Canon Pixma Mega Tank G6020 - HOW TO CLEAN Color/Black Printheads - Not Printing FIXED

Подписаться 55 тыс.

Просмотров 111 тыс.

50% 1

Printhead Cleaning Kit (CLICK HERE TO BUY!): geni.us/wArXsZT
Canon GI-20 Ink Bottle: geni.us/fFUG3FW
Canon PIXMA G602: geni.us/canong6020
Support Website: bestprinterstech.com
Disclaimer
Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.
Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.
All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!
® 2024 Best Printers LLC

Хобби

Опубликовано:

2 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 229

@darcie56 2 года назад

This kit works ! Saved my Cannon 6020. The kit is worth every penny. Thank you !

@BestPrinters 2 года назад

Awesome!

@suzannex3414 Год назад

This worked on my Canon G6020. My initial nozzle check showed nothing on the cyan and yellow lines. I used a little less than half a bottle of the cleaning fluid on those two colours, and then I ran another nozzle check. This one showed a very faint cyan and yellow and no magenta (I had not run any fluid through magenta). After running a cleaning and deep cleaning, a third nozzle check showed a slight improvement on the cyan. So I did the ink flush. Although it did use a lot of ink, it didn't use as much ink as I had thought it would. A fourth nozzle check shows all colours back to normal. I'm very happy to have found this video and to have saved myself the cost of a new printer and ink!

@lathersforlife7389 10 месяцев назад

Thank you. I just purchased the kit at your recommendation. Your video is user-friendly, and I appreciate it. I hope it goes well. I have confidence I can do this. I need my printer to work for soap label AND mailing labels. I didn't expect my printer to just stop printing this morning when there is still lots of ink left...

@user-pt1xe4vn2p 11 месяцев назад

Thank you for this video. I did not have your cleaning kit available so I used cleaning vinegar and just a syringe. It worked. I went from no yellow or cyan and everything printing in pink back to normal. THANK YOU

@tomhuster4700 2 года назад

Thank you! Huge help to restoring print quality!

@BestPrinters 2 года назад

Awesome!!

@bill1772 2 года назад

Thank you, I did NOT know I could grab the sliding head; I just watched it go back and forth. Great informative video Brandon

@BestPrinters 2 года назад

You're welcome!

@Lauren-tk1gq 2 года назад

Thank you so much for making this video! I never have been technology savvy. I just purchased the cleaning kit in hopes of fixing the awful printing of the inks

@BestPrinters 2 года назад

Awesome, let me know how it goes!

@mijolobo Год назад

Happy New Year and thank you for this guide! I have a Canon Pixma G5020 and it was bothering me that there didn't appear to be anything about this printer on RU-vid after finding my colors weren't printing. I realized this video was close enough to pay attention to it. Ordered the Printhead Cleaning Kit and followed the steps only to learn I needed to perform the Ink Flush. Originally thought I was going to have to wait anywhere from the 6th till the 9th this month when surprised Amazon told me it was coming NYE! It did, yay! Just filled the tanks, ran the Ink Flush, and back in business. Thank you!

@BestPrinters Год назад

That is great news, thank you for sharing!

@Bonjour-World 2 года назад

That "Ink FlusH" fills up the waste pad(s). How do you replace them and reset the counter on this printer?

@Grannyrides Год назад

Many thanks! Was ready to toss the printer out the window but this works and it prints like new.

@carsonmcnamer5321 4 года назад

Thanks! Really helps

@rociovazquez6766 9 месяцев назад

Thank you!! I run an art business and this was so helpful!! 🙌🏼

@BestPrinters 9 месяцев назад

You're so welcome!

@vincentdo4967 Месяц назад

Very nice instructions. Thank you!

@BestPrinters Месяц назад

You are so welcome!

@starrsong3432 3 года назад

thank you! really helps

@lapinott 3 года назад

Hi! To stop the cartridge, i think it's better not to 'hand it', but just push 'STOP' button 5 secondes and the cartridge will come to center and stop alone. ;) Have a good day! :)

@zakslife17 8 месяцев назад

Thanks so much! Just saved my printer 🎉

@tieshahenson2460 Год назад

Thank you so much, this was a very helpful video!!!!

