Crossover network for 3 way Speaker system

Подписаться 10 тыс.

Просмотров 75 тыс.

50% 1

This video is about how to make a Crossover network for a 3 way Speaker system. Air core coils are used for easy making of coils. All components are available easily.
Those who are interested to know about Sub-woofer network may visit the following link :
• Passive Cross over net...
You may also view the following link for How to assemble a 10" woofer at : • How to assemble a 10 i...
You may see the following link for 2 way 12 dB network
• 2 Way passive Crossove...
Key words :
#crossover
#CrossoverNetwork
#crossover speaker
#3wayCrossoverNetwork
#3wayNetwork
#3 way crossover
#3 way crossover connection
#3 way crossover for speakers
#3 way crossover making
#dividing network 3 way
#CrossoverNetworkfor3waySpeakerSystem
#CrossoverNetworkforThreewaySpeakerSystem
#diy crossover
#ThreewayNetworkHowtomake
#how to make crossover for speaker
#HowtomakeCrossoverNetwork
#3wayCrossoverNetwork
#WhatisCrossoverNetwork

Наука

Опубликовано:

6 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 193

@braveheart2530 3 года назад

Mr. Aloke Mukherjee..... M. D. of MECASONIC...... we are proud of you Sir..... warm regards 👍

@smartshubhro 2 года назад

Brilliant video... Showing the components, circuit and the board development with such minute details is exemplary. Thanks for sharing the video... 🙏

@bomboss5153 2 года назад

Very good jop sir you makit very esy to me thank you sir

@makingloudspeaker 2 года назад

Thanks

@sirajsiraj4443 Год назад

Realy your are great. I great full to you thank you sir🎉❤❤❤❤❤❤

@johnbarnett8650 8 месяцев назад

Great video

@vibhordublish9914 2 года назад

Brilliant. So calm and information rich video. It can be a best tutorial for RU-vidrs who really want to make videos full of knowledge and craftsmanship.

@makingloudspeaker 2 года назад

Thanks

@rajansingaram9371 2 года назад

Nice explanation sir

@makingloudspeaker 2 года назад

Thanks

@ntinosbalentinopoulos3936 Год назад

thanks master 👍👍

@makingloudspeaker Год назад

Thanks

@thomastechnical2075 2 года назад

Verry Good chacha

@makingloudspeaker 2 года назад

Thanks

@pawansaware9676 Год назад

Thanks sir aapne jis tarha se bataya hay. Na or koi nahi bataya hay........ Good example 😊

@makingloudspeaker Год назад

Thanks

@ozeledon 3 года назад

Very much apreciated video! Great results showed.

@Electromechanic1993 5 месяцев назад

Neat and clean...👍 And it would be good if you teach us the whole calculations😊

@vasukiharavu3370 10 месяцев назад

Excellent. Explained clearly . Thank you sir.

@abisaiamatalo2769 3 года назад

Great Video. You are an excellent teacher/ engineer

@nageshtagadur Год назад

knowledge shared is knowledge gained,...my father used to teach me in this way,... always loved a teacher like you,.....!!

@makingloudspeaker Год назад

Thanks

@AVISIKTA1000 2 года назад

Mr.Aloke Mukherjee (MEKASONIC-Dhakuria- Calcutta)------------------ warm regards from 'CHOWDHURY'

@MeetsAudioAmplifierCircuit 3 года назад

Very interesting I appreciate your work

@observenotify8604 7 месяцев назад

Hummmmm. Good.

@Maolana_ModiG Год назад

Ton of thanks sir

@makingloudspeaker Год назад

So nice of you

@JeromeWilkerson 2 года назад

Thank you sir it's a good lesson and understanding also

@niranjanynd 2 года назад

Thank you for guiding sir.

@makingloudspeaker 2 года назад

Thanks

@Relax-zn2yc 2 года назад

You Sir are very intelligent 🙏 thank you for sharing your knowledge 🙏

@makingloudspeaker 2 года назад

Thanks

@satishvasane6812 3 года назад

Thanks brother from Dhule Maharashtra

@celestinoagbayani9198 2 года назад

GOOD DAY THANK YOU VERY MUCH SIR FOR SHARING YOUR AMAZING KNOWLEDGE TO US.

