CBR500R Aftermarket Brake & Clutch Lever Install | Puig 3.0 

Good tutorial accept you want to put grease on the slide pin only and locktite on the threads only. grease on the threads can cause the nut to come loose over time and loosing your brake lever while riding is SUPER dangerous.

For those of you who can't figure out why your clutch lever even at the most furthest out ( not the extension bar part of the lever mind you..I'm talking if you have big hands and want it out by default as far away from you as possible...THAT adjustment) setting is still loose versus it supposed to be autopressed against the rolling little wheel of the mounting adapter................. .... Check that black foam part that had the lever in it. chances are..there is a tiny spring around center ways of it. PUIG in their infinity stupidity didn't include ACTUAL instructions nor any pictures relevant of a parts to show you how to install this properly. You have to put the spring in between the "ledge" of the mounting adapter where it makes contact with the clutch lever. There is an indention in the clutch lever as well as a small intention inside that " ledge". It's a bitch to get it in there without falling it while mating the clutch lever and mounting adapter together with the inside brass colored /looking inside cylinder. 2019 cb500x here and I think it's the same one as the cbr500r and cb500f, but could be wrong. Bought my kit from Motorsport.com mount = manufacturer part 6115N clutch lever for black with green selector and green extender = 24VNV Ensure you click at the bottom part of the page that says " Fitment" it will be a drop down link deal and then search for your bike's model. Cheers

Thanks for the video Andrew! I have the exact same bike and today Ive got new Puig levers. Looking sick!

Used your video to fit puig levers on my ‘07 fireblade (sc57). Not exactly the same as the one in the video (mine doesn’t have a clutch cable) but it was a great help, so thanks mate 🤟🏻

Sick video bro

You blowing up 👍👍👍👍👍

And you're doing it on my bike. Hell yes

Just installed 3.0 on cb650r, not happy with them at all. I cant seem to find a propper fit for my hands on them.

Hi I'm a new cbr 500r owner. What is the function of these over the original. Thanks

Dry lube or graphite for the clutch cable

So for the brake lever, there is no cable or anything to add to it?

Good video mate, thx

yoooo we got the same bike brother❤️🖤

not sure you want to grease the thread, but i'm no mechanic either

Does the bike have to be completely upright to do these replacements or can it be on the kickstand?

Hey there, do you need the Puig brake lever mount and clutch lever mount for this?

Yo boss do you remember if these were the standard or shorty levers? Also are they foldable or the regular ones?

Are they fit on R6?

no before & after images :(

Why was there no cable at the break side?

I am a new future biker. Is puig a good brand? I dont want to use cheap made in china levers. I want levers that are made for my bike by a good brand.

Just went on that easy huh,,, ok

Poo-Ig (like iggy pop) Puig

On Top of screw you shouldn't putted a grease. Hehehe better use only a little drop of screw glue on top ;))) renember that dude ;)) peace!