CANSMART PROGRAMMING / FIRMWARE UPGRADE 

just what I needed to see as I do not posses a laptop. Very clear and informative.

I asked in another of your vids why i nneded one of these. Well, you have convinced me that I do need this. Thank you.

Excellent, very informative and explained in layman's terms. Unfortunately, I've only now 'stumbled' across you after ordering my Denali kit from somewhere else!

I just installed the denali cansmart yesterday, will be doing the programming today.

Great video!! I am putting my can smart in today and searched RU-vid for how to program. Your video really helped, thank you!!

Thanks for your helpful videos. Added CanSmart to my 1200GS today: The ring that goes on the red battery screw had heat shrink too long, down under the screw and adjacent ring terminal: electricians are not allowed to have any wire insulation under the switch and receptacle screw heads for good reason. I trimmed mine on both sides of the ring. Buy and store an extra 30 micro fuse or two to carry on your trips. The long "horn" cord can also feed insulated 1/4" spades crimped onto lights with just two wires, headlights or rear lights. The CanSmart can majcally dim these as well, maybe just 50%. Denali sells a pigtail that goes in/onto its 3 wire connectors so you can solder or crimp on a wide variety of your 12 volt things or just waterproof an open ended connector (be sure to insulate each tail separately). They don't sell the microUSB waterproof plug, but my pigtail order requested one too. Hope this helps some.

My friend who will likely install my Denali lights sent me this video to watch. Even though I will likely leave it to him, I now better understand the programming. Thanks.

Thank`s Steve for a very informative and simple instructionvideo 😃👍 Sheers from Sweden

I really liked this one! Gave me the idea to start configureing just now, before mounting on the bike :)

Thanks for your videos. They gave me the confidence to buy my controller and lights, and be able to do the work by myself. Didn't buy from you as I am in another geo, but be sure your good work is appreciated around the world.

Love the option to add a 0.25 sec delay to soundbomb and light strobe. Means I can use oem horn to toot thanks and goodbye without the embarrassing loud soundbomb sounding everytime.

Thank you for the information, it's nice to be reminded how simple the CS is to update. Enjoy your trip.

Really informative. Thanks for all the quality content. Loving my D4’s

Hi, Ive just purchased a CANsmart from you. I have watched many of your videos, and can see your installations are very neat, which I like. Can I offer a tip to make them even better? When you cut the cable ties off, you use standard wire cutters, that leaves a 'sharp' piece protruding above the buckle, which can cause a nasty cut. At work we used to use Lindstrom 8141 cutters to cut the tie flush with the buckle making a very neat and safe fastening. 👍

Thanks for the info. I already have mine programmed, but nice to know some of the specifics if I want to fine tune mine later.

Makes it a lot clearer.....

Very straight forward, thanks buddy. Have a good trip.

Hi Steve. Great video as usual. I'm looking forward to getting the D3's when you get hold of them. This video is very informative, thank you.

Another good video Steve !

Hi I was hoping you could explain the brake function.More so the sensitivity levels and what they mean when you adjust them for emergency braking and engine braking. It's under more settings.

I like all your videos Steve!

Excellent. I can’t wait to go out in the garage and try some adjustments!

Great content Steve, just rather unfortunate that the manufacturer just caters for BMW and not for other bike.

Now I understand why people sit so far behind me at traffic lights. I have a Denali B6 running/stoplight assembly on my license plate, running at the default setting on my Honda. Always was bright in the garage.

great video :)

What are the settings for flashing 4 times and then solid when braking?

Does it automatically remember those settings after you adjust them or do you have to hit the hamburger next to the yellow triangle and download to cansmart? I adjusted everything then hit that three horizontal line button next to that triangle on the upper right. It had several options and one was download to cansmart so that’s what I hit. It nothing happened.

Awesome

Hi, Steve, love the videos. So much so, i went and bought the Cansmart unit, 2 spotlights, & a rear brake light. All went on without a hitch, but when i try to program it all , i cant get my computer to drop down to apply the settings. i bought a brand new computer to sort it but it doesnt want to know. When i start the bike all the denali lights work, until i get 50 meters down the road, when the denalik stuff turns itself off . Please feel free to call me a twat, but, what am i missing ? Thanks, Alan.

Dumb question, how does the Cansmart know when it is daytime vs night time?

Good Morning Steve .... just about to wire up my D4’s in the configuration that you have just done on this video, As you’ve explained in other videos & I have run the red and white circuit to my D4’s so they can switch off & back on independently with the indicators.... what do you do with the two spare plug ends ? Do Denali supply any blanking caps to cover these two spare plugs to stop water ingress ? Thanks Mark

Videos are very informative, thanks. Have you ever fitted denali lights to an S1000xr? I have a pair of D2 s and cansmart which I keep looking at fitting🙇‍♂️ but not sure the best way to go at it. Any advice would be much appreciated. Enjoy the trip!

I'm always looking forward to it. Recently, the D4 light always flashes. Is the setting method wrong?

Safe travels

Sorry little confused Red circuit white circuit Do you the run 2 cables from cansmart from to either side of the bike? Eg left and right?

Definitely helpful to appreciate the software adjustments. What products did the Norwegian biker order?

Hi Steve. I've just got myself a pair of d7 and also the cansmart. I've managed to set it up as well but I can't seem to make any changes to the intensity of the lights using the wonderwheel on my R1250gs. Is it possible to do so? Could you please help

If I bought a Cansmart for an F850 can I transfer it to a 1200/1250 if I upgrade at a later date?

WHAT'S THE REASON AND/OR BENNEFIT TO ADJUST AMPS?

Hi - what does the 2 wire / 3 wire setting do?

I watched your video a few times, did the install and programmed my D2 2.0 lights as you did. However it doesn't work the way it should. Just purchased from Twisted Throttle and installed. Everything works except: Left turn signal On - Both D2 lights off Right turn signal On - Both D2 lights on Only the D2 on the side with the turn signal on should go off. I have a screen shot, but can't send here. Any idea what I did wrong???

What is the difference between the silver Cansmart 2 and the black one in the videos? I've noticed the programming page is different.

If cansmart regularly has updates to firmware does this mean they should be connected to PC periodically.?

Is there any iPad app for programming the cansmart? It would be great and more useful.

So can I take the cansmart out of my bike and make the upgrade and configuration out of it?