No video :(

Creality Ender 3- Easy Way To Level Your Bed

Подписаться 297 тыс.

Просмотров 1,9 млн

50% 1

Chuck shows you an Easy Way To Level Your Bed on Creality Ender 3 (or any similar size 3D printer). He uses two GCode files: the first to position the nozzle above the adjustment screws and the second is a test print for live adjusting of the bed. When this is completed your printer is ready to print.
Download all the files for this video here:
shorturl.at/NLnX2
Download also includes files for both smaller and larger printers now.
Also!
Check out my Electronic Bed Level Tool Video:
Filament Friday E-Leveler Bed Leveling Tool Video: • Filament Friday E-Leve...
Filament Friday E-Leveler Tool
amzn.to/3Yz3Vc2
Also check out my latest Cura Profiles for Ender 3 Style Machines:
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
Filament Friday Tool Kit:
amzn.to/2MOR00X
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version with Rubber Grip: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
Rear Spool Holder Design:
bit.ly/3mmFKdj
Tool Holder:
bit.ly/3nAIwLs
Creality Ender 3/CR-10 Parts:
-----------
PTFE Coupling: amzn.to/2BJDog1
Capricorn Tubing: amzn.to/2nI2ipS
CR10/Ender3 Silicon Heater Block Cover: amzn.to/2PaxJ89
CR10/Creality Ender 3 Nozzles: amzn.to/2JF3Ii8
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Buy a Prusa Printers : bit.ly/2M88JjJ
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends:
bit.ly/3yuyuze
Note:
As an Amazon Associate, I earn from qualifying purchases.
Financial Support through Patreon:
/ elproducts
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Filament Friday Playlist:
goo.gl/yJLNhr
Chuck's Arduino Book:
amzn.to/3tA31JP
Chuck's Website:
www.elproducts.com
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,9 тыс.

@FilamentFriday Год назад

Check out my latest tool for leveling your bed. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-715Xop79Sus.html

@goldenhiro 3 года назад

Almost returned the printer as it was driving me absolutely mad failing near enough every single print! Can't thank you enough!

@Koolkole27 3 года назад

I have and still have the same problem

@cookiecrumb3456 2 года назад

Same here, still driving me mad. Just can’t get it right.

@lucasjohnson6 2 года назад

@@cookiecrumb3456 you gotta use a glue stick.

@zimtheinvaderofficial 2 года назад

wym

@Jqkzy 2 года назад

@@lucasjohnson6 I have the same problem glued stick didn’t work for me just made a huge mess and ruined my bed

@CrashCastle 5 лет назад

This guy knows his stuff. this is so much easier compared to what I was doing

@quake55 3 года назад

As someone brand new to 3d printing, this is by far the best video for learning how to manually level your bed. the calibration square and physically interacting with it is very helpful. thanks!

@delicious_lunch3823 2 года назад

I've been printing on and off for years, and leveling has been the single most frustrating aspect of the entire field for me. This procedure is a million times better and more reliable then anything I was doing previously. Thank you so much!

@rima1815 5 лет назад

Sir, you are the best, really. I had seen so many videos about 3D printing, but your's are so expetional ! You make it so naturally, without any usless move or word. Thank you!!!!

@FilamentFriday 5 лет назад

Thanks.

@ozog109 4 года назад

Completely agree with OP. I dont need to know the DNA makeup of my printer. Just need teh facts! Thank you for your videos!

@TheKoolBean 4 года назад

Again agree with OP, no use of jargon, straight to the point at the g code worked amazing, thank you!

@spencerziegler2374 2 года назад

When I tell you that I was so frustrated with this process that I nearly gave up on 3d printing, I truly mean it. I've spent hours trying to level my bed with no success and kept ending up with prints that didn't stick or big, tangled messes. I watched every How To on RU-vid before I found this and I am so glad I did. Thank you! My print is looking great, adhered well, and the bed seems level after the first run!

@FilamentFriday 2 года назад

Glad I could help.

@NimaEUUS 2 года назад

haha kinda had the same frustrations but this helped. Got my second 3d printer, now onto this bed leveling process again LOL..

@galaxyguardian8230 2 года назад

This saved me from raging at my printer after having a week of bed leveling issues. Leveling doesn't seem like a chore anymore. Thanks!

