Тёмный

UNBOXING SUBARU BREMBO SWAP ON THE CHEAP! PT-01 

Blake's Garage
Подписаться 91 тыс.
Просмотров 39 тыс.
50% 1

Subaru and Scion 4 Piston ATS Caliper Big Brake Bracket Kit
This big brake bracket kit allows you to install 2015 Cadillac ATS 4 piston Brembo calipers onto the front of your Subaru BRZ, Scion FR-S, Subaru WRX, Subaru Forester, and many other similar Subaru models using a 5x100 bolt pattern 326mm (12.8") 2004 STI rotor.
If you have a 2015+ WRX you will need 2005 5x114.3 STI rotors
This kit requires-
Both front 2013-2015 ATS Brembo calipers
2004-2007 Cadillac CTS-V brake pads
2004-2007 Cadillac CTS-V Caliper pin kit
2004 STI 5x100 front rotors
Please select the option below for which car you drive. "Other Subaru's" include pre-2015 WRX's, Legacy's, Foresters, Outbacks, Impreza's, and any other Subaru that you are able to swap factory STI Brembo's onto.
All the parts with links you need for the Install of you BBK
Centric 950.47507 Brake Line Kit amzn.to/1SpfdFP
950.47006 Stoptech Stainless Steel Braided Brake Line Front amzn.to/1Np3VT9
Stop Tech 950.47507 Stainless Steel Brake Lines Rear amzn.to/1Np46h6
ATE 706202 Original TYP 200 DOT 4 Brake Fluid - 1 Liter amzn.to/1SpfvMX
StopTech 125.47019 2004 Subaru STI 5x100 12.8” rotors Premium Brake Rotor amzn.to/1VzQhPb
ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly amzn.to/1SrwQI0
ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly amzn.to/1U460oz
ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit amzn.to/1Srx2qU
Total Cost for Brand New Brembo’s with Race Pads and steel braided lines front and rear $860.59
If you want drilled and slotted Rotors 2004 Subaru STI 5x100 12.8” rotors
StopTech (127.47019L) Drilled and Slotted 5x100mm Brake Rotor amzn.to/1Spi4OW $121.97
StopTech (127.47019R) Drilled and Slotted 5x100mm Brake Rotor amzn.to/1Spid4M $121.97
www.ctsvbrakeswap.com mounts $220.00
Milwaukee 48-89-2740 9/16-Inch Thunderbolt Black Oxide Drill Bit amzn.to/1WtvM7N
Muteki 32905B SR Series Black 12mm x 1.25mm SR48 Open End Lug Nut Set amzn.to/1WtweTt
ARP 1007716 Wheel Stud Kit for Subaru amzn.to/1sGzYV1
2004-2007 CADILLAC CTS V Hawk HPS Front and Rear Brake Pads amzn.to/1WtwfXy
Cheapest Setup
StopTech 125.47019 Premium Brake Rotor amzn.to/1VzQhPb $70.39 + $12.99 Shipping X 2 = 166.76
ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly amzn.to/1SrwQI0 $86.06
ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly amzn.to/1U460oz $81.17
ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit amzn.to/1Srx2qU $17.51
ACDelco 17D1050M Professional Semi-Metallic Front Disc Brake Pad Set amzn.to/1VzRGoT $34.69
www.ctsvbrakeswap.com/subaru-k... $220.00
Total Cost for Brand New Brembo’s 606.19
Camera Gear I use:
Canon 70D amzn.to/1Sp5ZeA
Canon 17-40mm F/4 Lens amzn.to/1Py9ER5
Rode Video Mic Go amzn.to/1Py9IQE
GoPro Hero 3 Black amzn.to/1Sp6jdb
Manfrotto 502 video head here amzn.to/1VYc97G
Rode Video Mic Go amzn.to/1Py9IQE
Zoom H1 Handy Portable Digital Recorder amzn.to/1SQh72t
Lapel Mic HUACAM YYPJ-01-1 amzn.to/1SQhfyQ
ProMaster XC525 Red Tripod With Head amzn.to/1roNPyN
Channel Art by Synq DZN Check out his Channel
/ improvings
plus.google.com/+AkzMC/

Авто/Мото

Опубликовано:

 

9 май 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 246   
@thatsmybit
@thatsmybit 8 лет назад
Wow Blake it's been a long ass time since I've been so intrigued to see something. This is by far the best swap ive ever seen possible. Can't wait for the install
@ArtofFrugality
@ArtofFrugality 8 лет назад
So much YES! This is going to be great. Really looking forward to seeing the overall outcome.
