Coleman BT200X Governor Removal

Подписаться 425 тыс.

Просмотров 250 тыс.

50% 1

Today we remove the governor on the Coleman BT200X and see the results. Don't forget to like, comment and subscribe for more!!!
Parts Used In This Build -
Performance Kit - goo.gl/Ern9W2
Oil Catch Can - goo.gl/nh7VUo
18lbs Valve Springs - goo.gl/E4FThH
Throttle Top Plate - goo.gl/WA4epu
Gas Tank - goo.gl/5SYXb7
Clear Valve Cover - goo.gl/Fnx5Dj
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
RBG Sticker packs $15 (Includes 4 stickers)
Paypal.me/redbeardsgarage include your name, address & what you're sending money for.
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
-------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
-------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RedBeardsGarage #RBGKarts

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 319

@sykwookiee 5 лет назад

Brother, I want to sincerely thank you for the step by step instructions on these engines...I knew everything about them when I was 12...too many concussions to remember details...again, thanks...đã wõõķįęę

@sykwookiee 5 лет назад

...I forgot to say thank you for the blessing, I need all that I can get! ROFLMFAO! đã wõõķįęę

@wildpigremovalinc.executio8028 2 года назад

Im sorry for asking but I don't understand the benefits of changing the valve springs. Could you help and let me know why? Have a nice day.

@---bl6px 2 года назад

@@wildpigremovalinc.executio8028 the stiffer valve springs allow the engine to rev to higher rpm’s by preventing valve float

@Don-sx5xv Год назад

Wow, who would even begin to attempt this task without this video. Exceptionally well presented . It seems like all of my small motor equipment broke down last year, fixed them all, thanks to guys like you. Now I have this Coleman mini bike challenge, relatively new, but I want to do new better.

@gitlittoo2161 5 лет назад

Iv taken the gov and put 18p valves and a straight pipe on last week end. I cant believe the difference. Dif worth the time to do it. And the money. Keep the vids coming guys. I always look forward to watching u guys.

@lucasnolte3258 5 лет назад

That clip at the end of Lonnie going up the hill should be in a Coleman commercial!! Also, just wanted to tell you what a great job you do on your videos man!! Excited for more uploads, God Bless!!

@runningmangray 5 лет назад

The drone shots on the "up hill" run were great, nice work & great editing as allways guys.

@MrClickbang357 5 месяцев назад

I want one of these BT200Xs so bad! First thing I will do is watch this video and REMOVE the GOV'NER!!! Great video! Oh, and I have to comment about the workbench accessory in the background with this: "You'll shoot your eye out!"!!! Thanks for the instructions! Have a great Easter weeekend!!!

@poggo45 5 лет назад

My wife bought me one of these bikes for Christmas, I put a torque converter on in and cut the throttle limiter screw, got 48 mph with the governor intact

@cobyaguilar1889 5 лет назад

Colton M. No other mods?

@jordanhernandez6123 5 лет назад

Really???

@wallywoods288 5 лет назад

What torque converter kit did you use

@spicydeath82 5 лет назад

geez, one of these companies really need to make a built aluminium flywheel that has support for electric start and charging coils. i really don't get why no one has as of yet.

@baggz321 4 года назад

@WHATS YOURSOC where do you get the .265 cam at?

@srcobra50 3 года назад

Only thing with a flywheel that can handle high rpms with charging coils is a tillotson 212 electric start engine. I have no need to buy a new engine yet but once my finally gives (whenever that is 🙄) I will for sure get a 212 electric start

@colbyturbeville2946 3 года назад

Arc has been trying. hard to keep charging system from flying off at 10k rpms

@colbyturbeville2946 3 года назад

@@everettstormy yep

@starsoldier3643 3 года назад

Because its a dirt bike. Made for offroad. They make electric start models of these engines. The also make a kit with all the mods you requested.

@PBreezyify 3 года назад

damn this looks way more complicated than I was hoping for. Thanks though I'll probably still do it because that extra 12mph top speed is SUPER NECESSARY.

@seancervantes1 2 года назад

It's actually pretty easy. Just did it on a predator 212 and took about 2hrs.

