Тёмный

Chevrolet Malibu: Brakes & A Front Wheel Bearing 

South Main Auto LLC
Подписаться 908 тыс.
Просмотров 141 тыс.
50% 1

In this video we have a look at a ladies 2012 Chevrolet Malibu who came in with a customer complaint of a grinding noise in the brakes. A short test drive an a quick inspection did show it needed some work. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Опубликовано:

 

8 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1 тыс.   
@SouthMainAuto
@SouthMainAuto 3 года назад
Tools Used In This Video: -Astro Pneumatic Tool 219 ONYX 3pc Die Grinder Kit w/ 90° Die Grinder, Die Grinder & 8pc Double Cut Carbide Rotary Burr Set: amzn.to/2RLAdk0 -3M CX-DR Brake Hub Cleaning Disc Holder 07545: amzn.to/3pOgUU0 -DocaDisc 30PC - 2 inch Roloc Sanding Disc Mixed Pack : amzn.to/3vd2AoR -Disc Brake Piston Caliper Compressor Rewind Tool Set: amzn.to/3vhTLdA -10-Piece 3/8" Drive Nano Impact Torx Bit Sockets: amzn.to/2SmAL0g
@mikemaccracken3112
@mikemaccracken3112 3 года назад
I’m just here for the rambling of Eric O😂
@KingRatt
@KingRatt 3 года назад
What was going on outside? Loose exhaust?
@TenmaFN
@TenmaFN 3 года назад
Only way to fix entitled people who do that very thing.. is to call them out... embarassment is a good way to modify entitled attitude.
@tracydiller9378
@tracydiller9378 3 года назад
@@TenmaFN Could not AGREE MORE!!!
@1202Sid
@1202Sid 3 года назад
Hi Eric, I'm also in the rust belt but up north. Caliper bracket are a big problem seizing the pads up and I wondered what was your thought on using a cold galvanizing compound behind the clips ?
@ericvardin5304
@ericvardin5304 3 года назад
There is a near-zero percent chance that most shops clean up the hubs and sand blast the caliper brackets - massive respect for your attention to detail!
@DeweyCheatumNHoweLLC
@DeweyCheatumNHoweLLC 3 года назад
Yes, I worked with a few like that I'd end up with the comeback
@rustynail9793
@rustynail9793 3 года назад
Eric doesn't want a return. Other shops will make up a new thing to repair. Oh that's just your muffler bearings squeezing. I wouldn't drive it if I was you. That would be dangerous that's another 500 dollar repair
@300DBenz
@300DBenz 3 года назад
I wish I had a sandblaster to clean caliper brackets, it would be a lot quicker than the hand file I have to use .
@gary00832
@gary00832 3 года назад
All in part of making your job easier even at the cost of a little more work!!!
@JosephArata
@JosephArata 3 года назад
I end up having to use rotary wire wheelss and cup brushes to get some of the light truck/work van/RV brakes done so that I could install the new shims and pads. Unfortunately, we don't have a blast cabinet in the truck/heavy equipment shop I work at.
@orionwarren4244
@orionwarren4244 3 года назад
"People piss me off...one day I'm gonna go crazy" I'm right there with ya, Eric!!
@SouthMainAuto
@SouthMainAuto 3 года назад
It's comin man I'm telling ya
@stevericketts810
@stevericketts810 3 года назад
🙋‍♂️
@joecool509
@joecool509 3 года назад
We have reached a whole new level of narcissism
@llloyd4
@llloyd4 3 года назад
Yeah, I feel ya Eric. As a cashier I am frequently peeved by the self entitled Karens out there.
@1337penguinman
@1337penguinman 3 года назад
There's a reason I don't work frontend anymore.
@johntuttle5396
@johntuttle5396 3 года назад
Someday, when NAPA does become a sponsor, Eric will proudly announce, "This episode is brought to you by Napper, yes, Napper , a sponsor!" Medical authorities will then be baffled by the sudden huge increase in the number of of seizures, heart palpitations and fainting spells experienced by professional and shade tree mechanics across the country!
