Can it Take a K26? - Episode 19 

I feel like you should do a series like this where you try to get a blaster to take a k26 by any means necessary. (Obviously just as a once in a while thing, like one blaster/episode)

anyone else think that the sharpfire looks like the old nes zapper?

I modded my SharpFire with the stock spring and a firestrike spring and it works...kind of,you need to pull the trigger really hard but when you do it makes the dart leave a welt on your back.

"i now what the answer, and you dont" i knew the answer when you said breech loading

Hehe what about the sharpfire delta? Oh wait..... HASBRO! (Its a blue sharp fire)

Can a k26 take a k26

rival springers. the apollo, artemis and atlas. You'vs done pretty much every blaster I've got save those.

You could totally cut away the barrel shroud bit of a falcon fire and the little box that has the rail. Make a neat compact backup gun.

i plan on making something similar to a power stock for a snapfire

Dear Captain Xavier, after buying a sharpfire and putting a spring upgrade in it, I realised it is possible to put a nightfinder spring (the one with a low amount of coils) in a sharpfire. After the nightfinder spring is added, the sharpfire will still catch and prime as usual. Greetings from a fellow Nerfer

If you wanted to upgrade the Falconfire. I'd cut out the dart storage, do shell modification so you can stick a katana magazine in the bottom of the shell. I'd take the plunger out of an ionfire or sharpfire and get rid of the priming indicator. replace the dart tube with one from a sharpfire, hog it out where you need to, put a dart pusher and attach a brass or aluminum barrel to the front of the falconfire. Presto, sealed breech mag fed short dart shooter, with 18 kg spring potential.

I love my Falconfire; it feels good, looks cool as hell and is pretty fun to load, if a little slow. The only change I'd make is removing the dart storage in the bottom.

Looks like it's a fire fight!

I recently got myself a falcon fire, and first thing i did was chop off the dart holders and the barrel. It's much more compact now and im looking into other mods.

Hey Captain Xavier! I just recently found your channel, and have been binge watching your videos. I just have a hypothetical question related to re-shelling blaster innards: Would it be possible to completely take the innards out of a blaster like the Rampage, and put it into a permanently folded-out Deploy? (For the mind games) As well as do you think it would be possible to put improved blaster internals into the nerf Star Wars Han Solo blaster? Are there any well-performing blasters that have parts similar enough to work in the same fashion as the Han Solo blaster, and if so, are there any that are thin enough to fit inside of the blaster's shell without cutting it up? (I really want that blaster to be good, because it looks so amazing! Yet it's very strange plunger tube and tapering spring make it so funky to work with, that it would probably be easier to just put new innards into the shell.) If you think any of these ideas/concepts are cool, feel free to use them. You're the coolest!

I think most of us saw this coming but it's still nice to know. Also, if you get your hands on them, you could do an ep on all the recent Specter reshells

You can reload the Ionfire by dropping a dart down the barrel then priming for faster reload without bending the dart in and when you close the breach it pushes the dart into place against the tab in it.

You could maybe modify the falcon fire to look like a c96

This is a representation of just because you can doesn’t mean you should

3 years later this came into my recommended

Chris Scaramanga Cartaya, you got a channel plug!

Falconfire works perfect with Retaliator springs ....at least mine does. 🖒

I just love your intro and your amour, keep up the good work!!

hey cap thanks for replying to my K26 suggestion

you can add any retaliator spring. so you can easily put in a 7 or 14kg spring

just recently they made a new favorite pack that includes more darts and one of those storage attachments that holds,like, 5 darts

paint or reshell the sharp fire into a nes snes zapper

Where my boys skittles and Fanta at?

For the Falconfire a firestrike spring nested with the original works well.

Great video Captian X! and by the way the Hyperfire mode is going well so far!

I put a thunder hawk spring in my modded sharpfire and it’s extremely powerful

I'm pretty sure ionfire came out in 2015 js

the falcon fire with a magazine would be awesome, especially if you put the tac rail on the mag.

With my sharpfire i have all the locks every single one removed and its fun just to mess around and it weirdly shoots a little harder and it is the elite one

In Northern Canada we call Stefan's Scotty's

will that was a super fast reply

Hey, someone also thinks the sharp fire is like the C-96

I use a cut down Ace #62 in my Sharpfire kits. Fits beautifully.

