CNC Router Woodworking - This Pisses Me Off!!!

Подписаться 74 тыс.

Просмотров 19 тыс.

50% 1

CNC router woodworking is an amazing craft for anyone to take up, regardless of what they do. I have seen many craftsmen and woodworkers take it up because their hands were hurting too bad from arthritis or lugging around large lumber from the mill.
Esp[esially for those who are going into retirement and looking for something new to do that is creative. This CNC technology, routers, lasers, plasma, 3d printing are all crafty ways to build a skill. And each one has its own skill to embrace.
This is not to degrade anyone with exceptional skills. It is to call out those who think they are too good to support someone who does not have a master skill but needs to express their own creativity. Encourage, validate, and celebrate!
#cnc #cncrouters #cncforbeginners
Phantom CNC Systems → www.phantomcnc...
-----------------------------------------------------
LONGMILL CNC ROUTER WEBSITE:
sienci.com/pro...
------------------------------------------------------
ROUTER BITS FOR CNC ROUTERS
→ 11pc carbide CNC router bit set (w/ free vector files) bit.ly/3d1iQnF
→ 1” Surfacing bit required for surfacing your spoil board: bit.ly/2QEYLKz
***Use this discount code (SURFACING BIT)
→ Glass engraving drag bit: bit.ly/3tRy98s
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: amzn.to/338MAt3
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
------------------------------------------------------
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ bit.ly/3d4WrEU
→ Vcarve Desktop → bit.ly/3D4CwjH
→ Vectric Aspire → shrsl.com/37pw9
→ Cut2D Desktop → shrsl.com/36xfm
→ Carveco (budget) → bit.ly/37rhVbY
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT
Starbond link: bit.ly/3g81RRU
---------------------------------------------
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: idcwoodcraft.c...
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): idcwoodcraft.c...
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: idcwoodcraft.c...
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: bit.ly/3rg4WTl
CNC ENTREPRENEURS: bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
------------------------------------------------------
Please support IDC Woodcraft RU-vid channel:
Buy me a cup of coffee: www.buymeacoff...
------------------------------------------------------
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: anchor.fm/cnc-...
------------------------------------------------------
Garrett Fromme
Facebook: IDCWoodc...
Website: www.idcwoodcraft.com
Email: support@idcwoodcraft.com

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 830

@garyalderman5163 Год назад

Thanks for the insight Garrett. words of wisdom is always appreciated.

@IDCWoodcraft Год назад

Gary, my pleasure brother!

@DJones-ue3ds Год назад

Garrett, Enjoyment is the greats skill. I had a true woodworker come to ask help on how to run a cnc. After working with him, he said running a cnc is a skill. Thnaks for all your hard work.

@IDCWoodcraft Год назад

D Jones, great points brother! CNC is definitely a skill.

@knottyash100 Год назад

Garrett, i totally 200% agree. I dont pay to much attention to social media, but I quickly tire of some of the negative comments. I really appreciate your channel and enjoy following you. I am a retired 74 year old and have taken the plunge recently and bought a cnc. Here in Austalia I managed to get one made here and am setting it up as we speak. I am using vcarve pro and gSender. I must admit I am a tad nervous as I near my first project. Keep going Garrett, I may well be screaming for help very shortly.

@IDCWoodcraft Год назад

Knottyyash, congrats on your first CNC brother! I am excited to see what you create.

@apachesim Год назад

Garrett .. Sounds like those making unhelpful comments are jealous.. I love your channel and it has helped me on my CNC journey in the UK. Keep them coming Mike

@IDCWoodcraft Год назад

Gunship, I'm so happy to hear my channel has helped you brother. Keep up the good work yourself!

@johnlohse2651 Год назад

I just watched your video on people that piss you off. The things you said I whole heartedly agree with. I'm just like you in the fact that I don't allow negativity in my life either. Your words are honest and true and thank you for sharing them

@IDCWoodcraft Год назад

John, very true my friend. Thanks for sharing your perspective on this one.

@gregrodney5139 Год назад

Garrett, I'm the guy who told you the story about the sewing! All I can say is this vid ROCKS! I've found that almost in every case the Nay Sayers are the ones with the least amount of talent, ability, or personal DRIVE to even try to achieve something. I always ask them if I can see some of their work in this field of endeavor...never hear from them again! I equate them to movie critics. When was the last time you saw a movie made by a movie critic. I'll get off my soap box now. Keep the vids coming.

@IDCWoodcraft Год назад

Greg, right on brother. Thanks for letting me use that story because it couldn't be more accurate.

@georgipraskov8223 Год назад

Now is the time to say Thank you! It is very difficult to find information about CNC tools and how to use them properly. There are thousands of types on the market, that's why your videos are very useful! It is also very useful to learn from someone who has experience working with these machines and tools because the manufacturers do not provide enough data.

@IDCWoodcraft Год назад

Georgi, you are so welcome my friend!

