Can you fix an Engine Mount with Window Sealant? 

It's been almost 3yrs. How is the sealant now?

Man, I really appreciate the view of the mount while putting the vehicle into gear and out. Great shot.

Great demo. Have used 'roof and gutter' on the rear trailing blades on the Aussie Ford falcon sedan like many others have done. Longer the better on curing time. Made me smile when you showed the smoothing job, exactly like mine. Many thanks for this demo video.

*Sebastian: Thank you for your clear, concise, single-objective presentation. If you're curious, as was I about specified cured hardness, Henkel Teroson PU 8597 Scheibenkleber: Per DIN 53505 method, hardness is Shore 70A after curing for 7 days at 22C, 50%RH. Cure time curve is temperature and humidity. Hot and humid is the process accelerant, cold and dry cures slower. Assuming Hungarian is your native language, kudos to you also for your superb command of English. Egészségére!*

This was a very well made video and you seem like a sharp guy. I always appreciate clear instructions, explanations for things, and examples, which you all touched on.

An interesting solution! Nicely done, man :) Keep us updated on how it holds up.

Very cool, I will attempt this before replacing my mounts

I done this 20 years ago and have also machine urethane in a late to make my own. Only thing to be careful of is going too much on daily driven cars. I fine starting by taping off one side and fill 50% is a good start

I've been doing this for years & it truly works & I haven't replaced a mount in ages. Rubber isn't like it used to be & it's expensive,this is why manufacturers design them with spacings & they're failure point is inevitable so you have to buy replacements. Great job to keep your wheels rolling 👍

Wow quick fix and inexpensive repair it’s better than a rattle or broken mount 👍 great job 👏

Man... You done so well... Thanks so much for your experience...

I started to laugh when I started to play this but now I apolagise to you Ollari and praise you on showing us thick people some common sence 👏👍

Hola; perfect. Thank you. Best wishes to you from Río Cuarto, Córdoba, República Argentina.

Thank you for this video, i did the same for motor mount of my car long time back, whenever there is a gap in any bushing you can do the same for strenthing and will last long period.

This works well on my T3 , I did this 3yr ago to good effect.

I use upol tiger sealer as its a PU sealer works really well, And works for a upgrade filling in voids

Nice work .I like the pit.

Nice video with details explained. Thanks

nicely explained, thank you

Nice! I'm considering to try this out, at least as a temporary solution, before ordering an engine mount from overseas.

Great video guvnor

Thanks dude. It saves hundred dollars instead of buying the new one 🤗

Nice! You may have just saved the life of my outboard boat motor.

So I guess the answer to your question is: yes, you can fix it. Hehe I really enjoys watching you fix that old vw

Awesome work man

Very good solution. Thanks.

best video with before - after!!!!

Few years ago a friend used a few thick beads of clear silicone sealant as an anti-vibration damper for the fuel pump of his rally car. Previously the pump had come loose and became unplugged during a stage. The bead was straight out the tube without the long nozzle.

I like the idea, thank you for interesting video!

Incredible solution. It will be interesting to see if it holds up to the constant vibration and torque

Thanks a good idea and a well done video

Great idea! Would be interesting to see how it holds up. Keep up the good work!

Smart, thanks for sharing.

The toughest and most durable type of caulking rubber I've ever used is 3M 5200. It's rated to use under the waterline in marine applications. You can get it at marine stores or sometimes home depot, etc. It would probably be close to the original rubber used in the mount.

Hey mate- that’s absolutely creative! BUT, I believe that the manufacture made it in a certain way where it moves and has some flexibility. Just imagine when filling it all with that thing, it will barely move and the vibration will move to other components of the vehicle which on the other side will cause a metal to metal tough contact such as the interior axles which then will shorten the life span of them! I believe that we need that flexibility which transfers vibrations gradually! That’s my point of view sir Good luck!

Great idea, wondering why I don't get your notifications. Cheers.

MUY BUENO el antes y el despues..!

awesome...keep it up

I myself learned and used polyurethane caulk to fix engine mounts. 👍🏻❤️💪🏼🤣

Thanks for helping us save money...

Nice hack Seb !

Brillant idea. How about vibration in the cabin? Has it reduce too?

