Cargo Drawers For Jeep Cherokee XJ | With a Sleeping Platform for an XJ 

Glad it was helpful!

Thanks for watching!!

Thanks! 👍

Anthony Mills thank you!

@@TheOffRoadCorner your welcome brother thanks for the inspiration I've been looking for good ways a building a drawer system in my XJ and my TJ I appreciate it Bud keep up the good work

Thanks man! thanks for watching

Thanks Dan. I'm hoping this will help me stay organized

Mission Off-Road thank you!

I think used about 1and an half 4’x8’ sheet of 3/4 plywood. You definitely save wood and weight by only use 1 full piece on the Jeeps floor with strips of 3/4” plywood to raise the floor piece up. Possibly even skip the floor piece all together and bring the vertical plywood down to the floor of the jeep. That might be strong enough. Otherwise this setup works pretty well for me.

I'll put a cut list up on my website. its not on there now but will be in the future. I'll let you know when I post the cut list.

Thanks that would be great and I just subscribed to your IG too!!

Ahhhh, I just saw that you have the 2-door version. That's why they fold forward. Back to the drawing board.

If you can find a 2 door the seat brackets are the same as the 4 door XJs.

I’m 72” tall. You should fit just fine

I'm able to sleep comfortably with this setup. I have enough room to roll over or sleep on my side. the pad I have is 72" by 25" wide and 1.5" thick which works to smooth out the step down between the top and the work surface. here a link to the pad I use. amzn.to/33fPnAQ

i'm 6 foot tall

ok this might be as clear as mud but i'll do my best. so the top piece of plywood is 30.75" x 42" the bottom piece of plywood is 34.75" x 42" x 1.25" thick (2 pieces of plywood sandwiched together) the vertical pieces are 8.5" tall and the drawer boxes measure 18.75" x 25.25" x 7" these are all outside dimensions if you need more info send me an email at theoffroadcorner@gmail.com

@@TheOffRoadCorner Thanks so much, awesome design. Im gonna try this weekend.

@@tscharnerfennell5087 no problem. Thanks for watching. one other thing that i'd recommend would be space the drawers up about 1/4" or more from the bottom. My drawers are rubbing the bottom now that i have the drawers are loaded up.