Compact Subwoofer! Tang Band W6 Subwoofer Box Build

Подписаться 97 тыс.

Просмотров 91 тыс.

50% 1

If you enjoyed this video you may also like this one: • Ported Subwoofer Box B...
In this video I build a compact subwoofer based on a Tang Band W6. Who does not love a subwoofer box build?
Affiliate links to products used in this video:
Parts Express**:
Subwoofer: parts-express....
Terminal Cup: parts-express....
Textured Paint: parts-express....
Veneer: parts-express....
Amazon*:
Push Blocks: amzn.to/30K4U9D
Flush Trim Bit: amzn.to/3eUPfcU
Round Over Bit: amzn.to/2ZV3FoT
Speed Square: amzn.to/2OSYK1A
Wood Glue: amzn.to/3eR3Cik
Clamp: amzn.to/2ZXcL4x
Brad Nailer: amzn.to/2D4Zuhg
Brad Nails: amzn.to/32S5oNB
Gasket Tape: amzn.to/2EhKvRZ
Polycrylic: amzn.to/3gazTm5
Exclusive Discount Codes for DIY Audio Guy fans:
10% off at NVX.com (nvx.com/?ref=n...) with the code DIYAUDIO10
10% off of Custom Speaker Pods (customspeakerp...) with the code DIYAG
Support DIY audio content by shopping with these affiliates:
Amazon: www.amazon.com...
Shop for Car Audio at NVX: nvx.com/?ref=n...
Shop for Basshead Gear at Down4Sound: lddy.no/1065t
Shop for Car and Home Audio at Crutchfield: howl.me/cg9bCO...
Shop for Car Audio at Sonic Electronix: bit.ly/3bazPBs
Shop for speakers at Parts Express: parts-express.s...
DIY Audio Merch: my-store-b3f13...
*As an amazon associate I may earn a small commission on qualified purchases.
** As a parts express affiliate I may earn a small commission on qualified purchases.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@kuronekosan2830 Год назад

Can you please do a 4 inch subwoofer build which goes down at least 60-40hz?

@Chuck_Sanders 2 года назад

We did 2 of these, in a T-Line enclosure, in an extended cab truck, for giggles. Man , they were impressive!

@DIYAudioGuy 2 года назад

That sounds cool!

@Toid 4 года назад

I've been waiting for this

@DIYAudioGuy 4 года назад

It has been sitting on a workbench, 90% complete, for about 2 weeks! I had time yesterday to wrap it up and edit the video.

@rickwalicki7057 11 месяцев назад

I liked the subwoofer build but saw you were using binding posts. Are you powering them from a stereo amp, and do you need a low pass filter? Are they intended to be a passive sub? Thank you

@thisismeisthatyou7940 3 года назад

Awesome build. Wanted to build one of these for the tang band for a while.

@DIYAudioGuy 3 года назад

It was a lot of fun!

@matthewlowry1268 Год назад

I picked up your set of plans for this build. Highly detailed and easy to follow. This little thing rocks!

@DIYAudioGuy Год назад

I'm glad that it turned out well!

@3RDERA 4 года назад

Great upload sir!! Looks great and you made it look easy.. can a 🌽... 😁 Random thought, but that driver always reminds me of the first time I heard a W7. Good times👍🏽

@DIYAudioGuy 4 года назад

Thanks man! I really like the textured coating, makes for a great finish and hard to mess up.

@pablolopez-sr5cb Год назад

thanks you for the video I enjoy watching the video

@DIYAudioGuy Год назад

Glad you enjoyed it.

@MRSMgaming96 Год назад

You not mentioned 😢the size of

@goobisoft4873 4 года назад

Awesome woofer i love it

@DIYAudioGuy 4 года назад

Thanks

@edud8452 4 года назад

Very nice woek Sir👍Is that textured coating available in any more colors?

@DIYAudioGuy 4 года назад

Just black and white, I think you can tint the white.

@edud8452 4 года назад

@@DIYAudioGuy i can mix them together for grey🤣👍

@Brian1. 4 года назад

Nice build Justin. Thanks for sharing.

@DIYAudioGuy 4 года назад

Thanks for watching!

@schuylercassidy1785 3 года назад

My🦾friend👹here⛓Justin💦he’s✅already🔥taken🤯and🥶he’s🧱cracked🧐at🌈fortnite🔈my😎guy🤖uhhhhhhhhh😩

@TheFreesabin 3 года назад

Duratex it's what u used??

@DIYAudioGuy 3 года назад

Yes, it is my favorite way to finish a speaker. bit.ly/3iYbnXp Parts express carries it, plus another brand that appears to be the same thing.

@janvanrompaey8663 7 месяцев назад

Where can i get the plans please?

@DIYAudioGuy 7 месяцев назад

my-store-b3f136.creator-spring.com/listing/tang-band-w6-subwoofer-plans

@jbradshaw7 9 месяцев назад

No crossover so you are assuming an external crossover to avoid unwanted high frequencies? Where are the plans for the box?

@DIYAudioGuy 9 месяцев назад

Yep, no crossover. I've been running it in a 2.1 system off of a date and audio amplifier that has a crossover. You can find a plans right below the video. If it doesn't pop up as the first couple of choices you might have to click on one of the other plans and that'll take you to where I sell the plans.

@SilentShadow-ss5xp Год назад

I'm not convinced that amount of bracing is necessary for a sub of this wattage. By no means is it hurting anything but it seems overkill.

@DIYAudioGuy Год назад

You are probably right. I have been experimenting with bracing over the years, trying to figure out what helps and what does not.

@TheUltimate65 11 месяцев назад

How big in litere its this box...

