Evil Energy Oil Catch Can | Unboxing And Assembly Part 1 |

Подписаться 4,8 тыс.

Просмотров 11 тыс.

50% 1

Thanks for stopping by, I appreciate you!
I am glad you chose to watch my channel and my videos. Please consider subscribing to the channel and liking the videos if you found them helpful. Please add any additional info on the matter. We are here to grow together and help each other out.
#mercurygrandmarquis #oilcatchcan #unboxing #howto #lovewhatyoudrive #crownvic #lincolntowncar
THIS VIDEO IS NOT SPONSORED OR PAID FOR BY EVIL ENERGY PRODUCTS, AMAZON OR ANY OTHER AFFILIATES, THIS IS MY OWN PURCHASE FOR THE CHANNEL
Today we are doing Part 1 of a 2 Part video series. We are doing an unboxing video for the Evil Energy Universal Oil Catch Can. We are diving into the box to see what $35 on amazon gets you with this product. We are also going to assemble the catch can before installing it on my 2006 Mercury Grand Marquis. I will be showing you in Part 2 on how to install, hook up and use this oil catch can. Don't Miss Part 2 of the Video for installation how-to. Thanks for watching.
AMAZON LINK TO BUY:
amzn.to/3OyURhX
Parts:
EVIL ENERGY Baffled Oil Catch Can,Oil Separator Catch Can with Breather Filter 300ml Universal Aluminum.
About this item
[Universal]It can be applied to most cars, making sure there's enough room for Installation.
[Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
[Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil.
[Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.
Other Videos:
New Jersey Classic Car Show 2022 Lakewood NJ Ford Dodge Chevrolet Plymouth Pontiac Hot Rod Gasser:
• New Jersey Classic Car...
BEAMTECH LED HEADLIGHTS (H13/9008) UNBOXING:
• MERCURY GRAND MARQUIS ...
TorchBeam LED Install Part 2:
• Mercury Grand Marquis ...
TorchBeam Led Review/Driving Part 3
• Mercury Grand Marquis ...
TorchBeam LED Part 1 Unboxing:
• Torchbeam T2 H13/9008 ...
My 2006 Mercury Grand Marquis LS Walk Around Honest Raw No Edits Review & Intro "The Good Bad Ugly":
• 2006 Mercury Grand Mar...
How to Change Transmission Fluid & Filter (Easy Pan Drop) Mercury Grand Marquis Ford Crown Victoria:
• How to Change Transmis...
Mercury Maintenance:
• Mercury Grand Marquis ...
Mercury Throttle body cleaning:
• 2006 Mercury Grand Mar...
How to install rear sway bar:
• Mercury Grand Marquis ...
Replace front brakes and rotors:
• How To Change Front Ro...
Install Throttle body spacer:
• Mercury Grand Marquis ...
Rear bumper tuck, Panther Body:
• Crown Victoria/Mercury...
A/C Accumulator Replace:
• A/C Accumulator Repla...
Recharge A/C system:
• How to recharge your c...
How To Install Rear Shocks Absorbers:
• HOW TO REPLACE REAR SH...
The Mercury Gets OEM 2003 Lincoln 17 Inch Wheels:
• How to Change Transmis...
WARNING: This video is only for entertainment and information purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. DIY but always think ahead, and remember that every project you try is at YOUR OWN RISK.
Love What You Drive Instagram:
/ lovewhat_youdrive
Love What You Drive Email:
Lovewhatyoudrive28@gmail.com
PLEASE CONSIDER SUBSCRIBING, LOKING, SHARING, COMMENTING
THANK YOU SO MUCH!!

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@MrZYouTube 10 месяцев назад

Thank god you located the correct spot for the steel wool. Another guy was saying to throw the whole thing inside the can

@1964rmcc 5 месяцев назад

Thanks for showing this most reviews are not showing the inside and the steel wool 👍🏿

@LoveWhatYouDrive 5 месяцев назад

Thanks for stopping by! You’re welcome!

@PanzerPlatform Год назад

Right on Art, I wonder how much oil you're going to catch. Lol This will be interesting to follow up on. -Chuck

@LoveWhatYouDrive Год назад

Hey Chuck! We will have a follow up video after the install video and 3 months of driving around and use! Hope you having an awesome summer!

@none4085 8 месяцев назад

Just picked up exact same "catch can" on ebay, total was $17.51 shipped! Got the raw aluminum one.

@LoveWhatYouDrive 8 месяцев назад

Nice, I see same exact product but with no “name” and for cheaper…good for you!

@LoveWhatYouDrive 8 месяцев назад

How do you like it ? Or have you had a chance to use it?

@none4085 8 месяцев назад

@LoveWhatYouDrive Actually, bought it to install on my 98Harley Davidson Fat Boy FLSTF! Quality product, love the look, haven't installed yet but it'll look bad a** when I'm done...

@LoveWhatYouDrive 8 месяцев назад

@none4085 ok cool, never thought about it in terms of motorcycles or other applications…

@none4085 8 месяцев назад

@LoveWhatYouDrive Never thought about using it on a motorcycle either, until I saw a RU-vid video of dude putting it on his Harley Davidson, looked bad a** so I grabbed one for my bike. The ones sold specifically for motorcycles are way too small for my liking!

