Crux3 + Insta360 GO | Lets see what it can do!

Подписаться 18 тыс.

Просмотров 23 тыс.

50% 1

Trying out the Happymodel Crux3. The specs are very similar to a Babytooth, but the motor KV is lower because it is designed for 2S. Lets put it to the test and find out what it can do! Product links and related videos below...
Product Links (affiliate links when available):
- Happymodel Crux3 Drone: (banggood: bit.ly/3dbY6rN, getfpv: bit.ly/31lpOgk)
- Replacement Frame (banggood: bit.ly/3spKKyx, getfpv: bit.ly/3d6equ0)
- Replacement Canopy (banggood: bit.ly/2QFZwTP, getfpv: bit.ly/3rolpDG)
- Minimortal-T V2 Crossfire Antenna: bit.ly/39gDRrK
Related Videos You Might Like:
- 2S "Digitooth" (very similar to the Crux3 but with DJI Digital FPV): • DJI Digital FPV on a 3...
- 1S Babytooth with Insta360 GO (yes it can carry it!): • Can this 1S Toothpick ...
- My 33 gram Babytooth build video: • Building the World's L...
- Some insane 1S Babytooth flight footage: • TAKING IT TO THE NEXT ...
Music:
"Win the Day" by Roman Senyk Music (licensed)

Опубликовано:

4 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 177

@MrShutterBug 3 года назад

Fun fact: jello is caused by the rolling shutter effect. It happens when the image shifts due to vibration WHILE the camera is in the middle of reading data from the image sensor. Cameras typically read that data from top to bottom, so jello usually manifests as horizontal waves in the image (because the cam angle shifted since the time the previous rows of pixels were scanned). Well this Insta360 GO is mounted sideways, which means the scan line actually goes from right to left. As a result, the jello in this video forms vertical waves in the image. I wish it wasn’t there, but I still think it’s interesting to see how it works. Other cameras that are capable of high frame rates (120Hz, 240Hz, etc...) often have less jello, even when recording at lower frame rates because the sensor read happens more quickly. That’s really the determining factor.

@Austron 3 года назад

I've been flying this quad quite a bit with the Insta360 Go mount. I actually epoxied the mount directly to the canopy, and that completely eliminated the jello for me. Now that the Insta360 Go 2 is out, though, I'm gonna need to buy a new canopy and make a new mount for it. I'm hoping the extra weight of the Insta360 Go 2 won't hurt the performance too much!

@robertbycapri 3 года назад

@@Austron you are my Hero 🎮🚁 canopy steadier than this too light mount for insta,i am looking forward for insta 2go,and its fpv features wich are interesting 💪

@kolibrif8242 3 года назад

My observation with Caddx Ant Lite on a tiny whoop is that jello is especially visible in very bright situations. It seems to me that in such situations the shutter speed of the camera is fast enough to show the high frequent vibrations of the spinning motors and its disbalance. Counting the jello waves in one image of the video feet may even allow to "calculate" the RPM of your motors. In my case a trial calculation resulted in some reasonable RPM numbers (maybe just by accident?): ~11 jello waves x 60 FPS x 60 s = 39.600 RPM (on a 1s whoop with 19.000 kV motors -> 2.1V). Anybody with similar observations?

@MrShutterBug 3 года назад

@@kolibrif8242 the jello may match motor RPMs, but I don’t think that will always be true. The frame itself could resonate at specific frequencies too. Either way, it’s good to be able to measure the impact! Low shutter speed doesn’t really fix the problem. If there are vibrations, it can still soften your image, but at least the jello won’t be as noticeable. Low shutter speed kind of smooths it out, similar to motion blur. It’s one of the reasons people sometimes say that an ND filter improves jello.

@rolosaenz 3 года назад

Jello can be eliminated most of the time if you balance your props, props suppose to come "perfect" from the factory but most don't, the great thing is that BI blades are easy to balance, TRI blades and up is another story :D , try to balance those props and see if you get rid of the jello. those FPV chops are IMPRESSIVE !!! MAESTRO!!!