@dhuerta83
@dhuerta83 8 лет назад
I'm doing this! I have heard of the CTS brake swap but glad to have watched your video going over it all...can't wait for the install
@TaylorWhiteVlogs
@TaylorWhiteVlogs 8 лет назад
Can't wait for the install! Congrats on the channel success. Good shit, as always!
@nosubswrx
@nosubswrx 8 лет назад
Was wondering who'd be the first to jump on youtube with a video of the CTS-V BBK swap. Nice vid thanks for breaking it down Blake! Going to try and get these installed on my 15!
@MNeuenswander
@MNeuenswander 8 лет назад
Would totally consider doing this upgrade on my 16 WRX. Looking forward to the install video.
@davidmudrik6539
@davidmudrik6539 8 лет назад
So much goodness, can't wait for the install, you'll definitely have to make a video on how you bed in the breaks
@charliedeaver
@charliedeaver 8 лет назад
Really looking forward to seeing the install. I have been eyeing this kit and want to see how it goes. I am sure you will be a good person to check the brake bias as you will be standing on the brakes pretty hard. Thanks for being the guinea pig :)
@Emorhino91
@Emorhino91 8 лет назад
I can't wait to see this! I was gonna do this to my 08 Forester!
@mitchsfixes4937
@mitchsfixes4937 8 лет назад
Yoooo, I have never heard of this! Thank you for sharing this man. That's just cool, deff an awesome upgrade for the money making me wanna spend more money now though 😩
@merrekl9890
@merrekl9890 8 лет назад
That looks like a very sweet project ! Can't wait for the install !
@BlakesGarage
@BlakesGarage 8 лет назад
+Merrekl Thanks dude!
@THEFUTBALLER15
@THEFUTBALLER15 8 лет назад
Man I've been searching for a more affordable bbk for my WRX! Can't wait to see the follow up! Great video Blake!
@BlakesGarage
@BlakesGarage 8 лет назад
+Christian Santizo Thanks Christian!
@stefankoles
@stefankoles 8 лет назад
can wait to see the install
@wrxnate2450
@wrxnate2450 8 лет назад
So much awesomeness. Can't wait to see the process. This looks like a good future project for me too.
@UnderTheRadarLLC
@UnderTheRadarLLC 8 лет назад
Can't wait to see the install vid and to see them on the car 👍👍👍
@BlakesGarage
@BlakesGarage 8 лет назад
+UnderTheRadarLLC Hell yeah buddy!
@Gricebros
@Gricebros 8 лет назад
Awesome man! We were looking for something like this. Always wondered about those big Cadillac brakes being put on another car!
@xfysbx
@xfysbx 8 лет назад
Schwweeeeet! Can't wait for the install
@accordracin96
@accordracin96 8 лет назад
Thanks Blake! How come people haven't done this swap sooner? I've only heard of it recently. Looks like a killer deal! Excited to see the install video and new autox videos with them installed.
@SpencerHogg
@SpencerHogg 8 лет назад
Omg it's like Christmas for you man look at all those boxes hahaha!!! Awesome video man, I want a BBK... Ahhhhh
@nabatron21
@nabatron21 8 лет назад
I just picked up my neon green powder coated brembos yesterday just waiting on my other parts for it!
@Zooluu_F10
@Zooluu_F10 8 лет назад
Great vid man! I just subbed and I'm really excited to see how it goes. I'd like to do this with my 10' WRX! It would be more cost effective than going the group N or official subie Brembo rout! Looking forward to the follow up vid! Peace!!!
@Trades46
@Trades46 8 лет назад
The Cadillac ATS has great brakes. I can only imagine how well they will perform on the lighter WRX.