@nickditoro 2 года назад

Thank you so much for this video. I went from having no black results at all in a nozzle check to printing like new!

@BestPrinters 2 года назад

Happy to hear that! Consider leaving a 5 star review on Amazon and subscribing to my channel

@rparker120 4 года назад

Just made an order!

@BestPrinters 2 года назад

Awesome!

@ilonaramazanova6940 9 месяцев назад

Thanks! I had to do an ink flush afterwards, but now the colors are good as new.

@BestPrinters 9 месяцев назад

Welcome!

@BobCindyL 3 года назад

Thank you very much.

@BestPrinters 3 года назад

You're welcome!

@TallyTechandTroubleshooting 2 месяца назад

Product worked flawlessly on one of my customers' printer (print head was nicely cleaned out). Unfortunately, I had a feeling there was a bigger issue that has been the topic on many tech repair forums involving this Canon printer. Black ink was not being drawn to through the distribution tube. After closer inspection, air bubbles were evident. I will be keeping a couple of these in my inventory for the future though. Great product and excellent walk-through, my brother! Take care!!

@BestPrinters 2 месяца назад

I'm glad this video was a good resource to you!

@toyotavizio4023 2 года назад

Good Job. Thanks.

@BestPrinters 2 года назад

Thanks for watching! Consider leaving a 5 star review on Amazon and subscribing to my channel.

@lutherkindle5799 3 года назад

Very good prevention, thinking of buying this printer, but would like to know if it will print cds ? Thanks for being so helpful,

@anggiasibuea6051 2 года назад

Thank you.

@BestPrinters 2 года назад

You're welcome!

@ankaraguclufotografci Год назад

Thanks for this video 👍👍

@BestPrinters Год назад

Welcome 😊

@surfyogi 2 месяца назад

Great video! Thanks for showing us how it's done. I guess I'll check my ink sponge in the back and dry it out too, after doing this? I would think this will just completely saturate the ink drain sponge? I keep alchohol and large syringes around, just for these fing printers, what a pain. My last canon only lasted 6 years, with carts, my moms even less time. I kept it limping along, but it seems they are NOT DESIGNED TO LAST, and that's how Canon wants it. I hope these new printers end up better; my G6020 is completely clogged after 2.5 years, deep cleaning does nothing for it; of course I rarely use it.. which is why there is a problem.

@BestPrinters 2 месяца назад

If I could guess I believe these companies are gonna keep making printers that become obsolete sooner. That's how they make their money.

@JaneDSeyz 9 месяцев назад

💯Best thanks so much - video helpful, thorough and well done!!!

@BestPrinters 9 месяцев назад

You're very welcome!

@kevingiocanti8801 3 года назад

This is really a good method, but in the end all the ink that has been used is there a recovery tank to empty which is filled with the used ink? If so is where? (sorry if the translation is approximate I don't speak English)

@donethen7984 3 года назад

Brandon, I did the whole flush, even did the Ink Flush in Maintenance. The BLACK seems to be problematic. I feel that the black tank needs black ink. However, an odd problem: The ink from the bottle will NOT FLOW into the black tank. I did a dipstick analysis and the tank is almost empty but hard to see when ink has been in there for a while. Can you shed some light on why an ink bottle will not flow its ink into the black tank? thank you.

@BestPrinters 3 года назад

Best Printer's Cleaning Kit: geni.us/wArXsZT

@drewsam6387 3 года назад

a tip: watch series at Kaldrostream. Me and my gf have been using it for watching all kinds of movies recently.

@diegokeegan5420 3 года назад

@Drew Sam yup, been watching on kaldroStream for since december myself :D

@mjfloyd765 2 года назад

this product worked the first time i used it for my canon g6020 black printhead and i did not do ink flush afterward

@mariasolis7311 4 года назад

Hi I need to know if you can help me how to adjust the colors on mega tank because the red is not too red and the purple is blue and it is new printer can you help me please ??

@StDebb Год назад

This process works well for me, but is there a way to get just the cleaning solution? I don't need to buy the whole kit every time I run out of solution!

