Clean Throttle Body Nissan Xtrail T30 

Thank you 👍

When I do the code the engine light blinks but then stays on

@@haydenpantinary4855 scan to get the error code, you have sensor problem

For this process, i cant do by my self coz i dont have the tools, should go to the workshop with pressing machine 😁

@@jendroscreation Fair enough. This idle relearn didn't work for my 2006 XTrail. My idle rises between 1500 to 2000 revs.

@@osmoregulatoryorgan you should match the timing, use your watch

@@jendroscreation I did all that, but I did find that if the idle is running a bit high the relearn won't work. I tried a number of times. Timings were spot on. I gave it to the workshop this morning so they can complete the relearn and clear fault codes with scan tools. I gave it a good shot but now I'll be out of pocket $80 :(

@@osmoregulatoryorgan oh so you have the engine light ON, should clear the foult code then.

Thanks, maybe for next project 👍

Is it possible to apply for T31 2.0litr?

@@handymandiy6630 mostly to all Nissan

The error codes are related each others, TP and TB Minimum error from the relay (blue relay/throttle motor relay) from the relay box

@@jendroscreation I have problem with that, thank you to share me. I'll check it pak. Your videos really help everyone to solve fix the issues, awesome, thank you

Should with correct timing

You can try the steps

V belt and tensioner, mostly the vbelt. VBelt QR engine for T30 standard 6pk2247, use smaller 6pk2245 or 6pk2240

@@jendroscreation it's the 2l engine 140ps

@@vicentepallamare2608 sorry, no clue for the code, but you may search for the shorter vbelt

@@jendroscreation will check it out, thanks very much

Leaning more towards the engine mount

You mean the thermistor? You can search by online, 12V digital Thermostat.

no, I mean your aircond switch.

@@azamasrah7181 oh sorry, this is after market part, the model you can check from the link below Rp 68,530 16%OFF | Styling mobil kontrol panas Beralih AC Knob Aksesoris mobil aksesoris untuk Nissan Cerah Maret Baru a.aliexpress.com/_m0dWVel

tq sir

Switch tambahan tuk tambahan spare part

If surging after a throttle body cleaning. Get the engine up to operting temp. Start the motor, turn on the a/c, fan on full, also turn on the rear defrost and the idle will also set itself again, takes about 20 seconds.

What is the error code?

Controller, motor and gear

You may search for the aftermarket replacement, for other Nissan type

Such as s.lazada.co.id/s.mKPE7

@@jendroscreation thank you very much. this is very helpful.

You mean MAF? You can use MAF cleaner

High themperature? -Check both Fan and check the blow direction -Check the coolant, Radiator Cap, Water Pump, Thermostat, and the Radiator -Check the head gasket When the engine cool, open the Radiator Cap and run the engine, after ± 15 minutes try to hit the accelerator pedal and check the water flow in the Radiator, if it not flow fast means you have problem with the cooling system.

Some times the rpm cannot idling, always above 1000rpm

I think still not clear for the re-learning, use stop watch much better and until the engine light is blinking

Jendros Creation man trust me i did it perfectly. The MIL turns on, blinks, then goes solid. Wait three seconds & crank. I watched another video where he unhooks two coil & does the relearn. I did it his way. It relearned the idle, but when I plug them back in it does the same thing. Is it possible my idle air valve is plugged?

@@Pskawt re-check the coin of throttle body, check the pedal sensor (careful on the adjuster), torn air hose inlet

Ulang dari awal, pakai stopwatch lebih baik Urutan harus sesuai

If start and engine run only 3 seconds, MAF problem

Di scan ulang spy tau masih ada atau ngak errornya, kalau dah di solving tinggal hapus errornya, baru bisa learning idle

Aktivkan translate om

Normal om

Better use cleaner

Many causes Cek fuel filter (fuel tank), air filter Cek coil & spark plug Cek intake hose, is there crack or not Cek MAF, CMP, CKP Etc

Boleh aja, tp ngak maksimal

Mostly the same for Nissan, use the stop watch

Boleh 0813 8774 9280

Maksudnya salah gimana? Ada paking plat besinya lho antara intake dan TB

iya ada kak..tapi sensor engine detect position TB

po226

@@amazeingdudi4199 coba di idle learning dlu aja Step 1 dan 2 dalam kondisi mesin dingin. Step 3, panaskan mesin sampai suhu ideal lalu matikan, matikan semua kelistrikan termasuk tutup pintu, lalu mulai step 3 (learning). Kalau berhasil rpm akan balik normal.

@@jendroscreation dicoba kak..suwun

Step²nya kurang tepat, sampai indikator engine kedap kedip om

Saya ulang dari awal lagi ya om?

Sudah 20 detik lebih gak kedip2 lampu indikator engine nya om, kenapa ya?

@@VinoVito1622 timingnya ngak pas om, sesusaikan hitungan detiknya

Alhamdulillah berhasil om, rpm normal, tq 🙏

I cant 😅