@danr1920
@danr1920 3 года назад
He gives them enough free plugs now, why would they waste their money to sponsor him?!
@kenny7220
@kenny7220 3 года назад
@@danr1920 They wouldn't. They're cheap. Which is why most shops use them over other parts stores. That and better kickbacks for high volume ordering. They've got fairly decent parts for the price though.
@williamgagnonroadboxservice
@williamgagnonroadboxservice 3 года назад
No he won’t He will never be a NAPA sponsor.. Too many limitations
@MrWolfSnack
@MrWolfSnack 3 года назад
The irony is his shop is franchised by NAPA but they still won't sponsor him.
@kenny7220
@kenny7220 3 года назад
@@MrWolfSnack Mr Tire is franchised/owned by AutoZone as a parent company. They're not sponsored either. What's your point? Most shops order parts agnostically. Whatever store gives them better service for what they need gets the business. At the end of the day, he supports Napa because they help him get the jobs done. I work for a competitor of them, and if it wasn't for some people getting me insane deals on parts, I'd go to napper myself
@joelevi1561
@joelevi1561 3 года назад
Unfortunately my urologist uses the same vice grip technique. It's tough getting older
@Eastahtata
@Eastahtata 3 года назад
I laughed then realized you’re probably not joking
@glenjones6980
@glenjones6980 3 года назад
Wait until you reach the age when they lose interest at the front and head out back. I've forgotten what my doctor looks like nowadays but I can recognise his breathing behind me :)
@howzit9397
@howzit9397 3 года назад
At least your urologist uses a vise grip! When he start to use plastic tie straps I suggest yo change doctors hahahaha
@geyser3445
@geyser3445 3 года назад
I doubt there are many other repair shops that take as much care as you do.
@theapprentice1404
@theapprentice1404 3 года назад
There is one in Ontario Canada called Ken's auto and fastlube I'm the lead tech there and we live by Eric o and his work ethics I've learned alot my self from his videos
@joecool509
@joecool509 3 года назад
True story
@christopherenger1602
@christopherenger1602 3 года назад
My boss wants brakes done in 20 mins...
@geyser3445
@geyser3445 3 года назад
.....whether they work or not?@@christopherenger1602
@kellyhay79
@kellyhay79 3 года назад
💯% agreed
@nopenottalib4366
@nopenottalib4366 3 года назад
You're never too old to play Minecraft. My kids got me into it many years ago when they were still in elementary school. They're both grown up and moved out now - but we STILL play Minecraft together from time to time.
@edwardmyers1746
@edwardmyers1746 3 года назад
Finally, this can cure my lack luster RU-vid recommendations 😆
@joshuarobinson2990
@joshuarobinson2990 3 года назад
mine were just as bad as well
@sandybarnes887
@sandybarnes887 3 года назад
Dont forget Ivan at PHAD. 😃
@AntonioClaudioMichael
@AntonioClaudioMichael 3 года назад
Lol 😆
@GlycerinZ
@GlycerinZ 3 года назад
I recently got into Vice Grip Garage.. quality stuff
@AntonioClaudioMichael
@AntonioClaudioMichael 3 года назад
@@GlycerinZ Derek has a great channel and he is a awesome guy at vice grip Garage channel
@gregbarnett3141
@gregbarnett3141 3 года назад
Great way to start a Saturday: coffee and Dr. O
@sterlingstephens7093
@sterlingstephens7093 3 года назад
Same here in san diego
@ghodgeco
@ghodgeco 3 года назад
@@sterlingstephens7093 me too
@CCFROMAN
@CCFROMAN 3 года назад
I miss the Dr. O intros
@markwarren7959
@markwarren7959 3 года назад
Finally, some brake cleaner sound effects. Whew! I was going through withdrawals.
@murphymmc
@murphymmc 3 года назад
After watching this, I'm certain I've never had a brake job done correctly, even when I did them myself. ;-) Love the dialogue, in full agreement.
@dejonsmall9886
@dejonsmall9886 3 года назад
Eric, just want to say that Mrs. O is a KEEPER!!!