@bernhardeisenschink1032 3 года назад

It's always a pleasure to watch your videos. I usually shrinktube the Crossfire antenna on a 2.5mm wide long ziptie (Head cut off) with a tube that barely fits over it because of weight from both sides. Then I take a short bit of the next size and put it over the center, where all the cables meet to protect this area. Works beautiful and holds up well up to now. It holds up better than anything I tried with antenna tubes.

@josephbove7477 3 года назад

Fantastic video and great review. I've looked at this quad but never really gave it serious consideration until now. Thank you. May pick one up. Excellent price for all you get.

@tribefpv 3 года назад

Awesome 1st flight 👍your an amazing pilot my friend. be able to fly like that , straight up. This one looks fun 😃 great content

@Brian-S 3 года назад

This thing is what started my true journey into fpv was the first quad I got after the tinyhawk 2. I liked it quite a bit but I've broken a lot of frames and canopys lol

@fmimages 3 года назад

Since I am laid up now I watch a lot of TV. You had me on the edge going under the park benches. So wow is all I can say from a Pacific Northwest Native.

@medrone7097 3 года назад

Every Shutterbug video is a treat! I look forward to a review without the Insta360 and would love to hear thoughts on 1S vs 2S on this size.

@fpvcruzer 3 года назад

As a beginner in fpv I am absolutely blown away by your flying skills. It was so smooth as you looped and flew over, under and around obstacles... I am super inspired to gain more skills... That 3” drone rips!

@MrShutterBug 3 года назад

Welcome to FPV! It's an amazing hobby! There's always more to learn. As for flying skill, it's just something you gotta practice. The good news is that the more you know, and the more you practice, the more fun it gets! :-)

@fpvcruzer 3 года назад

@@MrShutterBug thanks, that certainly has been my experience, the more I fly the more I enjoy doing it. Thanks for your in depth reviews!

@fpvbudgetbuilds4631 3 года назад

Great video. Cool to see your in the PNW also. Im thinking about going for a small toothpick style quad soon. Fast little bugger you got there.

@ledronosaure6879 3 года назад

Thanks for sharing !

@KolibriFPV 2 года назад

Really great flying!

@trevorimpulsebuyguy6398 3 года назад

I bought one last week and it's worth the price. As far as the antenna they usually send shrink wrap and a small cable tie when you order crossfire on a small quad to make a L or what not. The mini mortal is definitely a safe way to go. I don't know what I was thinking ordering crossfire on a onboard vtx.

@soflorclife6970 3 года назад

Very nice share 🤩🤙🏼 thing rips darn good!

@dylancole2946 3 года назад

Supercool you had a look at this... i bought one a while ago to learn outdoor as ive just been whoopin it up as all my days off seem to be rainy in vancouver.. haven’t gotten to go out and play with it but was wondering what it would be like with a lil hd camera set up instead of the insta and mount... loose a few grams and some drag but still have hd recordings.. Really enjoy your no nonsense channel and short to the point videos.... keep it up, cheers and stay safe...

@MrShutterBug 3 года назад

Do you mean a split hd/FPV cam? You could certainly do that and it would save some weight. Your analog FPV wouldn’t be as good though, because those cameras tend to have a soft FPV image (go figure) and they have more latency. But they can still be fun to fly and record some nice footage. If you go that route, I suggest the runcam split3 nano. There is a version where the dvr board is shaped like a whoop FC. Good luck!

@AsgardStudios 3 года назад

Very nice flying!

@flyfpvfish4962 3 года назад

Nice review 👌.. seems to be a good flyer 👍.. one to get..

@sloogadude840 4 месяца назад

I love my crux 3, totally recommend it, though you definitely need to ziptie and heat shrink the antenna. I have crashed it countless times with the only other issue being the camera breaking after failsafeing it and smashing it into the ground. Quick fix though. I haven't had an other problems and it is an awesome backyard ripper! Good review!

@subtilo3322 3 года назад

It's a powerhouse without the insta. I love it. It's so quite people don't notice it zipping around. I have 2 off them.