@LightShadow122 2 года назад

You have saved me from more wasted efforts and filled me with more excitement; leveling was such a difficult hurdle to jump over and you provided me a ladder. Thanks, man.

@FilamentFriday 2 года назад

Glad I could help.

@cyclops8238 Год назад

@@FilamentFriday I was getting so frustrated with leveling it and you completely fixed my problem. Thank you👍

@gf6368 5 лет назад

love your logical approach to problem solving and how you present the solutions, I was getting sick of all those "teens with 3dprinters" tutorials

@seths_ma6766 5 лет назад

EXACTLY! If you just started your journey the teens skip SSSOOOO much..

@gf6368 5 лет назад

@@seths_ma6766 nah, i mean i hate kids and teens even more and they annoy the shit out of me, i hated them since i was 5.

@snowblindburd 2 года назад

Well, you're officially my 3D printing hero. You somehow made the bed leveling experience enjoyable and not pure torture. I was so happy to see you had files set up for an Ender 3 Max as well. Thank you so much!

@FilamentFriday 2 года назад

Glad to help

@heathdavis8690 Год назад

How do I get the gcode

@Jakeypoo-di6hy 10 месяцев назад

@@FilamentFriday Can you Put PLA filament in 3D Printing machine

@SonNguyen-xe5bf Год назад

I was able to buy this printer for $100 at Microcenter after discounts and promotion. All my other printers had either touch leveling or the built in leveling routine. I didn't even know that Gcode will allow you to move the print head and wait for a user input. Thanks for providing the gcode. Your work is greatly appreciated and saved me a lot of time.

@vgtheory 4 года назад

I spent the afternoon setting up the Ender 3 Pro my lovely wife bought me as an early Xmas present, and thanks to your Bed Level G-Code files, I was able to seemingly properly level my bed and print the test pattern perfectly the first time. I'm now in the middle of printing my first Benchy Boat, so fingers crossed, but thanks so much for the test files and your helpful videos.

@peterclarke5323 5 лет назад

I had spend hours trying to get my new Ender 3 to print. I could not get the first layer to stick to the bed. The only 3d item I was capable of printing was 3d printed spaghetti! After numerous RU-vid videos I found yours. I now have a successful first print! Thank you so much for producing this video.

@KeithBalante 5 лет назад

Spaghetti lol that was my first print too 😂

@Ga5tn 3 года назад

Lifesaver, I was losing my mind and this guide and gcode fixed everything. Thank you.

@irvindeleon7215 3 года назад

First time buying a 3D printer so I’m a noob, I was so confused as to what people in other videos were doing with a piece of paper to level their printer, your video finally gave me a clear explanation !!!

@robmills4709 3 года назад

I find wind up or down until the paper bends when sliding between nozzle and bed,, back off, then adjust till it bends again on all 4 screws, go around a few times. I got mine to 0.05mm across the bed using this method, results via the bed visualiser in Octoprint to show level.

@Boogieboyys 3 месяца назад

been 5 years and in my opinion this is still the best technige for leveling an ender 3. really helped allot thanks!

@windchaser123 Год назад

I've been 3d printing for around 5-6 years and I still come back to this video all the time, thank you for this.

@lunarahzel8669 3 года назад

your tutorial and print file for this has literally saved my life I thought my bed was warped out of box but it was just horribly leveled

@michaelpxd6325 3 года назад

he saved my life too😂

@benclarkson6271 4 месяца назад

This is the first video I have found that actually explains the levelling in terms I can understand. Levelling has driven me mad for years and after moving my printer I needed to level it again, this video helped me get it spot on first time!! Thank you!!

@clarkkent2010 3 года назад

Ender 5 pro newbie. I was beginning to feel a tad deflated after a number of fails. I followed your step by step guide.....and my 3d printing hobby is back on track. many thanks for posting the tutorial.

@CCProdigy 3 года назад

My favorite part of this video is when Chuck says "See if you can knock it off." like he's telling me to stop doing something.

@bitlather 3 года назад

I struggled all day with troubleshooting my first set of problems on my ender 3 v2. I learned about cleaning the nozzle, how an unlevel bed can lead to prints that don't adhere or a nozzle scratching the build plate ... and this video with accompanying files saved the day. Thanks so much!

@TheTechenthusiast69 Год назад

best tutorial ever. I was struggeling with the leveling of my 3d printer (ender 3). But with your help, i managed to improvre my prints by at least 50 percent. The ender 3 even for its age is an amazing 3d printer !

