COME TO THE FIELD WITH ME | WHAT TO EXPECT | STAINLESS PIPE PURGING TIPS | WELDING 8" 6010 ROLL OUT 

bro I don't even weld or are gonna weld but your shit is so enjoyable to watch can just sit here and watch all day, love from london bro!

We need more videos from the field you can see how it actually works and learn so much

I start welding school on the 14th !

Great video as always. Watching from Florida!

Great video. Can only do what time allows!!!. DEEP EAST OAKLAND

Great videos. Subscribed last month. I did a career change(at 54..) and just got my first welder/fitter helper job. Not a welder yet but your videos are very informative. Thank you.

Just came here to say that I work for lone star and built those blowers you piped up!

Coming from a NDT tech that’s pretty good bro. Keep it bro.

You should do a video on different types of grinding disk and what their used for and such.

The machine you have is set just fine, next time try to adjust your temp to 52,53 on your remote that setting will be your sweet spot for stainless sch.10. Try it!!

Nice video bro 💯 Do you usually grind out your tacks when it come to 3oclock & 9 ? & what about on your stick welding do you weld it until u get to your tack or just tie it in?...

**PLEASE HELP** Can anyone give me any tips about how the steamfitters union aptitude test is? (Preferably from personal experience) mostly, what kind of math questions will be asked? THANKS IN ADVANCE! (Phila., PA)

Awesome content dude really giving the viewers in depth look into the field awesome dude! 👍🏽👊🏽

👍 nice

Hey bro do they need any single hands there in Wisconsin?im in Minnesota bro thanks...

I’m watching this video nodding my head saying oh yeah but not understanding a damn thing 😂😂💯 good stuff tho man!

You can wet your finger and feel argon flow but your lips are very sensitive, you can really feel the tiniest purge flow with your lips. Also you can feel argon flow out of a gas lens or just the gas flow out of the cup. I always set my flow meter by feel rather by cubic feet per hour to give me a smooth non turbulent purge. Too much argon can be worse than not enough. Also remember argon is heavier than air, always if at all possible introduce the argon below the level of the weld joint and have your vent point at a higher level. Think of it like you are filling the pipe with water, as the pipe fills it displaces the air inside which flows out of the vent opening on top. I worked in aerospace primarily, so some of what I advise may be overkill but the stuff we welded is in the space station right now.

Be careful for them saw blades. The paint can come off and be on the bevel causing weld porosity.

Where did you get the Chalino sticker on your hood? Looks good!

Dale duro compa 😎🤘💯 Saludos Des De Houston, Texas #Covid_Season_2021

Dude, what do your proceuders say about weld prep? Every procedure I've ever welded to, and every travel sheet I've been given for a job, has always said: "all peices to be welded shall be free from oil, grease, diry, rust, paint, milscale and all joints to be welded must be ground to sound metal prior to welding

Keep up the good work my dream isn’t even to work in welding I just like watching the videos

Love the vids! Got any free hand cap techniques

How do you purge a pipe with a lot of 90s ts and really long? Besides using bags? I always purge from the lowest part of the pipe but sometimes when im welding at the very top of the line it wont purge right.

im glad you aint no teacher , you do t follow the correct wps procedures. the tacks ar not up to code.

I got a question I have a lincoln ranger 9 250 what tig setup should I get

What’s up man cool video info. Where is a good place to look for chemical plant work as a rig welder?

How long is your purge hose?? What would you recommend?

After seeing you wear that mask you probably run your rig for 20 a hour lol

Do a full rig tour ? Your setup and everything !?

Nice video. Very well done. Awesome root pass.

Watching your videos are pretty awesome...keep it up ..sky tha limit...be safe

Bro thanks so much for this. My purge is money

You know you can use a use tiger disc and it would make both bevels

Thanks for the schooling bro......be safe

@10:53 dude needs some fresh denim lol bout to go up in flames around that 6010. Another great video man nice work!

I need to talk to him, does he have a Instagram or something

Hey buddy can show me how to walk the cup when u root on sch 10

So what did you do all day till 2 o clock when you finally could weld?

Is it only Europeans who use pulse?

The grind never stops my man! Keep up the awesome content, your videos motivate me every time I watch one. Getting ready to sell my Mustang to get a truck for when I get into rig welding. 👍🏻

Quarter cross technique is great.

That stainless thoooooo

New sub here, great video!!

Wow your like me multiple welder.

Do you purge before you tack?

Fucking Beast 😤😤😤💰💰

What machine do you run?

How do you do a root pass on the pipe

With 💯 percent argon

How much you making?