@Cre8ionz. 2 года назад

Try out the Fonster Apro Frame (frame needs some modifications to make the fc fit - USB port) (ordered - in the way) Or the HGLRC Petrel 120X frame (only available on Aliexpress) Frame weights: Crux3 = 6 g Fonster Apro = 9 g HGLRC Petrel 120X = 12 g

@chrisbee5481 2 года назад

Love this Hobby. Worked my way down from the DJI FPV Combo to the Emax Babyhawk 2 HD. Now looking for something really small for the garden. Not Sure if 1S Mobilite 7 or this 2S Crux3 ? My flying skills are coming on pretty well. So a bit more Power would be nice. My main wish is for it to be as quiet as possible. Could you tell which one that would be?

@DroneOn 3 года назад

I'm heading in this direction. Trying to decide if I'm going to build or just buy something.

@jercsgn 3 года назад

Nice review!

@leventetoth3892 3 года назад

I would love to see a video about how to modd the vtx antenna! Great video btw.

@SnakeCakeExotics 2 года назад

i second this!

@trajanfpv 3 года назад

Looks like fun.

@CFLDumpsters 2 года назад

Damn, since I built and bought my last drone, fpv has come a long way. This drone flys so good out of the box!! I am used to having to tune a lot and trial and error. I am buying this one cause the 5 inch are BEAST, and a toothpick is a blast and batteries are cheap.

@ssojubomb 2 года назад

스테빌라이저가 필요 없을만큼 깔끔하게 잘 날리시네요.

@WaterBoiGaming. 3 года назад

Shout out from the PNW!!

@makesomemore_ 3 года назад

You should print roogi's battery holder it shaves of a few grams in build

@Darksagan 3 года назад

Little ripper I need that canopy and insta mount.

@balde3867 3 года назад

i'd like to modify the vtx antenna. if you did it already, can you show how?... Thanks Mr !...

@ggwbrc 3 года назад

Awesome video👍 New subscriber from Indonesia👋

@davidlondon3111 3 года назад

Nice flight. Some good obstacles there. How on earth do you find parks with nobody walking around?

@afterburnerrc6333 3 года назад

LOL true, I can arrive on scene with absolutely nobody around and soon as I take off I have every dog walker and kid with a soccer ball in my way!

@onffworld6357 3 года назад

Really nice❗❗❗

@friendlynomad9840 3 года назад

I enjoyed this. Will you be reviewing the Insta 360 Go 2?

@MrShutterBug 3 года назад

Probably not. I don’t have the GO 2 and there’s already a lot of information out there.

@albertocagnin2108 3 года назад

Thank's for your excellent reviews I bought it in november 2020 and i can say it is my favourite, the frame is fragile, but it is one of the most efficent 3 inch. I made some modify, and could reach 39 grams, you should also rotate the board 90 degrees to have the antenna in the back up-straight and free. It change a lot the reception. My next modify is to install the split3 lite to have hd footage. It will be always light.

@Cre8ionz. 2 года назад

Good idea with the VTX antenna 📶 👍🏼 Gonna do that too :)

@Cre8ionz. 2 года назад

@albertocagnin2108 2 года назад

I also rewired the motor with only the insulated copper wire without the silicon wire and save about 0.5 gram each motor so total 2 gram saved.

@Cre8ionz. 2 года назад

@@albertocagnin2108 dude ur crazy 🤪

@Cre8ionz. 2 года назад

@@albertocagnin2108 you also removed the motor plug, right ? Saves about +1 g (if I remember right)

@MrRelys 2 года назад

I had one of these and then proceeded to crash it in a waterfall (with the insta360). Was able to fish it out with a magnet a couple months later but it was already pretty rusted. I would recommend the Crux3 though.

@afterburnerrc6333 3 года назад

Hey great review! I have several of these types of builds but might just have to pick this one up. Off-topic, but really like your jacket, where did you get it?

@MrShutterBug 3 года назад

My jacket? I don't actually know who made. The only branding is by "Young Life", which is an organization my wife volunteers with.

@davidanderson6222 3 года назад

Not much into the go pro thing, I don’t even use my DVR on goggles.....BUT, I love when you come out with new vid 👍🏾 good stuff!

@z15fpv 3 года назад

try vertical mount style for insta360 GO

@MrLootshoot 3 года назад

that Insta thing is shocking...on board DVR will do nicely

@gus8378 3 года назад

I think that if you mount the battery longitudinal you may get less drag

@chadward9523 3 года назад

My thought about the jello is that the camera cover was flexing, which amplified the vibration to the tpu mount.

