Chinese 3M Clone mask 

You look like a handsome version of mr bean no homo

They sell them as original 3M masks on Amazon in my country 😅

I bought the Chinese 3m 7502 with filters from ebay 9 euros.(i use them for woodworking) . Original in shop costs 45euros. I can assure that for woodworking the chinese works like a charm.After hours of work, nothing can passes inside. And i will continue, changing filters more often

what size are you trying? and how much difference is there in sizes of 3m respirator.

Can you check to see if 3M filters attachments work?Do they work? Do you think a p100 Pink pancakes filters attachments work on this mask?

Thank you so much for sharing the info !

What's your input on the 3m 3200 type of mask

I bought that "Fake" mask actually, I bought it for about RM30 Malaysian Currency, idk yours soo. The mask itself serve a good air cycle all over its vent and the only problem is the Organic Vapour filter. Recomend me what kind of filter I should get, or I can just modified the layer of the original filter. Im started to get intrested when thinking about Oxygen tank, maybe I can modified it for best improvement?

The genuine 6200 straps adjust in the same place, it's kind of annoying unless you trim the extra but they also haven't loosened up at all so far so can't complain too much.

Supposedly if you press on the cartridge it blocks intake for a vacuum test.

You can actually negative pressure check 3m masks with bottle caps that you can get from mineral water bottles. I did it and it worked like a charm.

When I exhale and doing the positive pressure check is there air supposed to come out? I am not sure. Would like some clarification. Thank you.

Actually that chinese clone 3m mask is identical to real 3m 6200 half mask. Chinese don't make their own design, they faithfully try to copy 3M. I bought my 3M 6200 mask from home depot and it looks just like the chinese clone you have (but of course with real 3M trademark).

Cool video

Good grief lad! You are very handsome. Get amongst it.

Ok thanks

I work at a place that constantly has dust in it, all kinds of dust... at the end of the day if you blow your nose, the snot is kind of coated in black dust... what would you recomend I wear? It's a warehouse bu the way.

You can actually adjust the female 3m bayonet to its right shape with a retractable utility knife. Did it on my Chinese copy of 3m 603 because apparently 3m officially prohibits the sell of the original 3m 603 here in Malaysia. I don't know why.

I just got what I believe is a legit 3M 7502 - is it normal that while covering the 501 cartridge/filter cover holes, there is/would be some air intake through the exhale section? I have a secure seal but there is a small amount of air still coming in around the plastic 'flap' of the exhaust I believe. Is this normal? Would this be much of a real world concern (or would most intake with path of least resistance occur through the filter/cartridges in normal use)? Or am I just possibly not able to seal the holes enough on the sides like you also?

Which size are you using? I bought 3M 6200 half mask (size medium) and its really snug to my chins and cheek. 3M claim that a M sized fits 80% of the population. Are you using M or L ? The fit looks much better on your face than mine and my head is normal size for being a man.

just duct tape the inlets :P . works quite fine for that ;) . One warning to 3M 75xx masks; TRY one before buying if possible. i've bought M (medium) and ts a bit small for my face (despite the claims that M should work well for majority).

Hi mate, are you getting any others proper gas masks anytime soon. Also do u have any pets

Is it true that the original one has no sticker on it? I'm confused since it's hard to find a real 3M distributor in my country

I wonder, 6035 filters, Chinese, from Aliexpress -- bad idea? And are Chinese filters (and masks) counterfeit or they are just defective ones (that 3M throws away)?

Thank you for saving me from breathing in charcoal lol

Problem is I cannot get the 3m p3 filters anywhere now and I need them for my job

I got a Chinese copy of the 3m full face respirator from eBay for around $30 US, it takes 3m bayonet filters or 40mm gas mask filters

I just got my chinese respirator, they come with a really strong smell, like paint or something, i am assuming it might be the silicone but i almost feel unsafe breathing through it.. someome help? I am disregarding the chinese filter using P100 3m instead. Just the mask thats concerning

Oh

I guess its probably hit and miss? I brought a chinese one, and wasn't certain about it. After watching this video and others I tried knocking charcole out of it and non came out no specs of dust either. I then checked the organics filters the smart way ;) I got a makeup removal pad and put some nasty arse purfume and deoderant on it and placed it inside the plastic cover on the outside of the thin white filter thingy. I did that with both filters and then put the mask on and breathed throught it for a few minutes. I couldn't smell any scent and the air was fine. If I sniff the front of the filter makes me gag, but with it connected to the mask and breathing through that its fine. Still duno if I trust it though, I might get actual filters for piece of mind :/ maybe I buy real filters and take them apart and compare. (posted on right video this time, accidentally commented on the follow up video)

is the czech version of the israeli m15 any good?

Got one of those by accident it’s in the mails right now as I’m typing this lol and didn’t even realize it’s not real till I cross checked half way threw the video

What is the strangest gasmask you know?

Its just like mine except its real 3M and uses big pink filters

Can I use this clone 3m mask in coronavirus with genuine 3m filters? Whats your opinion? Plz respond

pity the filters are crap, but i suppose if you're on a very tight budget you can at least get a 1/2 price mask, but like you said might as well just buy the real thing as its not much more anyway

Hey how to decontaminate and reuse 6000 mask with 6035 p3 filter? For corona??

I got one off eBay that said "MC" on it in the pictures but it came in saying 3M on it but it still had that LA sticker on it. Why's this?

It seems like the mask is too big, or it needs to be tighten it down more.

I want to buy affordable mask for agriculture chemical substance but it is difficult to check which one is real or fake. Seller said 3M has factory in China that can be cheaper reasonably and still the real one. I have no idea.

The Chinese don't put 3M they put 4O just a joke

So i was guessing i had a 3m and i have a silly copy 😡

Do you have birds?

0.46 kilogram.. or about 1 pound

Hey I have a Vietnam era gas mask that I got from my mom's friend could I possibly send you a picture on social media I really want to know what it is.

Because 3m original is very expensive why not try the copy one which is cheap

Why would they give you painkillers for stuff that’s going around that’s the stupidest thing I’ve ever heard that’s like saying I need a Hydro for my headache

I bought the same mask and my filters work fine. No leaks and no smell whilst spray painting. I guess you got a dud with your purchase as with alot of stuff bought from china it's more often a hit and miss with regards to quality...

Now you have fake chinese clones of fake chinese clones of 3m

If you want good painkillers go on Ebay and look for Kirkland Naproxen Sodium they are awesome all that i could take when i cut my toe off.

This will ruin my hair style.

OMG....fake 3m?

First