@makingloudspeaker 2 года назад

Thanks

@salmanmorris4484 Год назад

with the experience of life time, You are a Guru

@makingloudspeaker Год назад

Thanks

@asharahmadarrauf 2 года назад

Thanx for video sir. Good to see videos from India.

@makingloudspeaker 2 года назад

Thanks

@althiramakrishna2308 3 года назад

Great sir,for your knowledge

@suji6823 3 года назад

TQ VERY MUCH FOR SIMPLE AND SIMPLE EXPLAIN RRALY GREAT SIR BIG THANKS

@prashantk3269 3 года назад

Sir, Ur explaination is so Simple yet Very Informative, very interesting.Excellent Video 👍🏻

@gamunujayasinghe3829 2 года назад

Very amazing video . Sir , thank you so much for sharing your knowledge. I am from Sri Lanka .

@makingloudspeaker 2 года назад

Thanks

@selvakumar8838 3 года назад

Good experience and explains

@nags944 2 года назад

సూపర్ సర్

@bolovanvalentin1937 2 года назад

Thank you Sir I appreciate your work !!!

@makingloudspeaker 2 года назад

Thanks

@pin2jugad542 2 года назад

Ok thanxs

@MukeshKumar-ne7nl 2 года назад

Very amazing video sir

@Kura_kura_balap 2 года назад

thank you so much sir.. I'm Subscribe you

@makingloudspeaker 2 года назад

Thanks

@griffinacoustics 3 года назад

this was great

@36Nizam 3 года назад

Thanks for the video. Really appreciating you share the info's.. For getting '8-Ohms' total impedance for this Three-way Crossover what should be the speaker's impedences Should be?

@eduwell670 2 года назад

Thank you sir for your practical way construction.

@makingloudspeaker 2 года назад

Thanks

@BirbhumBaulStudio 3 года назад

Great video Sir

@praveenc.8341 3 года назад

Super... Super Sir ji... Very useful video.... Good luck... For your channel... 👍

@whitescape 3 года назад

Very informative video. I just subcribed

@yogeshkanwadia1176 3 года назад

superb sir

@josephphter4866 3 года назад

Sopar ❤️ brother thanks ❤️🇮🇳

@santhu669 3 года назад

Superb

@GAURAENT 3 года назад

Very well explained kindly suggest some god brands tweeter and woofers ..I used to have philips woofer and dome tweeted but not these are discontinued ..I wi appreciated your reply

@deepcool5497 3 года назад

gr8 Sir

@GAURAENT 3 года назад

Very we explained

@chandrakumargurung7034 3 года назад

sir I've a homemade amplifier in which 7294ic is used(double ic) I've used 12-0-12 3amp transformer for powersupply so what type of crossover should i use..

@timkaufhold6163 3 года назад

Cool

@midnitefreakin 2 года назад

In your next way video, may be, you can do a tutorial on how to connect speakers connections, in parallel or series, to tackle it's ohm and match amplifier impedance.

@BitterTruth123 Год назад

Sir is it possible to make passive crossover for subwoofer with variable resistance (potentiometer) for frequency level adjustment?

@basudevjana3 2 года назад

thanks sir

@makingloudspeaker 2 года назад

Thanks

@basudevjana3 2 года назад

@@makingloudspeaker can you build a pair of 3way passive network kit for me?

@ecliffordkharsyntiew546 8 месяцев назад

Can I use 250v .22mfd N p capastor

@waledabu365 4 месяца назад

how many output watts for that kind of network... thanks the reply.. and more power.

@basudevjana3 2 года назад

sir, can i use it in 400 or 300 watt amplifier? if yes, then what watt woofer speaker and hf can i use?