@MrShutterBug 3 года назад

Do you have one of these? Have you tried other mounting solutions?

@LikWeiLee 3 года назад

@@MrShutterBug I've added double sided tape in between the mount and the canopy. It helps a lot. My crsf antenna got chopped as well. Replaced it with mini immortal T and I've notice the RSSI strength is lower. But who cares it will still out-ranged the video anyway.

@michaelmatthews6421 3 года назад

It's my new favorite daily flier. I get 12 min cruises on 450 2s. 5 to 6 mins on 1s. It's great, and sooo quiet

@nzmfpv 3 года назад

I was looking for an efficent long flying toothpick. What 1s battery did u used? Thanks.

@michaelmatthews6421 3 года назад

@@nzmfpv using 650mah 1s. 450mah on 2s. It's great!!

@nzmfpv 3 года назад

@@michaelmatthews6421 Thats really great. I found flywoo explorer LR 4". Thinking to buy that, i heard its really efficent and can fly 15 minutes with 3s 1000mah battery

@michaelmatthews6421 3 года назад

@@nzmfpv I just ordered the babyhawk2hd. It can go for 20 mins on li ion 3000mah. There's a video from nurkfpv on it. I was gonna go that way till I saw his video. Love babyhawk series. Just made the jump to dji goggles and got new radiomaster tx16s with crossfire module coming. I think the babyhawk may be enough, I'm not looking to go miles, and it's well under 250g with 850 4s

@nzmfpv 3 года назад

@@michaelmatthews6421 I wish i had the digital system and the tx16s. I am unfortunately using flysky so long range is kind of impossible for me. I was thinking about buying it for the long flight times. All my fpv gear is really cheap stuff like vr006 and fs-i6x. The goggles battery lasts like 15-20 minutes. I have to change them lol

@KoichiTanakaBlog 2 года назад

😹 I've had same problem with antenna on crux's first flight.. i've replaced TBS receiver with ELRS receiver, which have integrated antenna.. Thanks for video, it's was interesting to see Crux's flight with insta go cam. I've heard that with such load Crux fly like a cow, but video shows that not all are so bad like I've heard 😂

@onclefly8450 3 года назад

Hi, me it's my favorite 1S 2S 3" for flight 😉

@luis_gbs 3 года назад

Did U make a video where you show how to change such copper antennas to "real" ones? Would be very interested! 😊

@airdevil21 3 года назад

Yes I would like to see that too.

@gaidkey1128 3 года назад

heres a link to a video.its the same concept on this board.theres 2 pads and a little spot in the middle of them where the copper is attached now.

@gaidkey1128 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y47MwTsqB4U.html&ab_channel=AlbertKim

@luis_gbs 3 года назад

@@gaidkey1128 Hey, thank you for the reply but I think this method wouldn't work here. Our antenna has no 2 parts, no GND and signal. It is just a piece of copper plugged trough a hole in the board...

@luis_gbs 3 года назад

@@gaidkey1128 Do you think that is the signal and we could use any free GND pad on the board or wouldn't that work? Thx

@zic2979 3 года назад

Hi, this quad is my daily fly with for 2 Months now an I really love it. I don't use the insta 360 so I would like to know if you're going to make another video about it without the camera, just to know your feelings. Also, will you modify the vtx antenna and share you're work? That would be nice. Thank you

@MrShutterBug 3 года назад

I don’t plan to make another video about the Crux3 but I do have plans for to use these compliments in an upcoming custom build. Stay tuned! 😉

@zic2979 3 года назад

@@MrShutterBug will do🙂

@3DMOFO2020 3 года назад

Great job on the flight I munch rather get my hands on your 3 inch 2s Digitooth instead of the crux3 Nate.

@MrShutterBug 3 года назад

You make like my next project 😉

@3DMOFO2020 3 года назад

@@MrShutterBug Really? I can't wait to see it

@cigartrend 3 года назад

Just got Crux3 just need to get insta 360 go 2..

@Zlowmoo 3 года назад

I had one of these.Hit a bamboo leaf with the front left prop and it fell to the ground.A fet died on the AIO.It was fun for the few times I flew it. RIP :(

@joelewandowski8232 3 года назад

Do you have a general set of pids you put on your drones or is each one individually tuned ? If you do can you share ?