@BlakesGarage
@BlakesGarage 8 лет назад
Parts list Change to your cars specific brake lines and get the proper rotor depending if your a 5x114.3 or 5x100Carbotech Performance Brakes, CT1001A-XP8 CTSV 2004-2007 front Brembo amzn.to/1Spf45b Centric 950.47507 Brake Line Kit amzn.to/1SpfdFP 950.47006 Stoptech Stainless Steel Braided Brake Line Front amzn.to/1Np3VT9Stop Tech 950.47507 Stainless Steel Brake Lines Rear amzn.to/1Np46h6ATE 706202 Original TYP 200 DOT 4 Brake Fluid - 1 Liter amzn.to/1SpfvMX StopTech 125.47019 2004 Subaru STI 5x100 12.8” rotors Premium Brake Rotor amzn.to/1VzQhPb ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly amzn.to/1SrwQI0 ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly amzn.to/1U460oz ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit amzn.to/1Srx2qUTotal Cost for Brand New Brembo’s with Race Pads and steel braided lines front and rear $860.59If you want drilled and slotted Rotors 2004 Subaru STI 5x100 12.8” rotors StopTech (127.47019L) Drilled and Slotted 5x100mm Brake Rotor amzn.to/1Spi4OW $121.97StopTech (127.47019R) Drilled and Slotted 5x100mm Brake Rotor amzn.to/1Spid4M $121.97www.ctsvbrakeswap.com mounts $220.00Cheapest Setup StopTech 125.47019 Premium Brake Rotor amzn.to/1VzQhPb $70.39 + $12.99 Shipping X 2 = 166.76ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly amzn.to/1SrwQI0 $86.06ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly amzn.to/1U460oz $81.17ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit amzn.to/1Srx2qU $17.51ACDelco 17D1050M Professional Semi-Metallic Front Disc Brake Pad Set amzn.to/1VzRGoT $34.69www.ctsvbrakeswap.com/subaru-kits/frs-brz-gt-86-4-piston-ats-caliper-bracket-kit $220.00
@glass-man-2527
@glass-man-2527 8 лет назад
Hey brother, I'm huge fan of your channel man!! I wanted too see if when you do the install can you check if the stock 17" wrx wheels will still fit? I'm very curious. I'll be ordering this kit for my 14 wrx as well.
@BlakesGarage
@BlakesGarage 8 лет назад
Glass-Man-252 I'm going to try it out for sure see what needs to happen to make them fit.
@glass-man-2527
@glass-man-2527 8 лет назад
+Blake's Garage Awesome! Thanks for the reply brother.
@CL_Audio_Tuning
@CL_Audio_Tuning 5 лет назад
Duude!!! i am sooooo doing this!!!! Love it!!!
@cavalinorampante1
@cavalinorampante1 6 лет назад
I came for the brakes. I stayed for the beard. Good stuff👍
@MarkCalica
@MarkCalica 8 лет назад
This is awesome. Now all I need is the bracket that fits on my Speed.
@andrewspringer6945
@andrewspringer6945 8 лет назад
I read about this a while back and was thinking about doing it to my BRZ but was in a pretty bad accident recently it was totaled :( BUT!!!! I ended up replacing it with a 2013 WRX hatchback and am loving it so far. I'm eagerly awaiting the followup videos for this 👍👍👍
@BlakesGarage
@BlakesGarage 8 лет назад
+Andrew Springer Bummer hope you were ok. Hopefully this upgrade works great.
@marcuswainwright4803
@marcuswainwright4803 8 лет назад
Love the camera setup bro some people don't understand the work that was put into this
@BlakesGarage
@BlakesGarage 8 лет назад
+Marcus Wainwright Thanks Marcus! Yeah its a lot of work and gear to make videos like this but also a lot of fun.
@CalgaryCooper
@CalgaryCooper 8 лет назад
I want those. Looking forward to the results.
@unitedscum
@unitedscum 8 лет назад
Nice job sourcing those parts!
@BlakesGarage
@BlakesGarage 8 лет назад
+Anthony Bruno thanks Anthony!
@zutekeela8516
@zutekeela8516 8 лет назад
nice stuff, brembo is good shit !!
@06wrxdude
@06wrxdude 8 лет назад
Big Brake Kit FTW! I didn't know Cadillac was so gangster. Hope it all works out.
@JacobRDoty
@JacobRDoty 8 лет назад
The amount of small things that are sort of unspoken about with installs and upgrades dealing with cars that I learn on your channel is crazy. Lol. Keep it up. My mom sent me a picture of a couple WRXs parked at a Shell one time and I zoomed in and recognized you and your beard lmaoo
@BlakesGarage
@BlakesGarage 8 лет назад
+Jacob R. Doty What! Where at? I wonder if that was at one in elk grove after autocross a while back.