@suvrasengupta2840 Год назад

Excellent , when we are talking of power , are you refering to RMS power ? Secondly , I have Bolton 10" woofer 8 ohm 60W Model 25 JW 22, Bolton Midrange 8 ohm 60 W Model 12 PM 2 & Philips Dome tweeter . I am looking for a suitable 3 way cross over to listen to the ONKYO AV Receiver in stereo mode. Can you suggest some model ( The existing networks were from Bolton Model 312BN2, dont want use it as not aware of the specification) Can you kindly tell me number of turns required for 3.2 & 0.18 mH ?

@makingloudspeaker Год назад

You may try SYCO 3CO12L network from N.G.Electronics Kolkata. Ph 7439728737

@suchitgaurkar2491 7 месяцев назад

Sir can use polar capacitor instead of 2.2 capacitor

@broxagaming7430 2 года назад

Why crossovers on AliExpress have extra capictors and resistance aswell coin please explain? is they sound better than this?

@yashwanthachar6098 Год назад

Sir can we use it for 8 ohms ?

@ranajeetidutta 5 месяцев назад

Sir can you teach how to make electric guitar pickup? Please.

@Audioonabudget1 2 года назад

Tell us the cut o frequency in this crossover

@teenfitness3759 3 года назад

Sir can u give the dimensions of a 12 Inc's 2 way speaker enclosure thanks...

@Tactar.safari.9057. 3 месяца назад

10 ohm resistor us kar sakta hu kya sar

@jainarayan1755 3 года назад

Ware you live

@chandanbasak 3 года назад

Thank you sir...from where we can buy your crossover?I need 3-way 12db with four coils.

@makingloudspeaker 3 года назад

Please contact me at whatsapp no 9007400622

@awaazmatroko5972 2 года назад

You are a master in your job!!!! I need to passive 3way crossover to be made, sub woofer + mid bass + hise, pls need to contact you

@satheeshr9063 3 года назад

Crossover basics plz

@Officialrkcreaterstar 7 месяцев назад

Sir aap 2 woofer 150 watt aur 1 tweeter croossower banaiye

@diac580 Год назад

Sir how to match ohms and watts of the three way speaker system to the amp .plz replay

@AnoopSreedharan 2 года назад

Sir from where can buy that capacitor?

@alfredinnes246 2 года назад

The best explanation of of 3 way crossover , sir did u forget ohms , how to get in touch with u sir

@makingloudspeaker 2 года назад

Email makingloudspeaker@gmail.com

@trajeshwar 3 года назад

Please tell us can we add 4 ohm 100w 10" and 8" mid two speaker and 4" tweeter is there any effect on impedance or it will change into 2 ohm our amp support 4 ohm.

@makingloudspeaker 3 года назад

If your mid speakers are 8 ohms, then you can join in parallel to get 4 ohms. If those are 4 ohms then connect a 2 ohms 20 watt resistor in series.

@shahidimran4437 2 года назад

Center channel diy 6". Dual k lie crossover bna dein 6 ohm k lie.

@dondhawal Год назад

Can you create a pair of crossover network and sell? I am looking for one pair.. Will be waiting for your reply

@danzmotovlog3982 2 года назад

Sir how many turns to have 200 watts of coil?

@ecliffordkharsyntiew546 8 месяцев назад

Where to buy these components in india

@hashanmadusanka9731 3 года назад

I want to know the coil size

@ganeshjawale9733 3 года назад

How can I get this product

@arjunsukladasofficial5583 3 года назад

Kitna watt ka speaker laga saktaa hu ismain??

@sakthiaudio771 3 года назад

Sir I need 4 way cross net work design for home audio system 100+100w Stereo Amplifiers....thankyou.... SAKTHI AUDIO- chennai

@nandabalanmariappan2451 3 года назад

Hi sir super I want this 3 way crossover

@makingloudspeaker 3 года назад

Whatsapp to 9007400622

@kcleach9312 3 года назад

i fell asleep a few times but other than that it was ab great video!

@hashanmadusanka9731 3 года назад

Can this be used for amplifiers with 225w + 225w output?

@yerrakrishna1699 2 года назад

Dear friend for 180w 20 swg And for 500 w 16 swg. Sorry for my limited knowledge.

