No video :(

Burnishing - Strive for the Best Surface Before You Apply Finish.

Подписаться 210 тыс.

Просмотров 8 тыс.

50% 1

WW'n Tips-n-Tricks #100 - Burnishing
Pro's take surface prep to the next level by burnishing. Today we discuss the concept and how to accomplish it via various methods across multiple woodworking disciplines.
----------------------------------------------------------
Bonus:
Japanese Architecture [ Wisdom of our Ancestors ] - / @kobayashi-kenko
----------------------------------------------------------
Associates Link of other items such as Tool, Book, etc.... I already own/use in woodworking craft that are available on Amazon - www.amazon.com...
----------------------------------------------------------
This channel is based on the value for value proposition. We depend upon patrons like you to subsidize our efforts. The time away from the 'real work' that pays bills and opportunity loss of time with family are our biggest expenses.
So if you feel these videos and series are of value to you and others please consider shopping and patronizing these sites:
- wortheffort.com
- / wortheffort
- squareup.com/m... (also for Donations)
- paypal.me/wort... for PayPal donations
- Venmo: @wortheffort venmo.com/code...
- / wortheffort_ww
- / wortheffort_sg

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@davidhrutfiord2537 9 месяцев назад

Think of the cellulose wall structures of the cells as a bunch of rooms in a building. When you cut them off you end up with shiny floors and cut off walls. Burnishing wipes out the half cut walls, leaving only the flat floors. You might find that grain orientation maks a difference when there are no flat floors. Hope I didn't loose you there.

@MrPod15 9 месяцев назад

I used shavings and sawdust to burnish when an apprentice! Now I have a little more experience and expertise (40+years) I use my cherished burnishing bars and rods. Depending on the species and grain I use either Mahogany, Oak, Beech or Ebony. I would recommend not burnishing before staining or colouring as closed pores prevent any depth to your finish. I recommend a therapeutic practice to decide on the finish required before staining shellacking varnishing or French polish. Enjoy your your new skill.

@michaeldoto4673 9 месяцев назад

I think we need to divide this into two categories: burnishing and polishing. Polishing uses an abrasive compound ranging in grit size sizes from course to extremely fine. The finer the grit, the higher the reflective properties thus giving it a shine or polished appearance. Burnishing accomplishes the same end goal, but does not use an abrasive. Rather, burnishing compresses the surface fibers with a material equal to or harder than material to be burnished. This is why bone, stone, steel, or wood fibers (brown paper) all work to burnish wood. As the surface is continuously compressed, it’s reducing surface scratches and imperfections until it reaches a point where it’s surface takes on a reflective appearance. I think this is why the terms polishing and burnishing have become synonymous-they achieve the same end result (within reason) although by different methods. I hope this makes sense.

@SnakeAndTurtleQigong 8 месяцев назад

Thanks very much

@danieltomasjr.5871 9 месяцев назад

Thank you for the master class in every video you always give us. You are a master and I follow every lesson. Thank you sir.

@RavensViewStudio 9 месяцев назад

Good vid mate. I always use brown paper before I add a finish... but, I also use it to burnish up after using an oil. Adds to the shine quite nicely. Jay

@CNKXU1 9 месяцев назад

Pecancrete. Love it. Always great to see the different timbers you have available as it is just not econimical in Australia to use anything but local timber. But the techniques are universal. Thanks for the tips.

@vincenthunter465 9 месяцев назад

Always learn something from you. You're a good teacher. Thanks, Shawn.

@thomashverring9484 7 месяцев назад

Great video! Thanks, Shawn :^)

@dpmeyer4867 9 месяцев назад

thanks, good info

@greggerstner5599 9 месяцев назад

Picked up this tip from a spoon carving vid as well. A British woman carver in my case -- perhaps she learned from your source. In addition to polished stone, I've tried bone, antler, shavings, paper, and a small-ring chain mail pot scrubber. Works beautifully and these methods put a wonderful tactile finish that you couldn't get with micromesh. A customer showed me a red cedar spatula thing that he'd carved decades ago. Not much to look at, but the texture! -- decades of daily handling and at the time I knew that I could never achieve that feel with sandpaper. Burnishing comes very close. Trying to sand less and less. Hate sanding. And now you should invent a power burnisher for big flatwork projects. Awesome video, and good on you for putting out yet another game-changer.