@JacobRDoty
@JacobRDoty 8 лет назад
Blake's Garage Yeah I believe so. It was the one by the EG Auto Mall. I think it had another blue hatch and a white sedan in the photo. It was a while ago, just forgot to mention it lol
@BlakesGarage
@BlakesGarage 8 лет назад
Jacob R. Doty Yeah that was after autoX me and Derek in his white bugeye LOL he had broken an axel that day.
@SkylineLvr82
@SkylineLvr82 8 лет назад
Looking forward to your install and review video. Know of any budget brembo's that would fit the rears?
@kdizzle6603
@kdizzle6603 8 лет назад
Awesome!
@CarsWithJR
@CarsWithJR 8 лет назад
That's awesome Blake! I gotta do this. I'm interested in seeing the drilling part for the adapters.
@BlakesGarage
@BlakesGarage 8 лет назад
+My WRX Channel Can't wait to do the install. Need to get some baselines first.
@catzbunn
@catzbunn 8 лет назад
Baller!!! Review in the future. For sure need to see how they feel.
@WhiteWingSTI
@WhiteWingSTI 8 лет назад
BBK upgrade soon?
@BlakesGarage
@BlakesGarage 8 лет назад
+Cali_WRX Hell yeah!
@fezgoodday
@fezgoodday 8 лет назад
Another awesome addition man! Some pretty funny points! Cant wait for the vids to follow! ..Question, just wondering whats going on with the Mustang? And will she ever be in any of the videos?!?! Haha
@BlakesGarage
@BlakesGarage 8 лет назад
Thank's man, Someday I would like to do some work on it again but I don't have the funds currently.
@alcolavista-22
@alcolavista-22 5 лет назад
Nice 👍
@WhiteWingSTI
@WhiteWingSTI 8 лет назад
Them cutting tools! And your donuts! Haha!!
@BlakesGarage
@BlakesGarage 8 лет назад
+White Wing STI Yumm Donuts!
@s13papi_
@s13papi_ 8 лет назад
Nice! Any modifications to the master cylinder to make these work??
@MrGovenator1
@MrGovenator1 8 лет назад
Oh man, I am going to do this at some point.
@joesantos7196
@joesantos7196 8 лет назад
Nice
@LastHumansGarage
@LastHumansGarage 8 лет назад
oh bad ass, i always wanted one of those.
@BlakesGarage
@BlakesGarage 8 лет назад
+LastHumansGarage they would look nice on the 15'
@kIDlOwbEaTs
@kIDlOwbEaTs 7 лет назад
so what about the rears? the ctsv swap page only says fronts
@joshuas10
@joshuas10 8 лет назад
What is the eye to eye measurement of the holes on the calipers? I want to see if they will fit my gmc sierra.
@wardind506
@wardind506 8 лет назад
Sweet setup! I love how cheap it is for a swap! Any chance you could give me the dimensions for those caliper adaptors? I'd like to make my own and save the 220$ because I have access to a machine shop
@PittiesAndMore
@PittiesAndMore 8 лет назад
Now, that's a knife.
@LostInPhilly89
@LostInPhilly89 8 лет назад
I have a '14 WRX as well. From what I have researched, the OEM wheels should be BBK-friendly. "Should" is the key word, though.
@car24dude
@car24dude 4 года назад
Please do a brake up grade on a 2010 NON WRX Subaru Impreza.
@davidromba3584
@davidromba3584 8 лет назад
SUPER excited to see someone on youtube doing this, as I've been considering it myself. When you DO get them installed, can you mock up a stock wheel? I read somewhere that someone thought they would fit with the stock wheels and a small spacer. If you could try it super quick (even without the spacer) that would be very helpful.
@davidromba3584
@davidromba3584 8 лет назад
Scratch the mock up, I just went on a research binge and found where someone had done it. Still super excited for your project!
@BlakesGarage
@BlakesGarage 8 лет назад
+t- wrx yeah I found that too from another subscribers comment. I will try it I figure I may have to run a spacer for the stock wheels. But I'm waiting for the new wheels before I do the install so I don't run into issues.