@lordjaashin
@lordjaashin 3 года назад
and businesses are for supporting community not for burning and looting
@jimmy3le9plus
@jimmy3le9plus 3 года назад
The " people piss me off " part deserves a like 😂❤
@JosephArata
@JosephArata 3 года назад
Brakes are gravy train for the most part, unless you're working on light trucks or work/delivery vans. I think the reason why everyone likes watching them, is to see the different kinds of hardware and caliper designs the manufacturers use. It's easier for someone to do their own brake jobs at home on some jackstands in the driveway or garage when they have a general idea of what everything looks like and comes apart before they start taking it apart.
@MrWolfSnack
@MrWolfSnack 3 года назад
Just watch out when doing barn finds or vintage cars that you don't meet the wondrous invention that was asbestos brakes. They aren't dangerous to use - just dangerous for the guy working on them and breathing it in.
@GeminiSeven43
@GeminiSeven43 3 года назад
Thank you Eric for saying what most of us are feeling about humanity. Watching you work and deal with problems is like therapy for me and I try to take your work ethic and craftsmanship with me each day to work as I deal with daily mechanical/people issues. You are one of the Good Old Fashion Mechanics that we know and love. Thanks so much to you and Mrs. O for your videos.
@RichardHeadGaming
@RichardHeadGaming 3 года назад
My favorite was when they pulled up out front and honked for me to come to them, they always had a longer wait than expected. I never walked out to the car.
@terryharvey4811
@terryharvey4811 3 года назад
I do what anyone would do when someone honks their horn, I wave at them. I',m a friendly kind of guy. so I wave my hand not my FINGER.
@lwilton
@lwilton 3 года назад
There was a time, say 1930s to 1950s, when most gas stations had a hose that went Ding! when someone drove up to the pump, and then someone would come out to pump the gas, wash the windshield, check the oil, and collect the money. If a station didn't have the Ding! hose, or it was broken, it was proper etiquette to give a quick toot on the horn to announce that you were there. But that was about 80 years ago, and things don't work that way anymore. (And some jerk laying on their horn back then would also discover that nobody showed up, or when they did it was to tell them to move on and not come back.)
@Cheepchipsable
@Cheepchipsable 3 года назад
For some reason a lot of people enter the driveway, park at the end so no one can get in off the street, and block the workshop. One guy was told he would have to wait, so he locked his car in the middle of the driveway and walked off down the road.
@hungryjack8032
@hungryjack8032 3 года назад
@@lwilton really not that long ago. Still had majority of stations like that in the 80's. That all disappeared in the 90's when shop owners realized getting rid of two bays that produced $100,000 a year each could be replaced with food and drinks that produced $1,000,000 a year. Also went from two skilled pay jobs to three or four no skill jobs that could also extend hours.
@Todd66
@Todd66 3 года назад
If I had to take my vehicle anyplace for brakes, I would ask them...do you watch SMA vejeos?? If I hear a “no”...I”m taking it some place else or just doing it myself. A couple of years ago I thought I KNEW brakes and could handle any brake job. Then I started watching SMA vejeos and realized I had a lot to learn. Two years into SMA Brake Job vejeos and I swear I learn something every time. I love this channel.
@eightysea3780
@eightysea3780 3 года назад
"Nor do we want their sponsorship." Reverse psychology, very subtle Mr O.
@hungryjack8032
@hungryjack8032 3 года назад
HE can sign up to become a NAPA shop any time he wants. NAPA already has programs in place to do this.
@loutruckmd
@loutruckmd 3 года назад
I've been a mechanic for 42 years. I love watching someone else do a brake job.
