Creality CR-10 Calibration, Settings, and First Print!

Подписаться 33 тыс.

Просмотров 221 тыс.

50% 1

Buy the Creality CR-10:
www.gearbest.com/3d-printers-...
In this video I show how to calibrate the Creality CR-10, go through the settings menu, and complete the first print.
Join the community discord:
3dnow.cc/discord
Cura Slicer Software: ultimaker.com/en/products/ult...
Thingiverse: www.thingiverse.com/
3D Benchy: www.thingiverse.com/thing:763622
Cura Tutorial Video: • Sunhokey reprap Prusa ...
________________________________________________
Awesome 3D Printing Products (Affiliate Links):
Gearbest: bit.ly/39DKUYE
FilamentOne: bit.ly/2R70qWD
Slice Engineering: bit.ly/39ELENt
________________________________________________
Visit my website: 3dnow.tech
Follow me on Instagram - / 3d.now
Follow me on Twitter - / 3dnowprinting
Song: Bowling by David Cutter Music

Наука

Опубликовано:

22 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 341

@opmi5683 6 лет назад

My first print (benchy) is about 30 min in - followed your video for initial set up and calibration...super helpful - thanks!!

@Kajerman 4 года назад

That was much needed information. Thank you, sir. I'm currently awaiting my first printer (CR-10S) to come with the mail. Hopefully next week. So excited!

@Twin_Flyer 3 года назад

Just assembled a CR-10 that bought used, last night, will try my first print it tonight with your settings. great video, easy to follow.

@vauxchristo4537 3 года назад

Very well put together. Focused on all the important parts and stuck to the point, exactly what I was looking for. Thanks!

@rucosantana 5 лет назад

Thank you so much for your tutorial! very easy to follow, you made things very clear and I am finally printing my first project! keep up the good work!

@jibi. 2 года назад

finally someone who explains everything step by step, THANK YOU SO MUCH BRO

@m.tekkesschneider8404 6 лет назад

Awesome Video for beginners! I'm using 3 different 3d printers, but I wish I had such a video as I get my first printer! Not to many informations about 3d printing. Just the important facts for beginners. I like it!

@ronalddvorak1967 5 лет назад

Your video was very helpful. This CR-10 is my first 3d printer. Thanks for the info.

@Senbonzakura776 6 лет назад

Awesome vid. I just ordered a CR-10 and this will really help me a lot. Thanks

@jalcalahr 4 года назад

Your video is the best one I have found for a beginner. Thank you!

@a40anda47 3 года назад

Great video. First detailed video for beginners. So many videos skip so many steps and leave beginners lost

@FlexterChannel 5 лет назад

I love you!!! I’ve been looking around everywere and noone exept you got me to understand how things work. Thanks!!!

@theAartrip 3 года назад

This was incredibly helpful. Thanks a ton, my first 3DBenchy came out damn near perfect.

@marekita8719 5 лет назад

This video was crazy helpful, and the only one I got useful info from out of a ton of other videos!

@zachholt216 6 лет назад

Just got my first printer - dude this was a world of help. thanks!

@chuckstewart4833 4 года назад

Super helpful video. Using your video for my 12th grade 3D Printing class!

@dawsondeslippe3388 3 года назад

The in depth explanation of how to print was super helpful.

@lmaojust1104 3 года назад

This is an amazing video, thank you so much. I hope this gets shared around a lot

@jonarnejorgensen1179 2 года назад

Great video. I'm printing my first 3D model right now, and it seems to work fine. Thanks a lot. :)

@BVlog09 3 года назад

Thank you! Setting works for my printer. No more failed prints! At last found this easy to follow guide video for newbie like me. Such a big help

@GaryParkin 5 лет назад

Now I can't wait to get my printer. Thanks for making the first time print not so scary. lol (Subscribed)

@Panchothefatcat Год назад

Thank you! Your the only video that actually explained

@Flatlower 5 лет назад

thank you, concise and informative.

@paulthompson1349 Год назад

Wow, this was super helpful!

@chrisdamonsworld 6 лет назад

Good video. I needed one like this to start my printer.

@thelegodoctor932 3 года назад

Thank you! Incredibly helpful!

@Senbonzakura776 6 лет назад

Well, printer came in and followed your set up...Thanks for all the info. It took a bit to get the heating tray right. Heating nozzle kept clogging as I tried the benchy. Then the tape I used as the adhesive worked for a few minutes, but the boat came loose. Though not sure if it was due to the tape or the buildup on the nozzle tip that knocked it off 🤔 but will keep trying 🙂

@kellenwestbrooks9212 5 лет назад

Tanz what did you end up doing? I’m currently running into this problem XD

@carloslanuza4554 Год назад

Thank you for this concise tutorial! Complete noob with no idea on anything 3D print. I had my printer (CR-10 V3) for nearly a week without printing anything and this guided me every step of the way on my first 3D print. My first benchy looks amazing. Really smooth sides and no distortions. Q: Those settings you provided before you sliced are for this specific print? Or is this a general baseline for most 3D prints?