@thomasbreene893 Год назад

You are a good guy, man. That was one of the most righteous and proper rants about creativity -- let alone the CNC version of it -- that I've ever heard. I was a woodshop brat in high school, and I'm an amateur musician (bass player). My biggest project was to build a bass in woodshop, like back in 1981. I didn't finish it, but I came *really* close. Having just the knowledge that I was taught by my superb woodshop instructor, I *almost* succeeded in building an instrument I've been playing now for over 40 years. Everything you say in that video is spot-on, and also has an analogy in music. I've become pretty okay as a bassist, but I'm not a professional and probably lack certain skills required to be one (for example, having memorized a ton of jazz standards, or being a better sight-reader). And I totally GET when I'm seeing/hearing someone with those skills! I'm not so dumb that I don't recognize a Master. So, like you we're saying about master wood-workers: "I don't need to be told that I'm not at your level, or that I did something wrong, or screwed something up." I'm very well aware of that, because something inspired me, way back when, to learn how to play the instrument, even if I haven't risen to a certain level, and it was those same Masters! A CNC machine is an instrument. It's a device we use to express our creativity. I myself may not be the most accomplished, and I always welcome constructive criticism. But you're so right. Some people seem to exist mainly to tear other people down, to tell them that they messed up, that they *suck* at this, and so on. What a bleak life that must be! Patrolling Facebook to critique someone else's carve? (And by the way, I totally don't get the criticism of your beautiful carve. To me, I was like: Well, if he just flips it 90 degrees to the left, from my perspective, everything is right and proper. Stars and Bars are in the right place, etc. I would not have dreamed of that criticism in a million years!) Also, incidentally, your "Luthier's Bit Set" is pretty darned inspired, and I will be purchasing one soon! You totally got to the essence of what's required to carve those thick bodies!

@IDCWoodcraft Год назад

Thomas, wow I'm humbled by all the kind words my friend. Thank you for all of your support brother.

@beardedlocoswoodworks Год назад

Great video, your 100% right. 👍🏽

@IDCWoodcraft Год назад

Bearded, thanks brother!

@hoodooguru1450 Год назад

Some people seem to find it impossible not to criticize others work, and some people just cannot give someone any praise or admiration without quantifying it and it pisses me off as well. Back in the 80's, when I was in college, I had a friend that was an art student and could draw pictures that looked like a photograph, I was also into art but did not commit as much of my time to it as he did. I finished a drawing that I was very pleased with and showed it to my friend and returned with a backhanded compliment, "Not bad for catalogue work," he could have simply said nice job, he did it all the time. Love your channel!

@IDCWoodcraft Год назад

Hoodoo, you are so right brother. Very good points. Glad you have been enjoying the channel.

@kdubcreations Год назад

I am glad you touched on this. We all ventured into the cnc world for various reasons. We all have our own story. We never criticize the painter for the brush they use. Without creativity and the skills we learned along the way, its just another tool that would just sit in the corner. To anyone reading this, rest assured, the haters wouldn't even know how to turn on the controller. Thanks for the straight shooting video Garrett!

@IDCWoodcraft Год назад

Kdub, very true brother. Criticism in a negative way never helps people at the end of the day.

@MattMadeIt123 Год назад

I was in the Marines for 6 years. While a young PFC at Camp Pendleton I was ordered to the color guard for about 2 months. If you are on a Marine color guard, then yes, there are very specific rules about how to handle a flag. If you're making a piece of art like this, we all know where your heart and mind are. It's a very cool piece that evokes patriotism in a unique way. BTW- The view is from behind. So the girl in the carve is displaying the flag correctly. Some people are just wankers.

@IDCWoodcraft Год назад

Matt, very good points brother. I couldn't agree more!

@ravencraft_woodworks Год назад

The more and more I watch you, I get more and more impressed. Those are very good points on how people wake up and choose violence for the day, it must be miserable, I just Block them. I seen something similar where a creator in a shop was using his phone as his monitor on self mode, when you do that the image is inverted. And people missed the whole video just to get on him about his flag looked to be hung wrong in the background. Some called him everything but a woodworker. Your teaching style works for me, the way you engage just clicks with my brain and I have learned more real world skills in this, from you than any other. The first machine I ever seen I ran for superflow. I was one of three in the cabinet shop in 2000 ish and we got a 4x8 shopsabre with vacuum and it blew me away, at that time I was just getting a home computer, so it was so cool to have the job of running it. I always wanted my own machine and been a kitchen carpenter for 30 years I knew my way around a shop, but they were unreachable. I had a career ending injury 18 months ago and said hell with it and bought one, used recovery time to learn it and I feel that stupid machine saved my ass from self destructive loathing. I came across your videos while in the hospital and I truly was inspired to get that machine as soon as i could. Thanks, for the you tube university education...really thanks.

@WikiSnapper Год назад

You're absolutely right! I have been woodworking for 13 years. I have hand carved pieces with a chisels and been told by other people that I CNCed them when I didn't. In my experience the people that care about whether you carved it by hand, aren't willing to pay the price for things that are carved by hand and aren't willing to believe you did it anyways. Some people need to be contrary and wrong. I am new to CNCing. I see it as a useful tool to expand on my abilities as a wood worker and I am really enjoying learning about all of the technical things such as a down cutting bit not having fuzzies on the top surface and to not use them to bore holes unless I want to start a fire. I love all of this new knowledge. I appreciate every bit of what you are doing. Thank you.

@IDCWoodcraft Год назад

WikiSnapper, I couldn't agree with you more my friend. At the end of the day there will always be neighsayers no matter what you're doing. But, there will also be the people who can truly appreciate the work and effort that goes into your craft. It's important to know your worth brother. Happy cncing my friend!

