Тёмный

CADILLAC BREMBO BRAKE SWAP FOR YOUR SUBARU WRX ON THE CHEAP- HOW TO INSTALL PT-06 

Blake's Garage
Подписаться 91 тыс.
Просмотров 163 тыс.
50% 1

What's up guys in this video I show you how to install the Cadillac ATS 4 Pot Brembo Brakes on your Subaru for as little as $600 bucks!
Pick up your Blake's Garage T-Shirts here:
blakesgarage.bigcartel.com
Subaru and Scion 4 Piston ATS Caliper Big Brake Bracket Kit
This big brake bracket kit allows you to install 2015 Cadillac ATS 4 piston Brembo calipers onto the front of your Subaru BRZ, Scion FR-S, Subaru WRX, Subaru Forester, and many other similar Subaru models using a 5x100 bolt pattern 326mm (12.8") 2004 STI rotor.
If you have a 2015+ WRX you will need 2005 5x114.3 STI rotors
This kit requires-
Both front 2013-2015 ATS Brembo calipers
2004-2007 Cadillac CTS-V brake pads
2004-2007 Cadillac CTS-V Caliper pin kit
2004 STI 5x100 front rotors
This will work on Subaru's including pre-2015 WRX's, Legacy's, Foresters, Outbacks, Impreza's, and any other Subaru that you are able to swap factory STI Brembo's onto.
Below are all the parts with links you need for the Install of you BBK:
ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly geni.us/7OEiC3 [Amazon]
ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly geni.us/tyE6BT3 [Amazon]
Centric 950.47507 Brake Line Kit geni.us/XgFl9y [Amazon]
950.47006 Stoptech Stainless Steel Braided Brake Line Front geni.us/hjRFG [Amazon]
Stop Tech 950.47507 Stainless Steel Brake Lines Rear geni.us/Q6fQd [Amazon]
ATE 706202 Original TYP 200 DOT 4 Brake Fluid - 1 Liter geni.us/5QAL [Amazon]
StopTech 125.47019 2004 Subaru STI 5x100 12.8” rotors Premium Brake Rotor geni.us/6VRujC [Amazon]
ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit geni.us/JEezs [Amazon]
Total Cost for Brand New Brembo’s with Race Pads and steel braided lines front and rear $860.59
If you want drilled and slotted Rotors 2004 Subaru STI 5x100 12.8” rotors
StopTech (127.47019L) Drilled and Slotted 5x100mm Brake Rotor geni.us/G10M [Amazon] $121.97
StopTech (127.47019R) Drilled and Slotted 5x100mm Brake Rotor geni.us/DTUBA [Amazon] $121.97
www.ctsvbrakeswap.com mounts $220.00
Milwaukee 48-89-2740 9/16-Inch Thunderbolt Black Oxide Drill Bit geni.us/cBAis [Amazon]
Muteki 32905B SR Series Black 12mm x 1.25mm SR48 Open End Lug Nut Set geni.us/wXNy [Amazon]
ARP 1007716 Wheel Stud Kit for Subaru geni.us/v6zw [Amazon]
2004-2007 CADILLAC CTS V Hawk HPS Front Brake Pads geni.us/9g9VIIs [Amazon]
Cheapest Setup
StopTech 125.47019 Premium Brake Rotor geni.us/6VRujC [Amazon] $70.39 + $12.99 Shipping X 2 = 166.76
ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly geni.us/ecGMA [Amazon] $86.06
ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly geni.us/D1eNO0M [Amazon] $81.17
ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit geni.us/JEezs [Amazon] $17.51
ACDelco 17D1050M Professional Semi-Metallic Front Disc Brake Pad Set geni.us/BMUTl0 [Amazon] $34.69
www.ctsvbrakeswap.com/subaru-k... $220.00
Total Cost for Brand New Brembo’s 606.19
Camera Gear I use:
Canon 70D geni.us/0PwNR [Amazon]
Canon 17-40mm F/4 Lens geni.us/nN8f7vs [Amazon]
Rode Video Mic Go geni.us/PzaQOv [Amazon]
GoPro Hero 3 Black geni.us/xLKq0E [Amazon]
Manfrotto 502 video head here geni.us/Be7l [Amazon]
Rode Video Mic Go geni.us/PzaQOv [Amazon]
Zoom H1 Handy Portable Digital Recorder geni.us/bISj [Amazon]
Lapel Mic HUACAM YYPJ-01-1 geni.us/hJHwM [Amazon]
ProMaster XC525 Red Tripod With Head geni.us/BGBEpp [Amazon]
Channel Art by Synq DZN Check out his Channel
/ improvings
plus.google.com/+AkzMC/

Авто/Мото

Опубликовано:

 

29 май 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 611   
@aaronmcfarlane2701
@aaronmcfarlane2701 8 лет назад
Gained another sub here, man! I hope you blow up! Your demeanor, content and especially quality of video are fantastic! So I have got to know, what camera did you use to shoot this video? Cheers!
