of)

I love 1s quads. I have a red shifters ion and it's super fun

I already purchased the CRSF NBD with intent to drop them 18650 vape batteries on it for crousin and them fat 1s Lipo HV for acro training

Hey Joshua! When r u making the tinyhawk freestyle 2 review?

Is there a 2022 version of this 1S baby tooth? or is it still holding its place as the best 1S drone?

Kabab invested so many hours of workload in this project, I can't wait to get all the components from FPVCycle and build it exactly as he said!

Can the camera and reception be upgraded on the SavageBee? I'm an airplane guy that is multirotor curious and knows nothing.

18:36 the dog 😭😭😭

I am absolutely love 1s quads. Most that can be flown on 1or 2s, I get more enjoyment flying with 1s.

Flew the savagebee but I preferred the way a 2S 2inch quad flys.( Emax TH race) It feels a bit more flingable if that a word, it flys more like my racing drones. I don't need that extra token a 3inch has as a 2inch can do 50mph anyways and is plenty for tight prox flying.

Look’s fun to fly !

The savagebee doesn't make much sense IMO. It needs the xt30 upgrade, but if you do that then the quad has entered the speed/power class where the built-in SPI receiver is not good enough. Then once you've done those upgrades, both the camera and VTX need to be upgraded too (a camera that blurry is only passable on a cheap 65mm whoop IMO). But at that point it's a completely different quad, so why buy the savagebee?

Absolutely 💯💯💯💯💯

Josh add soilder to your pins fill them up with soilder and you won't get half the sag brother!! Happy flying!!

For the record if anyone was curious I have a 1s 3" preset in emuflight that works for both of these quads, check it out ya'll

Hi Joshua, unrelated question, you know the lumenier lux f7 ultimate that you made videos about a while back? I got a couple of those flight controllers. I tried to use it with 6s. It was working fine when I tested in on 4s, but as soon as I put 6s on it, everything went crazy with the motors spinning randomly and the fc sending vbat down the video wire killing my vtx and camera. I worked out it was the fc, so wired up a second one off the 10v regulator on a hobbywing xrotor 60a esc and hmm putting a tramp hv vtx through vbat and a camera through the vtx. It worked okay for a month, but then the fc broke in a similar fashion while I was flying it, destroying an arm and the camera. What's wrong with the fc? Is it just a bad batch or am does it have to be wired differently for 4s? Is there anyway I can repair the FC? It is unresponsive in betaflight and doesn't light up at all. Thanks. (Also thanks for making videos, I probably wouldn't be flying now if one of your videos didn't help me to troubleshoot my first rtf quad.)

Can we put elrs on it?

great video and good info but the my Like went to Mamba!

Finally, I learned something..

Joshua, would you please give your general impression of the following: Which drone is quietest ( regardless of performance ) the TinyHawk 1s or the Babytooth 1s ?

Ladies & Gents, this is the future of our hobby, after the new restrictions kick in. I have followed KababFPV's R&D on toothpicks for so long that I decided to build one myself. I am in such charm with this class/type of drone, with it's low cost, flying capabilities&overall performance, low inertia in crashes, neighbour friendlyness, that I am probably not going back to 5 inches anymore. After having a horrible fire on my last 6S high end rig which nearly set everything to smoke, I left the field with frustration & sorrow... After scratching my head in which direction to go with the power source 1S? 2S? or 3S? I have decided to go bonkers and grab the 3S Packs & low KV motors, because it is always safer to go with low KV and from then jump to lower voltage if needed. The High KV + high voltage + throttle cap way is a NO GO! DON'T DO IT! IT ONLY LOOKS TEMPTING, BUT YOU RISK BLOWING YOUR ESC'S, OR SMOKING YOUR MOTORS!!! This happend to me 3 times - 2 burned ESC's + almost one whole quad incl. 6S battery. Then suddenly a kindly Brushless Motors Engineer messaged me explaining the whole phenomenon/bad influence of a High KV + High Voltage + Throttle cap combo for nearly 3 hours and opened my eyes for good... This is a terrible decision! Trust me, don't do it - be smarter than me and other who smoked their quads due to it! Maybe someone will make a video about it in the near future, I myself don't feel the confidence in my knowledge to pass the lesson over to the community, an Engineer should step out and warn everybody, in the meantime please keep your hands off it... Coming back to the toothpicks - I just want to thank you KababFPV for your tremendous work you have put into popularising this class of drones and giving hope to everybody into the future of our hobby (I didn't write "invented" :p). Let's face it, people have proofed it can be possible to build an AUW sub 250g 5inch, you can make it AOKFLY, but the first obstacle you crash into on high speed will decide if it has any sense... My guess is - probably not... Maybe it won't be a dying breed like X-Class but the old 5inchers will probably be put to the side and get overshadowed by the new kids on the block - the 3" youngbloods :)

Whould you comparing to happymodel crux3?