@scottmoomaw6072 Год назад

Garrett Give’m Hell 3:42 brother!! Loved it! Keep doing your thing your way and the real people that make sawdust will keep learning and watching. Celebrate you!!!

@IDCWoodcraft Год назад

Scott, glad you enjoyed this video brother!

@Sparky6547 Год назад

Garrett, thank you sir!!! you are spot on!!!

@IDCWoodcraft Год назад

Ed, thank you brother. Glad to hear this video resonated with you.

@mikecooney7910 Год назад

As a 65 year old, retired engineer and CNC'er / novice woodworker I closely relate to your experiences and the enjoyment you get from being creative and learning new stuff. I have also had similar experiences with unsolicited negative opinions from a**holes. I just ignore them. Life is too short. Thanks for all you do. - Mike, Tumble Creek Woodshop, Cora, Wyoming

@IDCWoodcraft Год назад

Mike, very good points brother. I couldn't agree more!

@paulfrye6509 Год назад

Garrett I applaud you... it's about time someone spoke there mind to talk the negative crap in these forums... I am very new to this and I belong to a bunch of these forums and fir the most part people are pretty awesome and so will to help me.. but there is always going to be that few who think they are just better then everyone else... but in true fact no one is better then anyone else... thanks again Garrett for being so bold and speaking your mind...

@IDCWoodcraft Год назад

Paul, thanks for sharing your perspective on this one brother. I couldn't agree more about this one!

@williamstauffer1542 Год назад

Garrett, thanks for sticking up for all of us who have created sawdust, and some fireplace material, as we continue to learn and refine and be proud of our craft!

@IDCWoodcraft Год назад

William, you are so welcome my friend.

@gordontreber8790 Год назад

Garrett, You are the one that convinced me to buy my CNC by your honest and detailed presentations and I thank you for that. The huge learning curve is easier to navigate with you and your channel as a resource. The field of the flag is correct as viewed from the front as you stated. Keep it up.

@billymcgee5987 Год назад

Ditto

@IDCWoodcraft Год назад

Gordon, thank you my friend. I will keep up the good videos!

@chrispelletier3661 Год назад

I also got my CNC machine due to watching and listening to you! I know I’m creative, but I can’t draw or build a piece of furniture by hand, but I can create amazing things with a CNC machine! Thanks Garrett!!

@IDCWoodcraft Год назад

Chris, congrats brother! I am excited to see what you create with your machine.

@tonylopez6922 Год назад

I have a plasma table but modified it (on my own) to run a router. I watch your channel because you keep it REAL. I lost my mother to cancer, divorced, drank and got in trouble with the law all at the same time. My machine gave me a purpose, knowledge and a way to express my creativity. I love what I do. It gave me fulfillment. It changed my life...

@IDCWoodcraft Год назад

Tony, your machine must be a BEAST brother! I'm so happy to hear that CNC has helped you so much in your life my friend. Keep working hard!

@lucymolinar643 Год назад

Garrett, I appreciate your channel and all your support for those of us who are starting out. Your videos start from the beginning, giving us all the tools to succeed. Even nicer is that you offer your help from videos on every topic - to emailing you directly...there is no one that offers that kind of support. You keep doing what you are doing and there are a lot of us that appreciate you and will continue to follow you. God bless!

@IDCWoodcraft Год назад

Lucy, you are so welcome. I am so happy that my channel and all the videos have helped you in CNC. Keep working hard yourself!

@mrklean0292 Год назад

"THANK YOU!!!" What you are talking about touches on so many fields. I have been in the IT field for over 20 years and have come across so many people who have this attitude that they are better than everyone else and will trash anyone they feel doesn't meet their level of skill. Many don't give new developers, devops, testers, or anyone else a chance. I try to encourage others in things I am skilled at. I don't give advice unless you ask, just like you mentioned, with the exception of when I am training someone, and even then I would never act like an a-hole and constantly berate them. When I watch a video I always look to see what or how I can do something better than I can right now, and there are a lot of areas where that helps me.

@IDCWoodcraft Год назад

Mrklean, you are so welcome my friend. Glad to hear you and I see eye to eye on this one.

@jim2lmo Год назад

Thanks Garrett. These negative people don't deserve any of your time or attention. Your videos were the very first ones I had ever watched about CNC. You taught me how to do my first carve on my machine and because of that I now have a nice little CNC business that is growing and I just bought a second machine to keep up with the orders. Thanks for your hard work and the Sharing of your knowledge.

@IDCWoodcraft Год назад

jim2lmo, very true brother. I couldn't agree more! Keep working hard on your CNC business!

@randyb4006 Год назад

Garrett, I absolutely and totally agree with your rant and feel the same way about everything you mentioned in this great clip. Thanks, Randy

@IDCWoodcraft Год назад

Randy, glad you liked this one brother!

@propsandpop Год назад

Bravo!!!! What a great video!!! Thank you for all you do and for helping encourage us CNC enthusiasts!

@IDCWoodcraft Год назад

Props, you are so welcome my friend!