@user-ru7he6qj2w 2 года назад

Or you can do the zip tie trick but it isnt as reliable

@buschwacker3254 5 лет назад

In several of your videos you mentioned a homemade crankshaft stop. I'd like to hear more about that sometime... Thanks!

@MrArturoDominguez 4 года назад

Buschwacker me too

@connerdavis2450 3 года назад

I think it’s a back part of a torque converter

@ronaldtipton6200 4 года назад

I have a CT100U and was able to reach a top speed of 36 with simply removing the throttle stop screw and bypassing the governor. It is still slow off the line and has difficulty with hill starts but she will run top end.

@victorsanders3439 4 года назад

I just bought one of these from pevymart last week end, it is amazing. Mine was the coleman ct200u ex

@victorsanders3439 3 года назад

@sbrazy28 what?

@georgekershner6626 3 года назад

I got same one , just bend or but thr screw and be done, this is ridiculously time consuming for a mini bike

@victorsanders3439 3 года назад

@@georgekershner6626 it isn't amazing its a peice of shit

@itsme5279 3 года назад

@@victorsanders3439 why is it a piece of shit? And can you use your stock gas tank?

@victorsanders3439 3 года назад

@@itsme5279 I got the display bike and all the bolts were loose, my clutch burned out in a month. The bike was leaking oil everywhere and my front wheel pop in a week and now my bike is stuck on full throttle and I've lost about 5 bolts to vibration

@tamawiz 2 года назад

Thanks for the videos you guys are awesome!!!! Montana says HELLO Keep up the good work!!

@JavierTorres-du5nq 2 года назад

Thank you brother for the videos. I'm going to need them when I get my Coleman.

@damarpo5467 2 года назад

To much fun huh? takes me back to my youth mini bike days. Great job! stay young and have fun!

@joelboley2344 5 лет назад

Great idea using compression fittings on the throttle cable housing! I'll have to try that......

@rickasisco Год назад

1 inch long, 1/4 inch bolt. Is this just a standard course thread bolt or is it self tapping?

@LIGMAFB 2 года назад

Thanks for the in depth video on this. Just did the valves tonight on mine. Waiting for the Stage 1 & Torque Converter.

@aarondashkevich8425 2 года назад

What’s the point of the stiffer valve springs?

@LIGMAFB 2 года назад

@@aarondashkevich8425 allows the engine to rev higher without floating the valves.

@eldonmolt8057 7 месяцев назад

@@aarondashkevich8425🎉🎉

@vicktorv Год назад

loved this video. I live in Mexico and i get my ct200ua from ebay, is hard to make mods for me cuz i don't have the knowledge to dare to make them, anyways I will study more about this. regards!

@highsnburgers4862 2 года назад

5:23 You needed an short extension on your drive socket and instead went in a bit crooked. Might be stripping threads. Maybe start it in nice and straight with the fingers and then use the air tool with a 3" extension. Good videos!

@cheaprides6678 4 года назад

It it possible to "relax" the governor? Not remove it, but have it cut in at a higher RPM?

@micahshelley263 4 года назад

I’m thinking the zip tie trick with some mods. take two tip ties. cut the one ratchet of one put zip tie through spring under center of fuel tank. place the loose ratchet over full zip tie but do not snug it up all the way, vawalla medium level gov???

@frugalfun4817 4 года назад

@@micahshelley263 Don't know

@andrewdowney760 3 года назад

Zip tie trick However the FW and plastic parts arent designed for higher rpm so why take the chance. Just remove/ upgrade

@vincenzomarinelli8673 Год назад

At 5:25 how did those bolts go in? On my MiniBike those holes aren’t threaded

@kylesyx8432 Год назад

I know,it gets crazy at 4600 I’m listening to my exhaust trying to focus on a good vibe. .Literally !✌️

@raymonddurkin 6 месяцев назад

@Red Beard's Garage are the two governor holes on the block threaded? You mention using 1" long 1/4" bolt with washer, then impact on.

@Jason_AG1 6 месяцев назад

Shouldn't you replace the rods and rocker arms if you're going to upgrade the springs and remove the governor?

@pgp2880 4 года назад

Just a note out that not all flywheels will explode like a bomb when they get to that speed sometimes some of them can withstand past 3600 rpms

@andrew121410 5 лет назад

I’m glad I found this video.