@TRUMP_WAS_RIGHT_ABOUT_EVRYTHNG 2 года назад

thank you for the great video!

@Berserkercustoms44 3 года назад

Can't wait till I receive mine 🙌

@hihahupu 5 лет назад

Thank you for the video it was very helpful. But I still had a lot of difficulty as my nozzle got clogged up, the extruder gear started to grind my filament and the resulting prints had severe under extrusion. After cleaning my nozzle several times and the same thing happened again and again I finally found that my filament required 220 C printing temperature to work properly. I would just say that setting up the nozzle temperature higher for the first prints makes it easier to find out all the other settings that are wrong too.

@redbart7677 4 года назад

I can't thank you enough for this post! I was pulling my hair out about what I was doing wrong with my brand new CR10 S5. Raising the nozzle temp to 220 solved all my problems. Didn't help that the test print that came with the printer was set at a temp of 200 and the filament that also came with the same printer apparently needs 220. Thanks!

@SUB13333 4 года назад

thanks for the tips! it is so much easier than like 4 years ago!!! it took me 20 minutes from box to 1st print ! and the base seems to be perfect ! ( at least for a beginner ). i got exitied as hell seeing it for the 1st time :D

@TheGamingREZ 3 года назад

my printer just started printing, cant wait till its done

@JohnnyDemonicus Год назад

Dude, Thank You!!!

@cptjack80 5 лет назад

Really appreciate this video! Thanks man!

@cptjack80 5 лет назад

I am having some trouble with my printing on this. I am going to move it to a table and tighten up the bed wheels, check the belts and try your leveling method then print again. I can send you some examples if that would help, maybe you know whats wrong.

@tronicHardware 6 лет назад

Nice video mate

@TheLeontheking 5 лет назад

super helpful!!

@aristoteles5215 5 лет назад

Well, good preparation indeed is half the work... thanks to your "tutorial", my first print is now well underway, and without any hitches, (so far, that is.....) Thanks!

@BedrockBreakerzYT 5 лет назад

supa thanks for the video!!!

@Kyle1237 3 года назад

3d benchy is currently being printed its kinda satisfying watching it lol

@steveu235 5 лет назад

After setting mine up I can see a dual Z axis screw is an advantage, the 2 sides will move up and down more evenly. I ordered one from Alibaba express.

@noway8233 4 года назад

Yuo need to adjust the excentric pern of the x axes

@thatvolvomackguy5361 3 года назад

Hey thank you so much! Great content! I have a question... I start to print but it gets about quarter of the way and the print completly moves so its ruined. I played around with nozzle temp and bed temp. I cannot figure it out and I cannot find anything on the web.

@whoawhoa77 6 лет назад

Hi! Great Video. Can you post the settings you used for on cura for the PLA for you print? Thanks

@3DNow 6 лет назад

I just used the default cura settings with 2 outer shells, 195c extruder, 60c bed, 15 percent infill, 2 top and bottom layers, and 60 mm/s speed

@benholmes7501 2 года назад

Hi there, I have followed your guide but a couple of the options in the settings menu are missing in cura print settings. so I'm curious if that'll cause issues.

@dutchpapergirl 6 лет назад

Hi there, I enjoyed watching your video; very helpful!!! Now I have printed the benchy. Looks very smooth, but for one thing... The inside of the roof has threads. How to solve that?

@3DNow 6 лет назад

Try increasing your top layers in the cura slicer

@dutchpapergirl 6 лет назад

Hi before I am going to print again... I noticed the belt on te x is catching with the sharp edge of te metal(on the right side) . Tried to move it to the middle, but it moved right back. It is damaging the belt... What to do?

@matthewdavidson8920 6 лет назад

Thanks I got a cr-10 today amd the prints did not stick to the bed and this video was helpful

@pcgstig190 5 лет назад

exact same thing for me

@_MoRZiLLo50 6 лет назад

Nice! Suscribed! :)

@TJ-ck6jb 4 года назад

Does this apply to the cr-10 mini as well? Thank you!

@brentgruel5685 4 года назад

Just got a CR-10S to aid in my printing of Covid face shields. This video was of great help, but I am having issues. My auto home is not functioning properly. The head comes to the front of the build plate, but not to the left corner. It comes to the front at whatever left to right position it started from. I have checked and unplugged all cables to no avail. Do you have any experience with this and any tips?