@jmaxim80
@jmaxim80 3 года назад
I'll guarantee 99 percent of mechanics dont go to the extent that mr.o does when he does breaks. He's a true professional 👏
@baileyhatfield4273
@baileyhatfield4273 3 года назад
I've looked st what he does and thinks yeah...this seems like...what is right good smart and logical. So many mechanics I've seen just wanna get it done and ship it...yeah I'll spend the 5 minutes and do s good job
@davidwright1653
@davidwright1653 3 года назад
Forty years working customer service in retail has destroyed and turned me into a misanthrope by the truest of definitions. Wish I got a dollar for every time I was assisting one customer with others waiting, and the self entitled no time to wait individual interrupts with that "I just have a quick question". There's no such thing as a quick question in retail, or auto repair I'm sure. Best part watching your 613th brake job video; when you rambles on about the family. Busy as you are, it's awesome you take that important time with your kids, playing video games, whatever. It's just nice to see how simply grounded you are, and quite the inspiration for others. Faith in humanity in believe the phrase is called!
@mazdaman1286
@mazdaman1286 3 года назад
I have a standard phrase that I use on rude entitled people , it starts with capital F and ends with a little f. Some seem genuinely shocked that I react this way after they have haranged me in my own place of business in front of my old long standing customers. Still , it brightens my day and gives loyal customers a good laugh . 👍🏻
@TheUlrikkaul
@TheUlrikkaul 3 года назад
We call it the MeFirst generation
@thinman8621
@thinman8621 3 года назад
Ah, the little diagnostic helps like pinching the brake hose so the other side spins. That's what keeps me coming back. Thank you SMA
@snake1kl
@snake1kl 3 года назад
seeing Eric do a brake job and a bearing makes me smile and go to work easier next day:)
@bulldogsv2
@bulldogsv2 3 года назад
"You got to see how I diagnose bad wheel bearings, you got to see a toot around town, " and got to see Mrs O.
@lordjaashin
@lordjaashin 3 года назад
clowns running around in Portland are really grinding my gears
@jimclifford1241
@jimclifford1241 3 года назад
Yes, we weirdos love our brake jobs Eric. Keep em coming!
@darrenashley126
@darrenashley126 3 года назад
Hate it or love it, I just enjoy a non-pretentious American doing what he loves. Lets face it there's a lot of American mechanics who think they are gods gift on here. Well done mate, from Australia.
@BryanW916
@BryanW916 3 года назад
You DA man Eric! i've never met another mechanic that does THIS thorough of a brake job! Your customers really do get their moneys worth!
@frankstalzer2905
@frankstalzer2905 3 года назад
So you eric o and Scotty Kilmer and Chris fix are the only ones to actually watch to learn and understand and fix cars and trucks!!! 💪🏻👍👊🏻
@farmermiyagi1338
@farmermiyagi1338 3 года назад
I was trained in the military, and when the lining gets to the thickness of the backing plate, time to change them. ;) In my experience, when people go all the way to the bottom of the wear groove, they go ahead and chew up rotors too.
@hungryjack8032
@hungryjack8032 3 года назад
Replace the rotors anyways now. They are often times too thin to turn even once.
@farmermiyagi1338
@farmermiyagi1338 3 года назад
@@hungryjack8032 And most times anymore, if you do turn them, they warp even faster because of low quality metals. I hardly ever turn a rotor anymore.
@hungryjack8032
@hungryjack8032 3 года назад
@@farmermiyagi1338 Yup. And the two percent or less that get turned in the shop every year are done with an on the car lathe to get best possible outcome. For what a rotor cost nowadays, its often less expensive to replace them than to turn them. Sad.
@richardvastine7486
@richardvastine7486 3 года назад
What a delightful way to spend a Saturday afternoon! Outside chores done. Now its Miller Time and an SMA video to boot. Great afternoon in store. Thanks Mr. O. And to top it off.... BRAKE CLEANER returns.
@lorenzodelacruz1887
@lorenzodelacruz1887 3 года назад
I'm glad we were able to talk this out. My wife is looking at me though.
