Chevy / GMC Truck: Front CV Axle Replacement

Подписаться 898 тыс.

Просмотров 339 тыс.

50% 1

Let's see what it takes to remove and replace a front CV axle in a Chevrolet, GMC 1500, 2500 or 3500 4x4 pick up. These are a pretty straight forward job that most folks can do with some simple tools and a little bit of time!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

Авто/Мото

Опубликовано:

25 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 475

@baxrok2. 6 лет назад

Swapping an axle without even taking off the wheel? SMA Sorcery! lol Thanks Dr. O!

@MatHelm 6 лет назад

The sorcery of owning a lift...

@1969darr 5 лет назад

No need to even take off swaybar link. I have done it a few time on my 2500, For some reason my truck likes to eat drive axles on the drivers side only.

@ML-nd6qz 4 года назад

@@MatHelm, was going to say the same thing. Impossible not to take off the wheel if you're doing it on stands.

@cheddarcheesehead2799 6 лет назад

Thank you for showing the boring stuff, it all helps! Now go get Mrs. O a proper kitchenette and lighting, she deserves it for all that great looking food she's making you lol.

@DaveSender66 6 лет назад

That's true. Time for a office reno. I'm sure we could find several carpenter subs to reno the office in a weekend. Would make quite the video miniseries !!!!

@GarthGoldberg 6 лет назад

And she needs a new salad spinner.

@skokie23 6 лет назад

2nd that!!

@satamanschmidt3428 6 лет назад

I think the nearest Home Depot is in Rochester.

@cheddarcheesehead2799 6 лет назад

Joshua Carnine LOL! Are you mad because your mommy didn't cut the crusts of your PB&J?

@rhkips 6 лет назад

South Main Lunch Channel! Dang, this went smooth! Everything came apart super-easy, they sent you the right parts, and there was even a food-like item!

@mikemcgown6362 Год назад

First video I've seen where the wheel/tire, brake caliper and such were left alone. Makes sense to me to leave as much untouched as possible to prevent more damage. Sway bar links are easy enough to replace and make the project easier. You made it look so much easier than the other ones. Thanks for sharing this information with us.

@beryllium1932 Год назад

Looks like that is possible because of that flat plate which can slide clear instead of the shaft having to back out of a diff/tranny unit like most steel critters.

@BigDog50001 6 лет назад

Don’t let it get caddywampus and smash it down with your torque wrench. SMA words of wisdom right there.

@Peter-pv8xx 4 года назад

It's catty wampus actually, The definition of cattywampus, often spelled catawampus, is not lined up or not arranged correctly, or diagonally.so nothing to do with Cadillac.

@DaveSender66 6 лет назад

Awesome, your channel would make a great mini series on TV !!!! like the new intro. You're becoming quite the film maker.

@timothybarney7257 6 лет назад

How to replace a front CV axle, step one, see what the Mrs. is making for lunch, CHECK!

@kd741 4 месяца назад

🤣🤣🤣 for sure!

@cehuddl 3 года назад

Once again you do the best job of showing how to replace something. It is nice to see and hear all the real world experiences you have. Your my favorite auto repair guy!!! Keep up the great videos.

@seanphelan7271 2 года назад

@9:30 mark: Don't ya just hate it when you're busy and the big boss comes out and starts quizzing you? lol

@hawk5543 4 года назад

I love your videos. I keep learning stuff all the time from them. I have the confidence to work on my own vehicles from watching. One thing I am glad for is that I no longer live back east and the vehicles here in AZ don't suffer from rust.

@commando6188 Год назад

Thanks man I actually learned something on this video! I liked the detailed steps you were doing. A lot of RU-vidrs they fail to mention details.

@randomthings3334 2 года назад

My Sierra started clicking and believe its the CV axle , was going to take it down but hate spending all that money. After watching you do the job it looks straight forward and I will do it myself. Thanks for the video.

@abandonedcountry433 3 года назад

Thank you for the video! I love your channel, helps me everything I have to dig into my truck! I have to do both cv axels, sway bar links and bushings, brakes and an oil change. Thanks again for the helpful videos!

@ericcorse 6 лет назад

Pure gravy. My compliments to Mrs. O she always looks nice.

@martybeach6704 4 года назад

Good job, I like when quality work is done paying attention to detail and cleaning up the assy before reassemble!

@ogre350 3 года назад

About a year and a half ago i had to do this on my father in laws 96 gmc and this is the video i watched before i did it. Thanks for all the tips

@salvadordlicon9467 6 лет назад

I was about to roast you on only one side sway bar bushings. Nice save. Good video. Mrs O lovely as always.

@mr.h4714 6 лет назад

Looks whose editing skills are getting better and better all the time.... Not many folks understand what goes into a silly hand washing scene.....good stuff...

@larryjackson7816 6 лет назад

Bought a little astro 3/8 stubby gun the other day. It's great, thanks for making such great videos . Keep it up , love the tool reviews .

@marksealeycalibra 6 лет назад

Once again...Awesome work...love your videos...you explain what ur doing well and the camera angles/lighting are spot on...Very interesting.