@user-rt3eb4oh2c 5 месяцев назад

Thanks for this helpful link. I'm curious to know where the ink used during a flush ends up.

@BestPrinters 5 месяцев назад

Hi, it ends up in a waste pad located within the printer.

@vilmachavez7807 3 года назад

Hi, can you help me out a cannon G6010. An error reads" something like" close the ink valve and reinstall the print head". The paper also stops feeding all the way ver frequently. Thx!

@d_dubya44 3 года назад

I have been scouring the internet for an at home solution to my canon pixma g1200. Error says something about tank overfill??? This happened after doing a session of cleaning and clearing. Now I can’t attempt anything through my computer to resolve. Is it possible to manually fix this issue at home?

@rabnesbit Год назад

Very helpful. I understand why you might not want to share what is in the cleaning fluid but I applied a bit too much pressure and the tube came out and I got sprayed with the stuff so I would like to know if it is harmful.

@BestPrinters Год назад

No it is not harmful just wash it off. I have submitted a sds sheet to Amazon. If you message me via Amazon I can send one over to you. The solution is water based.

@jenniferfletcher5425 9 месяцев назад

Your ink tubes have air in them though. So that is going to give you another issue. So if my black is causing smudges on the paper is this what I should do? I see that there are sponges in the printer, do those need to be cleaned as well?

@grikor1 Год назад

Will this reset the waste ink count?

@phylwags Год назад

I followed these directions but must have done something wrong since the colors are still very light and the quality of my photos I've printed are awful. An advice? Should I have used a full bottle of cleaning solution on every color?

@Diamondbittersweet Год назад

Hi Brandon. I watched your video om cleaning the nozzle heads on the ink cartridges, but you also mentioned flushing. Do you recommend running a nozzle check after cleaning out the dried ink? Is flushing also necessary after completing the nozzle head cleaning? Lastly, where does the ink go during the flushing process? Does it empty out of the printer?

@BestPrinters Год назад

Yes an ink flush will only help and the ink will go into a ink waste padl.

@melbendigo 4 года назад

Very helpful! Thanks! Why do you need to use Ink Flush if you'd already flushed out the print heads with the solution? In the past after cleaning with a solution, I would just print a page of solid color to clean out the remaining solution, and it used much less ink and didn't add ink to the internal ink pads.

@BestPrinters 2 года назад

When you run a printhead cleaning its just to have the ink pushed back into the system.

@melbendigo 2 года назад

@@BestPrinters I see, thanks! In that case, it's probably just as good to print solid pages of each color, so as not to fill the waste reservoir.

@denahom Год назад

@@melbendigo This sounds like a better idea. How did you print out solid pages of each color?

@melbendigo Год назад

@@denahom Dena, I just saw your message, sorry so long to respond! Just open an image editing program (Photoshop, Gimp, etc.) and make an 8.5"x11" document, draw a box that fills to the margins and fill it with 100% of whichever color you want to print. Always leave a margin, 1/4" or so, to make sure ink doesn't get on your rollers.

@GaryWold 3 года назад

Hey Brandon, what are your thoughts on Epson vs. Canon with regard to the Waste ink sponge servicing and reset. I'm drawn to the Canon G7020 but I its my understanding that you cant service this yourself on the Canon.

@Roadsurfer2k11 2 года назад

What printer did you get? I was eyeing ecotank 3850 before seeing the g6020. Did you replace pads? I'm getting a 4 year store warranty and not dealing with this. I've had no problems even at bestbuy getting an newer improved headset at no extra cost because former headset was discontinued

@travelgirl3172 2 года назад

Thank you for this. I hate this printer. I have a 10 yr old canon at home and it still works well. We got this model for work and it clogs ALL THE TIME. Probably because it doesn't get used that much. I will never ever buy a printer with ink like this again. I had one years ago at another job and it was a constant battle as well. Can't remember the brand. I'd rather pay through the nose for ink cartridges than deal with this every time I want to print something! Great tutorial. Thanks again.