@MrShutterBug 3 года назад

There is no universal tune. For this drone, I didn't change the tune at all, I just flew the tune that Happymodel put on it. When I'm starting a build of my own I usually either start with stock settings, or I copy settings from a previous build (of similar characteristics) as a starting point.

@JP-qq2kn 3 года назад

Bangood sells the same motor but in 11000kv for 1s. You should try to get those and swap the motors to see what that's like. I want to do a 1s li-ion cruiser crux3 build.

@MrShutterBug 3 года назад

I have not used Happymodel's 11,000KV motors but I assume that would be even more like the 1S Babytooth. I've seen a Babytooth cary a li-ion battery, so yes I assume it would work here too. You won't have killer performance with li-ion, but I'll bet it would fly for a long time!

@ruftime 3 года назад

18 seconds into the maiden and he’s flying park benches/concrete❤️

@MrShutterBug 3 года назад

And a full throttle punch out right off the bat! No holding back! ;-)

@drewlyadventures6258 3 года назад

Did you change you PID tuning? It looks more smoother flying rather than stock PID

@MrShutterBug 3 года назад

These are the stock PIDs (bf 4.2.2). Maybe the difference is the Insta360 go slowing it down?

@drewlyadventures6258 3 года назад

Ahh isee, thats maybe why,

@Dreinzf 3 года назад

I had one but never know how powerfull crux3 is... Maybe cause i throttle limit mine to 50%... And i prefer cruising as well... 😛

@dnafpv 3 года назад

Have you figured out any fix for broken or scratched insta 360 go lenses?

@MrShutterBug 3 года назад

No. Sorry. Luckily I haven’t had to deal with that yet.

@DAZprojects 3 года назад

Nice video! I would like to get into fpv and i am thinking to buy a fpv drone under 100$ to fly outdoors and learn some freestyle tricks, in your opinion which drone should I get between the moblite 7, the geelang wasp 85x and this one? If you have other suggestions please let me know! Thanks👍

@MrShutterBug 3 года назад

Hi. I don't know anything about the "wasp". Between the Moblite7 and the Crux3, I would recommend the Moblite if you fly indoors or in your yard (or any small sapce) and the Crux3 if you fly in a larger yard or park. There are lots of other options too, of course. I can't tell you what to get, but I can try to answer specific questions if you have any.

@DAZprojects 3 года назад

@@MrShutterBug i have a big backyard all around my house, but i think i will fly mostly in a small area where there are a some trees, i was thinking about buying the moblite 7 with a canopy to protect the board and mount the camera, and to make it more durable i think i will 3d print a tpu frame like the TKS one, in your opinion is that a good idea? Thanks

@MrShutterBug 3 года назад

@@DAZprojects I don’t know about the TSK frame. TPU alone is too flexible for a whoop frame unless you make it heavy. The frames are normally made of Nylon. R3D Shifters sells 3D printed frames that are good, but I’m not sure what materials they use.

@DAZprojects 3 года назад

@@MrShutterBug ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sZrlFGq8OJo.html i mean something like this, the tpu frame weights 1g more than the carbon one, but It seems to perform quite well

@vannzfpv 2 года назад

Hi bro.. if dont mind which do u prefer.. this drone or geelang wasp 85x? They both 2s ..

@MrShutterBug 2 года назад

I have not tried the wasp 85x, so I can't say for sure. Based on the specs, I think I would prefer the 3" drone.

@robertbycapri 3 года назад

I am actually looking for this sorta of setup light as possibile and fly anywhere indoor, maybe with an insta go2 or even the insta go, enough quality for social media. Im still debated if upgrade to a Better analog goggles or move to Hd dji..and a different setup, any hints ?

@GTXgb-gt8lz 3 года назад

I think orca is making some digital stuff, and fat shark has recently been taking a lot of feedback. if you’ve got all the money in the world go straight for dji but I’m definitely waiting to see what orca has in store for digital

@robertbycapri 3 года назад

@@GTXgb-gt8lz yes im actually keeping my eyes precisely to orqa news,they are very innovative and i am not a super fun of dji policy even if they make awesome products.thx for reply

@FilipRadelic 3 года назад

For a second I thought you had the GO 2. It also suffers from extreme jello with any kind of high frequency vibration, from a quad, rc car, or even when mounted directly on a bicycle. A shame really because it works flawlessly handheld, and the video quality has been improved a LOT.