@kjbunnyboiler
@kjbunnyboiler 3 года назад
Best give Mrs O the keys to the gun cabinet🤣
@carygregory7772
@carygregory7772 3 года назад
My Saturday eating breakfast drinking coffee watching the dawg do his magic 🤣🤣🤣
@jonathonvanmeter4893
@jonathonvanmeter4893 3 года назад
Reminds me of when I stopped by to meet you and mrs o and the family. I remember the office having a couple people in there talking with you. You were doing your thing. I politely waited for you to greet me. Now after watching you rant. I’m glad I didn’t barge in and say hi I’m Jon from Ohio!Where’s my SMA stickers!!!! All demanding like!! I wouldn’t have anyways. It was the end of the day before closing. I felt bad enough to have kept you from going home on time. Thanks for your time SMA
@SimRacer96
@SimRacer96 3 года назад
more brake jobs and wheel bearings videos wouldnt hurt me i love em
@sparky1044
@sparky1044 3 года назад
No matter how many brake jobs I've done, always excited for a sma brake video. Can't explain why, I guess it's just soothing 😌.
@davidd8435
@davidd8435 3 года назад
I am fully entertained now, thanks Mr. “O”.
@freetolook3727
@freetolook3727 3 года назад
It isn't just brake jobs. It's the banter that goes with it!
@gmans2941
@gmans2941 3 года назад
SMA brake jobs are like jello there’s always room for one more!
@BruceLyeg
@BruceLyeg 3 года назад
Well put, poetic even
@wiuser1745
@wiuser1745 3 года назад
That's funny. I was watching and thinking to myself, "why are you watching a brake job"? Having done hundreds of them myself, I didn't think I would learn anything. That's when it hit me. Eric's vids are so good, I have to watch them no matter what he's fixing. So yes, there is always room for more, just like Jello. 👍🏻👍🏻
@sheeshalready
@sheeshalready 2 года назад
I used to think it was just the "new" generation that think they are special and entitled to priority treatment. But no, I see people from every age group come into the ER and think they should be seen before all the other people that have been waiting, and worse, are insulted when you tell them they will have to wait their turn. Some buy into the old saying, "squeaky wheel gets the grease", well, not always. Sometimes, we need to have security usher them out, they are so outraged by not getting seen first. About the several brake job videos, we just enjoy watching a quality repair job of every sort, and no two jobs are done exactly the same as the issues are often varied, as are some of the tools used to overcome these issues. Thank you, Eric O for your videos.
@robertgray6512
@robertgray6512 3 года назад
I love a good bearing and brake job with a bonus rant.
@edwardmissouri2216
@edwardmissouri2216 6 дней назад
I, of course, would never blame you for anything, but you mentioned not to ever do things just based on you tube videos. I agree in many cases. In your case, I will totally go by your directions because you are thorough and care about your customers!
@miketeeveedub5779
@miketeeveedub5779 3 года назад
53 years old here - I play Minecraft EVERY day. Relaxing thing to do after a day's work. Loved Lego's as a youngster too. BTW - June...and the lady's winter tires are still on? SHAME! That's the car equivalent of wearing your morning house coat at 5 in the afternoon!
@williamgagnonroadboxservice
@williamgagnonroadboxservice 3 года назад
Yes sir I’m 65 and still swinging a wrench and teaching 13 students a day and how to do the right thing the right way the first time and let’s not forget test don’t guess
@jamespfitz
@jamespfitz 3 года назад
I wear my housecoat and slippers to the supermarket
@waiting4aliens
@waiting4aliens 3 года назад
Quiet, competent, professional. Solid diagnosis, clean it up, renew it, lube it, locktite it, torque it. Yet we do not tire of it. In the real world all too often the exception to the rule. The extra 3 to 5 tenths Eric O takes insures almost no come backs. Just return customers. He is really lucky that as a tech he gets to work to his own higher standard. Remember he makes his own luck. Instead we live in a world of puke and run. But not at South Main. Thank you.
@roylwchez
@roylwchez 3 года назад
On the next Episode of S.M.A. "You know what really grinds my gears..."
@forevercomputing
@forevercomputing 3 года назад
Nothing, unless your gearbox has no synchroniser rings in which case, not double de-clutching.
@rnreajr9184
@rnreajr9184 3 года назад
I don't like doing brake jobs, but I love to watch your videos of *you* doing brake jobs!