@BlakesGarage
@BlakesGarage 8 лет назад
+Aaron McFarlane thanks man really appreciate it. It's a canon 70d check my video description It has all the gear I use with Amazon links.
@williammoffatt946
@williammoffatt946 6 лет назад
When you said blow up in your comment I thought you were referring to his ej at first... I think that makes me a bit of a subie guy haha!
@eddietalon7006
@eddietalon7006 3 года назад
i know I'm kind of off topic but does anybody know a good website to watch new series online ?
@enriquecharles6826
@enriquecharles6826 3 года назад
@Eddie Talon I dunno I watch on flixportal. You can find it through google :P -enrique
@royalonyx2919
@royalonyx2919 3 года назад
@Enrique Charles Definitely, been using Flixportal for since march myself :D
@SarahnTuned
@SarahnTuned 8 лет назад
I love the acid green brembo logo!
@Flat4CrewCT
@Flat4CrewCT 8 лет назад
Dude this is so awesome thanks for making this video! Screw the sti brembo swap its so expensive. Just subbed to the channel keep it up bro!
@jonkat323
@jonkat323 8 лет назад
Been looking forward to this episode, so sick!
@EvoRuben
@EvoRuben 6 лет назад
I’m supporting this guy forsure man his videos are super helpful. Thank you
@traviishunter
@traviishunter 8 лет назад
I've been watching your videos for quite some time now and I still can't figure out why your channel hasn't blown up yet! all your videos are good and really informative..anyway I look forward to the review and if they turn out to be decent it looks like that's my next upgrade for my forester.
@BlakesGarage
@BlakesGarage 8 лет назад
+Travis Anderson thanks Travis make sure to share the video to help my channel grow.
@kevingoudswaard3322
@kevingoudswaard3322 8 лет назад
really diggin these vids bud. I feel like Im right there with ya. Thanks for the detail and step by step instructions. I'm looking at a new STI in a few months, and its nice to know I can do this stuff myself!
@BlakesGarage
@BlakesGarage 8 лет назад
Hell yeah that's exactly what I make these video's for glad I can help.
@KevinEdgar
@KevinEdgar 6 лет назад
Kind sir, you speak very clear and don't say uhm every other word. Thank you for that! Also, very nicely detailed and quality video. RU-vid needs more tutorials like this.
@smurik1
@smurik1 4 года назад
You’re just a crazy guy with knowledge in upgrading your subi. Very informative video. Thanks a lot
@kyberman9840
@kyberman9840 7 лет назад
Very informative video man. I will be follow your steps when i swap my brakes in the future!
@husky701rider9
@husky701rider9 7 лет назад
Just found your channel and just bought my first project car. It's a bugeye thanks for the tips you earned a subscriber
@BlakesGarage
@BlakesGarage 7 лет назад
+Ian Jacob no prob glad you like the channel.
@WhiteWingSTI
@WhiteWingSTI 8 лет назад
Good job on the install. That looks great and I'm sure it's world of improvement with your braking department!
@TheJuanesjr0911
@TheJuanesjr0911 5 лет назад
I don’t usually subscribe to any channel but this video has been extraordinarily helpful to me and I like what you are doing so I’m subscribed... thank you for all the detailed work and the amazing video quality. Would be awesome to see you post links for the 15+ rotors but they can be found. Thank you again
@davidmudrik6539
@davidmudrik6539 8 лет назад
Nice video! That's such a killer setup for the money
@jprince3
@jprince3 8 лет назад
congrads on 10k! love the vids! keep up the great work!
@dlroto
@dlroto 8 лет назад
Very nice vid Blake, I can't wait to hear a review on them.
@etnies88
@etnies88 8 лет назад
Props for all the information provided and links! I already have brembo's but I watched the video anyway.
@evan22996
@evan22996 8 лет назад
Congrats on 10k Blake! Great video as always dude
@BlakesGarage
@BlakesGarage 8 лет назад
+Evan L. Thanks Evan!
