CATCH CAN INSTALL!!! This is how you can do it!!!

Подписаться 149

Просмотров 8 тыс.

50% 1

Catch Can Installation. If you have a turbocharged engine there is a chance of increased pressure build up in your engine. You need a place to vent it so you don't end up blowing out front or rear main seal gaskets. A catch can is just what you need to vent that pressure off.
Here's the Catch Can Kit I used... I got the 10AN.
www.amazon.com/BAGARAATAN-Baf...
RIV Nut Tool KIt
www.amazon.com/AIUITIO-Mandre...
Riv Nut Assortment kit
www.amazon.com/DIVANC-Assortm...

Авто/Мото

Опубликовано:

17 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@javienwalters973 4 месяца назад

Great video ‼️‼️

@BlitzMolinFab 4 месяца назад

Thank you.

@barenekid9695 3 месяца назад

OR run a Large Bore (minimizing flow restrictions is V important... as is Individually venting each valve cover if you have a V engine)) hose... NOT some teeny 1/2" bore piece of Garden hose equivalent) from Breather Vent(s) to exit below the car. A catch can only collects the yuck oils and still vents the ugly gasses to atmosphere. Totally Messing emission anyways.. so why add damaging venting restrictions (there is No longer vacuum assist with that goofy catch can.) and complexity and yet another maintenance item. 🙂

@nathanielmackinnon6738 Месяц назад

Very clean setup. What are you using for a drain plug on your catch can?

@BlitzMolinFab Месяц назад

I added a valve to the can with a lock on it. I think it's in the video. Have not hooked tubing or anything to it yet though. Thanks.

@nathanielmackinnon6738 Месяц назад

Thanks sorry idk how I missed it right at the beginning of the video smh. But thanks again. I have the same catch can an it found away to ravel itself out 🤷🏽‍♂️

@BlitzMolinFab Месяц назад

@@nathanielmackinnon6738 I'll see if I can find the valve I put on it. Here it is off Amazon. (EZ-110) Silver NPT 3/8-18 Thread Size Oil Drain Valve I also have the same one on my fuel tank drain. Maybe try some threadlocker on the drain threads..?

@nathanielmackinnon6738 Месяц назад

@@BlitzMolinFabok thanks a lot! I went to Home Depot and got myself a brass fitting and plug! I did use some thread locker as well thanks again.

@Billy-the-Chi-man 4 месяца назад

On the top connector of the catch can, can you run a splitter to both valve covers and then use the bottom connector as a drain off back to the engine? For instance my timing cover has two fittings on it for a twin turbo return line but I'm only running one turbo so I could run the drain off the catch can to the other one.

@BlitzMolinFab 4 месяца назад

Hmmm. Really good idea! I never thought of that. But if the oil vapor has any fuel or condensation of any kind, you might not want to put that back in your engine. Interesting thought! I also have that same timing cover with one unused port. Don't 100% know...

@Clappedoutprojects 3 месяца назад

You would want a inline filter for that of some sort you wouldn’t want dirt and sludge building up in your timing cover I thought of the same thing going into the oil pan extra drain port

@davntelisha19 3 месяца назад

Just bought mines for my Cadillac Escalade I paid 34 dollars on Amazon cam with everything it’s called evil energy

@BlitzMolinFab 3 месяца назад

Yep. I think that's what mine is. I've also bought lots of AN fittings from Evil.

@Ron_Masterjohn 3 месяца назад

Did you hook it up yet to your Cadillac? If so how’s it working out and how often do you have to empty it?

@Ron_Masterjohn 3 месяца назад

What brand fittings and hose is this? Looks to be good quality? Would it be safe to run from a rear fuel cell under the car and connected to the frame rails? Great video. Thanks

@jamesburgan4448 3 месяца назад

Evil energy on Amazon

@Ron_Masterjohn 3 месяца назад

@@jamesburgan4448 awesome thanks

@BlitzMolinFab 3 месяца назад

Yep, like James said, Evil Energy on Amazon.

@BlitzMolinFab 2 месяца назад

Sorry ...Yes about fuel line question. I ran my supply and return lines like that.

@kevinwest3689 2 месяца назад

You're heading for some trouble with that Elbow and clamp on the Throttle body with boost, sir.

@BlitzMolinFab 2 месяца назад

Yeah I've wondered about that but don't plan on boosting that much. Maybe 6-8 pounds. It's just a fun little street car. No racing. If it blows out I'll change it. What do you suggest? One of those v-band style connectors?

@Geo-ne2zt 2 месяца назад

Talk to much

@BlitzMolinFab 2 месяца назад

Yeah I'm trying to get the hang of it... Haaa!!

@fc7424 3 месяца назад

Vented to atmosphere catch cans are illegal due to emission laws in a lot of states and countries especially on cars built over the the last 30 years or so since emmision laws became more stringent

@BlitzMolinFab 3 месяца назад

Interesting. I'll have to look into that. I put one on my 2016 EcoBoost Mustang, but I put it in line with the PCV. Never gave that a thought. Thanks for the comment.