@carlosconde4096 Месяц назад

Please show me a 2.7 mh coil

@faruckfaruck7947 3 года назад

8ohm 12"in subwoofer crossover calculation please video sir

@sugendradas7432 Год назад

Sir 12db 3way cross-over please make a video.

@vicg5323 3 года назад

How do you determine capacitors and inductor for a given speaker driver selection? And why do we need the resistor?

@makingloudspeaker 3 года назад

You may search in net. There are many sites like www.diyaudioandvideo.com/Calculator/ApcSpeakerCrossover to find value of components. Resistors are used to get smooth high frequencies from tweeter

@vicg5323 3 года назад

@@makingloudspeaker i have used many calculators with mixed results. Can you make a video on how you do this?

@balrajacharya 3 года назад

Which multimeter are you using for measuring inductance of coils ?

@makingloudspeaker 3 года назад

It is called LCR meter. You can measure Inductance, capacitance and resistance by this.

@APYAUDIO 2 года назад

Cross meter model

@pradipmanna7471 3 года назад

I want to buy 2 pices of 2 way crossover , please you make for me

@georgeogrady449 Год назад

Is that mono or stereo sir

@ronchinoy Год назад

How do we contact you to make a cross over. I dont have a jig to wind the coils and hand winding is not as neat.

@makingloudspeaker Год назад

You have to get ideas from my earlier videos on Crossover network

@naadbrahmasound2955 2 года назад

Nice Sir, I want to Crossover Frequency of 200 HZ and 2 Khz Because my low frequency driver in efficient for low frequency but not for mid frequency and I want 12 db octave please suggest design and values of component

@makingloudspeaker 2 года назад

You may watch my video on calculating component values for crossover network

@radhaswamig4430 Год назад

Sir 12 inch ke do speaker and ek hise me konsa network use kree??

@makingloudspeaker Год назад

High power crossover networks are available in the market

@alldishsetsankwestbengal1416 2 года назад

I'm Sanku Mondal I live at north 24 in habra , I watch all your videos. Sir I would like to know from you what will be the coil if you use two 50 watt woofer in 100 watt mono amplifier .

@makingloudspeaker 2 года назад

Crossover network is used for frequency separation. You can use one or two woofers for the same cut off frequency. The network shown can handle upto 100 watt. For more power, the resistor wattage to be increased.

@sumitdas3121 3 года назад

Sir can i connect 4 ohm 20w tweeter & 30w 8 ohm woofer to this network

@makingloudspeaker 3 года назад

Yes you can

@taneujyn 2 года назад

Hi , can u help me on reading Midbass 4ohm, 12db slope 80hz-450hz Midrange 4ohm, 12db slope 500hz-4khz Tweeter 4ohm, 12db slope 5k-20khz Wonder u can help me on all this reading for coils and capacitor... Will be running high pass on my amplifiers. Thx in advance

@makingloudspeaker 2 года назад

You can try to get the values from the online calculator in the link below: goodcalculators.com/crossover-calculator/

@ChaitanyaMusic 3 года назад

Sir Estimation Cost ??

@prasad.s6990 2 года назад

Speaker's impedance ???

@GauravSingh-px8rh 3 года назад

How to divide the watts for woofer mid-range and tweeter for 3 way speaker ? How to match the correct woofer mid and tweeter ? My amplifier is 8 ohms 30 watts into 5 channel speakers.

@makingloudspeaker 3 года назад

The network can handle overall power upto 150 watt. No need to devide power separately for woofer, midrange and tweeter. For five channel amplifier the frequency division is built in.

@libin6127 3 года назад

@@makingloudspeaker Can you make crossover network board for mid bass and dual cone speaker 70 RMS each for suround box Home theater Per channel 180 rms ?

@makingloudspeaker 3 года назад

@@libin6127 I make 2 way 12 dB network of 100 watt . Also make 6 dB network in 200 and 300 watt range.

@GauravSingh-px8rh 9 месяцев назад

How much power's (watt's) mid range and tweeter I need to use with the woofer for 3 way speaker ? If I'm using a 20 to 25 watt woofer then what should be the watts of the mid range and tweeter ? How do I match them with the woofer ?Thank you sir for your previous reply.