Love the videos man! What advice would you give to someone trying to get into this kind of career? I’ve always been interested in welding.

Love ur videos watching from Austin Texas

I use spool mate Miller

Yay weldinggggggg!

Nice root 👍🏻

No tape?

nice work

Well done, sweet bead.I love welding bra, I'd do that shit for free!

As a high school welder, your videos always help me out. Thank you!

👏👏👏💯!!!

Hey dude

Sick bro, the root on the stainless steel came out nice and flat all the way through. I have issues on the corners, usually blows a big hole and starts looking sloppy with all the rod i quickly fill in with. Any advice to keep it smooth all the way around? Thanks man! I’m working on getting my stick certification pretty soon. 👌🏼👍🏼

preciate the knowledge and tips!

Looks laid back af dog one day imma rig out like you lol

👨‍🏭😎🎥👍🏻💰 !

I like your videos, bro, thank you for sharing with us! I have a question. So not long ago I've grinded a bevel like you did in this video (the stainless pipe ). I ended up with a grinding powder inside the pipe, contamination and failed Xray. So , how do you extract that dust out of the pipe, and do you even get any issues with it. I extract the powder with some magnets from time to time, but not working on stainless. I only had low pressure purge, do you think that may caused the problem?

first video I have seen of your,s, really enjoyed, thanks, PB in Florida

Nice work bro. I'm still learning , your videos help me out alot. Anymore tips on refinery jobs? Looking to get into that

Any recomendation on first welding job , just got out of welding school?

Great job man, love your videos, just starting to weld on my own as a side hobby for now, have always been fascinated about welding and metalwork. Where i live there isnt market for rig welding atleast not at the moment. But yea. Great job.

Good work brother! Stay in the money! 🤙🏾 Sick ass bead 💪🏾

Ive learned a lot from your channel man thanks👍🏻👍🏻

Meet me in wisconsin, and lets tig out that energy plant, Trust me you will not get used to this weather. It will get FRIGID

You can also use a sheet metal deburring tool, to also get in the root, to get your grinding shavings out from the backside of the root. I used to use it, to make sure my roots were as I chose to not fail! AS I always say keep'em guessin!!

This isnt from the video but have you ever done a 7018 pipe all the way? If so do you have any tips

The only alway you fix the pipe not being level is If you roll it. The only thing that can go wrong there is you gonna draw the pipe in or out at the 90. Or you can also draw the flange to the left or right side.

Man that’s awesome! I’d love to become a rig welding combo hand like that!

Fantastic job buddy 👍! Great tutorial. I learned quite a bit on this one. Thanks!

Love your videos man keep them coming i want to be a welder looking into going to a school but idk if i should don’t want to go in and not really get taught what i need to learn but love your videos did you go to a welding school or you started as a helper ?? God bless

Great video what brand are your bibs that your Wearing

Nice seeing a lot of younger guys doing trades work. I'm 23 and just rigged out in Oct doing gas distribution work. My advise to you is to get into gas distribution cause usually when a company finds a good hand they'll keep you working in the long run.

Nice video.. keep them up👍🏽👍🏽

You are super welder .I hace a dude is PD o PI the root pass 6010?

You need a Good welding school just to get your foot in

are you using a fixed lens or auto to see through the gap?

you a badass welder g

Nice stainless work. I do my 6 in sched 10 at 100 to 1 08 amps with a tight gap and Walk the cup 99 percent of The time. Nice Seeing different techniques applied. Props on the glove or rag on the purge line. I agree, it's all you need. 🔥💪

I see ya my boy! Keep up the good work G, God bless !

What’s up bro it’s been a while but it’s good to see that everything is going good for you Cant wait till I get my welder and get my own thing going just waiting on that bonus check till then I’ll keep watching your videos and keep learning. Nice work bro🤙🏼

Ay man no lie your videos get me super excited for working, im 18 doing combo starting tig pipe then tig stainless pipe soon , your videos give alot more good info for pipe welders and its so much more personal.

Good work safety peep dont say nothing bout the red bandana no welding caps required

I'm a painter, have been doing it since my senior year of high school but after seeing your channel.. It has motivated me to learn welding and attend a school to learn.

He’s back!! 😎

Hey what’s your setting to put a root pass with sick, if you didn’t have a remote?

How’s your machine acting up in the cold 🥶 bro?

You make wanna leave ironworking and be a rig welder but rig welding jobs in cali are hard to find.

Great videos bro ! Helps a lot More 6010 welds

I like that you keep it real and simple if need be, saves everybody money and time.

Clean root good video man, you ever do any aluminum?