@willyraypaul6617
@willyraypaul6617 8 лет назад
My question is what about the rears? I want to do a complete set.
@meyerry
@meyerry 8 лет назад
what are your ideas for the rears?
@chrisriccelli1419
@chrisriccelli1419 8 лет назад
is there a link for the rear calipers for does the driver side front go to the driver side rear and vice versa with the passenger?
@DailyDriver.
@DailyDriver. 6 лет назад
What if I wanted to use bigger wheels and install the Cts v six piston calipers and the huge Corvette 14 inch rotors ? Or something bigger than this four piston gm part caliper
@simplybuiltgarage
@simplybuiltgarage 4 года назад
What about the rear calipers we able to do those with these
@MrImprezaWRX1
@MrImprezaWRX1 8 лет назад
Hmmm this is very tempting not going to lie!!!
@BlakesGarage
@BlakesGarage 8 лет назад
+MrImprezaWRX DO IT!
@MrImprezaWRX1
@MrImprezaWRX1 8 лет назад
+Blake's Garage looks a little complicated though lol
@BlakesGarage
@BlakesGarage 8 лет назад
MrImprezaWRX Na I made a how to install its not that bad at all. I will do it for you if you come out this way,
@MrImprezaWRX1
@MrImprezaWRX1 8 лет назад
Road Trip!!!! haha let me check out the how to video.
@jaimecarrasco515
@jaimecarrasco515 8 лет назад
ohhhh yea
@searchingfortheright
@searchingfortheright 7 лет назад
will this fit a 2017 impreza sport with 18s?
@darkrashan
@darkrashan 8 лет назад
Would these still be an upgrade on a 2010 sti hatch? I thought he said they were STi rotors already, but the calipers/pads do seem bigger
@Crazeybiker
@Crazeybiker 8 лет назад
would my rota 17x9 rims fit over these brakes?
@Jolinator
@Jolinator 8 лет назад
Love your channel man, how does the internal volume of these brembos compare with subaru part brembos? just a bit worried about brake bias issues, All the best from downunder
@BlakesGarage
@BlakesGarage 8 лет назад
+Jolinator I'm not sure yet but I will give you guys a good review of that I think of them.
@Jolinator
@Jolinator 8 лет назад
Blake's Garage Awesome man , all the best
@BeastWRX
@BeastWRX 8 лет назад
+Jolinator one would think that with the added fluid, steel braided lines for zero line flex it should at least perform as well as the OEM brembo brakes. (speaking on a volumetric level, not performance.) Then again, much like Jon Snow, I know nothing. Lol.
@TWRX_Chuck
@TWRX_Chuck 8 лет назад
Dude this is awesome. How the hell are those Cadillac calipers so damn cheap?! That's the one major thing I hated about my hatch, the brakes were awful.
@BlakesGarage
@BlakesGarage 8 лет назад
+T-WRX Thank you GM for the bulk buy keeping the prices low!
@VENENO-6
@VENENO-6 8 лет назад
that's is fucking sweet. I about to post this in AWD Army. thanks blake
@BlakesGarage
@BlakesGarage 8 лет назад
+Onix gonzalez Thanks man!
@chrgav1286
@chrgav1286 8 лет назад
Can you put those in the rear? Because $90 is really good pricing so might as well put it in the rear.
@calstyleee
@calstyleee 8 лет назад
so what do you do for the back?
@stevesisniegas
@stevesisniegas Год назад
well done video, my question is can i install this bbk to a subaru legacy 03 2.5, rims are 5x100, thanks
@BlakesGarage
@BlakesGarage Год назад
Usually you have to run 18 inch wheels but yeah 5x100 works
@ifnotyouheartwhoelse
@ifnotyouheartwhoelse 8 лет назад
Please try the stock wheels over the kit once you get it installed. I would love to know if they fit.
@BlakesGarage
@BlakesGarage 8 лет назад
+Benton Plunkett I will I'm wondering too.
@carlosdaparicio7432
@carlosdaparicio7432 7 лет назад
Great video, would it also be possible to do this to a 16' Forester?
@BlakesGarage
@BlakesGarage 7 лет назад
Carlos D'Aparicio yes, you can definitely do it to a forester
@carlosdaparicio7432
@carlosdaparicio7432 7 лет назад
Thank you!
@antdo
@antdo 8 лет назад
LOL dat acdelco doughnut!