@javierruiz7992
@javierruiz7992 8 лет назад
best subaru channel...hands down
@robertb105
@robertb105 7 лет назад
Sir, thank you. Video helped out a whole lot. my stopping power is incredible compared to my stock.
@BlakesGarage
@BlakesGarage 7 лет назад
Subaru Love glad I could help out!
@DAVIDFLEET11
@DAVIDFLEET11 7 лет назад
This was an awesome video. I'm probably gonna do the same on my '03 WRX. thanks for the DIY
@mholdr
@mholdr 8 лет назад
outstanding job on the video and links Blake - thanks!
@MattGreenland
@MattGreenland 8 лет назад
A few misconceptions: -Keep the shields, they will protect the rubber joints from the heat of the brakes. The heat will kill the joints from the racetrack. -Rubber lines don't deflect remotely close enough to notice. Regular braided lines also have to be replaced every 2 years. -XP8 pads are not enough for the heat this car is going to generate on the racetrack, XP10 at the least, XP12 recommended with that horsepower and weight. -Don't use race pads if you are scared of brake noises -Only use steel nuts for the wheel -Lastly, stickers don't matter, it's a performance part, not stance nation rice club.
@92BGLancer
@92BGLancer 8 лет назад
you forgot to mention the front bias the car will now have affecting it's performance at the track. It's good to have good front brakes but when you neglect the rears and the fronts are doing all the work you're basically hurting your track times especially on turns when the nose will dive forward every time you brake.
@92BGLancer
@92BGLancer 8 лет назад
you forgot to mention the front bias the car will now have affecting it's performance at the track. It's good to have good front brakes but when you neglect the rears and the fronts are doing all the work you're basically hurting your track times especially on turns when the nose will dive forward every time you brake.
@92BGLancer
@92BGLancer 8 лет назад
you forgot to mention the front bias the car will now have affecting it's performance at the track. It's good to have good front brakes but when you neglect the rears and the fronts are doing all the work you're basically hurting your track times especially on turns when the nose will dive forward every time you brake.
@shadowdemon7770
@shadowdemon7770 7 лет назад
Matt Greenland he doesn't respond to comments.
@rfe1008
@rfe1008 8 лет назад
badass video brotha, super sick setup!!
@boostedbuiltgarage
@boostedbuiltgarage 8 лет назад
Man that's a cool conversion! They look the same as Evo Brembo's. Sweet video
@wrxFTWdey
@wrxFTWdey 7 лет назад
i pretty much hate all car channels other than mcm lol, but i dig this one. has some good info and what not. Probably end up doing this brake swap on my car in the near future.
@shamous180
@shamous180 7 лет назад
yet another project I get to figure out if I can make it work on my OBXT... dam you lol... great work.. subscribed
@Jocktech
@Jocktech 8 лет назад
love watching the beard grow as the channel does
@christopherroldan7992
@christopherroldan7992 8 лет назад
Great video man can't wait to do this, better than spending 800-1000 on STI brembos
@BlakesGarage
@BlakesGarage 8 лет назад
+Christopher Roldan thanks!
@morepsi1651
@morepsi1651 8 лет назад
Great video! Are you going to post a review of how good or bad they actually perform? Very curious to see how you like them because you drive your car hard.
@catzbunn
@catzbunn 8 лет назад
Great video Blake! Congrats on 10k
@BlakesGarage
@BlakesGarage 8 лет назад
Thanks, Clint!
@m.r.freeze974
@m.r.freeze974 8 лет назад
Awesome video! I wish I knew this a year ago when I had to change out my rotors... StopTech slotted and drilled sport rotors don't even compare the a big brake kit and calipers...
@natural146
@natural146 7 лет назад
This video is very pragmatic I love it, thanks bro. Question can this be done to my 98 legacy outback Gt 2.5?
@jacobmeyer9766
@jacobmeyer9766 7 лет назад
Removing important shields, not oiling the tap. Good stuff.
@killeminati173
@killeminati173 Год назад
Thanks for the video!! Just picked up the whole kit from a dude that was selling it so now I just have to buy the break rotors
@BlakesGarage
@BlakesGarage Год назад
Sick
@maddoxinc1642
@maddoxinc1642 8 лет назад
I subbed because of the beard. A real man's accessory. Also, the brakes are beast.
@BlakesGarage
@BlakesGarage 8 лет назад
+MaddoxInc haha thanks for the sub man.