@andrewmelville8560 7 месяцев назад

I received my Ender 3 for Christmas 2023 and I have struggled with levelling and adhesion. This has solved it; marvellous!

@kokopiko 3 года назад

My 6yo son is amazed with my new 3d printer. I`m watching Chep`s video quite a bit and today my son said. "Dad, can we visit this man in his workshop please." :)

@FilamentFriday 3 года назад

Send a self addressed envelope to me and sill send him some stickers. Details at bottom of description.

@MobileDecay 3 года назад

Some people on RU-vid would actually just show up to another RU-vidrs house like that. Lol.

@galyenp 5 лет назад

I purchased an Ender 3 a few days ago and I must have watched this video at least six times from start to finish. I downloaded the gcode files and ran the bed level program three times to ensure the center was set correctly. After the third test, I used the second file to print the squares and it printed perfectly the first time. No loose filament, print held on the print bed, and it had no additional "strings" or flat/high spots on the squares. Thank you so much for this video and the files! This definitely helped me level the bed and ensure I put my Ender together correctly.

@FilamentFriday 5 лет назад

That is great to hear. Thanks for watching.

@JoshyBoy167 2 месяца назад

Where are the bed leveling files

@FilamentFriday 2 месяца назад

Link in video description.

@JoshyBoy167 2 месяца назад

I leveled it perfectly and my build still came off the build plate and caused spaghetti

@FilamentFriday 2 месяца назад

@JoshyBoy-gb3pc - Clean the bed with soapy water and let it dry. Add a layer of glue stick and try again.

@dgentertainment9302 3 года назад

I have owned my Ender 3 Pro since February and even with a BLTouch, I've struggled with my first layer. Failed print after failed print, oh so many failed prints. After following your leveling guide, for the first time, I am printing "The Child" from Mandalorian successfully. Thank you Chuck!

@bot_jonah 5 месяцев назад

I was helped by this video (and many others from this channel) when I got my very first printer (Ender 3) in 2019. I've added countless upgrades over the years including a BL Touch for automatic bed leveling. It has been so reliable for the last two years that I had completely forgotten the basic process of manual leveling...until I needed to do it today while troubleshooting an issue. I was very happy to see that I had saved this video in my Projects playlist all those years ago. It is just as useful to me today as it was back then. Thank you to CHEP for all the time and effort that goes into making high quality educational content that benefits the entire community/hobby/trade!

@deanbestall 5 лет назад

Oh boy this video and the gcode files are a life saver, I've been trying to get my new Ender 3 printing for days. Until I watched this nothing was working. Thank you

@FilamentFriday 5 лет назад

Glad I could help.

@deanbestall 5 лет назад

@@FilamentFriday I'm wondering though, the very next print failed at the first stage, it's a design I downloaded from Thingiverse. It's a tree ornament, I sliced it with Cura with Ender 3 selected as the printer. I left all settings as default. Could this be the issue? I'm using manufacture settings for the PLA, 215° for the nozzle and 70° for the bed.

@deanbestall 5 лет назад

@@FilamentFriday Furthermore, I'm now trying the test file that comes with the printer, the dog. So far so good with this one. Is this because this has been sliced with optimum settings for the Ender 3 and not necessarily the defaults Cura gives it?

@PlayscBricks 5 лет назад

@@deanbestall I just got an ender 3 for christmas. Leveled the bed without this video and printed the dog. Came out great except was a pain to get off the bed. I went to print a new item that I sliced using cura standard draft profile and it wasn't sticking. I thought I didn't clean the bed well enough. Tried and tried again. Found this g-code and the bed was way out of level. Re-leveled with this g-code and it's perfect now. Every time I remove the bed to remove a print I'm definitely leveling the bed. That is until I get my BL touch installed. (This is my first and only foray into 3D printing. I have been watching youtube videos for a month on this stuff.)

@mabisfab77paintball 5 лет назад

mag bed is nightmare as shows any flaw in ally bed and magnet and ally dont expand and contract at same rates the biro pen springs dont help But video sure does thanks chuck's

@BMathiesen 3 года назад

oh my god. so i was always what i thought was "good" or better then average at leveling. Then i installed a BLtouch and though ive gotten decent prints i always kinda suffered from bed leveing. this has ABSOLUTELY fixed it. thank you so so much! love and admire your videos! always seem to help me out! thank you so so so very much!