@adamdickson1921 Год назад

I'm with you Garrett. I see those posts, roll my eyes and scroll past. It frustrates me too, because I like many, like woodworking, but never manage to get everything just right. But with my cnc, I am now cutting stuff that looks awesome and has tight tolerances and I am so stoked! I enjoy creating and am proud with what I'm accomplishing

@IDCWoodcraft Год назад

Adam, I couldn't agree more brother. The CNC brings things to a whole new level for a lot of people.

@MOZOGuitars Год назад

Beautiful words and beautiful work, Garrett! Thanks for the positivity that you provide for this community. CNC on, my brother!

@IDCWoodcraft Год назад

MOZO, glad you enjoyed this one brother! Keep working hard yourself.

@kellychevallier4639 Год назад

Your wisdom is really appreciated. I have lost my company in the last year and I am lost. I started rebuilding my workshop. I enjoy the challenge of building something I have never done and I am at ground zero. Praying I can make this work or risk not feeding my children. Your word have helped inspire me.

@IDCWoodcraft Год назад

Kelly, thank you my friend. Keep working hard and focusing on building things back up. You will get there!

@LudwigSpiegel Год назад

Glad you think like that! Thank you for all your hard work and motivation!

@IDCWoodcraft Год назад

Ludwig, you are so welcome my friend. Keep working hard yourself!

@beatleleebailey Год назад

I'm with you Garrett! 👍

@IDCWoodcraft Год назад

Terry, thanks brother!

@MCB-LTD Год назад

Garrett, You are a great resource and you say things the way you feel which is very refreshing. Anyone making anything is awesome no matter how developed their skills are. If someone is trying to make then they are great in my book!!! There is an old saying that my grandmother used to tell me." If you can't say something good then keep your comments to yourself. Great video!!!!

@IDCWoodcraft Год назад

Michael, thank you brother. I appreciate the support!

@larrysimmons7084 Год назад

First off, thank you for your videos, they have been an enormous amount of help getting me started in CNC. I have been wood working for 30 years, and now have a second career as an IT person, so for me this was a perfect juxtaposition of two of my favorite things. That being said, it has still been a steep but very enjoyable learning curve. A CNC is just another tool, but one that gives you great precision and repeatability. I just don't understand people, most of whom would have no idea how to do this, who seem to think that they have been appointed the official deciders of what is "actual woodworking". All hobbies seem to have these self-appointed critics for some reason. I say embrace those who support you and just scroll on by and ignore the people want to tear you down.

@IDCWoodcraft Год назад

Larry, you are so welcome my friend. I couldn't agree more about what you said. CNC is such a skill and a passion, it is 100% real woodworking!

@1960fusion Год назад

Bravo, unless you have something nice to say, keep it to yourself...its a great carve! Local kids bring projects by my house when they see me in the garage bulding something and they are so proud of their project and as rough as it is, i always build them up and tell them what a great job they did...their smiles are priceless!

@IDCWoodcraft Год назад

1960 fusion, I couldn't agree more brother. Glad you like this carve.

@jasonfoster8249 Год назад

Awesome carve. All I know is that no matter what side it’s on, someone is going to say it’s the wrong side. Well done! Thanks for all your videos. You have literally taught me everything I know about cnc work. Keep up the great work! 👍

@IDCWoodcraft Год назад

Jason, thank you brother! Keep up the good work yourself!

@dllcontacts9799 Год назад

I love that you've kept the absolute beginner in mind with your videos. I've had my CNC since the new year and have enjoyed watching countless hours of videos and tutorials. Being retired, I love a new challenge and have put the 9 to 5 mindset IN a box and threw it out. You've inspired me to put in the time to learn and attempt projects with the CNC. Software learning curve is steep but doable. I'm from the old school and we used to say, "If I want your opinion, I'll beat it out of you" Keep up the great work!

@IDCWoodcraft Год назад

DLL, congrats on your new CNC. I am happy to hear that my videos have inspired you to jump into CNC and find something that helped you get out of the 9 to 5 mindset!

@jeffreymartin5944 Год назад

Hey Garrett, speaking from a former Marine perspective your carving is perfectly fine in my book. The key which you can ask any former military person is the Stars are at the beginning of the way the wind flows through the flag (i.e. the stars are always starting at the front of your car with the flag flowing to the back). Love the design and people should be more encouraging versus criticizing. Life is too short to be so negative in your life, look at the good in all and embrace ALL our diversity and experience. Love your channel...please keep up the great work!

@IDCWoodcraft Год назад

Jeffrey, very true my friend. I couldn't agree more. Keep up the hard work yourself.

@johnroberts2729 Год назад

Great rant. Also a true woodworker, artist, musician....creater will use any and every tool at their disposal to bring their ideas to life.

@IDCWoodcraft Год назад

John, true that my friend. Couldn't agree more!

@TheKirk48 Год назад

I live in Michigan and I don’t have a heating shop, so it’s been several months since I CNCed. Yesterday I came out fiddled with getting the shop set up and decided a sign was needed, I turned on the CNC opened VCarve Pro, and realized I had forgotten how to make a sign. I just brought up a IDC UTube video and in a couple of minutes I was off and running. Thanks Garrett for all you do.

@IDCWoodcraft Год назад

Steve, right on brother! Happy to hear you are back in the shop figuring out things again.