@MrShutterBug 3 года назад

That’s too bad. I haven’t tried the GO 2 myself.

@dustinwiget8088 3 года назад

Nurk made a video stating he's been working with Insta 360 to fix the problem and I think they have and they're just finalizing the release of the new firmware that should be available soon. Im waiting to see if they fix it before I buy one but the fact they're actually listening to the FPV community and working on it speaks volumes about their company and if they do release a new firmware to fix these issues, I'll be buying one!!

@FilipRadelic 3 года назад

@@dustinwiget8088 yeah their acknowledgment of FPV is why I bought it the moment it went live. Even if they never fix it, it’ll come in handy as a small general purpose action camera and I can just get their SMO 4K for fpv. Done with GoPro. But in Nurk’s video you can still see some jello with the fixed firmware.

@MrShutterBug 3 года назад

@@dustinwiget8088 I do like that Insta360 is listening, but I assume none of the updates will help my GO v1.

@m2kfpv449 3 года назад

Had this Crux3 in my cart several times but always left it over Insta360 GO jello concerns. And HappyModel reliability. Same with NBD whoops that carry the GOv1. If anyone can find a fix on these 1-2S quads for carrying the GO I’m betting we’ll see it here first. Thanks Nate.

@Rolohaun 3 года назад

I have found recording at 60 fps will stop the jello. Anything slower is too slow, the time between each Fram is enough for the image to have changed

@MrShutterBug 3 года назад

The Insta360 GO (v1) records at 25 FPS. It actually has less to do with the frame rate and more to do with the speed at which the camera can read data from its sensor. A camera that is capable of a high frame rate will often have less jello even when recording at a lower frame rate. It has to do with how much the image changes between the time it starts reading an image from the sensor and the time it finishes. Does that make sense?

@zignomontages7468 3 года назад

Can you do a qna like tommorow or next week or whenever that is?

@MrShutterBug 3 года назад

Are you saying that you would like me to do a Q&A livestream? Who else would be interested in that?

@Max_0578 3 года назад

@@MrShutterBug for sure.!

@ferdifant_fpv686 3 года назад

@@MrShutterBug Me! On what platform?

@nzmfpv 3 года назад

@@MrShutterBug Me too!

@Crftbt 3 года назад

Would appreciate more long term experience info and how it compares to Bobs. :)

@MrShutterBug 3 года назад

If I have problems down the road, then I can share that info. However, if I don't have any problems, then that doesn't really prove anything. It takes the experience of a lot more people to get a picture of the overall quality situation. Some people have already shared their experience by commenting on this video, so that's helpful. As for myself, I'm actually about to take the Crux3 apart. I have plans for it. You'll see! ;-)

@Crftbt 3 года назад

@@MrShutterBug Excited!

@nic.h 3 года назад

@@MrShutterBug Will you be doing a review flight without the inst360 go first? 1s?

@jeffclassics 3 года назад

upgrading the vtx antenna to ufl lollipop would be wise or not?

@MrShutterBug 3 года назад

I haven't used the Lollipop specifically. In general, yes switching from a dipole (linear polarized) to a CP (circular polarized) antenna can help as long as it matches the polarization on your goggles. The main strength of a CP antenna is that is can help to reject signals from the opposite polarity. If the drone transmits RHCP in an open field, then the goggles will receive an RHCP signal via direct path. But, if there is also a barn nearby, the goggles may also receive an LHCP signal reflected off the barn. Having an RHCP antenna on the goggles will help to accept the direct path and reject the reflected path.

@Cre8ionz. 3 года назад

📶 Move the VTX antenna upwards !