Um... Cap? What I did for my Sharpfire was to keep the original spring in the blaster and then put the bigger spring over the other spring, and it worked out fine.

maybe you could make a episode with Vortex blasters

The falconfire uses the same size spring as the omw upgrade springs for the retaliator

I tripled up the spring in my sharpfire. I use it as my backup. It shoots 104 fps

Everyone, I have deduced that an adventure force havoc spring fits in a sharpfire, and It is quite powerful.

If I had to choose between the sharp fire and the ionfire, I’d take the Ionfire for the high modularity

Am I the only one who would like captain xavier to take a week or two off from youtube so he can instead spend the time he would use on youtube, on the etsy update? It has been a pretty long time,but you are a busy guy, so I understand.

Next breach loader: Firefire

I modded my sharp fire with a rampage spring so it shoots pretty hard

If you do get the tri strike pump grip, please make an installation video on it and tell us what material to print it from as well as where to get the materials that you may use to attach it. Thank you.

I like the sharpfire (with the stock) for cqc

Nice video

Not surprised on no K26, but will the spring from a Tek-6 fit? It's reasonably compact and you can find the little things everywhere.

thanks for finally doing the sharpfire bruh

Shell fed blasters or turret blasters.

I load my Sharpfire by putting the dart in through the barrel

The Sharpfire can't take a k26, but it can take a 14kg spring and be an absolute beast

Running's number 54 and 55 springs

Hello Captain X!

I just realized that the brainsaw was a reshell of the rough cut

While I'm early, I have a question for Chaylo. I'm making a firefly drain blaster and want to make a single barrel. Do you think it would be a good idea to make a breech with fishing line epoxied right in front of the dart insertion point and run to the end of the barrel for the legit string spin thing?

I know that the retaliator 5kg spring will work for the falconfire

ITS A JOKT RESKIN! Wait, no... Wait a sec... I think I got this... One last time ITS A SHARPFIRE RESKIN

Ayy a K26 video.

The shartfire

can the zombistrike doominator take a k26? also while your at it can you make a horizontal pump?

i thought the luger p08 was the pistol carbine

Have you done a Spectre Rev5 or an Elite SPECTRE REV5? If not I would like to see that as well as my previous request of an Alphahawk.

They make a K26 like spring that IS SO BEEFY and it fits great in the sharpfire! available at ace hardware 😊

I wonder if it is possible to somehow make the sharpfire magazine fed

I have a idea blaster which I would love to see if it can take the k-26, could you try the Expand-a-blast?

I would just like to verify, would the falconfire work with a 5kg retaliator spring, and how much would i need to mess with the internals to put it in

Captain Xavier i am having trouble reassembling my falcponfire can you do a video on it???

Sharp-Fire does need a C96 magazine mod.

I got a sharp fire and my friend was like dude u just got a sniper rifle

When i putted a stronger spring on my FalconFire it keeps Getting stuck when i close the door and i solved it by removing the clicky thing when you prime it

I wonder if the nerf doubledown I broke would work in my falconfire.

Try putting a dollar tree nerf gun spring

You should do some vertex blasters for can it take a k26

Captain, Can the Majik over the door duck hunting blaster take k-26 (you can get it at Walmart in the sporting goods section

Breech loadersssss l0l

what spring was used for the sharpfire then??

don't put springs in the sharp fire I put a jolt spring in it and it broke after about 20 shots. 😢

All those Nerf guns have the same type of plunger tube I think

which is a jolt reshell

Hillman #62 spring cut to fit, will work in these. I think its something like 14-16kg

1:40 that's what she said.

10th comment is... I love you Captain X

New series suggestion, can it take a k27? Lol

I wanna mod a SharpFire and make it look like a Mauser that can be clip fed

Does anyone else think that the Falconfire looks like a TEC-9

they all the same but the sharpfire has stronger components

Did that sharpfire have a metal trigger???

But even if the sharp fire is modded can it still take k26

ahoy captain, can ye stampede take a k26? i know it's mech may ye stronger than yar vulcan.

Today we answer the age old question can it take a k26 let's talk about that

can the Modulus Barrelstrike take a K26? or can I at least brass the barrels?

In ion fire

Great vid what inch PVC and roughly how long does the PVC need

I got the exclusive

Can someone explain what a k26 is? Is it just a spring? Or a complete different upgrade

Hey cap which blaster is the biggest pain in the butt to mod? Oh and if you do a q&a episode i will definitely tune in to this bat channel thanks!