@SpencerHogg
@SpencerHogg 8 лет назад
Damn dude!! This was a fantastic video, very well done - excellent DIY / instructions. I mean, I don't think I can do this on my 2016 wrx hahaha but I still watched and can respect the efforts and work you did bro awesome!! PS; The turbo snail beard tee is f*cking epic hahaha!!
@BlakesGarage
@BlakesGarage 8 лет назад
+NinjaxBart Thanks Dude. It will work on the 16 WRX you just need 5x114.3 rotors. I glad your digging the T-Shirt.
@ArtofFrugality
@ArtofFrugality 8 лет назад
Can't wait for the test drive! I'm definitely nervous to bore and tap those holes for the mounting bracket.
@BlakesGarage
@BlakesGarage 8 лет назад
+Code3WRX it really is a lot easier than it seems.
@jaysfasttoys
@jaysfasttoys 3 года назад
Excellent video brotha, nice work! Definitely smashed that subscribe button for you!
@BlakesGarage
@BlakesGarage 3 года назад
Thanks
@bienmendoza
@bienmendoza 8 лет назад
dude props with the best angles you can possible do and recording it!
@BlakesGarage
@BlakesGarage 8 лет назад
+bien mendoza Thanks Bien glad you liked all the angles.
@sethwright
@sethwright 4 года назад
Awesome video man!
@AdventuresWithLogan843
@AdventuresWithLogan843 8 лет назад
i love this brake upgread! i wanted to do it on my 240, but it wasn't 5 lug!
@BlakesGarage
@BlakesGarage 8 лет назад
I know I love it already. The CTS-V 6 pots on the 240 are SO DOPE!!
@Candyman1314520
@Candyman1314520 8 лет назад
Great tutorial bro. The channel has come far, keep on at it. Btw beard on point now only if I can grow a full bread that would be mint.
@BlakesGarage
@BlakesGarage 8 лет назад
Thanks Benny!
@afshinfarahbakhsh3773
@afshinfarahbakhsh3773 8 лет назад
Great video! I didn't know this was possible.
@notorioussouljur
@notorioussouljur 8 лет назад
this is pretty dope thanks for sharing it
@ifnotyouheartwhoelse
@ifnotyouheartwhoelse 8 лет назад
Looking sick. Can't wait to see the stock wheels over them.
@BlakesGarage
@BlakesGarage 8 лет назад
+Benton Plunkett I have a quick clip on that. I will post it in a few days.
@RandomAdamFun
@RandomAdamFun 4 года назад
Thanks, found this helpful. Did you notice wearing on the pad a little off? Like they were sitting slightly above the edge of the rotor?
@englishman805
@englishman805 7 лет назад
i did the swap, all works great. I noticed my pads to overlap the top of the rotors by about 2mm. is this something you also found?
@antdo
@antdo 8 лет назад
10k!!!!! Congrats
@BlakesGarage
@BlakesGarage 8 лет назад
+Do Boy's Garage Thanks Man!
@TWRX_Chuck
@TWRX_Chuck 8 лет назад
Congrats on 10k dude! So sweeeeet! This is an epic mod I totally would gave done this if I hadn't of upgraded to the sti!
@BlakesGarage
@BlakesGarage 8 лет назад
I know right the stock brakes are poo poo!
@5riddikk
@5riddikk 8 лет назад
great vid bro
@merrekl9890
@merrekl9890 8 лет назад
Nice install ! will you put a video on about bleeding your brakes ?
@terraformingcats8175
@terraformingcats8175 8 лет назад
Hey, Blake! Great job on the video man! I have a 2016 WRX and am wanting to do this eventually. Are you planning to do a rear brake upgrade video?
@BlakesGarage
@BlakesGarage 8 лет назад
Yes I will eventually. Trying this out for now to see what I think. I'm really liking the upgrade so far.
@Jolinator
@Jolinator 8 лет назад
Nice this just popped up in my sub box and has 200+views already! also you can use some saran wrap over your lug nuts before sliding your socket on that will stop them from getting skuffed up if your undoing your wheel nuts all the time for mods and track days if your socket is a super tight fit it wont work but thats what i use on my snapon sockets and no marks so far :) the painting you did on those calipers looks fricking mint. hehe look at that lovely new steering rack and tie rods:P your only 16 subs off 10k man! all the best!
@BlakesGarage
@BlakesGarage 8 лет назад
+Jolinator Dude awesome idea! I will use that for sure! Thanks.
@jordanrumsey1493
@jordanrumsey1493 6 лет назад
Thats a good tip, im goign to try that- thanks!