@johnlee8231 6 лет назад

Always nice to see another installment of the Whats for Lunch segment. Nice quick gravy job is a nice change. t

@SuperJoes70 6 лет назад

Your the Man another 5 star video and Mrs. O making you another 5 star meal ! have a nice weekend you deserve it !

@popsshop2315 6 лет назад

I used to get those trucks brought in often with broken bolts from the customer trying to do it themselves and driving it in cockeyeyed. Not so many anymore but man people do love snapping those bolts. Great vid great tip on making sure it’s even!

@carlkraus6034 Год назад

Some day people are going to write books about the great work you do.

@dillwizard7516 4 года назад

Great video. Shows me exactly what I need to do. Mine is a 94. Thanks from BC in Canada

@MrDeenice28 3 года назад

I have to do this so thankfully you show something thats like an everyday driver in the rustbelt cuz other channels show a truck with no rust. I have hand tools so this should be fun!

@bborkzilla 4 года назад

The days before Mrs. O. had her own fully equipped shop!

@guapo1879 4 года назад

I love how you say you pissed and moaned about it...i thought i was the only one who said that! great video!

@Gt403cyl 6 лет назад

Just would like to say, I love my Astro 204, I got it about 4 maybe 5 months ago Solid unit for sure!

@mrsicivicdude 6 лет назад

It's funny, you say that we make it difficult sometimes. Still, you make it look easy most of the time!

@MaxDoody 6 лет назад

“Torque setting #3” 😂

@davjociestanski1587 6 лет назад

Eric there is something to learn from your video or the comment Watching you Channel learn a lot and good tip Tuesday too thank you for your time

@akawireguy1197 6 лет назад

Nothing better than a laundry sink in the shop for washing up in. I have one in my shop too. Get in there and lather up all the way up your forearms and rinse off without getting the stuff everywhere.

@klystron1 6 лет назад

thumbs up from London, England too! thx Eric!

@kevinhildreth2109 6 лет назад

Nice videos, love the Chevy pickups especially when you do Duramax ones. I wish more mechanics were that thorough and honest. Happy Holidays to you and your family.

@joshvavra1712 2 года назад

Jjjjjn7mmmuj

@Deerector 11 месяцев назад

I love his videos!!!! please dont ever stop making them.

@frdmstnggt99 6 лет назад

Not to be creepy Mr. O, but every time we get to see Mrs. O on camera it always is apparent to me how much she is into you... meaning how much she adores and has deep feelings for you. I hope that it is something you never take for granted as I wish my wife looked at me that way.

@Eastahtata 6 лет назад

That's depressing man. :/

@martingarza3383 3 года назад

I remember removing the cv joints on a 95' k1500 suburban without disconnecting the ball joints but you made look do easy 😁

@milkman99100 6 лет назад

Get that woman some lights!!!!

@mickmondeo 6 лет назад

Loved the intro!

@alexludwig4632 6 лет назад

Best service writer ever!

@simonhernandez9634 6 лет назад

ms.o with the cookin skills

@patrickprice2187 6 лет назад

Great job ,Mr o and tell Mrs o the fish looked very good and hope you both enjoyed your lunch

@wickedcoolname399 5 лет назад

Man, it's nice having a lift. The last time I did front end work I was on my back in the driveway with a couple of China Freight jackstands holding up my truck. I think I've replaced the sway bar links at least twice each side so far. That's what you get when you live on a road that's more pothole than road I guess.

@exoduslnx 3 года назад

You're a legend Eric

@robinsonsmotorcycleandauto3929 6 лет назад

Great Job Eric keep up the great work

@alexw288 6 лет назад

Thanks for the good tips Eric

@goodfellasinc.5648 6 лет назад

Crazy I just did an axle today took me 45 minutes real fun job you might be as good as me one of these days LOL good video

@Parknest 6 лет назад

That was an easy job. I had no end of trouble swapping the right hand driveshaft on my Citroen C4 Grand Picasso (French minivan). I documented it on my channel and it ended up being a 4 part saga. I had to dismantle more of my front suspension and brakes to be able to get the outer CV end free so I could remove the entire driveshaft. I'll need to replace the left hand one as well which should be a bit easier. We have the same corrosion issues over here in the UK when the local councils put salt on the roads in the winter months when the temperatures drop to freezing point.

@grahamstuart3207 4 года назад

Great Video Eric Love the GM videos you do :)

@bigrockk2980 6 лет назад

Love these videos, I have an 07 2500HD (gas) with 150000 miles so I know there is a good chance I will be doing this before long. I bought the truck 7 years ago from a guy that used it on the "pipeline" so I know it's had a tough life before I got it.

@Maxify08 6 лет назад

Yep, Eric. Your sink is an exact copy of mine, out in the shop. Home Depot/Lowes, discount, fiberglass, cheapest thing they had on the shelf, but it's not supposed to look like the one in the Master Suite at home. Nice choice!

@jimbola77 6 лет назад

excellent video there partner!!! you are a lucky man!!! happy wife happy life! way to go! God Bless.