@joeblank618
@joeblank618 3 года назад
NAPA is expensive. I priced out a brake job , they were twice what PEP boys wanted , and PEP gave me Wagner pads.
@chrisboucher9916
@chrisboucher9916 3 года назад
pretty sure you've taught me more than i learned in four years of high school shop class, Thanks !
@Sean0526a
@Sean0526a 3 года назад
I complain about that stuff at my job all the time. "do you not see the other person already in the room?" and don't call them out because then you're the bad guy all of a sudden. yep.
@Mike_Engel
@Mike_Engel 3 года назад
61 year old Minecrafter here.... wife is 58 and she plays too...!!!! great video
@viatronmac
@viatronmac 3 года назад
Another SMA nuts n bolts job....bliss! ASMR for gear heads :-)
@jerrydavis3462
@jerrydavis3462 2 года назад
Just wanted to say I enjoy watching you work and I like when you track down electrical problems, keep up the good work I'm disabled and can't do it myself anymore!!!
@TheOriginalDaveJ
@TheOriginalDaveJ 3 года назад
Thanks for the wee tour around where you work, pretty little place. Top tip for cleaning caliper pistons, paraffin and wire wool😉 Regarding clamping the brake line. Only type not to clamp is braided lines, that's the one's that get damaged. Cheers for another video full of good content, wit and humour. Stay safe and enjoy your weekend.
@johnasosajr
@johnasosajr 3 года назад
Just did my first break job on a 14 Cruz at my new job thanks for everything you do Mr O
@randycarpenter2914
@randycarpenter2914 3 года назад
Always on stand by for t great SMA.. We always learn something because it's a different vehicle or not just the simple job. Eric keep them coming when time allows.
@davidburton04
@davidburton04 3 года назад
Thank you thank you thank you for what you do even a 65-year-old guy like me learns a lot about engines and everything that you do you're a really good teacher
@robinsareolas
@robinsareolas 3 года назад
So glad I live in Texas where my vehicles don’t rust and rot away
@MrWolfSnack
@MrWolfSnack 3 года назад
But all your rubber and plastic parts melt and rot away from UV exposure and destabilization of the plastic.
@sirreginaldthe4th
@sirreginaldthe4th 3 года назад
@@MrWolfSnack Takes a long time, longer than rust takes.
@roycewoods9219
@roycewoods9219 3 года назад
I live in Texas and drive a 2003 Lincoln with no rust anywhere. I’m glad I don’t live where they use road salt.
@beluxauto5968
@beluxauto5968 3 года назад
Well Mr O , I am one of those persons who will tell someone that interrupts that they can leave through the same hole in the wall that they used to come in . If I am politely talking to a client , not even the King of Sweden has the right to interfere . I am king in my shop . Not the client . That´s because of all the years people have pissed me off with their little problems that so called only take a minute . Show respect and I will respect you back .
@stevenrice47
@stevenrice47 3 года назад
Does anyone say 'not a sponsor' when ever Mr O says 'NAPA'?
@bborkzilla
@bborkzilla 3 года назад
I say that when I say NAPA
@harryl7946
@harryl7946 3 года назад
🤣Guilty!🤣
@johnaclark1
@johnaclark1 3 года назад
*Raises hand
@williamgagnonroadboxservice
@williamgagnonroadboxservice 3 года назад
All the time!!!!
@glenjones6980
@glenjones6980 3 года назад
*Nods
@daleuharding7262
@daleuharding7262 3 года назад
I started watching his videos 4 yrs ago and haven't missed one since. I will say I miss the diagnosis videos
@shawn_530
@shawn_530 3 года назад
Oh baby!! Time to put on a pot of coffee and watch the new SMA video!!
@Black3ternity
@Black3ternity 3 года назад
Saturday, Great Weather, had a barbecue, stuffed full and now an SMA Video for the evening on the couch. Take care of yourself and keep up the nice work.