@no_peace 2 года назад

I have it too and I will never buy a tank printer again. I hate it so much. The prints have never looked good and all it gives me is trouble

@keith3025 2 года назад

thanks for you video , i'm not sure this all worked for me, my system didn't print a nozzle check so i did clean each driver , and found the black was clogged, however i ran out of cleaning solution i will buy one more cleaning kit , my problem started by printing all blank sheets and for me thats frustrating because i'm wasn't sure where to start, I like the g6020 but I'm willing to have separate printers for each computer so i;d be willing to hear your ideas on a new printer for my mac , of course the g6020 is fairly new and i would like to clean it or just replace the drivers , we bought that one last year on amazon and print coupons with a HP with a terra bit to print coupons sadly to go to the grocery store.!

@BestPrinters 2 года назад

Hi Keith, after using the kit focus on running a printhead cleaning over and over until the color comes back 100%. Also keep your ink full during the whole process.

@choscheit Год назад

I can't get the ink bottle to flow into the tank. I've cleaned the bottle top and the top of the tank, but the ink will not go into the tank. Directions say to have printer on, and I've done that. Now what? I've ordered you suggested cleaner, and will be attempting to clean heads, But if I can't fill the tanks, what do I do?

@waynesevin7374 Год назад

I am learning here! Where does the ink go after the flush? Is there something I need to change after this step?

@BestPrinters Год назад

The ink will go to the maintenance box ( an ink pad absorber).

@jackcotlar1594 4 года назад

Nice presentation. On Pixma G3200 how do I get the carriage to be stationed in the middle for access?

@dougmann777 4 года назад

Hold down the Stop key for an 8 count, twice.

@jackcotlar1594 4 года назад

@@dougmann777 Thank you (belatedly)

@janetharris9291 6 месяцев назад

The epson tank printers are being purchased by the crafting community to use sublimation ink. Please talk about that. Will that ink damage the printer

@BestPrinters 6 месяцев назад

No it wont unless you arent doing frequent maintenance.

@joeshmoe5935 2 года назад

Thanks for informing us. I plan on trying this kit. I'd like to point, I went to the cannon video on changing printheads and am wondering (A.) why don't you use their procedure to park the heads via the maintenance menu so we can pull out the print heads? Does this start some kind of a counter so that if old heads are returned the system will not want to work? (B.) the receptacle in the printer that accepts the waste ink from the purging and the cleaning and all that. When do we have to start worrying about that. Before I got to your video, I tried so many cleaning and purging cycles and what not to no avail, now I am worrying if I have that thing filled. Thanks for all the help.

@BestPrinters 2 года назад

Hi, I have always done my own method for stopping the printhead. I was not aware Canon had a video like that, I wouldnt be opposed to doing it their way. Also once the waste ink pads fill up you will be notified as to you replacing it. I hope this helps!

@joeshmoe5935 2 года назад

@@BestPrinters got tips on how to remove air from lines when they start getting empty. I see all the Hindu and Tagalog and Indonesian videos on how to do it, but they tell you to apply lock when sucking the ink. Don't get it.

@sinvaldogomes139 3 года назад

Como fazer Dispenser Canon 6010?

@donnellabuxton3709 4 месяца назад

Thank you the only thing I don't like is the ink flash as every time this is done you then end up with other issue as the sponge in back of the tank gets full and then it cause another major issue. These printers are full of issue. Cannon need to change modify these printers with ink emptying tanks too not a sponge.

@bananza1310 2 года назад

Hi there! I have a fairly new Canon Pixma G6020, but it's only printing with the red ink. Any advice?? Thanks so much!!

@BestPrinters 2 года назад

Yes you will want to clean the printhead, like I did in this video.

@djdsk Год назад

Thank you your kit and method fixed my Pixma G6050, i wanted to ask where does the ink go during an ink flush? Do we need to empty a resevoir or anything?

@BestPrinters Год назад

No need, it goes into an ink waste pad.

@djdsk Год назад

@@BestPrinters does that waste pad need replacing?

@Mix-gx5ps Год назад

Hello, this is a great video and I'm anxious to try it, however I can't seem to find a kit that specifically calls out the G6020. I'm worried that the hoses aren't going to fit as a result. Are you aware of any kits that are available at this time that will work with the G6020?

@BestPrinters Год назад

Yes the kit in this video is compatible with the G6020. I have used it myself.