@cgbolton1 6 месяцев назад

Thank you so much for the awesome procedure. I’ve been battling with my printer for months and couldn’t figure out why it was behaving so badly. I thought I had it leveled just fine but your tests showed how off my printer actually was. I ran the test over and over until I finally got the squares to print properly and stick well. After doing so, I am finally getting proper prints off of my Ender 3. I would recommend this leveling procedure to anyone with an Ender 3 printer!

@sheshmansheshman 4 года назад

i don't know how to thank you man, i was almost giving up and preparing to sell my ender 3 because of bad printing due to wrong bed leveling, now i've followed your instructions, used calibration gcode and it prints perfectly, thank you sooooooooooooo much.

@brendonwhatley 3 года назад

that levelling print saved my life wow

@artemkorshunov2371 5 лет назад

I was struggling with my bed level for some time, not able to obtain the repeatable stable results. With your levelling g-code I finally did it! Thanks a lot!

@FilamentFriday 5 лет назад

Glad it help!

@CosminBuze Год назад

Man, this video changed my life. 😂 I almost gave up on printing and spent hours and hours trying to get the bed leveling right, this video is exactly what it says it is, the best one out there, thank you a lot, God bless your work ! ✨🤗

@FilamentFriday Год назад

Glad it helped.

@dennislee1632 5 месяцев назад

Lucky for me, there are people like you who teach us from your heart and don't charge us for the knowledge sharing from your brain housing to ours.

@anamewithnoface1330 4 года назад

Just got my Ender 3, I wanted a project to occupy myself during quarantine. Thanks so much for the straight forward advice, Helped me get a handle on the whole Deal

@naderdoleh7757 3 года назад

Thank you CHEP. You're videos are incredibly insightful, helpful, and you make it easy for those of us who are new and maybe a bit hesitant to learn more about our machines. In less than 5 minutes, my bed leveling issues have been sorted out. Cheers

@Mnelissen1968 2 года назад

I'm new to 3D printing and I struggled a lot with leveling my printbed. Your video made my day! With your instructions and the Gcode files for the first time I leveled my printbed perfectly. Even more so, my print results are 200% better the ever before. New subscriber..! Many thanks.

@paulbarker7655 Месяц назад

My sons printer wasn't working and print was sliding all over the place. Watched and followed this video and everything was working again. Thanks from both of us.

@KaliBlaz 2 года назад

this is extremely frustrating...

@tkirchmann 2 года назад

How is this not the top comment?

@MichaelLopez-bw9ee Год назад

Fucking agreed

@zackanderson6843 Год назад

There is so much truth here. Christ.

@prohet-econo Год назад

Every time the z height resets like wtf

@ilikecringe Год назад

Seriously what a overrated printer rarely use it because of this

@ssmith65785 4 года назад

A tip for if you still have trouble, make sure your hand isn't resting on the bed or on the bar holding the extruder. The bed will move down and you will not properly calibrate your bed. So if you push down on the bed restart the process to get a proper level bed

@user-cq3oe2pj1y 8 месяцев назад

This video was extremely helpful for leveling my bed. I've been struggling for almost a month now, but after this video? she's OFFICIALLY level. Thank you!

@MotherYuki Год назад

any time I need help with my printer I'm coming to you for help. everyone I have went to failed to help me learn how to fix this. You on the other hand have helped me so much, thank you. this is the second time your videos helped me :)

@petarstoyanov9024 5 лет назад

Absolutely indispensable video, the best explanation for bed leveling that I have seen so far!

@andrewjahnke 3 года назад

Thanks @CHEP - great video! Glad it's working for a lot of people, but FYI it doesn't appear to work with all firmwares yet. I have an Ender 3 Pro running Marlin 0.0.6 dated May 30th 2020 - I ran the M25 as prescribed but it just goes to the first point, stops and does nothing. In your video you make it advance to the next corner just by pushing the button, but that just opens the menu like usual for me. I can select Resume Print, but it proceeds to heat the bed up to 80 degrees when I do. Anyway - looking forward to the next version because I've basically been doing this same procedure manually which is getting really old :)

@filip_kastl_cz 3 года назад

CHEP, you've saved 3D-printing-life of another Ender 3 Pro owner. Thank you for the gcodes - worked well.

