Comma Two and OpenPilot Basic Troubleshooting 

Damn my problem is they haven't shipped mine yet been almost a month 😢

🤔 Don't know if this product is ready for people that cannot troubleshoot by them self... 🤷‍♂️ Troubleshooting the unrecognized car situation 👍

I had over 3K miles on my comma 2, I loved it. I removed it before i took my 2018 Sienna into the dealer for service. Reinstalled comma 2 after service, now all it does is boot loop. I tried factory reset and it hangs. I tried the PC-Android driver recommended in Discord to reflash, driver won't load. I contacted the factory, to see if they could factory reset, Zero response other than we do not fix community sourced software and the Hardware warranty is only 30 days. Any Ideas? Or do I own a Brick? Update: I put the comma 2 back in the car, It was boot lopping for half Hour Stopped for lunch restarted and Thank Heavens It back working. IDK How but I'm so happy its back.

Great video. You must do the unrecognised car solution. In the wiki step 4 is not user friendly and I'm sure you will do better explanation in video. I can offer my help. I see that this error is often raised in the discord. Again man thanks for the great contents

I'm having an issue with "can error" "check connection". On a 2023 Chevy bolt ev 2lt. Ive purchased two harness cables & still same issue so now I believe it's the black panda. I'm also getting an error on lower left corner of screen it's not saying "panda active" that I've seen in this RU-vid video. I got the panda from Mr. One store from China. I'm wondering if I need to reflash the Panda. I've been in contact with the store but you know there's a language barrier. Not really trying to pay $500 for a red panda, trying to save for a comma 3. Help!

Have you made a video about unrecognized car? My car is fully supported and should be plug and play. It isn't. 2022 Maverick Lariat Lux.

I my new comma3 got into loop after installing openpilot “ registering device : serial: xxxx IEMI: cxxx,)” Any idea what can I do

Have issue wit No panda, any one havet a clue what it could be?

2:25 Got my comma today Logan but want to figure a better way to hide the cables. Can you provide any more insight?

What year? Make and model is your car? Seems like it has very good steering torque. My 2017 Prius I kept getting message openpilot alert “steering exceed…..” at sharp curb.

My issue is it stating “no panda”. Checked connection which was fine. Rebooted, reinstalled etc all with fail

Did you do a video about car unrecognised

Hallo Logan, watched your openpilot videos. You mentioned something in one of your clips about non supported cars. Id like to ask you,how do I implement a non Supported Car On comma2. Thinking about buying a 2020-2021 toyota yaris hybrid with TSS 2.0 eu model it's not the same car as the us yaris-mazda. thanks in advance

How about when my toyota highlander shuts off openpilot when the speed drops below 25mph? And I have to drive it over 25mph before it can reengage? I wish I knew it couldn't do stop and go from zero. I bought this for Los Angels rush hour traffic!

What if my USB-C charger is capable of 100W? Wouldn't that be enough to forego the USB-A adapter? Also, isn't USB-A usually limited to 5V@2.4A?

Dash cam mode help please

I got mine all set up but for some reason when I engage openpilot, nothing happens. I have to drive my vehicle normally

Hi Logan could I have your discord name? Wanted to ask if you could help me with an unrecognized corolla hybrid.

Thanks for your video, do know of a way to clear the memory on the openpilot system without doing the upload via wifi each time. My upload speed is slow and takes away my ability to use my internet for other things.

Much to the dismay of some of the open pilot community. I found a USB-C to USB-A connector that works

I have a Nissan leaf, but my Comma Two now says car unrecognized and goes to dash cam mode after having worked for a few months. I read something about modifying the fingerprint, I do not know how to do that. So now I'm left with a dash cam only and no driving. Customer support has not been helpful. Any tips?

Dear Logan, thank you for the video. We just installed the Comma 2 on 2018 Toyota Camry LE model. We get to the screen shown at 6:14 in your video, but no further. No front camera video is shown and screen just times out after certain amount of time. Any thoughts?

Got my Comma2 about 2 weeks ago and love it. The only issue is that the screen is so dark I can't see it, even on a bright but cloudy day without my sunglasses on (polarized lens sunglasses wont's work at all). Any way to turn up the brightness of the screen? Thanks for the videos!

Was driving and 30 minutes in I got calibration error which forced a vehicle restart to clear the problem. I checked the usb plug and reconnected it. Got the alert 5 minutes later and had to restart it again. Seems to work but I haven't drove it more than 30 minutes at a time. Any ideas on the calibration error?

I can't find a video anywhere of how to add fingerprints, anyone know where I can? My problem is that it won't recognize my 2018 honda civic.

Does the comma two work with the comma pedal? I am thinking about picking up one for the 2017 Corolla. I currently own a comma two.

Hey there! I have a 2021 Corolla and it is displaying "dashcam mode car unrecognized' message. I could probably figure out the programming needed, but its not an area of strength of mine, especially without video assist so I am considering returning it... any chance you could do a video on how to walk through this?

Nice one Logan!

What will happen if you accidentally disconnect the Comma power when openpilot is engaged?

I'd love to have comma two openpilot maybe even invest some money in the project. I believe in you Although to actually buy the device i need you to add emergency braking and pedestrian monitoring. Man if im drving in a school zone or main road and some damAs* kid jumps infant my car. Dude you have to give me at least %20 to %50 more chance of to not squishe the kid, dog , car, bike ....

when it asks to connect to commaconnect can i just skip and then i see it asked agin at the end can you just skip again. I do not have comma conect and dont want it