Cheap Brushless Motor/ESC Combo 

To make the motor and esc work you need to keep holding the trigger on full power or full reverse for a few seconds and then let go of it it should then make different beeping noise. For me the motors and escs have worked really well :)

Yes my wife loves it we love going out and playing with RC's thanks for the content keep up the good work love the channel

Those motors are great. I’ve fried 3 of those esc’s and will never buy another one.

I just got one, it is a beast! Blows the tires off.

Mine came with a different program card and I crashed my rc in a ditch full of water last year and still working 👍🏻

Wish I'd seen your video before buying. I now subscribe to your channel. Funny thing, my motor came with red, yellow, black leads and the esc came with blue, orange, yellow leads. Mine did nothing as well. The motor and esc heated up though. I smell ozone. This was an Amazon purchase.....and return. Thanks for the video!

I have the blue 120a gool rc esc and it's definitely not waterproof . I hit a big puddle with my sc10 and literally had fire 🔥 another thing to watch out for is make sure it say programmable in the description of the ad or you won't be able to program it. Other than that my sc10 rips with a 3100kv brushless motor. I was getting some serious air with it at the skate park yesterday. You must have a defective one . Did you turn the transmitter on first?

My Futaba TBLE-02S did the same. Rapid beeping and the steering servo worked but no throttle. Tried everything to reset/program the ESC (and those come with instructions). It wasn't throttle end points or trim settings. It was a bad Rx/binding issue. The rapid beeping usually indicates the ESC isn't getting a signal. I put in a new Rx and it worked perfectly. Mine was a Tactic Rx. Perhaps try swapping out the Rx or rebinding to see if that works.

I am definitely Lucky enough to have a Wife that will join me in driving around. I am going to build a Midnight Pumpkin totally Ampro engineered out for her this October. I ran into the same issue with another Goolrc set and it had issues because of the set points on the transmitter. Even at zero it wasn’t happy so I unplugged it from channel 2 and plugged into channel 1 and ram throttle from steering for a moment then switched it back to channel 2 and it miraculously was fixed I am not sure why.. Sorry for the long message lol.

Are you using LiPo , they are all set for LiPo , also may need calibration , if servo works and flashing red calibration is required ..have few of the same setups and work amazing ..it's more water resistant

Well I already made the mistake buying this combo. Mine was goolrc branded and the box was also branded. Ran it with my Traxxas Bandit this morning and quite frankly I'm putting the stock motor back in. Because I don't have a gps but my vision is pretty good and it looked and felt slower than the stock setup. It's even slow on 3s. I'm just going to wait a while and get the vxl upgrade, I'm not looking to go Mach 12 so that will be just fine. Great commentary and content definitely subscribing ✊🏾. Oh and if your wife knows any women in the Northeast United States that are into r/c vehicle's please point them in my direction lol

Great video bro, sucks about the esc don't worry it's just the trim setting and as for the program card look up shaluoman program card or young rc program card. I legit use these in my crawlers and they work great

I had that combo in my bandit did some bashing at our local skate park let me clue you the bandit ran like a chicken with its head cut off lol 👊🏁

My guess would be that you received a cosmetic qc failure, which was either purchased by a third party or just sold unbranded by goolrc. Since it didn't pass, it doesn't get their name on it. I think that's the most likely reason because both products were blemished but functional. If you're not big on appearances it's actually a great way to cut costs on builds/spares

I just had the same problem. Doesn't work with my little sons car, but did work once I tried my Transmitter and Receiver and worked within my bigger sons car. Solution: The Transmitter throttle from my little sons RTR wasn't centered and that caused the problem! As it has no display for the calibration I haven't been aware that the throttle wasn't on 0

You have to set the throttle trim and will make a different beeping sound and then stop beeping. And then should work .Hpoe this helps.

Mine did the same thing. I swapped the two outer wires on the motor and it fixed it. Same motor and esc too

I have two 60 amp Gool esc that are junk just like yours. I have tried everything I know to make them work on a brushed Traxxas 2wd Slash. Disappointed is an understatement and to top it off GoolRC will not respond to technical support emails either.

That's a BL3660 which is a 550 motor with a 5mm shaft. The BL3650 is a 540 motor with a 3,17mm shaft. Also, that's not a GoolRC motor but maybe made by same maker.

Always check if it's faster in reverse if you're not getting the power you want @ full throttle forward see what full throttle reverse is. I still have not figured out how to change motor rotation. I'm stumped too.

Try switching the throttle servo to a different channel.. I have a goolrc combo just like that..

did you calibrate. most of the no name brand escs need the program card that is just the LED dots, you know the one. also was your radio ch2 dead center? sometimes if you move it a little off center one way or another it may auto calibrate. i prefer either the blue Hobbystar stuff from RCjuice or red RocketRC stuff from Supass. I have had zero issues over the years with those two brands. My RocketRC 160amp 6s esc blows my Hobbywing quickrun 150amp out the door. i tried both in the same Vendetta with the same purple turnigy XK 6s motor and gearing and the RocketRC is the winner at 1/3 to 1/2 the price!