@rvthless8610 5 лет назад

hey i've just recently got the cr-10 and 2 things I need to fix 1. when it prints it doesn't print the bottom letters on the benchy and I check in cura if its working and it looks fine 2. after a couple of days the z motor has stopped moving up and down when it print so when I start the print it does the first layer but doesn't move up when it starts the second but I use the move axis setting to move it with the control panel and it works

@londondrysdale1038 4 года назад

Great video but I cant get the nozzle low enough on the center of the build plate? The axis is at 0.

@brandoncooper1882 4 года назад

Also, using canvas, how do I get it to start printing in the middle of the bed, instead of at the Home spot - front left corner?

@sotkshadow8306 5 лет назад

Hi my cr-10 says its at 210 but its not and won't melt pla because the hotend is not actually hot enough, iv replaced the hole hotend, heat element and thermistor as still not working if its something inside of the control box can you tell me what needs replacing or what to look for and how so I can fix it please

@MrMusiclovelife 2 месяца назад

You fixed my printer..thank you!!

@1501418 2 года назад

Heyy!! My print came out kinda stringy... I used the same setting for the temperature that’s specified on the filament, should I lower it?

@theturtlemaster7438 2 года назад

Hi I just got the Cr-10 V2 and i've got all this down but for every print it prints a 1.11 mm base then the actual print on top of it, I was wondering if there was a way to get rid of this or tweak it so its only 1mm. It get complicated especially when you have to color change at a certain z axis height and its different from what it say because the 1.11mm base.

@ioannisliakos5614 5 лет назад

Can you print PCL and add also a preheat PCL function on the screen?

@zenku41 3 года назад

Not all of the wheels in my cr10s bed came with tightening screws, is this normal? :( only three of them

@sebastiancorral7791 5 лет назад

Finally, clear bullshit-less instructions. Thank you

@juerhe1 5 лет назад

@3dNow , Thanks a lot! I not realy understand the end of printing! What do i have to do exactly after the printing? I mean, so that the nozzle is clean etc.? Can you give me a little tutorial123?

@3DNow 5 лет назад

When the print is over just take the filament out of the printer. There is nothing to do with the nozzle.

@dmattheson12 4 года назад

After my first print i didnt take the PLA out or cool the machine down. Now im trying to print again and having trouble with the material coming out properly. Do I need to clean the nozzle somewhere? its fine when i heat up and push material out but when i print its not really coming through.

@ronmyts5712 Год назад

I know you put this up a few years ago, but I’m hoping you can help. With my cr-10 every time I print I need to go in the tuning menu and set the filament feed to 200, is there a way to permanently set this feed ?

@ronaldzuidhof9715 5 лет назад

great tutorial.I am printing my first benchy right now. Lets see how it comes out

@colesolomon945 3 года назад

Can I change the home position because when I try to level the printer the nozzle hits the bed because it can’t go down any further should I get a new bed?

@jonhuss6783 3 года назад

Hello, I have a Creality CR-10 with dual z axis motors. The z axis goes up and down when homing but will not go up when printing. Is it the machine or am i doing something wrong in Cura ?

@blair183 3 года назад

Ok been following this, my item keeps slipping on the bed....do i put anything on the glass? i have the metal base bed, then paper on top, then the glass....is that right?

@burhanshahid5 4 года назад

Hi, Im having Troubles to Download Cura software on my Mac

@jamiemonge7330 2 года назад

The first thing I printed was a preinstalled cat stl from Creality for my CR-10 which printed just fine in the center of the bed, but when I downloaded an stl from Thingiverse and tried to print, it started printing from the home position. Any idea on how I can make it print in the center. I tried with two different stls, and the same thing happened. I cancelled the prints so I don't know it they would have come out correct. I didn't want to waste the PLA. I tried another preinstalled from Creality, and that one printed just fine in the center. All four stls were in the center of the bed on the preparation screen.

@manicmechanic3824 2 года назад

hey man I've looked everywhere and I can't figure out how to do this. I have raised the bed, tightened the springs, clamped the bed down lower, etc. But i have still yet to figure out why the nozzle will not auto stop .11 mm above the bed. It always hits the bed no matter what I do. please help.

@kathyleblanc-hart5505 2 года назад

We just got the CR-10S. We are trying to print the cat that is already n the file. It is printing with tiny holes in it. We’ve set it up a few times, trying to troubleshoot. Any ideas?