@jeremyv4636 3 года назад

I'm thinking of a LOT of applications for these: low profile, plenty of torque, these could be the one of many answers of a shtf scenario plus emp attack. AWESOME

@letsgogo8473 4 года назад

is there an easier way to remove the governer like the coleman c100x

@BogstersBanters 11 месяцев назад

Instead of running a nut and bolt combination to fill in the 2 holes in the case, I went ahead and tapped them and ran 8 mm bolts to match the case, but a little bit shorter. I don't risk having a nut come loose inside the belly now.

@johnzathang4395 2 года назад

Thanks for showing up how to remove .

@ilovecheesecake516 4 года назад

SOMEONE HELP!! i lost the little metal spring piece that keeps the tube from the gas tank to the engine together! where can I get another one

@Elijahsmith-zd7dt 18 дней назад

So is this pretty much the same process for the 4 stroke 196 cc axis m200 ?

@deatharc8231 Год назад

Thank you, you're the iron man of bikes

@brutallyhonestmf5578 5 лет назад

18lbs valve springs with stock flywheel and rod? 😳

@brocku0 4 года назад

it should be safe if you don’t stay above 5000 rpm for too long but it’d do you some good if you didn’t have to worry about a rod flying into your nutsack when your riding

@Agavegaming 4 года назад

brocku that would not be good 🤣

@fatbuddycat 3 года назад

@@brocku0 I like my nut sack. I use billet rods and flywheels on my governed motors so that I can zip tie them without worry and tune down for friend to ride.....🤔.... now I just need friends 😕.

@landonbutler4097 3 года назад

I talked to go power sports directly about this, I asked about a stage 1 motor with governor removed and 18lb springs and they said do not worry about upgrading the internals that you push 4200-4500 with that setup and the stock internals will hold up fine.

@mattwood2331 11 месяцев назад

I’m having a hard time taking off the 10mm bolt holding the clutch. How do you top it from moving so you can take it off

@rickybryan5242 5 месяцев назад

I just got 1 of these mini bikes and I believe that your vids on it will be very helpful so I hit the like and scribe , and thanks again

@motorbikeTim1 5 месяцев назад

So do you need to replace the throttle plate thing and do an aftermarket tank when you remove the governor? Or will the stock one still work?

@luxuryhomes8889 5 лет назад

yeah sick! i sold the yamaha fz-07 and now i want one of these!!

@olds97lss 5 лет назад

Seems like ditching that clutch/jack shaft and going with a torque converter would work well on these things.

@sandykollmann4970 8 месяцев назад

your Videos are great thanks one ? why is the bike slower MPH wise when you switch to CVT on it

@nikelegend1294 4 месяца назад

i removed the governor and put in a new throttle plate, but now my minibike won’t start, any ideas?

@seminole_fan280 5 месяцев назад

This will be a whole different throttle ideal with a mikuni, right?

@devynthompson3220 5 лет назад

You should do a video that compares stock rockers vs ratio rockers

@rexdadpapa 3 года назад

Dont get me wrong I get the DIY aspect but dang! Why not throw a predator 212 on it and be done? Or will it need the same treatment?

@100whiteboy3 4 года назад

Could y'all please make a video showing and explaining the difference in the springs for both pulleys on a tav2 30 series? I understand they change the engagements but how does it effect the minibike performance off-road/climbing hills?

@jwalkerftw 3 года назад

Please do a governor removal for the Massimo Warrior 200cc please!!

@Trouble_Gav 3 года назад

Did u have to take out the whole engine?

@emmanuelramos4772 Год назад

I did this to my Coleman ct200 u ex do I have to gap them in between the coil in the magnet as well if so what’s the recommendation it calls ? or is this just for the bt200x

@boltmanfantasyfootball452 4 года назад

Have you ever had oil to leak at the base of the kickstand side? Can’t fin the leak, going to make sure the cover plate is torqued to 17 ft lb. hope that’s the issue.

@importbeater24 4 года назад

The hisun 196s are pretty fun right out of the box

@Deucealive75 4 года назад

Damn right they are. So many people waste their money buying 212's. If they only knew that the 196's are just as upgradable as the 212. It doesn't even take a lot to make a 196 stronger than a stock 212.