@jerrylee3887
@jerrylee3887 7 лет назад
This guy is awesome!
@CL_Audio_Tuning
@CL_Audio_Tuning 5 лет назад
This is Bloody Awesome!!!!
@StrykerWolf92
@StrykerWolf92 7 лет назад
Should make a video showing how to bleed the brembo's, since they have dual bleeders unlike the stock calipers.
@krishangovin9054
@krishangovin9054 8 лет назад
I haven't watched the video yet, but I know it's going to look fresh!
@BlakesGarage
@BlakesGarage 8 лет назад
+Krishan Govin thanks Krishan they do look awesome!
@TheMMAlife
@TheMMAlife 8 лет назад
those are some awesome tools man!! luv the different colors lol
@TickleFingers
@TickleFingers 8 лет назад
Those are NOT awesome tools..... Those are harbor freight junkers. Don't ever mistake cool appearance for quality like SnapOn or Mac tools.
@BlakesGarage
@BlakesGarage 8 лет назад
I'm pretty sure that was a joke. They work fine I have a bunch of Mac tools in SAE but not metric. These work fine. You can beat on them and you don't have to care because they are super cheap to replace.
@ChosenOne247
@ChosenOne247 8 лет назад
Awesome video mate! Do you know if these would fit Rota Grid R 18x9.5+38?
@slobson
@slobson 7 лет назад
Great vid Blake, keep up the good work. Have you experienced any pad knockback with the new brembos?
@BlakesGarage
@BlakesGarage 7 лет назад
+slobson No I haven't noticed anything.
@AidanTree
@AidanTree 8 лет назад
You seem to have a lot of knowledge! Love these videos man!
@BlakesGarage
@BlakesGarage 8 лет назад
+JellyFishJuices Thanks dude!
@Shiftaholics
@Shiftaholics 5 лет назад
I love the vid but I wonder will it fit my subaru SH 2012? I know a lot of impreza parts fit but I want to be sure before making the investment.
@alpinewhite46
@alpinewhite46 8 лет назад
Good stuff man
@brianlau8316
@brianlau8316 8 лет назад
AWESOME i want to do this sooooo bad . !!!
@fups1
@fups1 4 года назад
Great video! is there a way to get these in the rear also?
@ThemePark-a-gogo
@ThemePark-a-gogo 8 лет назад
I know this video has been out for a little while and I love your series. Great info and fun. I'm planning on doing this myself with my '16 wrx but wonder if there is a difference between getting the brakes you used or if the "V" brakes are virtually the same thing or could they offer better performance? On the site it does say it's a "V" kit but I believe the ones you used are the standard CTS berm no brakes. I may be wrong...
@BlakesGarage
@BlakesGarage 8 лет назад
You need to use these calipers: ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly amzn.to/1SrwQI0 ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly amzn.to/1U460oz They do use the CTSV calipers for some of the other car brands that they make spacers for, But the Subaru kit requires these. Check the description for all the links to the parts needed.
@steveo8424
@steveo8424 7 лет назад
Do an update video please? Wondering about brake bias and how well the "torque vectoring" is working with these new brakes.
@hafizzudinrahman1174
@hafizzudinrahman1174 8 лет назад
Nice Video. May I know the measurement for The Caliper Bracket Between top and bottom. It 130mm or 140mm
@skaskank99
@skaskank99 7 лет назад
Out of curiosity, would you happen to have a measurement for the caliper mounting bolt spacing for the new caliper?
@GodxPoseidon
@GodxPoseidon 4 года назад
Would this modification fit a 2005 blob eye usdm wrx? And Do you think that this is better than a jdm caliper swap? I’m trying to get as much information about this modification. Thank you so much for the video !’
@eilonkelty3622
@eilonkelty3622 4 года назад
BROOOOO thank you so much!!
@spikemaul
@spikemaul 7 лет назад
Crush washer! Nice video!
@dejotachamo
@dejotachamo 4 года назад
you just made my day
@DirtyDocV
@DirtyDocV 7 лет назад
Bro absolutely astounding! I am going to do this shit to my 2016 WRX.
@BlakesGarage
@BlakesGarage 7 лет назад
+Michael Vereecke Do it you will love it. I have all of the links for the parts you need in the description.
@metallica78ivanaxel
@metallica78ivanaxel 4 года назад
20:06 kinda sounds like Ashton Kutcher, great video man!
@drewgunner14
@drewgunner14 8 лет назад
Wow. Awesome work man. I wanna do this to my 2017 wrx.