@darbycarpenter3032 4 года назад

Great tutorial. I was thinking about getting the MakerBot but I am now leaning towards the CR-10. The one reason I was thinking about the MakerBot is because of the digitizer. Do you know if the MakerBot digitizer is compatible with the CR-10? And/or can you recommend one? Thank you.

@3DNow 4 года назад

I would not recommend a MakerBot. Closed source, non-upgradable, really expensive, average print quality, proprietary software, etc.

@jmh25jmh 2 года назад

I just bought a Creality cr 10 S And wondering what your flow speed Hass to be at when you are printing I have to turn mine up to 300 to make a decent print but I don’t think that’s normal

@airgunningyup 6 лет назад

after disabling steppers ( which I haven't done ) do they automatically come back on when I'm ready to print ?

@3DNow 6 лет назад

Yes. The disabling just 'unlocks' them until they are told to move again.

@JohnSmith-un9fy 4 года назад

I have a few questions. Why remove the plastic from the printer at all? It seems to be a wasted step. Is there something wrong with the CR10? I own a Trinus and I have never removed the PLA after any print. It has always been fine. Has not hurt the tip for over 2 years. Also when you turn off the printer it will cool down on its own without electricity. Is there some reason that you have to instruct the machineto cool down? I have ordered the CR10s to make bigger prints and the reviews are great on this machine. It does not look like it will be as easy to use as my Trinus but not to complicated.

@Nintendogamerfamily 6 лет назад

Hi I did all this and thanks for your help. I still have a problem though. The printer doesnt feed the filament fast enough. If i gently help it to feed it work but as soon as i leave, it doesnt print.

@3DNow 6 лет назад

Make sure your flow rate and nozzle diameters are correct in the slicer. Also, the nozzle might be slightly clogged or the extruder might not be gripping the filament correctly. Try to fix those things. It might help!

@masulsa40 3 года назад

Is the calibration that you showed only for the benchy? Also, what should the Z axis height show at the very beginning of the print? It homes to zero. When the first layer is printer, should it still be at zero?

@3DNow 3 года назад

Check out this updated video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vvp8whpRkw4.html

@cadet5831 3 года назад

How do I change the height of the nozzle? It's digging into the tape whenever I print and it's kinda annoying to replace all that wasted tape

@gamersnake8332 5 лет назад

So one of my nobs that you use to bed level on the Cr-10s doesn't work right. It spins a bunch and doesn't tighten up like all the rest. Could someone please help me if you know what's wrong. Thanks

@ThorOsta 3 года назад

very helpful video I just bought a CR-10 (500x500x500mm) I assembled it the best i could, I'm left with a "Z" & "Filament Dectector" wire/connector, I'm not seeing a location as to where these connectors go.. any advice? thank you ------ thumbs up

@ThorOsta 3 года назад

I was missing the Z connector on the other side- so that is fixed. The “ Filament Detector” that has a place or no?

@stanmarymee4230 Год назад

12:06 While setting it up, and person that was over said he was going to level the bed. In reality I believe he changed some settings because the Y aces will not auto home. It auto homes the right way for the X and Z aces, but not the Y. It’s in the middle of the Y aces and when you manually move it, it will not go forward past the middle of the Y aces. But when I manually dial it for the middle of the board, it’s at the very back edge of the Y aces. If I try to go past that even further it stops and makes a grinding noise. Do you know how to fix this? 12:06

@CrazyDriftKing16 5 лет назад

I have an issue where when I select Auto Home the nozzle pushes down on the build surface considerably. As this is my first 3D printer I don’t know how to change the Z axis to a new default value. I also don’t know what changing the nozzle offset means or does.

@3DNow 5 лет назад

Adjust the height of he bed with the 4 adjustment screws. Also, you can move the z axis limit switch up a little.

@marianarosado4803 6 лет назад

I did check my connection with your video. Everything look fine and correct. The 3d printer show this CCR10_3DBenchy but the printer never move to do the print. I did check the setting again and said stop printing. Any idea where is the problem?

@3DNow 6 лет назад

Make sure all of your connections on the printer is correct. Also, try moving the print head with the screen

@musicbeats4674 3 года назад

mine print keeps on having elephants foot, also the bed leveler on the far left side doesn't go up as high as the other 3. any fix to that

@SouthShoreSabers 5 лет назад

For the glue stick - is there a certain brand you have seen work the best? and do you just clean it off with water once you complete your print?

@3DNow 5 лет назад

Any glue stick will work, and I don't clean off the bed after a print. You can use the extra glue for the next print.

@rayob 4 года назад

what about the pre loaded samples that come with printer do I need to go to a cura program first

@3DNow 4 года назад

No, not for those

@landenkrause9321 3 года назад

Do I have to do something to freely move any of the axis?