Thank you sir 👍

How stiff is it when compared to an OEM mount?

good job! innovation!

I’ve done this my old man showed me it. Just as good as a new mount if you let it set

*t* his is really a fantastic work sir . thank you so much 🙂

Yes, you can do it the cheap way or the expensive way the time will show.I bought just the safe way.is not so expensive. so good luck and more creative thoughts.HCS.

this is very usefulll thank you

Hey, thanks so much for the tip, gonna give it a try could potentially save me some much needed money👍,subscribed

Awesome!

Hi, great video.... is this sealant the one it used for windscreen.. cannot find that brand in Australia. So just trying to understand if can use another brand. Thank you 😊

Something I found that also works is the flex seal glue..

Awesomely done 😃

Brilliant video thx😎 Did it cause any vibration?

For 15yers now,to all cars that i hade,i bought new engine and transmission mounts,and to yha model that it eas possible,ive fill them with black silicone,since they was new. It dose make the car seem tighter. Yo only one car one Dacia Logan,witch i filed all the rubber mounts,i hade a vibration over 3000rpm. But on the Mercedes CLK 320 Petrol,on witch i did only the transmission mount,was perfect.

Hey i have just subscribed! Thanks for your videos. I am getting a 1987 double cab this week. It has 1900cc engine. Petrol and water cooled. I am inspired by your vids. By the way i am from Israel. Where are you from? I here an accent... maybe russian?🤔 any how thanks for your vids! Keep them coming.😁

Muito bom parabéns

I been doing this for real

Just done mine today, i degreased the rubber inside, let it dry very well and filled it with wurth windscreen sealant. I did it so well that it almost looks factory lol. Was very careful with it

Excelente 👌

So what Durometer rating that window sealant is rated? 60A, 65A, 70A or 80A?

thanks

That's all have nice day

If it is cracked, can the top layer be patched?

any kind of vibrations?

what is the black stuff called you applied

Thank You!!!@

Hola disculpa cuánto tiempo tiene que dejar secar el silicón? Saludos desde México ❤

It will cost me $700-800 for just one mount and no parts available.Damn!....I might try this too!!

why not clean the mount and press in something with the diameter? More standard bushing thats readily available?

That's exactly what I'm gonna do

Good morning. I have a 2006 Honda Pilot and I have a strange vibration setting in at higher highway speeds. Around 75-80 mph (120-130 kph) and settling out higher. It is intermittent. Someone told me to try new motor mounts. Since the problem is intermittent and seems to be related to load on acceleration as well as at constant speed. Problem is, I think that spending upwards of $500 plus on motor and transmission mounts is a waste. I have heard that aftermarket mounts aren't very good, so I am going to try this. Thank you in advance for the video. Will this restore teh movement to original or make it stiffer. This looks like the 3M poly sealant avilable int he US, but I don't know. There seems to be some give in the mount. Is that true? if so, that might be the thing to do. Thanks again.

How much of the silicone did you use? A whole container?

Is it still holding on?

is this just normal sealant?

How is the condition of this thing now after 2 years of this video production?

Thats a fuckin idea . thanx man

its strong?or like rubber? for engine mounting is good?thanks

How long does this last for ?

$175 for a motor mount if that works I'm gonna try it thanks brother So what did you use a poxy plastic filler

Hi how is it going ten months later, I am finding difficulty in finding my car part.

You can!

Hey! How's it holding?

🤩✨

why not?you can use that. but how long does it last?

It make some cabin noise?

It's been 2 Years now, how long did it last ?

ممتاز

how many days to get it dry?

How is the mount doing after 11 months?

Ye to bahot bada g lagta hai

hello im your new subscriber, take a look of this 21810-1R000 ( my engine mount parts number ) can i use the same thing you did on your mount? i wanna save my money thank you for your response

It is a good video , only ... audio too low .

Its past 10 months. Is it still keeping up tight or what...? Thanks

hey Ollari. Im from Turkey. today 10. months. How is going doo doo parts ^_~? give me after result

thank you brother

Not when I break them

Издэц у тебя англицский вэри гуд😅

This isn't the best product. The only long lasting quality method is to use 2 part polyurethane casting resin.