@BlakesGarage
@BlakesGarage 8 лет назад
+Do Boy's Garage Thank you GM yummy!
@juicejackson52jackson67
@juicejackson52jackson67 Год назад
What caddie did those calipers come from?
@peterlee4538
@peterlee4538 5 лет назад
This calipers they same with the subispeed What year with calipers
@dudebrogaming8886
@dudebrogaming8886 8 лет назад
Great video. I have a 14 wrx and the link for the rotors says 12.9 mm bolt size. Will this still fit or does it need to be 12.8? thanks blake
@BlakesGarage
@BlakesGarage 8 лет назад
+Dudebro Gaming the link I gave you for the rotors is correct.
@daddyr0undr0und33
@daddyr0undr0und33 4 года назад
Has anyone done this swap on a pre 2000 NA legacy or Impreza? If so can someone point me in that direction?
@yordan21211
@yordan21211 8 лет назад
can you adapt it to a 370?
@peterhatch1583
@peterhatch1583 2 года назад
How do I get to your parts part number looked at comment could not find any thing else thks
@sauceracing7923
@sauceracing7923 8 лет назад
can't wait too see them on your ride what size wheels u got?
@BlakesGarage
@BlakesGarage 8 лет назад
+Duct Tape Currently the stock wheels are 17x8 with 245/45R17 Bridgestone Potenza RE-11. The new wheels I'm getting are 18x9.5 +35 5x100 with 265/35R18 RS3's.
@sauceracing7923
@sauceracing7923 8 лет назад
+Blake's Garage cool bro looking forward to seeing them
@dustiinw
@dustiinw 8 лет назад
NICE!!!
@BlakesGarage
@BlakesGarage 8 лет назад
+Dustin Williams thanks Dustin you should do it on your ride!
@dustiinw
@dustiinw 8 лет назад
+Blake's Garage I might have to man! Idk if the works would clear them though haha
@BlakesGarage
@BlakesGarage 8 лет назад
***** I don't see why they wouldn't you have 18's know? should clear no problem.
@robertoclay5729
@robertoclay5729 2 года назад
i guess I'm kind of randomly asking but do anyone know a good website to watch newly released series online?
@clydebrennan2625
@clydebrennan2625 2 года назад
@Roberto Clay Flixportal xD
@BrittanyMartin917
@BrittanyMartin917 8 лет назад
are you going to use the spacers or are you wheels offset enough to allow for the calipers without them? but thats looks super sick is the rears a single piston caliper? if so and you need more stopping power will you be going with a 2 piston or a second 4 piston and just add a brake bias upgrade?
@BlakesGarage
@BlakesGarage 8 лет назад
+Brit Freeman The spacers are for the rotor not the wheel. They have to be used. I also have new wheels coming today or that will not be an issue. Not sure what I'm doing for the rear yet I'm going to test this for now and see how it is first.
@BrittanyMartin917
@BrittanyMartin917 8 лет назад
+Blake's Garage ah okay well either way just make sure you are able to use ample amount of thread on your lug nuts so you dont loose a tire
@timcruze11
@timcruze11 8 лет назад
Why you do this to me Blake? Now I want to do this lol!
@BlakesGarage
@BlakesGarage 8 лет назад
+klutchdumpin hahah do it!
@Itachlazcano21
@Itachlazcano21 6 лет назад
Does it fit wrx 02
@jdmcommute
@jdmcommute 8 лет назад
Sweet! Are you going to have to re-drill the rotors to a 114.3? I had to do that with my custom turbo civic project. I had to make a rotor hub centering tool to do it.
@BlakesGarage
@BlakesGarage 8 лет назад
+jdmcommute nope I'm 5x100 if you are 5x114 then just get regular STI Rotors.
@jdmcommute
@jdmcommute 8 лет назад
+Blake's Garage oh ok. I thought so but I didn't hear you mention that in the vid. I Was actually planning on putting these CTSV calipers on my Chevelle. But I was looking at the silver ones with the black logo, I guess they are the same. $89 is a steal.
@BlakesGarage
@BlakesGarage 8 лет назад
jdmcommute Yeah still Brembo but they cost a bit more. Also this is what they made the bracket for on the Subaru's. The 240 SX brackets use the silver ones.