@cayleewhite3828 Год назад

I appreciate your videos a lot. We got a CNC machine at work and they told me to set it up and figure out how to use it, I started just guessing but your videos enabled me to use the machine much better! it went from being a hard annoying task to something I enjoy at work. I was able to make all of our recreation and fire crews their logos. A lot of the stuff I have made Isn't very good but everyone who has received something has been stoked regardless, so thank you for making these videos that have helped me grow in my CNC machine abilities.

@IDCWoodcraft Год назад

Caylee, keep working hard! I know CNC can be tough at first but it sure sounds like you got the hang of it and you are well on your way!

@daviddanboise1601 Год назад

Garrett you are not wrong in this whole video. I work part time at a local hardware store and I run into individuals who ask for your input , and then will stand there and criticize the help you are offering them. I just let them rant and nicely suggest they do it the way they are see fit and walk away. Your efforts and teaching are awesome Garrett. Thank you for speaking out. I support you and have similar experiences. Keep up all your hard work. It helps the majority of us in this CNC world. Ignore the ney sayers.

@IDCWoodcraft Год назад

David, will do brother. I'm so happy to hear you liked this video and thanks for sharing your perspective.

@calphis Год назад

Appreciate what you're doing to lift up craftsmen and CNC entrepreneurs. Your enthusiasm and encouragement have helped a lot of folks I know

@IDCWoodcraft Год назад

The Wizard, thank you brother. Keep up the good work yourself!

@timadams7274 Год назад

I just finished and delivered my first job. During design, I reached out to a few friends and one of them gave me a good piece of advice. “You’re the artist.” I don’t think I will ever unhear those 3 words.

@IDCWoodcraft Год назад

Tim, couldnt agree more brother. You are the artist!

@waynebussert5180 Год назад

Good Job Garrett, No matter what you do there is always people that want to put you down or degrade what you did. If you take the lady rotate 90 degrees to the left the union is on top and she is flying leading the way. Good job you the man.

@IDCWoodcraft Год назад

Wayne, very good points brother. I couldn't agree more!

@rizkine Год назад

Hi Garret, I’m from Indonesia, I have learn a Lot, got a lot of knowledge about CNC from you… thank you.. Those who ever has negative thought will always be negative, just ignore them…. 👍👍

@IDCWoodcraft Год назад

Ridzeki, keep working hard and learning everything you can brother!

@bradkizer9961 Год назад

My grandmother had a saying; Misery loves company! As I have mentioned in public and private, you and your company are a true asset to the CNC hobby. Thanks for all that you do!

@IDCWoodcraft Год назад

Brad, you are so right on this one brother! Thanks for sharing your perspective.

@walterzeranski7289 Год назад

Spot on Garrett!

@IDCWoodcraft Год назад

Walter, glad you liked this one brother.

@JoseRodriguez-zx8fu Год назад

Garret, I found your channel a while back and you inspired me and taught me a lot from your videos. Thank you for continuing to teach us noobs. Haters will always be haters.

@IDCWoodcraft Год назад

Jose, keep working hard brother! I look forward to seeing where your CNC journey takes you.

@codyelkins4985 Год назад

Thanks for the video Garrett!!!

@IDCWoodcraft Год назад

Cody, you are so welcome my friend.

@davedietz8726 Год назад

Amen Garrett, Amen!! Thanks for these words of encouragement.

@IDCWoodcraft Год назад

Dave, my pleasure brother! Happy to help!

@deannep3419 Год назад

My husband and I purchased a millright cnc to further his hobby making automata. We had no idea what we were in for..the amount of skill not only putting it together, but getting it to work is incredible. I am thankful we work well together and very thankful for what you have provided in your videos, without which we would not be cutting at this point. It is a skill, an art and a great deal of fun when it comes off the machine. We look forward to what lies ahead….

@IDCWoodcraft Год назад

Deanne, it sounds to like like you and your husband are off to the right start my friend. I am excited to see where your CNC journey takes you!

@roballen960 Год назад

Amen Garrett. You nailed it!!

@IDCWoodcraft Год назад

Rob, thanks brother. Glad you enjoyed this one.

@JasonKunda Год назад

Been on a CNC for a year now and never looked back. It is an amazing journey and Garrett's videos helped so much. That flag reminds me of going to a friends house on a hot day by the pool and one of the ladies stood up, grabbed a flag towel to dry off and run in the house. I happened to snap a pic with the phone and carve it the next day. Take a fun day with friends and transfer the memory to CNC.

@IDCWoodcraft Год назад

Jason, I'm so glad to hear you have found CNC and never looked back brother! Keep working hard.

@jayt7861 Год назад

That’s a wonderful video brother Garrett. Keep up the good work and show the haters they are wrong with there ego.

@IDCWoodcraft Год назад

Jay, thank you brother. Keep up the good work yourself!

@rogers8581 Год назад

YOUR RIGHT! THANKS FOR YOUR VIDEOS. I stand behind you and agree to what you say in this video. Everyone that does CNCing as great work. We learn new things every day in this hobby or business. I'm still learning and I'm not bad with my projects. It's taking me 8 years to know what I know now. Your Videos made that happen. KEEP HELPING US!

@IDCWoodcraft Год назад

Roger, you are so welcome my friend. Keep up the good work.