@Daz555Daz Месяц назад

Cheers for the continued support. I'd been using the same bed level code I got from you for about 3 years but discovered today that it no longer worked after a recent firmware update on my Ender 3 v2. Thankfully your newer version works perfectly. Many thanks Sir.

@CFaulkstlouis Месяц назад

The links are dead for me where do you get the file?

@davehorlacher 5 лет назад

Something to think about.. I took my Ender 3 bed to an Engineering / Machine Shop and they leveled the bed precisely (as the Ender 3 bed is cheap aluminum and not flat at all) with a mill to a perfect flat surface. They also squared the frame to frame intersections for a true fit. all for about $60.00us

@gadjetsvideo 5 лет назад

One thing to mention that nobody has mentioned in bed leveling videos I've seen. Make sure you don't have a any filament sticking out of the end of the nozzle before you level your bed.... It may seem obvious to most people but you'd be surprised!

@Tennethums1 3 года назад

Or crap stuck underneath your magnetic bed...

@mayerlinlozano7877 Год назад

I normally don’t like to comment on videos but I just wanted to say thank you! The gcode and print helped me so much I couldn’t figure out how to calibrate my new Ender 3 at all until I took the time to watch this video

@BrandoDrum Год назад

I used this method with great success for a year and a half until I started printing larger prints with eSun PLA +. I was getting extruder skipping, stringiness and bumps pretty bad if I tried to print more than 3 objects at a time at full speed. I actually fried the extruder driver on my motherboard I think because my nozzle was too close to the bed just using one sheet of paper. After replacing the board, extruder gear, even the hot end and still getting skipping I decided to lower the bed further and folded my thick printer paper in half and set it loose against the nozzle, just past having it grab at all. That did the trick! Regardless, none of this testing would have been possible without your awesome bed leveling gcode. Thanks so much!!

@dragnet53 3 года назад

I can't believe I had a brain fart when I couldn't figure out why I was getting failed prints. I hope this helps at my end.

@billcar50 3 года назад

Thanks man. Exactly what I needed with no additional nonsense.

@JeremieDeWitt 2 года назад

silicone spacers + this test = happy level bed

@anindian2055 3 года назад

Worked like charm. Initially I thought it is not possible to level the bed with perfection manually. It took some time, but worth it. Thanks for the tutorial and files.

@ParallelSyntax 2 года назад

-Mine just runs through the entire test without pausing/stopping. I think it might be broken.- NVM im an idiot I needed the M25 file. Thanks man!

@uynodlehs 3 года назад

Thank you so much for this video! I had a hard time levelling my bed after multiple attempts but using both the g code and the print g code I was able to print many perfect squares!

@angelabeal3628 2 года назад

If this gets my printer printing again you are going to be my favorite person in the world

@Z-Rabbit Год назад

I am SO GLAD I followed reddit's advice and watched your videos. I'm a complete newbie, I didn't even know what a slicer was until an hour ago. Now I did a test print of benchy (the first few layers), and everything went off without a hitch! Thank you so much! I feel MUCH more confident going forward!

@FilamentFriday Год назад

Glad I could help and it’s nice to know Reddit recommended me.

@FilamentFriday 3 года назад

Creality added 32 bit boards to Ender 3, Ender 3 Pro and Ender 3 V2 and the firmware doesn’t recognize the M0 command. So it may not pause at the corners. See link in video description. You also don’t need the sticker. A piece of paper works the same.

@harammedianews8861 3 года назад

Thanks CHEP!

@stephie3642 3 года назад

I need help! I feel like this was a bad Xmas gift. Can’t seem to understand this. Have a bunch of files of things I would like to print but can’t. Filament gets balled up not sure if it’s the setting on slicer or actual leveling of printer

@seanblue8064 3 года назад

Oh man! I was just running around the internet trying to figure out why it wasn't pausing on the V2 and thought I'd revisit the video to see if I could deduce anything. You're the man, Chep! Thanks!!!

@MitchelHumpherys 3 года назад

When I run the M25 version it heats up the bed and filament after the first "resume"... Is that expected?

@serhatedip 3 года назад

Appreciated!

@FilamentFriday 4 года назад

NOTE: If you have an Ender 3 V2 or a new Ender 3 with a V4.2.2 32 bit board then use the bed_level_4.0 file with M25 in the filename.