@jonathangrillo8178
@jonathangrillo8178 8 лет назад
is the spacer looking piece ur putting behind the rotor just a wheel spacer or something special
@BlakesGarage
@BlakesGarage 8 лет назад
+Jonathan grillo the spacer kicks out the rotor between it and the hub. This is so the caliper has the correct alignment with the rotor. Not sure yet if it adds offset but I will compare the thickness of the stock rotor if I remember.
@car24dude
@car24dude 4 года назад
What better break up grade can I do for a 2010 Subaru Impreza 2.5i Premium? With. 16” inch rims. It’s not a WRX or a. STi. Anything better than factory will be a PLUS...
@BlakesGarage
@BlakesGarage 4 года назад
Do the 4pot 2pot conversation. From early Wrx
@wrx-9rr701
@wrx-9rr701 8 лет назад
What a bargain, paid more just for Used Front STi Brembos and Rotors on my '05 WRX
@BlakesGarage
@BlakesGarage 8 лет назад
+WRX-9RR I know it really is a amazing deal for all new stuff.
@MWANIFES
@MWANIFES 6 лет назад
Do you have info on doing the the rear set up?
@BlakesGarage
@BlakesGarage 6 лет назад
Hulk Hood nope just do either a two pot setup in the rear or run more aggressive pads in the rear
@eionmccullough6452
@eionmccullough6452 8 лет назад
leave the cadillac script, shit looks bad ass
@dudebrogaming8886
@dudebrogaming8886 8 лет назад
Also what size spacers should I purchase? thanks
@BlakesGarage
@BlakesGarage 8 лет назад
+Dudebro Gaming Not sure on that but I will let you know when I know.
@22bprototipo35
@22bprototipo35 Год назад
@BCabral43
@BCabral43 8 лет назад
how do you sharpen your knives? wet stones?
@BlakesGarage
@BlakesGarage 8 лет назад
+BCabral43 Yep, Wet stone then ceramic stone then leather strop to pop hairs!
@LucianoClujeanu
@LucianoClujeanu 5 лет назад
List of parts ?!
@jmato0083
@jmato0083 7 лет назад
There is one gigantic flaw I see in this kit and that's the fact that it changes the rotor offset of the car. From the factory, your rotor's offset is selected so that the rotor is centered above your wheel bearings. Throw off that balance, say by using a rotor of a different offset, and you will blow wheel bearings. Maybe with light street use, it may never become an issue, especially if the change in offset is not too great, however if you autocross or especially track... well, get ready.
@BlakesGarage
@BlakesGarage 7 лет назад
J Mato00 no issues yet and it's not much spacing. Larger wheels would have more of an effect on this than anything.
@MrWaidly
@MrWaidly 8 лет назад
Hey Blake, I am gearing up to start ordering parts and get this in over the next month or so. The parts list includes the lines, the pads, and rotors and all the goodies needed. I have a 2010 WRX - if I follow all the parts listed I shouldn't need anything else right? You linked hawk HPS pads front and rear. But this is only a front swap right? So would the rears fit on my OEM rear calipers? Also, did you ever upgrade the rears?
@MrWaidly
@MrWaidly 8 лет назад
Also which do you recommend for non-race pads? I don't do AutoX enough to need those honestly.
@BlakesGarage
@BlakesGarage 8 лет назад
Those stock AC Delco ones I show will work nicely.
@BlakesGarage
@BlakesGarage 8 лет назад
Nope I have only done the fronts. They only make a kit for the fonts. And you can upgrade the rears to Subaru 2-Pot calipers if you want. But I haven't yet and have had no issues.
@MrWaidly
@MrWaidly 8 лет назад
Ok, I'm stoked. Started buying some parts today, hoping to get the rest next week. I was contemplating getting the 06/07 4/2 pots set up but I can't stay away from the sexy look of the brembos!! I really love all your videos, they are super helpful for a DIYer like myself! I've taught myself all the mods I've done, TBE, intake, Verticooler, coilovers, sways, on and on! Can't wait to take on this project!
@BlakesGarage
@BlakesGarage 8 лет назад
+Waid Hoyt awesome Waid! You are the kind of guy I created the channel for. Keep up the mods Wrench On!
@pastnorth7929
@pastnorth7929 3 года назад
Would this fit 17” rims with a spacer
@BlakesGarage
@BlakesGarage 3 года назад
Nope
@MichaelC86..