@dseyna Год назад

Thanks very much@@BestPrinters for your quick response, I appreciate it. Based on your advice, I'll give it a go.

@randakhoury8366 8 месяцев назад

Great video Thank you My printer Canon G3062 error code 5100 Please help Thank you Randa

@BestPrinters 7 месяцев назад

Hi Randa, with error code 5100 please ensure that there isnt anything jammed within the printer.

@tracyvass742 6 месяцев назад

Can your cleaning solution be used with edible image priters?

@BestPrinters 6 месяцев назад

Yes, absolutely

@adamszwarc56 Год назад

Hi, just bought your print head cleaning kit, however, the color print head is not getting any ink from the color reservoir. How does the ink get pumped to the print head?

@BestPrinters Год назад

By running a printhead cleaning, that will push the ink back into the system.

@annanderson4262 2 месяца назад

I've got a g7020 and there's no. Ink flush in the maintenance section on the printer tools what next?💙

@BestPrinters 2 месяца назад

It may be titled something else on your printer you will need to look it up.

@omarperez9121 Год назад

Hello, great video. Can I do that if edible ink?

@BestPrinters Год назад

Not reccomended.

@christinecobb2831 Год назад

Does the ink flush pool up somewhere that needs to be emptied? Did you fill the tanks on top of whatever old ink was already in them, or drain those out somehow first?

@BestPrinters Год назад

Yes you just need to refill the yanks with new ink, no need to take out the old.

@Bertminator Год назад

This kind of confirms for me that laser is the way to go. They won't dry up because toner is already dry

@BestPrinters Год назад

True!

@rozettepeckham1157 Год назад

Thanks. So I am not sure what to do after cleaning the print heads. You mention ink flush and then it looks like video was edited and you mention, cleaning, deep cleaning and then ink flush. So do I clean and deep clean after I use the cleaning kit or do I automatically do ink flush after cleaning the print heads with the kit?

@BestPrinters 11 месяцев назад

Yes do an ink flush right after the kit cleaning.

@choscheit Год назад

I have followed your directions, it prints in double letters. It's hard to read the pages. I've followed everything, except to use the cleaning kit. I did buy it and ready. But, I'm 70 yrs old, and afraid to try more. I have used the cleaning settings & the full flush. Still hard to read printing, its double printing on each letter being printed. usC000 code. What now?

@BornAgainCynic0086 Год назад

If the tubes/pipes are empty just run the IJ Printer Assistant Tool Ink Flush application.

@BestPrinters Год назад

@MagdaLena-ph4pp Год назад

Hi , I did everything from your video to clean the printer, but on the and I’m not sure of the steps ? So I did clean manually with cleaner kit ✅ and then with I understood from your video on the and I did ink flash and nozzle check✅ but you are talking something and deep cleaning and cleaning, I’m not sure if I should add this to the process. Please make sure on the and of video you are slowly describe the steps with showing what to click on the screen the printer, it was confusing. And after the process you show on the video my check print page looks the same 🤔 and idea what I did wrong ?

@MySaturdayCreations4575 Год назад

I recently purchased my Canon pixma 7020 (a month ago) and its print is kinda faded and dull. I’s very frustrating! Would this cleaning product help me?

@BestPrinters Год назад

Yes, definitely

@sophieliu7749 Год назад

What about gx6020. Is there a similar video

@BestPrinters Год назад

It would be the same process.

@GrabberBlue5.2 Год назад

does the G6020 have a replaceable maintenance cartridge?

@BestPrinters Год назад

It doesnt.

@claudepiche2384 Год назад

I have a Canon G6020 but the tube for Color are block. I don’t see any ink in the tube and the reservoir are full. Thanks

@BestPrinters Год назад

You can run a power cleaning/ Printhead cleaning to get the ink back into the system.

@follow_your_dream_goals 2 года назад

I just bought this printer a few days ago and it prints lines across horizontally only at the beginning can you help please

@BestPrinters 2 года назад

Yes you will want to do a printhead cleaning witht he bp cleaning kit.