@BlakesGarage
@BlakesGarage 8 лет назад
+drewgunner14 You will love it! Such a good value for the increase in performance.
@drewgunner14
@drewgunner14 8 лет назад
+Blake's Garage question did you just put sticker over the cadillac logo and replaced it with the neon brembo?
@drewgunner14
@drewgunner14 8 лет назад
+Blake's Garage and now you mentioned performance, have you tested 0-60? Theres one dude here in youtube who only had about 3-4 ft difference from the stock.
@BlakesGarage
@BlakesGarage 8 лет назад
drewgunner14 Yes I painted the caliper black then put a Brembo sticker one that.
@Drifftpanda
@Drifftpanda 4 года назад
Hey man nice video , what size is the tap ?
@jonathantejada5838
@jonathantejada5838 8 лет назад
Did you make a follow up video on bedding in the breaks and if you gotting any squeeking after the install?
@jm6.6hd36
@jm6.6hd36 8 лет назад
nice vid thumbs up
@peterhatch1583
@peterhatch1583 2 года назад
Thks for video could you use the kit on a 240 volvo wagon thks
@mcgarvinmathurin4352
@mcgarvinmathurin4352 3 года назад
How would you compare these to the STI calipers? Also will this fit behind my 17” wheels?
@dlugsch
@dlugsch 3 года назад
Anyone know what size the spacers are that come in this kit?
@alexnguyen9826
@alexnguyen9826 6 лет назад
Hey Blake, is there any kit out there for the rear brakes as well?
@justinrey4770
@justinrey4770 8 лет назад
Will the ctsv rear brembo brakes fit perfectly as well?
@alichaudhry8382
@alichaudhry8382 8 лет назад
A lot easier than I thought. I really want to buy some
@BlakesGarage
@BlakesGarage 8 лет назад
+Ali Chaudhry DO IT!
@subie24gonzales94
@subie24gonzales94 8 лет назад
Good how to video
@pixels2polygonss
@pixels2polygonss 8 лет назад
dude that was awesome. nice work :D is this a brake swap only for the front ?
@BlakesGarage
@BlakesGarage 8 лет назад
Yeah just for the front for now.
@DaytonaRoadster
@DaytonaRoadster 2 года назад
yeaaaaaah i need to do this
@AFWeather
@AFWeather 7 лет назад
Great vid! I have all the parts to do this myself, but I am trying to find that T-Handle adapter for the threading bit. Where did you get the one you use?
@BlakesGarage
@BlakesGarage 7 лет назад
AFWeather I picked one up in a big tap and die set from Home Depot.
@hainiejl
@hainiejl 8 лет назад
do they have the rear calipers for the wrx too, and do these calipers clear the stock rims
@NelliesPCWorkshop
@NelliesPCWorkshop 6 лет назад
I would love to do this with my Hyundai Velsoter turbo... is it possible?
@prdrdave
@prdrdave 6 лет назад
Thank you
@BaiMoto24
@BaiMoto24 2 года назад
For that wheels set up, did you need wheel spacers to clear front brembo calipers?
@n155m0
@n155m0 7 лет назад
Has anyone try using the 2015 Z06 brembo brake on their WRX/STI just curious ,also will the same setup work and what wheel offset would be the best thanks
@christophergraham5891
@christophergraham5891 8 лет назад
nice job
@swabelife
@swabelife 7 лет назад
Great video! How did you and what did you use to paint the caliper? Thanks
@BlakesGarage
@BlakesGarage 7 лет назад
+Macke Aldana just used automotive brake calipers paint. I think it was VHT.
@jhoelt2922
@jhoelt2922 6 лет назад
Will this work on 09 subaru legacy 3.0r?
@bigbenms6
@bigbenms6 7 лет назад
how does this effect brake bias compared to stock?
@alanlee2195
@alanlee2195 7 лет назад
Sorry, one more question Blake. How are those Brembo decals holding up under the heat of braking? Where did you get them from again?
Далее
The Problem With These Headlights
17:55
Просмотров 874 тыс.
Лепим из пластилина🐍
00:59
Просмотров 131 тыс.
The Only Brake Pad You Should Buy
10:07
Просмотров 812 тыс.
UNBOXING SUBARU BREMBO SWAP ON THE CHEAP! PT-01
14:51
How to PROPERLY Paint Your Brake Calipers
14:26
Просмотров 2,3 млн
Bike trick and Bro's aura...
0:11
Просмотров 5 млн