@orellinvvardengra6775 9 месяцев назад

I know you said your mic didn’t pick up the sound all to well but I could hear the difference when you were rubbing your finger across. This was a nice video, thanks for the information!

@loucinci3922 9 месяцев назад

Enjoyed the video. Thanks for sharing

@user-ec4vv3iq9k 27 дней назад

Fine sandpaper works well also

@wortheffort 27 дней назад

Boat same, see video.

@johnnyb95678 9 месяцев назад

As always, I really appreciate you sharing your knowledge and experience. Thank you for sharing!

@puddinggeek4623 9 месяцев назад

Excellent video as always. I have used the brown paper truck for a while, ever since I saw Steve Ramsay WWMM do it. Keep up the great work.

@soofihasan 9 месяцев назад

Thank you sir, you teach me the most interesting ideas and amazing tips. Thank you and God bless

@AffordBindEquipment 9 месяцев назад

White Scotch Brite (1000 grit) does the same thing. Or start with light grey (800 grit) and then white. Changed my turning finishing completely. Sandpaper just wasn't getting gloss enough.

@changefortanzania 5 месяцев назад

I have put a few wood chips on the white scotch.Bright pad on my wood turning and use it to burnish it very well. Then my last step is to use the scotch.Bright pad with no wood chips. Then I finish it with ob.Shine juice and final step is hard wax and then polished. Best finish I've ever gotten. And it only takes a few minutes. On my wood turned items.

@garyfoster3076 9 месяцев назад

You are the MAN. Nice job❤

@markduggan3451 9 месяцев назад

Great video, with lots of information.

@OregonOldTimerWOODTURNING 9 месяцев назад

Thanks for this. I'll be trying it today.

@Exodus5K 9 месяцев назад

If you're going to burnish large flat furniture parts, why not try using a straw burnisher (otherwise known as a French Polissoir)? Although I would be interested to know if it impacts the ability of the wood to absorb oil finish.

@gregshoopman9170 9 месяцев назад

Thanks Shawn

@1Dataware123 9 месяцев назад

Great Video. Thanx!

@ernestoalonso9932 9 месяцев назад

Very interesting and mind opening. I knew about this, but I always thought it would affect the amount of finishing the wood would absorb. Great explanation as always. Thank you, Shawn!

@sixsigma1000 9 месяцев назад

Just luv your films/vids❤

@etcher6841 9 месяцев назад

Thanks mate!

@HansWurst12345 9 месяцев назад

for non porous wood like beech, burnishing with fine steel wool is the best ive yet found. Result feels almost like injection molded plastic

@medic472 9 месяцев назад

Thanks for the tip. I usually water pop in the final stages of sanding. I wish I was good enough at the lathe to go right to finish. I'll try burnishing to see if that gives me the results I'm looking for.

@msifert 9 месяцев назад

It's like in working with concrete on floors you can , power trowel it , and it becomes harder. If you "hard trowel it", 3 times longer than power troweling, it starts to turn black and shiny, this makes it slippery when wet and brittle on the surface. This surface is nice in a woodworking area because it's easy to sweep up dust from.

@williamno.1450 9 месяцев назад

For spoon carving, you can use anything hard, such as the back of the knife you were carving with, I have used antler/bone, or some sort of ceramic.

@yotamgosh 9 месяцев назад

I know that traditional clay pottery uses smooth stones (especially very hard ones) to burnish the clay pots before firing them Also, is the spoon carving burnishing you mentioned a video? Is there a link?

@skipjames8437 9 месяцев назад

I'd say burnishing (& sanding) is pretty much done by ear (& feel). You only look at it to see where to put your hands, ( & to admire your work when you're done).

@qapla 9 месяцев назад

Burnishing can make a vast difference on a lathe ... try using #0000 or finer steel wool (they do make #000000) followed by paper - doesn't have to be a brown paper bag, newspaper of copier paper also work (newspaper should be used without the print unless a little ink transfer doesn't impact your project)

@williamno.1450 9 месяцев назад

Burnishing is compressing and laying down the severed wood fibers.

@skipjames8437 9 месяцев назад

Like what you do to a corner miter.

@meriscz 9 месяцев назад

What Hello, then what is the difference after applying oil for example? I don't know if I can compare, but for a "smooth" surface, I learned to spray the wood with water (sometimes isopropyl alcohol) and then run a few times in all directions with 400 sandpaper. The liquid "builds" the fibers, which the tool did not "cut", but pushed into the product. In the end, it will probably be the same principle as in the video.

