Convert STARTINK to 12v in 2024 - Portable, Tough, Cheap DIY - GRAB A QUICK MOD WITH THE DAD BOD

Подписаться 3 тыс.

Просмотров 9 тыс.

50% 1

Here I show you how to easily convert your Starlink to 12v without cutting any cables in an all in one portable, weatherproof rugged case that you can take anywhere! (And on the cheap!) 🤙🏽
-------------------------------------------------
THE GEAR YOU NEED:
Yaosheng Dishy to RJ45: amzn.to/3PQNCST
Yaosheng PoE Injector: amzn.to/3vE6ptJ
12V to 5V 3A USB Type-C : amzn.to/3TKe5Tf
12v-48v 8A DCDC converter: amzn.to/3PQJ7HQ
GL.iNet GL-SFT1200 (Opal) Travel WiFi Router: amzn.to/3J75ghd
GL-SFT1200 Router Mount (Opal): amzn.to/3VNHwGH
6-WAY Fuse Block with LED indicators: amzn.to/3vHSm6e
Panel Mount 50amp Anderson Plug: amzn.to/4ajqS62
Panel Mount Isolator Switch: amzn.to/4cNccxF
BCF Hard Case: www.bcf.com.au... or
Bunnings Hard Case: www.bunnings.c...
-------------------------------------------------
Thanks LEGENDS for checking us out! 🤙🏽
Hitting the LIKE 👍 & SUBSCRIBE button not only helps us out (for free) and tells us that we’re doing an ok job, but it also gets us (and you) closer to our next *giveaway! 🙌🏽
*Now leading up to leaving, we had been doing a giveaway every 100 subscribers but since being on the road, it's been a bit difficult but we've lined up another epic one!
Check our Insta for GIVEAWAY details once we hit the 2K though we do also post it in our community tab here on RU-vid! 🤙🏽
-------------------------------------------------
Check out Beach2Bush for all your 4x4 Off-Grid Touring Solutions.
beach2bushaust...
And use the discount code: GRABLIFE to save 10% at checkout! 🤙🏽
@beach2bushaustralia
-------------------------------------------------
Check out the ProTrek Website for different caravanning accessories and add-ons: protrek.com.au...
Use the Discount Code: GRABLIFE to save 15% off everything! 🙌🏽
@protrek6109
-------------------------------------------------
For the best screw in pegs on the market, check out
www.outbacktra...
And if you use the DISCOUNT CODE: GRABLIFE
you'll save some dosh at the checkout! 🤙🏽
@OutbackTracksScrewInPegs
-------------------------------------------------
Get your Survival First Aid Kits here:
survivalfirstai...
Use Discount Code: GRABLIFE
to also save yourself some more dosh at the checkout! 🙌🏽
@survivalfirstaidkit
-------------------------------------------------
For all your Starlink, Fourby and Caravanning accessories check out these Aussie Legends - Outcamp
www.outcamp.com.au/GRABLIFE
And use the discount code: GRABLIFE to make the deal even sweeter!
-------------------------------------------------
If you're after Australia's favourite sand and dirt free mats, check out cgear.com.au/
and of course if you use the discount code: GRABLIFE
And you'll save 10% at the checkout! 🤙🏽
-------------------------------------------------
If you’re after some amazing dinnerware for your van that’s 100% plant based & compostable 🌱 Microwave, Dishwasher & Freezer Safe, check out daisygraze.com/
And using the discount code, GRABLIFE15 saves you stacks at the till!
-------------------------------------------------
For some sweet deals on some sweet threads worn by the Gourlays, or anything at all, check out Anaconda: bit.ly/3th96zD
-------------------------------------------------
For the best quick dry towels out there, check out Will&Wind
bit.ly/488YEKH 🙌🏽
-------------------------------------------------
Now if you want to grab yourself a cheap but quality wireless mic to level up your vids, check out the Hohem Mic-01
bit.ly/4bEKMcZ
-------------------------------------------------
For any Tupperware needs, hit up Baby Cakes, AKA Deb and she'll sort you out!
bit.ly/2WSFAQO
-------------------------------------------------
For all your Music and Sound Effects needs, check out Audiio
ref.audiio.com...
-------------------------------------------------
#vanlife #rvlife #australia

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@jonleone777 4 месяца назад

A better illustration of the wireing hookup would be great for novices.

@m8trxproductions417 6 дней назад

Hello, thanks for the video, I have built this system, I’ve been experiencing mixed results when the Starlink router is not connected. The main issue is that I have internet access at the non Starlink router, but the Starlink app indicates it’s not connected, preventing me from performing a speed test. Do you recommend turning the "Bypass" setting on in the app for the Starlink router? I’d prefer not to use Bypass, as I want to keep both options available without having to unplug 6 times, which is required to reset the Starlink Router to remove bypass. Or will making this change do nothing? Thank you!