We go on hikes together. She hikes and I hike to crawling or driving spots. That's how we do it!!!

It's definitely a step up from the silver Mabuchi stock 540 motor and esc.

I’ve had this happen. I mucked around with the throttle neutral on the transmitter, and it stopped.

U running a Lipo pack ? If not it sounds like its in the wrong mode on the esc....i dont run brushless but it sounds like it...it could be a dud esc....reach out to to their customer service if not return it....:)

I got that kit under the name Surpass Hobby, and got a racerstar programing card and it is working fantastic, you may have just got a bad motor

I tossed one of these in a Rustler. It acts like it has a power band though. It's really strange. Half throttle it cruises around just find but anything beyond that is like a two stroke hitting power band and it just wants to wheelie uncontrollably. power is just not linear.

Okay so I bought two put one in the wife's car just like you... no problems what so ever... runs great!! it's fast and quick but on the other hand put one in mine and I'm getting the fast beeping now but worked great at first.. seems like mine works, don't works works, don't works.... Also bought a silver programming card which doesn't work..

I wish my Wife was into RC's but she just likes going to the spa and traveling. So far my GoolRC setup has been doing fine in my 12th scale buggy. They are super cheap and probably not really tested at the factory so maybe some of the ESC's are faulty. Just a guess on my part.

Be excellent to each other!

I heard the same thing. “Oh! There great try one for only $40 bucks bla bla”, others are paying the price. Think I buy something else more reputable. 🇨🇱👍

My daughter is the one who rc's with me. Her favorite car is Tamiya Wild Willy and her Sendero crawler. Bad reciever, Anyways! hopefully you get the esc to work. Let us know

Mine doesn't go but she supports my hobby and tells me to get out and go rc'ing with my buddies more than I do

I've always found eBay to be a bit of a lottery when ordering RC parts

The boomerang. I had one as a kid

Hi i have a problem, I bought a lil brushless combo online and it was dirt cheap. It looked very good so i gave it a try and the top speed is very good but when i wanna get of the line i give full throttle and the motor makes sounds for 1-3 seconds and then drives normally as nothing happens. But always when i wanna start to drive or wanna go uphill at low speeds, it makes this. Has anyone a fix for that?

Are you Using a Lipo battery?. If not that may be a"low votage" alarm. Oh! So my girl friend said she would not make me learn Bridge if I don't make her drive one of my cars.

I ran mine through water, that is why I am now watching videos of cheap motor/esc combo to find a better replacement.

that esc has its own program card

Will this fit in something like a Axial scx10 transmission

You might want to try and set throttle end points. I bought a set for $25 bucks that was the same thing and after I did that it was okay

I have the same thing. Not Ramses Gool RC, It did not beep but rather did nothing l. Fan came on, but I can’t accelerate or turn… It’s a bad ESC out of the Factory

Adjust throttle trim to stop beeping

should have switched the motor wires around...

No just turn all your transmitter this means your throttle or reverse is not set to 0 mess with your transmitter settings it will work lol

So lucky r u.... I guess I'm lucky also, my girlfriend tolerates and supports us kids. ... she is the Secretary/Treasurer of our local club and does a lot for us kids to he able to race... but she doesn't drive RCs at all... would be cool to enjoy together, even just casual driving around the park or street...or...

I wrench while she cooks we call it a fair trade

I won't tell the wife u got the cheao ebay stuff 😆

I wish we could get my wife to get involved with us. Maybe then she’d understand why Grayson and I love it so much

Turn the throttle trim down mine did the same. The throttle trim on ur remote is too high

I got one sent to me with two of the wire not attached they were held on by shrink tube lol

That sucks brotha, have you tried hitting it with a hammer lol!!! unfortunately in this hobby, if you buy cheap junk you get cheap junk! i've "learned" this lesson the hard way a few times.

I have the rustler 2wd and I have no clue on how to mount the esc

Dude you need to send your ended points.

Throttle trim.

Low Voltage not low votage oops!

if id could afford another one lol we share mines well ours smh i bet shell have more fun if she had her own rc and no new bright shit like i tried lol

you need an amazon program card

Adjust throttle trime

Oh I know that problem your controller trim is Different it’s hard to explain I’ll make a RU-vid video where you can only see it through a link and i’ll put it in the comments of this comment that’s the only way I can send a RU-vid link

Reverse your two outside motor wires

My wife sead that my toys cost to much lol

Esc is garbage . Love that motor

I don't care if it's rated for 3s. Don't.

They are trash. I just wasted 150 on one of these