@tylersmith3201 Год назад

Garrett, I appreciate all the helpful videos and advice on CNC routing. The project looks great and looking forward to improving my skills to produce a similar project.

@IDCWoodcraft Год назад

Tyler, glad you liked this project brother! I am excited to see how yours turns out.

@rick21668 Год назад

Loved this video!!! Thank You Garrett!!

@IDCWoodcraft Год назад

Rick, you are so welcome my friend.

@deanberg9249 Год назад

Ha, I remember that comment and thought the same way as you. I bought a long Mill based on your great reviews. Keep up it up Garret, many people appreciate your hard work.

@IDCWoodcraft Год назад

Dean, thank you brother! Keep up the hard work yourself!

@ibcwhite Год назад

I'm with you totally! So many people feel entitled to impose their thoughts/beliefs about something that has NOTHING to do with them! Those people are miserable on the inside and attempt to make themselves feel better by denigrating others.

@IDCWoodcraft Год назад

C-Dub, you are so right my friend. I couldn't agree more.

@roddychisholm552 Год назад

When and when not to listen to negative people is the masterpiece.People saying stupid thing can be useful. Your info is good Thank you

@IDCWoodcraft Год назад

Roddy, I couldnt agree more brother!

@denispinard8120 Год назад

Keep the good work Garrett, These negative people try to start a negative club and don't succeed because they are too negative

@IDCWoodcraft Год назад

Denis, thank you brother. I will keep cranking out the videos to help you!

@ShoHashi Год назад

Well said, Garrett! I've had my CNC almost 5 years and am still learning things with it! :) Appreciate your channel!

@IDCWoodcraft Год назад

ShoHashi, thank you my friend. I am so happy to hear you have been enjoying all the other videos on the channel.

@todds4101 Год назад

Had a chance to watch the video! Very well said! You always do a great job with all of your content. And there's always going to be haters out there. Full of themselves assholes, narcissist bastards that are out to make everyone else as miserable as they are. They are the ones who always have an opinion, they know best and will tell you how damn good they are, and are quick to pick out fault, but when it comes down to it they've either NEVER done it themselves OR they have an excuse why they don't do it. See it all the time. Strong work on the piece, Garrett. It really is a nice carve.

@IDCWoodcraft Год назад

Todd, thank you brother. I couldn't agree more!

@michael-m-de1ck Год назад

Hi Garrett, You're most welcome. It's really good to see there are many people that got behind you on this unfortunate incident to give you some moral support and to show you that not everyone is tarred with the same brush. Now, it's water under the bridge, and time to move on and continue doing what you do best. The Lady and the American flag actually looked really good, I would have been very happy if I had done that on my CNC machine. Talking of doing a 3D on my machine, I sent you a message regarding the open book 3D carve that you did a short while ago, hopefully, you can find a few minutes to have a look for me. If anyone else reads this message, Please continue to encourage and support Garrett. Regards, Michael

@IDCWoodcraft Год назад

Michael, im glad you enjoyed this one brother! Keep working hard yourself, I will be emailing you shortly.

@worrallswoodcrafts4366 Год назад

Garrett, your videos as well as having the chance to speak with you directly on the phone is what convinced me to purchase the Longmill. I have been a novice / hobbyist woodworker for the past 40 odd years and the age of 61, purchased a CNC. I do have some computer skills but was completely new to the CNC world. Your encouragement and enthusiasm convinced me I could do this. Btw, if you turn your carving lenghtways with the woman's head to the left of you......the union is in the proper position. :) Thank you, and we appreciate you.

@IDCWoodcraft Год назад

Worrall, congrats on your new Longmill brother! I am excited to see what you create.

@onefinity-trainingtipswithMitz Год назад

Damn Garrett!! I couldn’t agree with you more!!! There are many who just feel it’s their duty to burst other people’s bubbles…Thanks for bringing up this subject…it happens way too often… I just block them so I don’t have to deal with their negativity more than once!

@IDCWoodcraft Год назад

Onefinity, thank you brother! Nobody needs negativity like that in their life.

@hurdyg1 Год назад

Garrett, Thank you for this, I love your carve. keep doing what you are doing.

@IDCWoodcraft Год назад

Brue, you are so welcome my friend. Keep working hard yourself.

@daleesalinas474 Год назад

Garrett, this is so true and thank you for saying something about this, but of course those people still won’t get it. Your awesome and thank you!!

@IDCWoodcraft Год назад

DaLee, you are so welcome my friend. Keep up the good work!

@jonwoodworker Год назад

I look at it this way, if you are creating or fixing something, you get a thumbs up to me. I've seen some horribly items made but still gave a thumbs up, because they are making an attempt to do something or make something. We need to get back to encouraging people to work with their hands. Things will always need to be made by people.

@IDCWoodcraft Год назад

Jon, I couldnt agree more brother!

@tedlitz7266 Год назад

Right ON , Garrett

@IDCWoodcraft Год назад

Ted, thank you brother!

@simonchambers3900 Год назад

Garrett, Everything has a price and that includes success. Some people don't have what it takes to achieve what you have achieved so its much easy to bring you down than put in all that hard work to elevate themselves. I am new to cnc and I love it, you have taught me so much and every bit more I learn the more excited and alive I feel. Keep doing what you do mate and forget the losers.

