Cheapest Most Powerful Chainsaw Ever Made 

When is he gonna understand, that he is ruining the clutch by reving it, while brake is on

One day you get to meet taras at his home for whatever reason you look in the backyard and it’s just 1000s acres cleared to stump

How to blow up clutch tutorial!

Always leave the chain a little bit loose. If you tighten it up on maximum your chainsaw will struggle more to spin the chain.

After cranking, disengage the safety rail, hold the bar over your desired cut, and rev the engine to oil the chain. You will see it make a line of oil on the piece to be cut.

Now buy a mill attachment and make lumber.

Where do you List your yard sales for all the lesser Junk you buy?

After 3 tanks of gas you can get it tuned, that's when the break in is done and it'll run even stronger.

I believe you have to disengage the brake when starting.

*Pull the muffler and mod it. Re-install the modded muffler and tune the fuel mixture to match the increased airflow, then you'll really see how much power that saw really has. You'll be surprised at how restricted those mufflers are from factory.*

Lets see how long it lasts compared to a Stihl or a Husky.

That is a BEAST of a chainsaw !!!!!!!!!!!!!!!!!!

Would be excelent if someone could either teach this guy how to run that saw or take it from him. That bog in the cut and then trying to run it WOT with the chain brake on makes me want to do violence lol...when he blows it up send it to me, ill appreciate it

With a bar that long, it's nice to have a jig to hold the far end off the bar, while you put the chain on... Or someone else to help you? That's usually a luxury!

He came in to my work the other day he is literally 7foot basically 😂

Love your videos Tarus. Keep them coming

With a smaller bar it would probably be a lot better

The chain isn't supposed to be that tight

Dude... That chain was waaayyyy to tight!

Thank you for the vids I’ve watched you for years !!

Saw will probably start running better after a bit of cutting.

Can you do a video one day of your Chainsaw and Knife 🔪 Collection I’m pretty sure that would be impressive collection 🤙

Nice and sharp thanks for sharing.

WOW!!! IMPRESSIVE!!! I WANT ONE!!!

you have that chain way too tight

Taras. Please get better safety equipment. You need it.

Off to eBay again lol and then to buy that $29k property of trees in WA that I put off thinking I'd need to spend an extra $15K to hire someone.

And he did it once again... Why are you revving engine with brake engaged? You totally destroyed clutch in few seconds ant that's the reason why is it getting stuck while you cut that log.

Keep up the awesome videos 😊

This is a really hard wood too man.

Awesome saw! I would definitely recommend you wear chainsaw chaps!

how many saws do you have?

You need to get that saws engine ported and polished.That would make things interesting.

Wonder if it available here in Canada. A 365 husky runs about $700 here.

Thanks for the sweet chainsaw music man.

Merry Christmas Taras to you, your family and the dogs. Looks like you got a new toy. 🎅🎄❤

I might buy me one looks like a great chainsaw

04:55 who else remembered gta vice city?

You can tell he’s excited

Merry Christmas tarus hope you and you wife and kid is doing well

Beautiful machine.

what were you using that log for?

Well it has 120cc two stroke engine thats bigger than two scooter engines combined

something that large and heavy is kinda cumbersome for firewood i would imagine. gonna do some milling?

Did you oil the chain? Lol you gotta have chain spinning before you touch the log too 😂

The new Top secret version of Blue (beast) STIHL 😎🤫😂😂

Yep , a stihl ms880 will cost you about two grand now . Those chinese knock offs work pretty well for what I've heard That looked like maple too , tough wood to cut . Oh yah , the stihl is without the bar and chain . A 42"bar AIN'T cheap either .

I'd like to know the brand and model please..?

Wait till you put an unlimited coil on it and modify the muffler. It can really pull some chain

Nice chainsaw!

I'd love to have one.

Cảm ơn bạn đã chia sẻ video rất hay 👍

Oh my God he is destroying that clutch

The handles snap and get your hand close to the chain.

Nice work brother ❤️🇵🇭 👍👍

Get to the chopper 😂

My 455 Husqvarna has more power than your saw, I run 28 inch bar

You have to break the saw in easy on the first half tank to full tank. You will get longer life. You should always tune it as they are set for China's altitude.

Recently had a saw blade almost Cut my thumb and hand in half be careful pls guys

This saw would cut so much better with a better chain

How much is this in Philippines?

Dang

How much is the price sir

Piły nie odpala się na hamulcu i później jej nie gazuje bo sprzęgło chuj strzeli widać że słabe obycie ma z takim sprzętem

I use only blue max 99 bucks for a 20" 55cc cuts for years has a pro chain

I have used a sthil 170 that cuts as fast or faster

Maybe because the clutch is still engaged

Good video

finally a break from the precious metals.

Neat $1400 is cheap. Wow

Chainsaw???

Taras ….. I like to chap ( chop ) wood too !

Nice vid

Wow

Also leave the brake off when you start it

That’s very good cutting video! Do you have interest in promoting Farmertec products by shooting videos on social media?

If it was a 36 Long shaft it would work better than that 48

I watched till 6:37 you scare me with that saw lol

You need some Buckin’ Billy Ray Smith in your life

And why you keep getting on the ground?! You've got a big saw with long bar... It's easier to stand up and buck!

this saw struggles to cut soft wood even a 55cc saw would be better haha

Mesin senso yang sangat menarik 👍👍 bagus bos 👍👍

Just a wild guy doing something....We do ha rules at chainsaw community

BOOM

Чтобы ПРАВИЛЬНО выставить натяжение цепи, надо конец шины поставить на пенёк, полено - не важно, главное опереть и взять пилу за заднюю ручку, тогда шина станет в крайнее положение, упрётся в болты, которыми зажимается. Либо приподнять конец шины рукой, что при такой длине сложновато. И тогда натягивать цепь, зажимать шину. С короткими шинами разница ощутима, а с длинными тем более. И, если зажать шину просто, когда пилишь, она всё равно приподнимется и упрётся в крайнее положение, цепь провиснет.

Nowdays, youtubers think they know everything

Can you do more mre videos plsss🙏🙏🙏

Port that saw..

Hint: The saw is fine.

Only he says Bruh but anyway I love your videos and I have been here since the beginning

$720? Are you nuts

you made the chain to tight, loose-it a litle bit

the Texas chainsaw massacre be like

That chain is way to tight

👍🏾

Chain is a little tight

And clutch smoked

Te hozzánemértő ohh teeeeee.

MERRY CHRISTMAS SENT CARD....................................

Wooooooo‼️✅👀💭👍🏻