@GrabLifeByTheGourlays 6 дней назад

Hey mate, I’ve never used bypass on the Starlink app so wouldn’t know as it would just work. I am still able to do a speed test while using the non Starlink router as it shows online. You just have no option log onto the Starlink Router through the app while using the USB router. You will need to select the router from your wifi list before the Starlink app shows you being online. Have you logged into your router yet? The router should have an IP address that you type into your browsers so you can put passwords and encryption on it etc.

@bugsy1254 14 дней назад

I have gen 3. I was advised to buy Yaosheng 220watt step up and PoE all in one. I bought it and was only then told that I can’t use the SL router with the Yaosheng device. Apparently I also need a third party router. Anyway I ordered GL iNet A1300. This has the usb-c 5 volt port that the Yaosheng device uses. The point is that I should just have stuck with using my inverter or even buying a separate smaller inverter just for SL. That’s what I get for taking advice from FB. The problem is that there is no wiring diagram with the Yaosheng device and they don’t respond to emails. Do you know anything about how it is connected.

@GrabLifeByTheGourlays 14 дней назад

Yeah the 3rd gen Starlink does draw more than the 2nd gen. I’m not 100 percent sure which yaosheng POE you have but here’s a link to a wiring diagram. Hope this helps images.app.goo.gl/4ncGPRMB6z3JbMYu5

@garygadwa3005 Месяц назад

How did you set up the Opal for WiFi Calling??? I have the same system but Wifi Calling is intermittent.

@GrabLifeByTheGourlays Месяц назад

Hey mate, wifi calling can sometimes be hit and miss which is what we found out when we were at Devils Marbles. We’re found that if you put the country code in and then the number it seems to work but we also did turn wifi calling on and off and did the whole IT support trick and restarted our phone! 😂

@just-one-more-NPC Месяц назад

What is the amp draw been like over time? I have heard the starlink connections are quite power hungry. I know you said between 2.4 and 4amps initially but was hoping you have a bit more of an extended insight.

@GrabLifeByTheGourlays Месяц назад

It’s draws about 4amps on startup when it’s booting up and trying to locate satellites etc but then fluctuates between 2 & 3 amps generally. Just tested it on our portable Bluetti AC180 Power Station which gives a live readout display. The above figures include the USB-C router connected to the same power source as everything is connected on the one fuse block

@jeffmcg54 2 месяца назад

Thanks for the video...great clear info and Iam onto it. :) I purchased a 1200w 20 amp dc-dc boost converter from Aliexpress for under $20 delivered. should do the trick. (I hope) Cheers

@GrabLifeByTheGourlays 2 месяца назад

Fingers crossed mate and thanks for tuning in legend!🤙🏽

@mauriciorojas7171 4 месяца назад

This video is very helpful, thanks. I have two questions: Once I have the 12 volt hardware setup ready, should I just unplug the Starlink dishy cable from the original router and plug it into the new adapter? It should automatically work with the new router? Are there any configuration modifications to do on the Starlink App? Thanks again.

@GrabLifeByTheGourlays 4 месяца назад

Hey legend, thanks for tuning in! The dish should automatically work with the new router except you can’t control the router from the Starlink app. You’ll have to log into the router with a generic password through an IP address that comes with the router instructions, then you can change passwords etc… you can still control the dish through the Starlink app though.

@AussieTracks 4 месяца назад

Great video mate. Subscribed. Quick question, how do you find the operating temperature with the yellow box? Do you leave the lid cover in an open position ? Best wishes

@GrabLifeByTheGourlays 4 месяца назад

Thanks for subscribing you bloody legend!🤙🏽 As for the temp, I’ve been closely watching it to see if it gets hot and it hasn’t except for one time when I accidentally left it in full sun but it still worked perfectly though I wouldn’t recommend doing that too often! I do have the fan on hand to install if I think it needs it but at the moment it doesn’t! I’ll do an update if the fan is needed!

@daviddawson2411 3 месяца назад

Hey mate can you make me one

@GrabLifeByTheGourlays 3 месяца назад

Hey legend, currently doing a lap of Australia but I can say that the case has held up well even in the Outback! 🤙🏽

@DerekN66 3 месяца назад

Hi, I made the box as per your instructions and parts. When I powered it up, the router powered up fine and I could login using the generic router password and I got a green LED on the POE injector but no life in the Starlink dish and just coming up disconnected on the Starlink app. Do you think running it on 240V and setting to Bypass mode before trying again would work or do I have a DOA RJ45 ethernet adapter or dodgy ethernet cable between the POE and RJ45 ethernet adaptor?