@IDCWoodcraft Год назад

Simon, very true brother. I couldn't agree more. Welcome to the wonderful world of CNC!

@crystlerichards3527 Год назад

thank for the encouragement

@IDCWoodcraft Год назад

Crystle, no problem! Keep working hard my friend.

@tomcollick8111 Год назад

Garrett, I love the design. Keep it all going my friend.

@IDCWoodcraft Год назад

Tom, glad you liked this one brother!

@joehamblin3297 Год назад

keep doing what your doing. The thing I like the most about CNC is learning how to do something new. Different ways to setup a job etc

@IDCWoodcraft Год назад

Joe, thank you brother. I will keep working hard to delver videos that help you early in your CNC journey.

@sawdust1 Год назад

Thank you for making this video. You encouraged me to start my woodworking dream. You are 100% correct. ❤❤❤

@IDCWoodcraft Год назад

Sawdust, keep working hard brother! Glad you enjoyed the video.

@samg4787 Год назад

Well said sir! It is quite the curve and any forward progression should be celebrated.

@IDCWoodcraft Год назад

Sam, I couldn't agree more brother!

@billvan6277 Год назад

Great video, I've just begun my journey with a small CNC router. I'm 3 projects in and I appreciate your video so much. I'm a subscriber now, thanks so much!

@IDCWoodcraft Год назад

Bill, congrats on your first CNC brother. I am excited to see what you create.

@WilliamStillwell-tr8fx Год назад

I’ll add another “Thank You” to you Garrett. I picked up a Longmill about 6 months ago, all because of you and this channel. The level of detail and attention you have given throughout all your videos have helped countless people go from absolutely no knowledge to a beginner/intermediate level with ease. Keep doing what you are doing and leave other’s negativity in the rear view mirror. After seeing so many of your videos, learning so many different skill sets , the thing I have come to understand… You are only limited by your own creativity!

@IDCWoodcraft Год назад

William, you are so welcome my friend. Congrats on your new Longmill! I am excited to see what you create with your machine!

@lynnnewell4909 Год назад

Way to go. There are so many negative people in the world. It is definitely a skill to learn these machines and the whole design program. Love your easy to follow informative videos.

@IDCWoodcraft Год назад

Lynn, very true my friend. Glad you are enjoying the videos.

@billmartin6687 Год назад

Thank You Garrett for making this video. Our church was celebrating 50 years of getting a new roof, I decided to engrave on my CNC machine some of the old roof tiles which I salvaged. I had the name of the church correct but was told that the cross I engraved was wrong. The church is in Scotland and we have many different interpretations of the cross. According to the so called expert the cross was wrong but in my eyes it was correct. Until I saw your video I was going to throw them all in the skip, now they are going to be handed in on the day of the anniversary . Thank you again for giving the confidence to go ahead . please stay safe. Bill M8-) Scotland

@IDCWoodcraft Год назад

BillMartin, that is one heck of a story my friend. That sounds like an amazing project. I am excited for you to show your church what you made!

@tomcook5824 Год назад

Loved this video! There’s just some people who will look to put others down so that they’ll feel better about their meager lives. Absolutely love how real you are. Keep the good work coming! You’re a good man Garrett! I consider this your best video!!! And I’ve watched a LOT of them.

@IDCWoodcraft Год назад

Tom, glad you enjoyed this video brother! Keep working hard yourself.

@southofthenorthwind2457 9 месяцев назад

Some people just aren’t happy unless they are A-Holes! Thanks Garrett for all you do!

@IDCWoodcraft 9 месяцев назад

Southofthenorthwind, couldnt agree more my friend.

@davidtroncoso9313 Год назад

Garrett I have never chimed in but now I will!!! I just received my Phantom CNC SCV 44 today!!! You are absolutely correct! People are Dicks!!! I have worked my ass off (as an old man) to get up to speed to make things on my laser, 3D printer and now my second CNC. All of it was tough! Nothing in this world is easy. All I can say is we all feel the same. Celebrate our accomplishments and move forward (Positively) one step at a time!! Thank you for all of your knowledge that you share!!!!!

@IDCWoodcraft Год назад

David, congrats on your new CNC brother! I am excited to see that bad boy rip and what you create.

@normanstreeter5206 Год назад

Absolutely been there, Garrett! I worked a community market last summer, and found one yardbird who came by periodically and criticized my work. I wound up suggesting that he go to WalMart. Thanks for your videos and time.

@IDCWoodcraft Год назад

Norman, that is quite a story brother. Sorry to hear that happened to you!

@gwargolet Год назад

Thanks!

@IDCWoodcraft Год назад

Glenn, thanks for the support brother!

@gottalikenick Год назад

I’d like to give you a huge thank you from Miami, FL!!! I remember sending you a picture of my first inlay and your kind words meant a lot since I basically learned EVERYTHING from watching your videos! You really have a big impact in this industry and your help/support is mainly what keeps me coming back and wanting to learn more from you. You will always come across jerks in the world, who are completely oblivious that they are unpleasant to interact with. It’s hard to filter them out right away some times. Sorry you had to make a video about this. Buy once again, THANK YOU FOR BEING HOW YOU ARE WITH YOUR CNC FAMILY!

@IDCWoodcraft Год назад

Nicholas, you are so welcome. I am so happy to hear my videos have helped you so much.

