CRG levers, ASV levers vs cheap levers, and dangers. 

there is something else I've noticed at10:22 , i might be wrong but the reservoir looks overfilled , (past max) i have learned to always leave some space for thermal expansion of the brake fluid ,another thing i learned was to only fill up you reservoir to the max when you just placed new brake pads and to make sure the rubber seal is not squished completely against the top cover

Could have over tightened the lever also. Don't think the lever is at fault but incorrect installation. Only issues you might find with cheaper levers is quality and shape. Shape has alot to do with brake feel and how well the brakes bite. Cheaper levers you need to max them out to get a good feel unlike with stock and asv or crg levers.

Hey man do you know which years are interchangeable?

Not lubricating the pivot pin won’t magically make the front brakes engage without input. He said he was riding at a high rate of speed and the lever snapped rearward, and wouldn’t release. That’s not indicative of a pin binding. You could make that argument if he applied the brakes, and the lever wouldn’t release, because the pin was binding. BTW, Brian from STG has a video about levers and how he’s seen many issues with the Amazon brand in this video. You only have so many interfaces between you and the bike; it makes no sense to go cheap. It’s like putting in a knockoff brake pedal on your car.

What is the round cylinder thing called that you said you need to take from the one clutch lever and put into the aftermarket lever? Mine is missing and I need a new one but don’t know what it’s called if you could tell me it would be greatly appreciated please and thank you

So cheap levers didnt cause it. Poor installation did. noted. been running cnc levers for years. its a piece of metal, it should be cheap.

I have cheap levers "ride it" not mzs for past 6 yrs and have had no problems at all with the greased the pins, tighten to correct specs and good to go.only difference is price name price shape&price..lol

Clutch lever slack is 2mm or a.k.a a nickel and should be able to hold the nickel and also pull the nickel out easily.

I'm stuck between CRG and ASV but the owners of CRG or employees won't even contact me back to tell me what sku number for 2024 zx10r so I may go ASV since they have no SKU for 2024 zx10r and won't email or return my voicmail

How did your brakes completely locked in and you did not end up flipping over or fell off the bike? Especially going as fast as you said you were going, that would have been a tragedy. Something ain’t adding 🤔

I am considering some “High Dollar” levers for my OLD 2002 Kawasaki Concours. ASV levers look like the go to lever, but they are $110.00 - $150.00 each side, depending on which you get from the factory! That just seems like a lot over the factory levers to me. I was hoping to get some real constructive reasons to make that jump to light speed, er, costly levers. Your explanation about the carbon fiber weighting a few oz.s less then the ASV levers doesn’t sound very logical, I mean the change in you pocket and keys for home could weight that much! Internal engine components, sure, weight inside the reciprocating mass makes a difference, but not what you carry as levers… . My opinion of course, and I don’t race. I hate to say it, but whomever was the mechanic changing out those levers did NOT demo it very well. It looked like you had the socket at an angle and it wasn’t on the bolt head straight at first! Your rag kept falling off, I mean, really? Sorry, but I’d work on your presentation a bit for next time. Credibility is based on your skill behind the wrench, and you didn’t demonstrate that very well to me.

There is a difference between cheap and quality. The installer is on point when he said he had no issues with the cheap ones and it's how you install them. Cheap does not always equal junk. It's also evident from this video you failed to lubricate the levers properly, thereby creating your own problem. Had you installed them properly you would not have made this video. I think you just wanted an excuse to install those nice AVS levers.......lol

Sounds like bs to me

This is nonsense

So God broke your brake lever? There is nothing on a cheap lever to spontaneously lock your front brake.