@davidbutler1857 4 года назад

Link is broken

@echo5225 4 года назад

I know this doesn't have as much to do with leveling but my z seems tight and doesn't move as fast as yours. How can I check if something is too tight ?

@aceseights1739 3 года назад

Sorryy but the link doesnt work

@chrisbaxter5894 3 года назад

Why does the link not work

@hachimankmd5843 3 года назад

Thank you for this! It made my print much better after I realized there was a bump in the center of the bed.

@ChrisRollason Год назад

After 3 weeks of faffling about trying to get my bed level and even installing a CR touch and still having issues, I followed this guide and got my first mostly decent print. Thank you, thank you, thank you!

@tedhobby 3 года назад

The gcode is really really helpful. Thank you very much.

@ZERO_42069 5 лет назад

Good thing I found your video, I was about to set my ender 3 on fire lol

@unknownflyer90 3 года назад

These black friday sales just saved me hell-eh-bucks.

@nathaliadias1726 2 года назад

This is THE BEST leveling video I've ever watched, your gcode files helped me a lot, thank you so much!!!

@FilamentFriday 2 года назад

You’re welcome.

@jayantabanik2751 3 года назад

Not all heros wear capes.

@cptstardog3553 4 года назад

This was super, duper, extremely helpful! And very simple to follow for a 3D printing newbie like me. Thanks Chuck! I can tell you're going to be a valuable resource for me throughout my printing adventures! +1 Sub.

@Sturdy_Penguin Год назад

I wish I'd watching this before my second print 😅I was digging grooves into my mat with the nozzle from poor adjustment. Now it's doing great thanks to you and the test developer!

@Mike_Rezo 2 года назад

I put my machine away for the last year or so as I got tired of getting it wrong time after time. I got it out today to see if there was something I can find or do. CHEP, you are a legend. I'm printing ABS for the first time ever and it's looking amazing! I'm only 5 minutes into the print and I'm totally overwhelmed, thank you so much!!!!!

@FilamentFriday 2 года назад

Glad I could help.

@alexial 4 года назад

Hi there, I just tried to run the g code to level the bed and it just keeps going round without stopping for me to check with a piece of paper. My Ender 3 Pro is running 0.0.6 firmware. Is there a way to upgrade it back to a more recent version? Many thanks.

@arctic_angel7408 3 года назад

this video was 2 years ago and we are all commenting today. did yall also buy 3d printers for christmas? lol

@user-ve1cc6qn6t 3 года назад

yes

@ralphm6901 3 года назад

I bought a raffle ticket for a good cause, won an Ender 3 Pro. Pretty good return on that investment, I think... :)

@arctic_angel7408 3 года назад

@@ralphm6901 win win

@emcg7654 3 года назад

yeah

@JehRoniMo11 3 года назад

Yes sir, i bought mine for new years eve lol

@samjackson7701 Месяц назад

Just about to start up a print for the first time after my printer has been sitting in storage... Great refresher. Thank you!!

@005child 2 года назад

OH MY GOD YOU ARE A LIFE SAVER I THOUGHT I WASTED $300 FOR THIS BUT THIS HELPED SO MUCH MY PRINTS COME OUT SO WELL THANK YOU THANK YOU

@CL-xe5ks 3 года назад

Because of this video i no longer have to go to the insane asylum. Im a printer now. Thanks

@katsumiyamada5992 3 года назад

Hi thank you so much for uploading these wonderful gcodes. However, I did run the leveling gcode but the nozzle doesn't stop.. I mean it stops but once the nozzle touches bed (supposed to stop) it keeps moving to other position... I'm stuck...

@KingLeemur 3 года назад

same issue here. did you ever figure it out?

@dr0ckstarr 3 года назад

@@KingLeemur Same issue here, too!

@michiganmike20 3 года назад

ever get a fix? i have the same issue

@katsumiyamada5992 3 года назад

@@michiganmike20 CHEP_M25_bed_level.gcode is the solution.

@DeXoDeD 3 года назад

Been Designing for 3D printing since 03, but I've always outsourced the prints to pros with fancy machines. Decided to just get one finally, and man do i feel like a Noob!! Thank you fr this video; helped a bunch

@emanuelcalderon 2 года назад

I love this. There is alot of new begginers that still need this video.