@mason.berlin Год назад

couldn't agree with you more! I have been getting a lot of views in my recent videos, and with that has come the same thing. the same kind of comments. I've been meaning to make a similar video, because the issue has really pissed me off just like you. Thanks for speaking to this! "its never about the skill, it about the fullfilment" exactly! good rant!

@IDCWoodcraft Год назад

Walter, thank you brother. I appreciate you sharing your perspective on this one too brother!

@brucemunro9623 Год назад

Couldn't agree more, Garrett.

@IDCWoodcraft Год назад

Bruce, thank you brother. Glad you liked this video.

@chesneyamroodt7770 Год назад

Hey Garrett I'm a qualified cabinet maker, a supervisor at an international super yacht building company in Cape Town, South Africa. Been a cabinet maker for over 40 yrs but learning about and building my own CNC is way above the experience I've had through all these years, love your work input and valuable insight, that's a gem for me. All the best and best regards, from Chesney.

@IDCWoodcraft Год назад

Chesney, I am so happy to hear that my videos have been helping you get into CNC. Keep working hard brother!

@mattivirta Год назад

very easy made DIY own cnc machine and lot cheapen than all sell lot worst machines, etc onefinity machine, worst machine ewery normal men can build 4x cheapen same or better machine easy simple job, i has build my own machine less than 1000$ but have lot better than onefinity or many other brands machine who cost 4-5000$ only idiot pay 6000$ totally small and worst cnc machine when same machine can make DIY less than 1000$ sure,

@timguernsey8030 Год назад

EXCELLENT as always. Thank You.

@IDCWoodcraft Год назад

Tim, you are so welcome.

@todds4101 Год назад

Great video! I have yet to watch the whole thing. My mind is a tangled web of stuff that I have to get done this week, so distracted I am, but I hear you on this topic, brother. I usually find that it's the individuals who are jealous of what I created who are first to comment. I find that it's rare for experienced makers to comment unless, like you mentioned, you're looking for feedback.

@IDCWoodcraft Год назад

Todd, thank you brother. Keep working hard my friend. I'm glad this video gave you a new perspective.

@rickkinney1249 Год назад

people around the world will always put their opinions ahead of the learning process---you are advancing yourself with cnc just like cabinet makers before found that table saws, jointers,planers,drill presses etc etc advanced their ability to DO GOOD WORK and still meet expectations of the BUYING public----people need to keep their opinions to themselves unless they are ask for it good video, rick (my opinion----keep going strong)

@IDCWoodcraft Год назад

Rick, very good points brother. I couldn't agree more!

@aussiecnc3dmachining Год назад

Well said. As long as your happy with your own work it doesn’t matter what these others say. Doesn’t matter if it was upside down as long as you like it. Looks great mate. Love your work. 😊❤

@IDCWoodcraft Год назад

Aussie, exactly!!!! Thank you

@mikepeterson8663 4 месяца назад

When you spend 40 plus hour doing a rendering for a screen door, my customer was blown away. I agree with you totally, good on you.

@IDCWoodcraft 4 месяца назад

mikepeterson8663, That's fantastic to hear! It's always so rewarding to see a customer's reaction to your craftsmanship. Keep up the great work!

@davedavis7937 Год назад

Great job, and great video Garrett!

@IDCWoodcraft Год назад

Dave, glad you liked this one brother!

@AngieWilliamsDesigns Год назад

I definitely agree with you on this. I’ve had this happen. I’ve made things with my cnc and my laser and been told by someone they really liked it. Then asked me how I learned to use the scroll saw. Then…. OH… I thought you made it. LOL. We are all makers. We might get there by a different path. But as you said… it’s about our own individual journey.

@IDCWoodcraft Год назад

Angie, sorry to hear this happened to you too! Keep working hard, I am excited to see where your CNC journey takes you.

@marriedwithchildren-familylife Год назад

Thank you sir! I am, at ground zero of learning to CNC. I mean REALLY at ground zero! I am going to learn CNC first by building my 'own' custom CNC machine; my hopes are that I will more intimately learn by building my own vs. buying a ready-made CNC machine. So, my hat off to you! I am 62 and know absolutely nothing about CAD/CAM software or CNC'ing but I do have a basic understanding about the X,Y,Z thinking that goes into this art. Before I run on any further, I'll just say thank for your straight forward no bullshit zero tolerance way of doing things.

@IDCWoodcraft Год назад

Bryan, congrats on your first CNC brother! I think you are off to a great start building your own machine. I am excited to see where your CNC journey takes you.

@markgrimm3564 Год назад

boy houdy it's all about self gratification what makes you feel good didn't even notice that about the stars on the other side didn't care the ability to do it on the CNC is wow factor for me .good job that why i'm a subscriber the fact that you so generous to share your knowledge .thanks so much garrett

@IDCWoodcraft Год назад

Mark, I couldn't agree more about this one brother! You are so welcome for all the videos brother. Keep up the hard work!

@garyjadick1774 10 месяцев назад

Garrett you are an awesome person and an excellent instructor. You are the one that got me interested in cnc . This video is so true and what I live by every day. Thanks for all you do.

@IDCWoodcraft 9 месяцев назад

GaryJaDick, you are so welcome my friend.