Checking Out The AtomStack B3 Enclosure - On Board Camera, LED Lights & Fume Extraction

Подписаться 62 тыс.

Просмотров 1,6 тыс.

50% 1

Checking Out The AtomStack B3 Enclosure - On Board Camera, LED Lights & Fume Extraction.
In this video I will show you how to fully assemble this enclosure on Atomstack A24 Pro frame. I will take through the process of setting up the camera and I will do some tests on the way.
This enclosure is compatible with Atomstack X12/ 24 PRO/A6/ A12/ A24 PRO
Shopping:
UK
AtomStack B3 Enclosure - shrsl.com/4eysq
AtomStack A24 Pro - shrsl.com/4bfxj
AtomStack F60 Air Assist - shrsl.com/4bfxm
USA
AtomStack B3 Enclosure - shrsl.com/4eysq
AtomStack A24 Pro - shrsl.com/4bfxp
AtomStack F60 Air Assist- shrsl.com/4bfxr
Disclaimer*
This video is sponsored by Atomstack, the enclosure has been provided to me free of charge. However I was not asked to say anything nice about the product and thoughts presented here on this product are my own.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
Shop on Banggood - www.banggood.c...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #atomstack #B3enclosure
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Хобби

Опубликовано:

15 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@MCsCreations 6 месяцев назад

Fantastic review, Tomasz! 😃 Those enclosures are great! They help your eyes and lungs! Anyway, stay safe there with your family! 🖖😊

@CasualDIY 6 месяцев назад

Exactly and this one seems to be loaded with cool features

@almagill 6 месяцев назад

Another cracking review Tomas!

@CasualDIY 6 месяцев назад

Glad you enjoyed it

@stephensenior3589 6 месяцев назад

Out of all the lasers you have shown us This 1 with the enclosure will be best for the type of work I'll be doing thanks for showing this Tomaz 🤠

@CasualDIY 6 месяцев назад

And I think this is a great choice. I absolutely love this enclosure.

@johnpenman1548 6 месяцев назад

Hi Tomasz, A great review, and I am edging closer to having one but first I must build a fixed workbench at the back of my small workshop to accomodate the laser!

@CasualDIY 6 месяцев назад

Well I'm planning to make a full unit to accommodate my xTool and possibly one more 🤔

@dougdavidson175 6 месяцев назад

Nice review and kit. Still not on my radar as a purchase but I do hope you get lots of use from it. Take care & stay safe.

@CasualDIY 6 месяцев назад

Very nice kit indeed 👍

@wrightiow 7 дней назад

Excellent video, I have just fitted this enclosure and could not work out camera settings but you have helped buy confirming it’s a fisheye lens. When you celebrated the camera your numbering was upside down is that a setting I need to enable?

@CasualDIY 7 дней назад

No special setting, just went with the prompts.

@NathanTalbertWoodworking 6 месяцев назад

I wish this had been available when I set up my laser. the cheap (not cost wise) one that I picked up broke the second I set something on top of it. now its held together with the handymans secret weapon. I'm guessing you don't really smell anything underneath the edges while its running if it kept the entire thing that clear of smoke and smell when you opened it up afterward.

@CasualDIY 6 месяцев назад

No you don't smell anything as it operates. Just keep it closed about 10 seconds after the job is finished. When you open it you will be able to smell it slightly as the residue builds up on the walls of the enclosure. Bit overall it's not bad at all.

@ThereIsProbablyNoGod Месяц назад

Great review. I am considering buying the A24pro with the enclosure. I have a question regarding the camera. Is there a way to connect the camera over Wifi or just via USB? I gues the enclosed camera is usb only, but is there any useful Wifi camera that could be used? I plan to operate the A24 in a workspace where I do not have a computer nearby. As far as I found out so far, it is possible to operate the Laser via Wifi (I hope that's true) but would be great to have the same for the camera.

@CasualDIY Месяц назад

@@ThereIsProbablyNoGod its USB only unfortunately

@ThereIsProbablyNoGod Месяц назад

@@CasualDIY Thank you for the quick answer.

@trevorwhite9138 6 месяцев назад

Can it cut 3mm ABS? Thinking about cutting holes in enclosures.

@CasualDIY 6 месяцев назад

Abs will tend to melt and release some harmful fumes. Don't recommend it

@trevorwhite9138 6 месяцев назад

I have read some say it melts others say it’s fine. Was thinking the enclosure and exhaust takes care of the fumes?

@CasualDIY 6 месяцев назад

@@trevorwhite9138 it does you will be polutting someone outside 😅

@trevorwhite9138 6 месяцев назад

@@CasualDIY yeah I suppose a Heppa? Filter would be required. I haven’t found much about these diode lasers and abs. Maybe it’s the fumes that puts everyone off. I have 500 enclosure lids to cut and currently do on a cnc but laser would be faster I thinm

@CasualDIY 6 месяцев назад

@@trevorwhite9138 Don't have too much experience with that. Not sure if a CO2 would be better for this. You need to get more research done on this topic.

@adlapl 27 дней назад

I have this laser and it is great for what laser does :) and speed. But! You have not mentioned that cover is really heavy. That is why I installed front plate permanently. Then I have cover only from top - it is one plate only. It is very easy to open and it is light. Of course you do not have then, this "alarm" on open. Who cares. Also power supply to fan should have an individual switch. I will do this mod myself. Instead, you are provided with Y splitter 24V cable, with one switch for both! i.e. laser and a fan. It is noisy on starting up. I think in your movie - after connecting a laser to power you just disconnected mentioned Y cable from the fan to have no noise in a background. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-heoe_Rd6gms.html Finally you cannot print via WiFi from PC, only from mobile. Review should be balanced in pros and cons, not to be a "promo".

@CasualDIY 27 дней назад

I didn't mention its heavy as I don't find it heavy. I think that's something will find out personally. Not sure if I understood you well, but instead of having a full enclosure you now have just front top and back? With the power to the fan that is correct I just pull the connection out, would be better with some sort of a switch. I guess they done that as its easy to forget to turn the fan on. I've done that multiple times with other machines. And this video is not a review, its an overview- basic information on the product.