@spa5e 4 года назад

Hiii! got my hands on a 3d printer myself (750 euro) But everytime i try to print: it goes crazy and spills all filament orrr starts way to high (i know bed leveling) can you please help? it randomly starts at the side too instead of the middle🤯🙄😥 It tends to go too fast i think?? It does not stay on the bed

@tomherd4179 6 лет назад

Good video for beginners (me). I am getting prints, but am starting to think my extruder needs calibration. Other videos show the 100mm of filament to be marked then run it through the extruder, measure the +/- distance and input a fix. My problem starts with "run it through the extruder" how? Next "input a fix", I don't know G-code, or even how or where to look for it. One mentioned arduino code, again not a computer wiz. Is there a simple way of doing this through the commands in the CR-10 and/or CURA???

@3DNow 6 лет назад

You can extrude a certain amount of filament through the control, move axis, 100mm, extruder settings. Then you can adjust through the motor settings

@tomherd4179 6 лет назад

Thank you for the answer, but having had no experience with the terminology or a 3D printer I still am confused. I know how to move the axis and can move it 100mm X, Y, or Z. Then I have no idea how to make it extrude or where the motor settings are. I went through the menu and nothing clearly indicated either of these. Sorry about not being able to follow your direction.

@3DNow 6 лет назад

It's fine! In the prepare, move axis, 100mm, then click extruder settings. If that is not there, then play around with the settings menu until you find the move axis setting. Select the extruder option. If there is no extruder option, then select the 1mm movement and do it 100 times to get the 100mm

@REAL_MPSS 5 лет назад

This is a setup video but I didn't see any calibration. Great for a beginner on that or the Adimlab clone.

@hamzahbarlas5129 6 лет назад

Can you please tell me how to tighten the bottom belt I tried tightening the front screws and it was still loose

@3DNow 6 лет назад

You have to go under the bed and remove the zip ties. They make it tighter and put the zip ties back on

@holeshotfpv4971 5 лет назад

Very informative. I do have this printer and prints very well. But, when i select auto home the extruder moves to the left of the bed but not the left corner.

@patriotsfan1236 5 лет назад

the extruder doesn't move...

@holeshotfpv4971 5 лет назад

Sorry...i am new to printing. The Y axis isn’t moving for the extruder to be in the front left corner when i select auto home.

@patriotsfan1236 5 лет назад

Are you trying to level the bed?. That's odd

@holeshotfpv4971 5 лет назад

Bonanza Driver no, it prints fine. When the print ends, it doesnt return to auto home. So, if i forget to disable steppers and manually move the bed to the home position. The next print starts at the back of the bed and the extruder fall off the glass. Any fix?

@charliehu4791 6 лет назад

After printing the benchy with your settings, I noticed that there were gaps in the plastic on the deck, what do you think happened and what should I do stop this problem?

@3DNow 6 лет назад

Charlie Hu that might be because your bed is not hot enough or your bed does not have good enough adhesion. Try using a glue stick on the glass bed or painters tape

@starby1243 6 лет назад

Ugly thumbnail but super awesome video. SUBSCRIBED😃 Very informative and very helpful, informative, thank you very much😃

@SouthShoreSabers 5 лет назад

Okay 2nd comment in as many months - why is it that at 5:36 you have the ability to configure your pla preheat settings. Yet on my 2019 CR-10s I don't have that feature (or nearly as many as you do)? Did you update something?

@3DNow 5 лет назад

They probably changed the settings around in more recent printers

@kamilivestreamgaming118 4 года назад

but how about the center? It is still too close to the bed in the center and I can not figure out how to fix that. Every time I print, even tho the 4 corners are a paper thickness apart, it scraps on the board when it prints.

@AlvanLuiz 5 лет назад

hey will the settings apply to CR-10S as well? appreciate the vid, thanks!!

@3DNow 5 лет назад

Yes! They should

@AlvanLuiz 5 лет назад

@@3DNow awesome! Thanks :)

@hijinks21 4 года назад

Ever have an issue where cura doesn't move the zaxis up. Other slicers work

@Airyh1 5 лет назад

Any recommendation on using Cura with Windows 10? it doesn't respond , hesitating cannot select options to change setting. Thanks Ray

@3DNow 5 лет назад

Hmm, I don't know. Try uninstalling and reinstalling the program.

@brandoncooper1882 4 года назад

I just got my CR 10s and I've leveled the bed, but once I start printing, the extruder just produces spagetti. It looks like the nozzle starts printing when it's a little high on the z axis. How do I correct this?

@3DNow 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vvp8whpRkw4.html