@keijojaanimets819 Год назад

Tere prill,vägev kast!😁

@itsJoshW Год назад

This is an older video, however I've been on the fence on what subwoofers to grab. Context: Home theater, but small. 10x15 room, living room, not like it's a dedicated theater room. I built a 1 cubic foot (internal volume with bracing included) box. I'm at the driver stage and I'm doing PVC ports. I don't know which driver to go with. I was looking at the Dayton Audio RSS210HO-4 8", however the problem here is simply "Is this the right driver for the size". I'm looking for 2 smaller box's, which is why I opted no larger than an outward dimension of just under a 14" cube. 2 of them. One in each corner to compliment each respective bookshelf. Would you say this driver, the Tang band, may be a better option for a smaller enclosure? It's important to note that the primary LR speakers do hit a solid low frequency, but not below 45hz. I am looking for that cinema 30hz or so rumble. Suggestions? If so, consider a video idea with this! Because there's probably a lot of people in the same boat. Not many people "want" massive subwoofer boxes but want a quality DIY subwoofer.

@DIYAudioGuy Год назад

That reference series sub you mention is well know for its ability to perform well in a small sealed enclosure, but it is a lot more expensive than the tang band. With your small space consider this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fr7aCSPtNq0.html

@TheFreesabin 3 года назад

BTW nice build!!

@DIYAudioGuy 3 года назад

I'm glad you like it!

@rhyzianstyles8601 Год назад

Hello.. There.. Can u share the measurements in this subwoofer box?

@DIYAudioGuy Год назад

my-store-b3f136.creator-spring.com/listing/tang-band-w6-subwoofer-plans

@sermac3246 7 месяцев назад

👌

@sanduntharanga2679 3 года назад

Bro.can you give dimensions for the box.

@DIYAudioGuy 3 года назад

If you'd like the plans you can join my patreon.

@mundodosfilmesecinefilos3149 Год назад

medicao dessa caixa qual é?

@joelmtz9815 3 года назад

Where can i get the schematics of the box, to try to build it?

@DIYAudioGuy 3 года назад

These plans are available to my patrons on patreon.

@guillermopineda6733 3 года назад

Can you provide the real size of the enclosure

@DIYAudioGuy 3 года назад

Absolutely, full plans are available for my patrons over on patreon. Check the link in the video description.

@brandonweir8285 Год назад

Can the measurements be used with 3/4 mdf?

@DIYAudioGuy Год назад

You just need to account for the extra thickness, .25" in each direction.

@weslybrayo8959 2 года назад

Can I be able to get the measurements for the box

@DIYAudioGuy 2 года назад

my-store-b3f136.creator-spring.com/listing/tang-band-w6-subwoofer-plans

@INeedsMoneys Год назад

This is a bass

@markkamau6888 2 года назад

could you please share the dimensions

@DIYAudioGuy 2 года назад

my-store-b3f136.creator-spring.com/listing/tang-band-w6-subwoofer-plans

@markschmidt8176 2 года назад

Great Job. I build two of these subs for my Ikea TV Lowboard. Works pretty well

@DIYAudioGuy 2 года назад

If you need a compact subwoofer there is nothing that can hang with these little Tang Bands.

@markschmidt8176 2 года назад

Have you ever build a closed Box with a DSP Biquad EQ for the Tang Bands and compared this to a ported Box?

@shindelightrangoli9062 3 года назад

Great weekend sizes please sir

@DIYAudioGuy 3 года назад

You can follow me on patreon for the plans.

@kpadalldotablet1009 2 года назад

Is that just a full range driver?

@DIYAudioGuy 2 года назад

Nope it's a small subwoofer.

@kpadalldotablet1009 2 года назад

@@DIYAudioGuy What is the difference? Does it have a filter built in?

@dmahmedhunterali840 2 года назад

Is it homeshake sub?

@DIYAudioGuy 2 года назад

Never heard of homeshake.

@lio1234234 4 года назад

Loved it! Have you measured a frequency response for it? Or have one that you calculated? If so I think I might build one, it looks great!

@DIYAudioGuy 4 года назад

I have not measured it, but according to WINisd it peaks at 43 HZ has an f3 of 33 HZ. I did play a few test tones and to my ear it seems to be tuned just a bit higher. Could be due to the polyfill. I can always take that out.

@DIYAudioGuy 4 года назад

If you want to give it a try the plans are available.

@dageshwarsahu4661 Год назад

Dissemination

@pakistanigamer3050 11 месяцев назад

Kya Matlab putar?

@VishalKumar-ug7rx 3 года назад

Please answer me

@DIYAudioGuy 3 года назад

bit.ly/3qNoz5c

@VishalKumar-ug7rx 3 года назад

What is size sir

@DIYAudioGuy 3 года назад

You can find that here: bit.ly/3qNoz5c

@klewandowski5666 3 года назад

frequency response?

@DIYAudioGuy 3 года назад

f3 is around 30 hz, fb is around 35 hz

@klewandowski5666 3 года назад

@@DIYAudioGuy looks good man. got build plans?

@DIYAudioGuy 3 года назад

Absolutely. Just head over www.patreon.com/DIYAudioGuy and sign up for the Bass Reflex level! After you have done that let me know if you need help finding them -- Patreon is not very user friendly.

@krowwithakay 2 года назад

This sub was just meant to be used in a T-Line in my opinion.

@DIYAudioGuy 2 года назад

It would work well in a t line.

@UnitQ7 Год назад

что ты строишь? ящики для динамиков? где хоть один график, как играют эти детские поделки? это самое полезное видео в моей жизни 😆

@MunKeeButt67 Год назад

Amazing build, how do you finish around the veneer? I think masking it and a coat of black right up to the edge to cover any veneer edge would work. Once again envious of these boxes 🙃

@DIYAudioGuy Год назад

I think I finished the veneer last, It has been a while so I don't remember the details. I used this: parts-express.sjv.io/QOo1EA