@nicolinavincelli9369 Месяц назад

Hello, I did try "how to clean the printheads" and did not work, I did all the test I was told to do, nozzle, deep cleaning etc, It filled my maintenance cartridge twice and now I have to wait to get another maintenance cartridge. I received a phone call from Canon today and now they are sending me another printer, oh wow. I print a lot and I am not sure this is the printer for me, not even a year old and I have already printed 7350 pages. I not sure what brand is best, so confusing. Apparently the printheads are gone, to replace them is very expensive and very hard to find, I own a Canon G 2270.

@user-nk8fd6co8g Год назад

How long does it take for the print heads to dry? The box says wait 24 hours but your video did not mention the amount of time.

@BestPrinters Год назад

Yes let it dry for 24 hours.

@roymariano7116 3 года назад

what is the cleaning solution made of ? is it water based or hydrocarbon or other solvent based ? Could you please provide a link to the cleaning solution's MSDS. Thanks

@BestPrinters 3 года назад

Please contact Best Printers through Amazon for MSDS.

@Roadsurfer2k11 2 года назад

3 drops dish soap, 4 teaspoons ipa from drug store mixed in some deionized water ($1 a gallon). We already get ripped off by the printer manufacturers ($165 for an epson ecotank maxify print head??) Cost them $10 in China or Vietnam to manufacture

@joeshmoe5935 2 года назад

Thanks. I hope this is what it takes to take care of error 5200. I was trying to print a 100 page pdf and black ink starts to die. When run nozzle check black no longer prints. Hope this is it.

@BestPrinters 2 года назад

This should bring back your black color.

@joeshmoe5935 2 года назад

@@BestPrinters didn't work. flushed it with solution until it all came out clear. jus the black then ran ink flush to fill up the tubes. ran nozzle check and no black. Now when I unhook the cartridges the black tube seems to remain full. Only the color ones seem to empty and fill with air. Does that tell you something?

@joeshmoe5935 2 года назад

@@BestPrinters solvent didn't do it. dipped print head in very hot distilled water, flushed it with more of teh same. water came out clean and clear. ran ink flush and still nozzle check no black print. Tubes in the printer are full. and ten minutes later 5B00

@ttwotees 6 месяцев назад

My Canon G7020 mega tank printer only prints yellow when it should be printing other colors,

@BestPrinters 6 месяцев назад

Yes it needs this cleaning.

@Kenlydford 3 месяца назад

I honestly rarely use color but after a year and a half of printing black only, the colors look to be full until the nozzle check it’s looks almost as bad as the black. Is this just because I don’t use it that often and can I just add black to fix my faded black problem?

@BestPrinters 3 месяца назад

It is most likely because you don't use color. The cleaning kit should help.

@Kenlydford 3 месяца назад

@@BestPrinters yep, that was my guess. Thanks.

@Whodatt999 Год назад

Where does all that ink go? All the ink used in a flush? Do I need to find it and dump it out?

@melbendigo Год назад

Any tips for seeing how full the black tank is? The ink on the sides makes it always look full. I tried shining a light through it, but it's too opaque. Thanks!

@emilytetreault2516 Год назад

It might just be full! I don't know how long you've had the printer for/how much you print, but I'm 600 pages in and I've used less than a quarter of each tank, and I can easily see the black levels.

@melbendigo Год назад

@@emilytetreault2516 Thanks, Emily! I've had the printer for a while and it always looks full. I have to peek in from the top to see how full it is. Oh well, as long as it keeps printing! ;)

@XellosMetallium 7 месяцев назад

Can you show us the waste ink tube? I just need to route it to a reservoir

@BestPrinters 7 месяцев назад

There isnt tubing , the system works with a pad. The pad collects the wasted ink.

@XellosMetallium 6 месяцев назад

i figure it out, for the g6020 model the tubes are on the right side of the printer. instead of taking the whole thing apart i drill and cut to expose the tubes and reroute them into a larger printer ink resevoir. Now everytime I flush the ink it goes into the tank instead of dumping it onto the pad sitting below the printer.@@BestPrinters

@denisehenson6116 Год назад

My ink tanks are completely full now. My printing is super faded. Can I still clean the cartridge??

@BestPrinters Год назад

Yes

@emilybruening7923 2 года назад

What do you do if the flush is not coming out the bottom? Let it soak?

