Changing All 3 Engine Mounts On a 2012-2018 Ford Focus Is Easier Than You Think - DETAILED DIY 

Only a little bit. You don’t have to necessarily jack the engine wayyy up far enough to stress the other mounts out. You’re just merely supporting it.

Have been busy, but will be getting them up soon. Will be circling back to this.

​@araparts Any update on torque needed, was hoping to do this repair myself in the next few days.

59 ft lbs on the bolts to the engine, 35 ft lbs on the frame bolts

ENGINE MOUNT- 2 lower bolts 59 ftlb 2 closest to engine (upper) 66 ftlb Trans Mount 4 outer bolts 59 ftlb Main center bolt 109 ft lb Lower Torque Mount All Bracket bolts (4) 59 ft lbs Main bolt Thru mount 92 ft lbs

@ZeljkoCrni I put all the specs for the 3 mounts there.

Transmission mount was fine.