@Devas72 5 лет назад

Hey man this is a very good process to level but in 90% the ender 3 bad is not flat!

@FilamentFriday 5 лет назад

That’s why the live Z is used to finish it off.

@Devas72 5 лет назад

@@FilamentFriday My bad is not flat, the corner is more height than the center. For me best way is to distribute the error all over the bad leveled in relation with the axis and the model. Is it right for you too or I'm in bed?

@FilamentFriday 5 лет назад

That’s why I start at the screws. Most corners are higher than center.

@iPeel 5 лет назад

I use a piece of paper with the arrows showing which way to rotate the wheel for up and down, that way I only have to look at one thing while rotating the wheel with the other hand. I'm easily confused.

@dantem306 2 года назад

Almost 4 years later and this still helps! Thank you

@LuvTruckGarage 3 года назад

Thank you for explaining bed leveling in a way that finally clicked for me. I have been printing projects all weekend.

@applejaxx6322 3 года назад

i guess i just suck at levelling my printer

@MrRamazanLale2 3 года назад

I didn't know Chris Christie was into 3D printing

@mdellertson 5 месяцев назад

The files and instruction you provided were spot on! Now my prints are coming off the bed super easy and clean. Thanks so much!!!

@deathgod3121 2 года назад

this is the best video on bed leveling ... i first saw it in 2019.... now i returned in 2022

@duckduckglowie9619 3 года назад

What do I do or check if my nozzle is to far up even with all of the turning wheels all the way up as far as I can put them? I just put it together yesterday an this is my first time leveling so I'm guessing I did something wrong..

@dmrpro5987 3 года назад

You need to adjust your z-axis switch. The clicky button on the vertical bar is too high and needs to be lowered

@robbinkoot2154 4 года назад

This worked the fist time really good. Now I tried is 3 times in a row, and the layers stick. But if I try to print something else it completely falls off. I've wasted 1/4 if my pla roll on this... I just can't get it to work.

@FilamentFriday 4 года назад

You use the live adjust shown in this video to tweak for the print you are making.

@googlegamer4047 4 года назад

Spray Aquanet on the bed and do the on-the-fly adjustment while it's printing the skirt.

@tazzthedoodle7861 3 года назад

Wow was i way off. I've been struggling for the past 6 month's on and off with failed prints. I wish i would've found this when i started this hobby. Thank you very much and merry Covid 2020 xmas.

@sp17f1re Год назад

Just set my Ender 3 up from Christmas. Leveling was a breeze and I am now on my way to my first print.

@kimliddell7674 3 года назад

I tried this on my ender 3v2, one file moves the nozel to one corner and then does nothing, the other file does go to all four 4 corner, but so quicklt you cant adjust anything..... am i doing something wrong?

@NerdyMoMo 3 года назад

I would say try the one that seems like it's going nowhere and see if you can click resume on the screen

@AdamMann3D 3 года назад

The thing i can't get a straight answer on is how much resistance the paper should have.

@bentegek 3 года назад

I adjust it so its its a little hard to push the paper through but not too hard it folds if that makes any sense.. And I don't lower the nozzle on the paper but slide it under after it's lowered. I would also adjust to do the steps twice or until you don't have to adjust the knobs anymore. Because aligning one know might slightly off set another.

@FilamentFriday 3 года назад

Just get close. The real level happens during live adjust.

@joaquinmaverick82 3 года назад

THANKS!!! I spent the whole weekend leveling the bed, until I get this video, you rock!!

@alextittmann4130 3 года назад

Thank you so much for this tutorial. It works perfectly on my Ender 3 with 4.2.7 board. Leveling was a pain in the a** but with your files and instruction it is quite easy now. Thank you!!

@doodadboy1 5 лет назад

I started trying to do this at 3 o’clock today it is currently 10 o’clock and I have made absolutely no progress

@tgent6133 3 года назад

Mine also not working, we’re you able to fix it?

@brittanycalhoun225 3 года назад

so my level is spot on (I'm inmpressed with myself lol) but my print was not centered. seemed to be just off the left side rather than centered. what would cause that?

@FilamentFriday 3 года назад

Your bed dimension off in the slicer

@corrutodk7131 3 года назад

Duuuuuuuuude. You just saved my life. And my printers. Lol. Your gcode leveller just made my so much easier. THANK YOU! Finally about have some fun with my new printer.