@BMan100
@BMan100 3 года назад
What!?! No hello viewers!?!…..okay I’ll let it slide this time because it’s a SMA brake video…
@plkracer
@plkracer 3 года назад
I love the closed captioning on this channel, we got a bad wheelbarrow! Learn something new every day 😆
@loz11968
@loz11968 3 года назад
Nice job. wondering what went on outside because I’m nosy like that lol sounded like someone dragging their exhaust down the street … Maybe a quick quiz see who guesses correctly haha….
@kimberg759
@kimberg759 3 года назад
Lol, i was thinking another car dropped off and ran, with a note inside!
@FeralPreacher
@FeralPreacher 3 года назад
Your attitude is totally understood. I love humanity, it's people I can't stand. Thanks for sharing.
@ItsaRomethingeveryday
@ItsaRomethingeveryday 3 года назад
I say alot of crazy things myself when working on cars, it's almost common place, lol, Liked the vid
@mv8mstraseapfcc113
@mv8mstraseapfcc113 3 года назад
It's the quiet ones that you gotta watch out for, but you never shut up. That's why I tune in. You're awesome! I bet you talk even when the camera isn't there. I know I do. I'm doing it right now!? I can relate to the spousal exchanges. Classic.
@dwoodog
@dwoodog 3 года назад
Never get tired of the basics.
@dailyfilmfix469
@dailyfilmfix469 3 года назад
"Hold on, we gotta wait for the Napper guy, not a sponsor."
@brand-x7049
@brand-x7049 3 года назад
It's both the work and the commentary we come back for. :)
@kennethhoovler9050
@kennethhoovler9050 3 года назад
I certainly appreciate that you take the time to bring us along, even on these "bread and butter" jobs. I'm sure running the camera doubles the time it takes to do these projects. Thank you for all the great content.
@DefaultName-vh3lo
@DefaultName-vh3lo 3 года назад
Your disclaimer is good, however, I gotta say, your advice related to DIAGNOSE the problem first, has really been a good for me. It's kept me focused on the way we must look at every job we tackle here in the shop. Thank You.
@halelorf
@halelorf 3 года назад
put some fuel hose on the end of the vice grip jaws and clamp away :)
@05milmachine90
@05milmachine90 3 года назад
43 years old and my oldest son got me into some Minecraft. He is 18 and doesn't play anymore....lol. It is a great creative outlet to zone out on every now and then.
@RobertRaudenbush
@RobertRaudenbush 3 года назад
The ' EVIDENTLY YOU DON'T KNOW WHO I THINK I AM" crowd
@darkdelta
@darkdelta 3 года назад
Glad to see I'm not the only one that gets pissed with most people today. Thanks for letting us look over your shoulder.
@aussiefirestorm
@aussiefirestorm 3 года назад
I was a nice to everyone man, then they turned my town into a tourist trap. So many self entitled jerks that frequent that style of establishment. I am now know as the angry mechanic.... have to channel Eric;s positive attitude more often to save my sanity....
@MrWolfSnack
@MrWolfSnack 3 года назад
Just don't take life so seriously. Focus on your own life and own problems, what everyone else is doing is not of any concern.
@donquijote6030
@donquijote6030 3 года назад
Another video of brilliant social...and mechanical commentary, Eric. We have become a people with wanton disregard for others. I have also noticed that fellas, and ladies, will talk right over those with whom I'm already speaking. Entitlement and narcissism are the problem.
@cwarlof
@cwarlof 3 года назад
I played Minecraft with my kids when they where into that game.
@lorrinbarth1969
@lorrinbarth1969 3 года назад
Best heat shield repair I've never seen.
@repro7780
@repro7780 3 года назад
I havent heard the Brake Kleen sound in so long, it kinda startled me, I'm not gonna lie!
@stevengullison5123
@stevengullison5123 3 года назад
Good morning Mr .& Mrs O.,I totally agree with you, some people are really rude. Keep up the great videos and thank you for taking the time to video. Sure it takes up a lot of your time. Steve from N.B Canada
@clubofseven7442
@clubofseven7442 3 года назад
18:50 Can I just say your Minecraft rant made my day, thank you
@WatchWesWork
@WatchWesWork 3 года назад
Don't tell the RU-vid comment section, but the FreyLube over by the tire machine makes a pretty good brake grease...