@kevinpeterson4098 5 лет назад

I swear I learn something new from y'all! Good job!

@rykerinthewild1155 Год назад

I couldn't find my master link in the chain on my Massimo.. any idea how to get it off?

@licence1001011 3 года назад

only gunna ask one more time. I'm going to do a coleman build. would live it if I could chat with you for a few minutes. thanks you

@licence1001011 3 года назад

looks like I have some work to do...I just bought same bike

@robertsanders4088 2 года назад

well ,thank you very much govener.good looking out,but that's a lot of mechanics involved,

@JNC1973 3 года назад

Man I was hoping the how to vid would be a lot simpler than it looks. I don't know didly squat about engines except how to do an oil change lol. Forget about removing the governor I'd never get the engine back together if I have to disassemble it just to remove the governor. I thought it was just a screw near the throttle that had to be removed. Are there any easy very simple ways to increase the speed and power of these minibike engines without having to take everything apart ? For us people who didn't take small engine repair in High School ?

@seanbraid 3 года назад

Ditto!!

@2takt_junkie 3 месяца назад

Where can i buy a mini bike in germany? Its almost impossible to find one here

@jerridtremblay9609 Год назад

Great video very informative. I just got it an I'm 200 pounds. It was already assembled when I got it. Seems like it has a hard time on hills if I'm starting off without speed is that normal?

@mythical7109 3 года назад

Is there a billet flywheel that will fit this engine? I’ve got the stage 1 upgrade already

@190dopey 4 года назад

I bent the starter cup disassembling, and tried to get it back into shape. It's not perfect, but would that keep me from being able to pull the cord?

@daviddavis5312 5 лет назад

Every man and boy that wears pants should always have a pocket knife by age 12

@BuzzLOLOL 5 лет назад

Pocket knife by 6... survival knife by 12... and safety training... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yFJXCYq8CC0.html

@luciencoates 4 года назад

David Davis ok boomer

@luciencoates 4 года назад

BuzzLOLOL ok boomer

@kiheirc3195 4 года назад

I remember being a kid in elementary school and me and my buddies would be comparing our pocket knives I have course had a Boy Scout pocket knife those were the days doing dangerous stuff and not getting in trouble for it remember lawn darts LOL.

@jakerogers6562 4 года назад

@@kiheirc3195 im only 32 but we carried guns and knives to school everyday and no one thought anything of it. Times have really changed in the last 20 years. Ive carried a handgun and a knife every day since i was in high school. It amazes me at the "men" who ask to borrow my pocket knife because they don't carry one.

@mrshhh7841 4 года назад

Redbeard; Take the MCAT [assuming]You have your BA or BS . You have the makings of a surgeon. Yes Dr Redbeard MD. Im not being funny either. You sir have the right stuff.

@rodneyws1977 5 лет назад

Can anyone comment on how the BT200X rides compared to the other 200 Colemans with a front suspension? I have a CT200U and where I ride I feel like I'm holding on to a jackhammer. The rear seat cushion does Ok with the rear, but those handlebars are jumping all over the place where I ride. Thanks!

@codybarz8193 Год назад

I have both a ct200u and a bt200x. bt200x is much better at off roading ct200u I’d say better for crusing around

@BrandoMoto 4 года назад

How were you able to get the flywheel off so easily? Mine is stuck on there and I don't want to mess anything up wacking and prying on it

@skidokare88 4 года назад

Removed the govenor and it was tricky to start that same day, but today, a day later I've been pulling for about 20 minutes and it won't start. Any ideas?

@cohenlittlemusic 4 года назад

Was the engine choked?

@kaedenpollock8426 4 года назад

What size was the bolt and washer for the clutch?

@jacobsebastien3910 4 года назад

I have a Colman BT200x an I just ordered a Tillotson 212 an a Torque Converter I'm wondering if the torque converter sprocket will line up with the rear sprocket because I heard the tillotson Engine has a little shorter shaft' Please give me sum info" Thanks"

@patpollifrone391 3 года назад

Yo how do you guys get these things to stop? Lol just did intake, exhaust, carb jet and torque converter and now it doesn’t wanna stop

@RedBeardsGarage 3 года назад

Adjust the bolt on the back of the brake

@patpollifrone391 3 года назад

@@RedBeardsGarage thanks for the response man. Great content. Learning a lot

@jaybourbon6169 7 месяцев назад

cant you just do the zip tie trick on these engines like the predator 212?