@johnreid859 6 лет назад

One thing I learned from you a while back is to use MOOG suspension parts. Tried the others and regretted it. Thanks.

@tanoktenahua1665 5 лет назад

Thanks for the video, i was going to take the whole tire and breaks apart lol. This is much easier.

@rlmclaurine 4 года назад

Your awesome man. Thanks a bunch my truck is riding great.

@63256325N 6 лет назад

Nice easy one. Thanks for sharing it.

@rrmech11 6 лет назад

Cool intro What a wonderful wife you have Dr. O. Watching video before I go to work. Now I know that I'm having Long John Silvers for lunch. Fish sounds good.

@bigdaddypat3697 6 лет назад

Excellent Video MR O

@wyattoneable 6 лет назад

That was a good intro. Even the easy jobs have there place here.

@franwilson2097 2 года назад

thanks for the video,never done one,but looks fairly strait forward

@josephwash109 6 лет назад

The wheel bearing engineers watching will be happy to see that he torques the axle nut to factory specs!

@upnorthvlogs 2 года назад

I need mine replaced wish you lived in Minnesota yes it looks easy for the professionals

@rock1richful 6 лет назад

Woweeee that rust belt is something else on the vehicals u work on.

@ericryan1681 6 лет назад

Nice one. Thanks Eric

@Jesse-fz8pu 3 года назад

Thank you, buddy For your help and don't forget to thank you wife for all the fine cooking for you...

@garyliberty5492 4 года назад

Awesome video! Thanks man!

@halfton1979 6 лет назад

SMA before bed gotta love it

@brianthompson2045 Год назад

Uber helpful! Thank you again!!

@KDHUNTER2012 3 года назад

Awesome. Thanks for taking the time

@scottpearsontoolsmore185 6 лет назад

Great video thanks my friend. I like the way you work in all the light. I think your food would look better if Mrs O had some good lights. Great job and video thanks again. I didn't think you would do just one side of the link.

@andrewglover6433 2 года назад

Thanks for the video!!!

@michaelblacktree 6 лет назад

Eric O makin' it rain! (rust, that is...)

@zx8401ztv 6 лет назад

I really like the fact that you add protection to the cleaned plate, it all helps to make it a simpler job next time :-D. You cant stop the salt damage, but it can be slowed down a little.

@robertgreatsinger9179 Год назад

Thanks for work tutorial!!!!

@jimmydeen58 6 лет назад

Damn I’m blown away when I see what the rust belt states go through on vehicles, I’m originally from California, nothing like that rust out their, just your typical Fires and earthquakes, lol

@pfsantos007 4 года назад

Come to Canada lol scary stuff if not rustproofed!

@KD5VSV 6 лет назад

Like the intro and your lunch :)

@lonwillis783 6 лет назад

Good Job your the best!

@ryleyjhampton 3 года назад

Thanks for the video

@ukarin99 3 года назад

Your video is very helpful, as I figured I was going to have to pull a ball joint or both as figured the shaft slid in both ends, my stabilizer joints are about to break so good time to replace both ( ; thank you very much.

@mattfarahsmillionmilelexus 6 лет назад

Mrs. O knows how to cook healthy, a lost art these days.

@richardcabitto5108 Год назад

Kroil! Love that stuff! cheers!

@troyknowles2211 6 лет назад

Excellent video as always Eric O. Noticed the Astro nano being used. I picked one up from your store and it's already paying off... Also, thanks for your input on Subaru cv shafts.

@andrewwilson8317 6 лет назад

Nice work mate.

@Kletke84 4 года назад

Thanx! I just bought a 97 k1500 Chevy and need new boots. So now I’m going to just change out both sides with cv joints and sway bar end links. And new shocks cause that makes it easier to remove as well.

@toysareforboys1 6 лет назад

Amazing intro :)

@macgyver2417 3 года назад

Good tutorial. Thanks

@johanklassen3373 Год назад

Thank you I’ve had a hard time how to replace it that look pretty easy

@joemilton7552 6 лет назад

100k, yes sir, well done.

@MrRoy-rb1je 3 года назад

Outstanding!

@JLamond219 6 лет назад

Great job Mr. O......

@Johnny-vu7db 4 года назад

Good video. I saw you struggle with the sway bar links so on my truck I just cut them off in the middle with a grinder, and they fell out, since I was putting new ones in anyways.

@XYourexMyxSaviorX 6 лет назад

This video is helpful and comes timed well I have to do a replacement of a sway bar replacement in my 05 Astro it provides guidance on things to look for

@hammerhead19able 4 года назад

Thank you. Appreciate the video.

@robertkutz 6 лет назад

nice work eric.

@sebsbae9149 6 лет назад

Thanks again. Well done

@deapozol 3 года назад

I think you do very good and work and you are very detailed oriented for example, the way you cleaned up the flange and added some spray for ease of installation and maybe rust minimization. I wonder if other shops are that detail oriented and actually do a good job especially after charging what they charge some of them. Anyway, great work always.