@GrabLifeByTheGourlays 3 месяца назад

Hey Derek, maybe you have a component DOA which can happen. I initially had a DOA 12v to USB-C though I had a spare one to try it out which worked perfectly until the replacement arrived! I never ran it on bypass mode I just plugged everything in and it worked (apart from the USBC adapter). You’ll have to somehow test each individual component. Try different cables to see if they’re dodgy.

@DerekN66 3 месяца назад

OK, thanks. Is the little ethernet cable between the POE and RJ45 adapter a standard Cat 4 ethernet cable?

@DReal_Bull 3 месяца назад

Fantastic idea and I think it’s a great idea. Now subscribed. Keep it coming

@GrabLifeByTheGourlays 3 месяца назад

You bloody legend mate! 👊🏽 I like the case as you can take in anywhere and not worry about it getting knocked around or damaged. I’ve even left it out in the rain and it’s been fine. I’m still testing to see if it needs the fan in the case to keep things cooler but it’s been alright so far. The fan is there waiting if I need! 🤙🏽

@SteveWB 5 месяцев назад

Great how to! Beautiful location.

@GrabLifeByTheGourlays 5 месяцев назад

Thanks mate, it was pretty good!🙌🏾

@maximgaluza 2 месяца назад

Lou Diamond Phillips :) :) ;)

@GrabLifeByTheGourlays 2 месяца назад

La La La La Bamba 🕺🏽

@pmurphy12667 4 месяца назад

is this for the gen 2 or gen 3 starlink as some say a 56v dc dc converter is needed for the gen 3. Thanks for the clarification

@GrabLifeByTheGourlays 4 месяца назад

This is for the Gen 2 which is what I have but you could always get the right step up converter to match the Gen 3!

@GrabLifeByTheGourlays 2 месяца назад

@@pmurphy12667 this is for Gen 2 which is what we have. You’re right, The Gen 3 needs a bigger step up converter as it uses more power!🙌🏾

@bradymalaki 5 месяцев назад

What’s the range like with the router

@GrabLifeByTheGourlays 5 месяцев назад

The range is pretty good, better than what we were getting with the Starlink Router! I’ll have to check the actual range but when we had the Starlink router, we couldn’t even get signal from a couple of caravans away!😬 it also depends on where you have the router placed too! 😃

@anthonycumner3120 5 месяцев назад

Would you be interested in building me one. 60 year old and no idea. Live in Queensland

@GrabLifeByTheGourlays 5 месяцев назад

Hey mate, I would if I could but we’re currently travelling full time on the road around Australia 🇦🇺 so we’re at a different location every couple of days! Ordering parts and putting it together is the easy bit, having an address to send them to is the difficult part for us! 😀

@anthonycumner3120 5 месяцев назад

Got it to work thank you

@GrabLifeByTheGourlays 5 месяцев назад

@anthonycumner3120 that’s so awesome, what a legend!🙌🏾

@darylmartin9833 5 месяцев назад

How do you set up the router? Do you have to go into the settings and change anything?

@GrabLifeByTheGourlays 5 месяцев назад

You don’t set up the router through the Starlink app. The router will automatically send a wifi signal and you can log into it from the address that the router instructions gives you. Then you can set a password to your wifi

@darylmartin9833 5 месяцев назад

@@GrabLifeByTheGourlays No worries. Thanks for the swift reply.

@GrabLifeByTheGourlays 5 месяцев назад

No worries! Happy to help!

@fftcdragonboy7999 3 месяца назад

what the range like

@GrabLifeByTheGourlays 3 месяца назад

Hey legend, I haven’t officially measured it but it’s probably around 50 meters! 🙌🏾

@fftcdragonboy7999 3 месяца назад

@@GrabLifeByTheGourlays ah if u could measure it be great as I wanner but router with good range as I'm sharing it with mum caravan

@GrabLifeByTheGourlays 3 месяца назад

@@fftcdragonboy7999 I was on the other side of camp saying goodbye to friends and we still had signal. There are a lot of factors that can affect signal. We have our box outside under the wheel arch of the caravan. Caravans can be well insulated which can affect signal. 🤙🏽

@fftcdragonboy7999 3 месяца назад

@GrabLifeByTheGourlays sounds good was goner build mine same as yours so I can swicht it around on different battery's xD

@GrabLifeByTheGourlays 3 месяца назад

@@fftcdragonboy7999 we like it because it’s portable, water resistant, tough and rugged. 🤙🏽 It suits our needs while travelling full time around Australia! 🙌🏾