@josiahtimas1944 Год назад

Would it be different if you used the zip tie method instead?

@Griffin_Farms Год назад

Is there a way to leave the original gas tank?

@fouryearproductions 3 года назад

Does doing a stage 1 with the 18lbs springs make a difference with a governor installed?

@gobot.v431 4 года назад

I’m currently doing the same thing to my bike I was wondering if you used a nut on the bolt to plug the Governor holes or did you tap it

@sublimefan661 5 лет назад

Would you happen to have any more discount codes for gopowersports? None of them work anymore.

@troyriderzsquad2158 Год назад

Where dod you but that spining table?

@ryanharker7334 3 года назад

Im going to do the top plate conversion but want to reuse my stock tank in the same location can you help me please with part numbers or what you would use and where to find them

@Snooknookdakewchiecrook 4 года назад

Your engine looks wet. Did you spray it off before working on it? If so, how did you spray it without possibly causing damage to the engine? Also will the Jackshaft from the coleman fit a predator 212?

@Deucealive75 3 года назад

The stock jackshaft bolts right onto the 212. You just need 1 inch long 5/16" x24 national fine bolts for the Predator. The stock bolts are metric.

@larryguevara3350 5 лет назад

I have the same bike in stock form and vibrates really bad on take off then smooths out at high rpm.ready to send it back.any thoughts on this.

@Mr.Safety. Год назад

35mph?? God damnit thats movin

@LNRRidez 5 лет назад

Where did the MSD coil come from?

@LymanTaiste 10 месяцев назад

You don't plug the holes?

@yourfactstory Год назад

Thanks dude !

@williamleonard9929 Год назад

I’m sorry if I missed it but what app on your phone are you using on your phone for speed? Ps. GOD BLESS!!!!!!

@DTA-me3kv 2 года назад

What is the rev screw do? If u just back it off? Have a 2015 Baja

@drj2798 4 года назад

If I remove the governor on a stock Predator 212 do I have to install 18lb valve springs? Will it hurt to leave them stock?

@ant-lr5iv 2 года назад

Are the torque specs the same on a tillotsun

@micahshelley263 4 года назад

the full plate you have listed at the moment seems to be out of stock. do you know if the half plate will fit on the 196cc colman?

@AreEff1987 2 года назад

Wait..so how do we prevent from dying off an exploding flywheel ?

@bradenwest6677 2 года назад

How do you turn the headlights on?

@babyboy3972 Год назад

Buy a predator 212cc motor pull the revlimiter out of the motor add a torque unit and a performance muffler and watch the difference in your speed

@overdrivegokarts6849 5 лет назад

nice man loved it keep up the good work

@SuperChris966 2 года назад

Hey guys love the videos I'm gonna be doing all the modifications I see here to my bt200 Coleman not sure witch flywheel to get wasn't in description could you comment the link

@danielespinoza7880 3 года назад

I just removed my governor but when I start it up, it automatically accelerates to full revs, it literally sounds like it’s gonna blow up, now I’m just wondering why I did all these speed upgrades… :(

@RedBeardsGarage 3 года назад

What did you do with the throttle? You have to buy a bracket to replace the governor set up.

@danielespinoza7880 3 года назад

To be conpletely honest, I’m just a 12 year old who wanted a faster mini bike but just never does anything right, to be honest about this aswell, I didn’t even know you had to buy a bracket to replace the governor set up.

@RockieRoadz 4 года назад

What might the numbers be with a Lightened Flywheel and Torque Converter?

@millerkold Месяц назад

What coil is that?

@100whiteboy3 4 года назад

Just an idea lol love watching the videos though, I've learned alot!

@lethalchild8200 5 лет назад

Also did ur engine give out

@marquesstate4377 4 года назад

need help the engine light came on my Coleman just start working is not turning over I'm not getting mad and got gas in it. Oil in it and I don't know what to do with it