@BestPrinters 2 года назад

Use paper towel and swap it with dry paper towel if the first one gets soaked. I hope this helps.

@kevinlavin6633 Год назад

Thank, great video! ***QUESTION*** I am looking to purchase this printer (classifieds - never used, but half the price vs retailer and tanks were filled by owner). I am going to be using this for sublimation with sublimation ink, but I need the existing ink GONE from those tanks. Will the Ink Flush get rid of all of the ink? Or is there a lot of residual still in there? If there is, is there a way to flush the rest out or even remove those tanks so I can syringe-wash by hand? I can't have any remaining 'regular' ink in there. And if you don't know, that's perfectly fine, I just can't seem to find a straight answer online!

@BestPrinters Год назад

Hi Kevin, there is no easy way to perform this ink clearing. The ink flush will still leave quite a bit of regular ink in the system.

@kevinlavin6633 Год назад

@@BestPrinters I kind of figured that. Hey, thanks so much for replying, I really appreciate it! Keep up the great work!

@cesarsomarriba2944 Год назад

Hi I have a bigger problem my daughter filled up the blue tank with black ink. Of course printer it's not using it. How I can remove and clean the blue thank filled with black ink?

@BestPrinters Год назад

You will need to use the metal tubing that comes with the kit to remove the incorrect ink.

@ebravo31497 3 года назад

What if one color doesn’t appear at all on your nozzle check?

@BestPrinters 2 года назад

Repeat the process.

@KickAssets Год назад

Ink flush is such a scam. They charge a fortune for ink and each flush takes so much. What a scam. These companies really piss me off.

@BestPrinters Год назад

I know.

@crystalkniffen4846 Год назад

I use my G6020 for edible printing with edible ink & paper. Is this cleaning solution safe to eat?

@BestPrinters Год назад

No, dont eat it.

@jeffschlumpf1753 3 года назад

I have a Canon G1200 and the waste ink pads are full. Canon says it's not serviceable. Are there any ink tank printers that have replaceable waste pads?

@radellaf 3 года назад

I hear that a user replaceable waste pad cartridge is a new feature on the G3260 and similar generation (dec 2020) megatank printers.

@d_dubya44 3 года назад

Jeff- i am having issues with mine too, error says something about tank overfill 🤷🏼‍♀️

@sotddrc.3372 4 года назад

Can you show me the waste ink box or absorber?

@BrendaMcG 3 года назад

good question

@Roadsurfer2k11 2 года назад

So many asked this question and printer guy didn't answer 🤔 smallbusiness.chron.com/clean-canon-ink-absorber-57609.html

@PaulHoyle777 Год назад

Is it easier to buy some new print heads?

@BestPrinters Год назад

In some cases yes.

@mikejw58 2 года назад

OMG. I just bought one of these. What did I get myself into. UGH

@BestPrinters 2 года назад

Sorry

@AppleUser 2 года назад

Great video, but..... how do I clean the waste ink pad???????

@BestPrinters 2 года назад

It needs to be replaced actually.

@AppleUser 2 года назад

@@BestPrinters how? Where can I buy new pads?

@Roadsurfer2k11 2 года назад

Yeah answer this guy's question... Pretty sure if I buy this printer from bestbuy I'll pay the extra $60 for 4 years of warranty and let them deal with it. Any code that pops up I either get the money back or replacement as I've done 3x before

@bubbita23 Год назад

Can this cleaning product be used on an edible printer?

@BestPrinters Год назад

Yes, absolutely.

@mysteriousgamer5193 3 года назад

My kid added a wrong color ink in the wrong category. How do I clean the ink tank out?????

@okaybenji 2 года назад

Unfortunately, Canon does not make this very easy. You may be able to use an ink syringe to extract most of the ink from the tank, then refill with the correct color, although it could take a lot of prints before the color starts looking normal again. Also not sure if you'd want to do this, but possibly put some solution in the tank, swirl it around, then extract with a syringe (to get it cleaner before adding the correct ink). 4 x 10ml Syringe with Blunt 4" Long Needle to Glue Craft, Refill Ink Cartridge CISS with 4 Different Color Cups