@wortheffort 9 месяцев назад

That works if you abrade (sand).

@meriscz 9 месяцев назад

@@wortheffort I did not realize that. My fault.

@executive 9 месяцев назад

it makes me wonder though, if burnishing lays the fibres down, does applying a finish (eg. oil) are they just going to stand back up again

@wortheffort 9 месяцев назад

Burnishing isn't really laying fibers down. Which is why I demonstrated on sliced wood not sanded (abraded).

@calebkirkbride8439 9 месяцев назад

Answer to question at 5 minute mark: you're filing in the pores of the wood with its own shavings so they are more stable and less likely to be crushed.

@ianpearse4480 9 месяцев назад

Have you ever tried Agate? I have used it to burnish gold leaf, now I am wondering about wood prep.

@wortheffort 9 месяцев назад

Nope. Do it and tell us.

@bryanlloyd6024 7 месяцев назад

Is burnishing meant to be a replacement for sanding or something you do before sanding?

@changefortanzania 5 месяцев назад

It is something I do after sanding to 800 or 1000 grit sandpaper.

@mypony891 9 месяцев назад

So if you put a stain or oil on the project should you still burnish afterwards?

@wortheffort 9 месяцев назад

burnish before finish. its prep work.

@DonsWoodies 9 месяцев назад

I recently purchased a Polissoir to burnish wood panels. It's a pretty time consuming process. I wonder if it has the same effect as you mention about not affecting the oil absorption since it puts a lot of localized pressure on the wood? I've also heard about but not tried using a piece of deer antler as a burnisher.

@wortheffort 9 месяцев назад

Polissoir does same thing.

@fionam3554 9 месяцев назад

I think you are compressing the grain a bit. Patting it down like cement with a trowel, not cutting or hammering? Before baseball bats were as machined (and expensive) as today, players used to rub a bone along the grain to harden the bat. Usually a cow femur or the like.

@wortheffort 9 месяцев назад

didn't know that about bone.

@dranob 9 месяцев назад

Love this vid (as I do a lot of your others) - always something to learn. Speaking of learning - I don't know if you have an opinion on this topic, but now that I've dipped toe in the woodworking world, I see a lot of ads coming to me for subscriptions to industry sites/magazines. $1.29 for a year! Education, videos! Are any of them 'worth the effort'? I know it's only a couple bucks, but as a hobbyist I only have so much time to go down the rabbit hole and want that time to be well-spent. Are any of these memberships of value, or are they just money grabs and could be teaching me things 'wrong' that I'll have to unlearn? Would love your opinion. Thanks again for the great video - keep them up!

@wortheffort 9 месяцев назад

I don’t know what those are.

@michaelnorman5640 9 месяцев назад

I joined the woodworker guild of America if that’s what you are talking about scam almost everything there is already on RU-vid for free he just condensed everything down to about 40 pages you can choose from videos that when you have a question or I seen many others say videos were incomplete with the plans as well I would go with a HARD PASS they are hoping you don’t cancel so they can hit you with the premium charge! Go luck my friend and just find a builder with plans buy and follow you will do fine!

@jimhyslop 9 месяцев назад

Is burnishing instead of, or in addition to, the oil/poly/wax/etc. finish?

@marcusrobinson1778 9 месяцев назад

In addition to oil/wax. Poly isn't really needed

@patmash 9 месяцев назад

I use a paper bag crumbled up to burnish.

@arthurbrands6935 9 месяцев назад

Roy Hobbs burnished his torrified ash bat with bone.

@marcusrobinson1778 9 месяцев назад

I believe it bends over the fibers. Imagine you had grass if you laid a sheet if plywood on it for a day then moved it it would be all bent over and laid down. Pottery uses burnishing too and it packs the crystals tighter on edge grain you are smashing them flatter. Grain is the flowem and phyllum of the vascular plant with lignin and cellulose.

@wortheffort 9 месяцев назад

that would be the case if it was abraded (sanded) but not when sliced.

@marcusrobinson1778 9 месяцев назад

@@wortheffort I'm confused. Burnishing isn't slicing. It's essentially 0 grit sanding. I have access to a scanning electron microscope at my university if you want me to take a look

@marcusrobinson1778 9 месяцев назад

@@wortheffort also sorry if my comment was confusing. I got half way through it before doing something else and had to put it down then posted it half complete when I came back. I didn't proof read etc.