CENTRAL HEATING SYSTEM FLUSH with ADEY MAGNACLEANSE UNIT & BALANCING TO GET ALL RADIATORS WORKING UK 

I can relate to your plumbing channel more than all the rest out there, enjoy the content keep it up bro 👊🏻

Another great job as always 👊

Good for people to see what we actually do, another great vid 👍

Love it. Those magnacleans are great 👍🏼

Lovely job done...very satisfying I always give the option to replace the pump too leaving the old one as a backup....at an extra cost naturally 😉

I have a magnacleanse , and a powerflush machine think am going to get a thorough flush as if the water pressure is good reversing the flow quickly will cause alot of turbulence and hopefully give me good results. We will see. I got my self the Adey ProCheck so i can test the water quality at the end, I find the customers like the report. Nice job 👌 keep the videos coming really enjoy them appreciate the effort it take to film and edit these.

I find it's a good ldea to explain to the clients the long time saving of the clean ie heat exchanger blockages, jamming rad valves, also I find using the new magnaclean as a dosing pot works better for me, great videos by the way keep up the good work

New subscriber. Great video that Ive been looking for.

Fantastic job. 😊👍

Top result👍

There is something strangely satisfying seeing the sludge on the magnets after a job well done.

I'm doing one of these tomorrow and this vid will make it easier. A friend lent me the kit.

Its surprising how much stuff they collect ... that reminds me have to Check mine 👍👍👍

Sweet cleanse 👍

Out in the country mate?! .. oil fired wuzzi. Good vid again I bet the customer is happy

Good old UK. Some irresponsible dog owners dog going mental on the background. Great vid been thinking about getting a magnacleanse

Well done Mark, a brilliant insight and demonstration on how the magnaclean and system flush work. I’m sure the customer was very pleased after seeing the results of the debris on the magnets. It must also be satisfying for you when you achieve results like that. Another brilliant job and thank you for sharing. Have you used the locktite thread seal yet in place of the PTFE tape? If so what did you think. Have a good week, take care, regards , Chris.

I remember cleaning a filter one time and it was that thick with it that I had to really pull on it to get it out. No wonder the boiler was kettleing.

once the inhibitor is in does that also breakdown what magnetic is left in the system or carry it too the magnaclean as I've just flushed the old radiators out the old school way with hose on each end as they were two big for me too lift the smaller ones i removed also agitated them the rest i replaced, i put mc1 in but the full bottle on a 10 rad system as i wanted more then too less

Cracking job Mark 👍 you should have gone to A&E with that wound - but you patched it up Rambo style 😁 Have a good week mate

Excellent pal, I generally wrap a dish cloth around the rad agitator. It prevents chipping the radiator paint. The rad hammer's also great for shifting magnatite from P2P's at when you need to get the hot water up and running. Again wrap the rad hammer with a dish cloth. 2 x Adey MC3 are equivalent to a bottle of MC5. Don't get flustered by the trolls. They always seem to know how to do things better 😜, great tutorial pal 👍

What would it cost roughly to flush and balance a four bed with thirteen radiators off a worcs Bosch combi?

Clean as a whistle to be fair!!!

what do you do to keep pump running when boiler has got to temperature and system won't circulate. is there a way of just keeping pump running

What do you use for shaking radiators on the end of the drill??

Another good job well done mate. Not sure if you do this when connecting the pushfit connectors for the magnacleanse, but I always leave the twin black collar with the red lock on to make it easier to remove the pushfit connectors. Just a tip if you didn't already.👍🏾

Brilliant video mate. We're would you fit the permanent magnetic on the return or the outlet. Ps I'm still learning lol

Great job as always. Just out of interest, when would you power flush a system rather than magna cleanse? How do you decide which is best? Many thanks.

Just bought one of these systems for my own use - it’s connected and running now with strong system cleaner added which I’ll leave running for a month, cleaning magnets regularly. I’ll then drain down and refill with Inhibiter. Amazing what came out after even 1 hour! A few of my returns are blocked - do you think it clears blockages?

Hi Mark, great video ... quick question, where did you get the mat with your branded logo made?

Hey Mark, hope your Xmas was relaxing..... just a quick question regarding this job... Did you shut down and flush 1 rad at a time or did you just flush through the whole system??

Another cracking video mate! I'd really appreciate it if you could tell us mere mortals how you went about flushing the system afterwards with a vented system please? 😬 I'm guessing pressure from feed tank alone probably not enough? Thanks mate

Did you un-bung the FnE tank before you started the magnacleanse? Or you left it like that?

What would it cost roughly to flush and balance a four bed with thirteen radiators off a worcs Bosch combi? 10:37

What made you choose the are rather than the kamco

how much this can cost a customer in Decmber 2023 about in North East? Thanks

theres a 100 more of them somewhere :L made me laugh more than it should of haha

Would this work on a solid fuel system i wonder 🤔

Did you convert to sealed when doing the flush or leave it open vent

This is not a criticism of power flushing. I'm guessing that CH system has 100+ litres of water in it and 10+ big radiators. That is a tiny tiny amount of sludge really on the magnets. Pretty much nothing at all. Power flushing used to be a gravy train for a certain organisation - they insisted upon it. It was relatively easy to do and they charged an absolute fortune. I refused to have it done until I had a new boiler at which point it was essential for the guarantee. You will always get sludge - steel radiators and copper pipes and water = a chemical reaction. Mr Adey was my plumber before he became famous btw.

Im thinking about getting one of these. Quick question tho geez can it only be installed onto an existing magna cleaner or have they made it universal

"there's 100 more of them somewhere" haha

Mc3? Shouldn’t it be Mc5 as it’s a rapid flush ?

Can I ask mate how much you would roughly charge for a system clean like this. Think I need to add one to the tool list.

What is the minimum time for a manga flush to do a good job

Great down to earth video. Worcester bosch filters, any good or is there better?did you find the other 100 dog's 😂

Hiya mate, great video. How much did you quote for this? Cheers

Go to 15.25, looks like there is already a filter on the system? Think it's a spirotech

How much does it cost for a full system flush through?

When I cut myself use PTFE around your finger then tape over it, saves the stickiness and is blood tight😉😂

100 more 😂

Not that much muck caught on them the magnet you put on pipework would of caught all that.

it wasn't that much

👍🤓👍