@MichaelC86.. 8 лет назад
May have missed it somewhere. What was the final cost of the completed project?
@MichaelC86..
@MichaelC86.. 8 лет назад
Never mind lol. I see it now
@818ek9
@818ek9 8 лет назад
so the total cost was 660?
@adalbertorosa1015
@adalbertorosa1015 Год назад
Will this fit for a 2010 Subaru legacy 2.5
@adalbertorosa1015
@adalbertorosa1015 Год назад
??
@MrGetBad4u
@MrGetBad4u 8 лет назад
Hey Blake, this is a awesome idea. I have a 08 STi Hatch. As you know, the STi's have a Brembo caliper already. I have some bad rotors and need to get them replaced. But I have one problem...the bolt that holds the caliper is seized into the caliper. The dealer wants me to buy a new caliper. The STi caliper runs $700 per caliper. That's insaneee. I can buy a used set for $1000+ but not sure if I want to do that route? But Would these calipers work with a STi setup with a 5x114.3 wheel? I'd of course get new rotors for the 5x114.3, but not sure if the calipers would work with this or not? How have the brakes been holding up? Strong stopping power? Is there any difference between these calipers and the STi Brembo caliper? They look the same. I would just get them painted to my liking and get them babies put on. Thanks man.
@BlakesGarage
@BlakesGarage 8 лет назад
I would send a message to CTSVBRAKESWAP.com and see if they know. I assume they would work but you would need to buy the bracket from them because the bolt pattern spacing is different on these.
@BlakesGarage
@BlakesGarage 8 лет назад
Yeah the stoping power is much improved I'm loving them so much. I'm able to rip canyons now with out feeling like my brakes are going to stop working.
@MrGetBad4u
@MrGetBad4u 8 лет назад
+Blake's Garage thanks man. ill message them
@jaxchrisfla10
@jaxchrisfla10 8 лет назад
What was out the line that connects the two sides of the caliper together? The hard line on the bottom.
@jaxchrisfla10
@jaxchrisfla10 8 лет назад
What about *
@BlakesGarage
@BlakesGarage 8 лет назад
+ls2 e36 these calipers have that internally.
@jaxchrisfla10
@jaxchrisfla10 8 лет назад
+Blake's Garage awesome thanks for the info. Waiting on them to get back to me about when their e36 kit is coming out so I can do tell the swap also.
@BlakesGarage
@BlakesGarage 8 лет назад
ls2 e36 That will be bad ass when they do.
@joemcneil8009
@joemcneil8009 8 лет назад
What would be equal or greater performance rear brakes to go with these fromt ones?
@BlakesGarage
@BlakesGarage 8 лет назад
Subaru 2 pot rears or Brembo rears.
@joemcneil8009
@joemcneil8009 8 лет назад
Id love to get Brembo for the rear to go with the front set, but i cant find them anywhere. Even called shops on the east coast and they only send out front/rear togather. Sorry to bother ypu with this issue, just need a little help. Thanks again, wrench on.
@BlakesGarage
@BlakesGarage 8 лет назад
Enii gma Check flatiron tuning they may have them.
@Adrian5280.
@Adrian5280. Год назад
Why is the caliper from a 15 but the pads that go into it are from an 07 ?? Shouldn’t the pads be the same year as caliper ?
@BlakesGarage
@BlakesGarage Год назад
Because this isn’t an off the self kit.
Далее
QVZ PREMYER LIGA
00:18
Просмотров 1,2 млн
Я читаю переписки сына
00:18
Просмотров 732 тыс.
Building the ENDGAME invisible PC
27:30
Просмотров 2,6 млн
How to PROPERLY Paint Your Brake Calipers
14:26
Просмотров 2,3 млн
Brembo Brakes on a Budget [FRS/BRZ] [CTS-V Brake Swap]
11:42
COBB Tuning - AskCOBB - Subaru Data Logging
7:56
Просмотров 126 тыс.
9 Things You’ll REGRET Not Doing to Your Car
25:38
What Actually Happens When You Overheat an Engine
21:45
Cracked Windscreen Restoration!
0:41
Просмотров 4,7 млн
STAGE12 200CC FL-R EN ACTION 🧡🧡
0:49
Просмотров 19 млн