@pantherwavecrownvics Год назад

On my oil catch can as of right now it is catching gold metal shavings.

@LoveWhatYouDrive Год назад

Interesting! We’ll keep an eye out on what I’ll catch…

@edwinalexander1170 9 месяцев назад

Are we supposed to put steel wool inside canister or inside the oil catch can ?

@LoveWhatYouDrive 9 месяцев назад

Time stamp 10:55 of the video! Thanks for stopping by!

@christopherhale5445 Год назад

I have to agree ..as to why this is needed ? 😮....

@LoveWhatYouDrive Год назад

I’m hoping in 3 months or whenever I can open that thing up and find some gunk or junk that otherwise would be going back into my intake manifold and runners and into the valves…I could be completely wrong or it might do good. Thanks for stopping by!

@GrainGrown 3 месяца назад

I have used a copy of this catch can, and I collected about 2 liters worth of mixture of water/benzin/oil (mostly water) within a year. All that would have either gone into the intake or back into the oil pan. I mostly drive short distances in cold weather. I think these catch cans are good, but they require emptying often. That's why they aren't installed from the factory.

@GrainGrown 3 месяца назад

Why didn't you measure the fittings?

@LoveWhatYouDrive 3 месяца назад

Sometimes I do things backwards

@jakethesnake4971 Год назад

What is the benefit of installing this?

@JNXT_Railroad Год назад

It catches your oil.

@LoveWhatYouDrive Год назад

Hopefully in a couple of months, it’ll be filled with oil and gunk.

@walterbright1396 Год назад

Why? Direct injected General Motors High feature 3.6L definitely could use something like this but for a GM with the 4.6L portal injected engine it’s completely useless. If you are worried about oil volatility switch to a high quality synthetic like Mobil-1 or one of the others with low volatility.

@JNXT_Railroad Год назад

@@LoveWhatYouDrive that was my point. If it is, I think you may have more serious problems as to why so much oil and gunk is getting in there.

@chanoleyva8584 Год назад

@walterbright1396 no catch Cans can have some benefit to port injected engines.

@carlschock6747 Год назад

Says i will show you how to use the brillo pad then throws it back on the table

@LoveWhatYouDrive Год назад

10:39 my man! Thanks for stopping by!

@jwhite6412 9 месяцев назад

I bought a more expensive one; $75.00 evil brand. No directions in the box. For the reason to prevent carbon build up in my intake manifold.

@LoveWhatYouDrive 9 месяцев назад

How is it working out for you? Good results? Here’s the video with a 90 day result of the catch can, thanks for stopping by! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q-mhpMik-hs.htmlsi=BGvGlWjWwHAfsRgc

@ASEWorldClassTech 9 месяцев назад

if its got an oring you dont need teflon tape

@LoveWhatYouDrive 9 месяцев назад

💯…I sometimes overthink and say to myself “better safe than sorry”

@ASEWorldClassTech 9 месяцев назад

Thanks for the video. If it's npt use teflon. If you see an oring your all good. Take care.

@LoveWhatYouDrive 9 месяцев назад

@QuickScopeOmega thanks I appreciate the advice! 🤝🏼

@vincentlee2460 6 месяцев назад

Does the dop stick have an o ring?

@LoveWhatYouDrive 6 месяцев назад

@vincentlee2460 6 месяцев назад

@@LoveWhatYouDrivecan the threaded dip stick cause a leak in negative pressure?

@LoveWhatYouDrive 6 месяцев назад

I haven’t seen anything go wrong up to this point. I’ve already put on about 10k miles and 5.5 months and no issues. When the car is on and I pull the dipstick out it has a really strong suction. I’ll keep an eye out now that you’ve mentioned it. But an O-ring wouldn’t be a bad idea or some thread teflon tape.

@JNXT_Railroad Год назад

This is a well-built, nice looking piece of uselessness. What exactly is the need for this? If you are maintaining your car correctly with all your emissions systems in operating condition and changing your oil at required intervals, all you are doing is adding additional plumbing that isn't necessary. What does the thing really do? The car accessory industry never fails to amaze me.

@LoveWhatYouDrive Год назад

Thanks for stopping by. I guess we will see you in a few months if it’s really useless or if there’s any good out of it the industry is amazing, we can spend weeks and days, putting on knickknacks that we might never use.

@JNXT_Railroad Год назад

@@LoveWhatYouDrive I'll make an analogy with something that is actually functional but also a waste. K&N air filters. For practically any driver, there is zero benefit. They may have superior filtration (debatable) but also come with the need to service them by cleaning and re-oiling. This carries the risk of improper/ineffective cleaning, plus over-oiling the filter media, which puts your MAF sensor at risk. And all for many more dollars and zero improvement in "seat of the pants" performance. People may think it's better, you get a decal to stick on your window.....I hope you see my point - added expense for zero benefit plus additional risk for your car's intake system.

@Kay-dx8vm Год назад

You don't know what it's for but commenting as if you do. That's not how we learn new things bro

@LoveWhatYouDrive Год назад

✌🏼

@chanoleyva8584 Год назад

@@JNXT_Railroadno k and filters work great, never had an issues in multiple vehicles motorcycles in the dust and always never seen any get past the filter