@WatchWesWork
@WatchWesWork 3 года назад
@Aussie101 It contains graphite, but so does Sta Lube and many other brake greases.
@baldobob7665
@baldobob7665 3 года назад
today people are "lovers of their own selves". (2 timothy 3:2) i agree with your comments
@davidsawyer1599
@davidsawyer1599 3 года назад
16:30 "Some day......" Aaah sorry there Mr.O think that day came and went. Seriously Eric hands down one of the few auto repair channels worth subscribing to. Thank you for your effort.
@LadyAnuB
@LadyAnuB 3 года назад
Mr. Safety puts his seat belt on as he's traveling down the road.
@starcarrier1874
@starcarrier1874 3 года назад
Eric you are so right about the discourteous interruptions while in mid-sentence. They’ve increased dramatically. The worst intrusion is when trying to complete a cash transaction. When I think I may be too critical, I recall my parents never tolerating that kind of behavior. Great video, I’m with you brother.
@paultro8457
@paultro8457 3 года назад
Yup, that's why I live in the woods. Hahaha you get more respect from the wildlife.
@ericroellig6704
@ericroellig6704 3 года назад
I work for $BIG CELLULAR PROVIDER. I work “behind the scene”. I’ve told my managers more than once “There’s a reason I work with equipment.”
@kazilziya830
@kazilziya830 3 года назад
Always enjoy getting little pointers on whatever project your doing , i pass it along to my son who is the mechanic now. Old school here and yes people can be real pain in the behind nowadays lol. Peace
@jstutz101
@jstutz101 3 года назад
Whatever happened to the old man with the electric scooter who used to occasionally stop by?
@blake8297
@blake8297 3 года назад
I was wondering the same thing the other day
@carlmiller1034
@carlmiller1034 3 года назад
Thanks for the great video! I always like to see the various techniques to remove a hub. Appreciate the thorough brake job too with all the proper cleanings and lubrications. Top notch and first rate!!!! Got a good chuckle when you mentioned the Lego games and now Minecraft. I play Minecraft Dungeons with my family. Funny how the muscle memory for the controller comes back quickly. Thanks again Eric!
@zexelM
@zexelM 3 года назад
I could watch brake jobs, wheel bearings and suspension parts replacing all day long.
@michaelparker5814
@michaelparker5814 3 года назад
I love brake videos they help me when friends come to me for help with their different cars in my area most shop do a lack luster job on brakes I'm state certified but I never went to school just learned from my grampa and dad it's my fun on the weekends
@richardbambenek2601
@richardbambenek2601 3 года назад
I agree with you Eric, people have lost their civility. Humans behaving badly.
@RezaQin
@RezaQin 3 года назад
I also was a fan of the Lego when I was a kid. Legos are always fun.
@clintharris1898
@clintharris1898 3 года назад
"People piss me off." Yep, that's why I don't work on other people's vehicles!
@janpur1417
@janpur1417 3 года назад
my 92 Corolla got 280K miles and it still got factory bearings on all 4 corners. Still spins smoothly! Even driven through 2 flooded roads too.Water covered half the wheel!.
Далее
Сказала дочке НЕТ!
00:24
Просмотров 1,1 млн
ВОТ ЧТО МЫ КУПИЛИ НА ALIEXPRESS
11:28
Мама знает где все документы
00:21
Honda Civic - CV Axle Snapped In Half
22:19
Просмотров 625 тыс.
Nissan Murano: Front Brake Pads & Rotors
17:52
Просмотров 114 тыс.
Dodge Dakota: Rear Wheel Studs & E-Brake Shoes
30:26
Просмотров 172 тыс.
Subaru Lost A Wheel On The Highway!
27:24
Просмотров 929 тыс.
Mazda 6 Press In Front Wheel Bearing
21:59
Просмотров 153 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,5 млн
Mazda 6: EXTREME Brake Rotor Removal 😱
14:07
Просмотров 436 тыс.
Сказала дочке НЕТ!
00:24
Просмотров 1,1 млн