Camshaft Install on Long block for Foxbody Mustang 302 

Great video! Commentary and teaching is neccessary, even with simple common sense, we need reminders.

Junkya dog is phenomenal

I love all you videos man. Your timing cover came off way better then mine. I snapped two bolts off from the pump which added an extra headache. But I like that you always list off what the sizes of bolts are. It's helped me out a ton on many other videos. Keep up the good work!

This is so freaking helpful. Best detailed 302 cam install. I'm doing this as we speak and your helping me alot!

Love the video! I was a little nervous on doing a cam in my 302 swapped jeep now I’m feeling more confident. Thanks!

Your videos are great, and motivating me to work on my dad's old car, thank you!

Great video! Good mech tech keeping the lifters and pushrods organized. Thanks!

Actually rebuilt a 302! Did an e303 cam & bigger exhaust valves!! Installed an electric fan from a 97,98 mustang!! So far runs great! Blew a few fast furious wanna be's off road past couple of weeks ago.... these young bucks don't know old American muscle?! Lol!! They need a turbo or supercharger?!?!

I think that cams going to make it sound very nice. I got a similar setup but I'm running with a TFS 1 cam, GT40X 64cc heads to go with my GT40 intake. Its all put on my first 302 I was shown how to rebuild back when I lived in the state of Alabama. A friend of mine who owns SVP Unlimited shop is who showed me how to put all my internals and parts in. It was the best experience I've had and I still have the 302 block with internals that came out of my GT ready to be rebuilt for all motor applications. I dont know if you had to check piston to valve clearance since its got high lift like my cam but the F303 cam is what I may get for my next build.

Somebody has probably noted to set the cam timing marks before removing the gears. 👍🔔😁😎

Great video. I am in the process of swapping out the cam in my 93 fox and this helps so much. Respect!

Great video no bs right down to business. And good camera angles.niiiiiiice

Cool vid man.

Really helpful video, thanks 👍🏼

Great video very informative thanks for sharing

My Man Tony working on my ride, can't wait to hear that F303. Thank for everything Tony.

Get it dog! F303 ! I hav got 2 get me one of these!!! Lol! I'm still dreaming but soon I'll be skimming(prob spelled wrong!?)..... Your videos are motivating & helpful! Keep at it dogg !!!!!

aye bud could you do a comparison video on the explorer intake vs aftermarket? not sure if u have access to the equipment but meh itd be a nice vid

Nice easy install looking at putting one in a Mustang nice to see a video about it where they talk like a regular guy

I was told that the heads gotta be pulled to do lifters on 302s. Guess not, which is good since I'm replacing mine on my Explorer.

Quick question, did you degree the cam when you installed? Im doing the cam swap in my 351w, from flat tapper to roller lifter, with the trick flow cam. Do I need to degree that cam, I know I need to measure new push rods. Thanks man!

Hello sir, great video and I have a question. I want to install a small cam in my 86 Foxbody (Twisted wedge or E cam)? The engine will be installed and All stock. Is it absolutely necessary to replace the lifters, springs, push rods? Trying to keep cost down lol. Thanks!

Have you ever installed a a flat tappet cam on a fox? If so what was it and what length push rods did it need? Just thought I'd ask? I'm a novice.

Did you re torque the rockers in 13726548 on the compression strokes

So can I run a B303 cam on my 95 mustang gt 302 stock heads and block just for sound

If i swap a cam from my old motor to a replacement will i need swap the lifters from the old motor with the cam to the replacement because how it wore down or keep the original ones in there? Or should i replace the lifters?

With an E 303 cam what distributor gear should I use ? Block is a 94/95 roller.

Hey man what kind of Engine stand do you use and brand of tools are good Torque wrenches? Etc

What cams can I install with a decent lope where I don’t have to remove the heads?

Hey tony I have a 1988 5.0 mustang 5 speed, speed density. I got Gt40p heads, Gt40 ported lower intake ( tmoss ) 70mm throttle body, Afpr, Anderson ( CAI ) power pipe, 1.7 rr's and 3:73 rear gears. What is the best speed density camshaft to put in it?

Excellent information, it will help me a lot with my 302.. what is the torque on the rockers. I would appreciate

Engine will not run. Roller lifters stay pumped up and solid on stock cam. If you switch cam with different base circle and lift these lifters will not adjust. You have to use new lifters that are not pumped up. Or you can reuse original lifters but only if you have an adjustable valve train.

You forgot to put bolt in crank when pulling harmonic balancer. Good way to damage crankshaft.

🥸Weird buddy told me interwebs has OEM lifters cheap... low buck insurance for a happy fox

What is the highest lift camshaft you can go on a foxbody with GT40 heads what is the highest lift camshaft you can go on a 5.0 foxbody with GT40 heads stock bottom end

I always thought swapping a cam would be more of a pain or you just make it look easy man lol

Is that your little man in the background? Cool

thank you for not swaping LS CRAP onto mustangs

Need to make a valve adjustment video

I love you videos but were are part two's

Can new pushrods be used with the original stamped rockers as long as new lifters are used

when you change over to the gt40 heads do u need to change over the pushrod at all ?

Des the f cam pass emissions in Cali? Also , any issues with piston / valve clearance?

I have a question man, you installed an f303 cam on a stock pistons, the question is can i install x303 cam on a stock piston or there will be no clearance between the valve and the piston

Do you have tips on deleting the heater tube assembly? Mine starting leaking everywhere recently

Having problems getting the cam timing gear off. Any suggestions?

I got a question I've noticed some of the 94-98's some have dash clocks and some don't. Was their certain years that didn't have them

Hey Tony great info I have a question I have a 92 bronco 5.0 speed density if I install the heads and camshaft out of a 96 explorer end run the firing order of the 5.0 MAF system will it fire up with the speed density injection firing order and if it does will it wort the effort

Nice video, but do you have to pull the motor out

Quick question I’m tryna do a super budget build ,can i get away using the stock valve train with any letter cam? I read b cam definitely.....that is stock pushrods,springs,lifters,rocker arms???

Do you make sure it’s too dead center before taking this apart?

Hello, I have a stock ford used 302 and I want to put it in a 1986 Ford truck.What type of camshaft do you recommend me along with a set of afr 165 heads? Looking for some rough idle and about 350 hp.

I wish someone could tell me why they use b303 or e303 or f303 .... LIKE , WHAT ARE THE REASONS FOR THEIR CHOICES. ?????

What about the valve springs did you do them also

F cam is more for boost right? B and e for n/a?

Should I be worried about the guy in the background with the bolt cutters lol

Damn it I didn’t drain the fluids

yo bro my 1998 Mustang GT can I put a 1998 Crown Victoria 4.6 in it will it work and also does it have the same internals as the 4.6 that is originally in there right now the original motor has 200 plus thousand miles on it and I can't find the original 1998 4.6 I want to use a Crown Victoria motor or what kind of motor can I put just plug and play???? I would really appreciate it bro thanks

What's your go to tool brand?

Whats so great about a f303

This way easier than the 4.6

installing a new cam in a old engine is a bad! thing dude!

;D