@aliasrandom9241 3 года назад

mine came with 3.5.7 and I'm thinking about updating to 4.2.2 - are you able to share tune? also does yours come with jesc and bi-directional sensor enabled? cheers

@MrShutterBug 3 года назад

Mine came with Betaflight 4.2.2 preinstalled. Bidirectional DSHOT was already enabled on mine. Here's a full dump. You'll just have to update the settings for the receiver and modes. Happy flying! drive.google.com/file/d/1DRozRQD9ZvM9SqYfC3SYxIYvcQDMd58F/view?usp=sharing

@rcreviews1412 3 года назад

Random question but how long does betafpv to ship and deliver a order?

@MrShutterBug 3 года назад

I think it varies quite a bit. Sometimes it's reasonably quick, especially with the DHL shipping option. However, sometimes it takes them a while to ship it so fast shipping is no guarantee that you'll actually get it quickly.

@juneloko619 3 года назад

Les go 🥽🤙

@airdevil21 3 года назад

I just bought one flew two packs with it. It fly's great had good grip. But I think my larva on 2s is faster.

@dylancole2946 3 года назад

Larva x or larva x hd?

@airdevil21 3 года назад

@@dylancole2946 I have the larva x.

@salmans21 Год назад

Hi, I’m trying to make a baby tooth with naked vista, I can never catch the baby tooth frames in stock so I was wondering if you think a naked vista would work with the crux? Has anyone added a vista to this little drone? Does it have enough power on 2s with the added weight of the naked vista??

@MrShutterBug Год назад

The Crux 3 frame is pretty flimsy. I would recommend something stronger since you will have a little extra weight, and thus need a little extra power. It's not just a question of durability. A stiffer frame will probably also have less camera jello (caused by vibration). You could also try the TP3 frame, or the 3" frame that Chris Rosser designed (www.aos-rc.com). If you ever do get your hands on a babytooth frame, I would go with the 3mm version for an HD build.

@salmans21 Год назад

@@MrShutterBug thanks for the reply! I went with the AOS T3 frame (Chris Rosser frame) and the FPV cycle 13mm 6350kv motors. I figured I can try them on 2s or 3s with a 85% motor output limit. Thanks again! This build was totally inspired by your DJI Baby Tooth build…I even ordered Tiny LED’s to connect between the motor and flight control board (betafpv 20A AIO).

@nistax2880 3 года назад

I fr prefer the fpv feed Insted of the go feed just because the go video is so low frame rate

@pimpedoutstereos9747 3 года назад

I had one of these and out of the box it flew amazing. Tuned really good, great power for 2s and awesome flight times. The crazybee x v2.2 fc on it can b unreliable. Mine had one of the escs shit itself with stuff all flying, they may have improved it since then tho

@MrShutterBug 3 года назад

I don't know of any changes in the FC since the Crux3 was first released. I think you probably just got unlucky. :-(

@Trumpethon 3 года назад

Marymoor park?

@MrShutterBug 3 года назад

It’s 60 Acres Park actually. You local?

@Trumpethon 3 года назад

@@MrShutterBug Oh cool I’ve been thinking about checking 60 acres park out, yea I’m right over in pierce county

@mdsajjat7776 3 года назад

Prices

@iamwud 3 года назад

Awesome video! This drone also works pretty damn well with the Shark Byte whoop board added in as well :) (I've got a video on my channel) - I'd recommend giving it ago :)

@MrShutterBug 3 года назад

I was thinking the same thing ;-)

@gaidkey1128 3 года назад

i wonder if anyone has made the insta360 go naked to drop the weight.also maybe try mounting the insta somewhere else.maybe the bottom or vertically in the front halfway between the top and bottom.just a thought.

@MrShutterBug 3 года назад

I have heard that some people have stripped it down and powered it directly from a bec on the drone, but I have not.

@fpvnme4845 3 года назад

the fpv feed is better looking then the 360 :}

@tarkusxfpv8010 3 года назад

The Insta360 is way too exposure not for beginner tho . Theres better camera mount for this that protect it much better and no jello .

@mikeb1596 3 года назад

Of course mine came with a bad ESC

@MrShutterBug 3 года назад

Bummer.

@smokinjoe1256 3 года назад

ausm

@Vrediskin 2 года назад

красавчег

@ruiz_fpv 3 года назад

💪😎👍🔝🔝🔥🔥🔥🌪🌪👌

@PhuocXeDap 3 года назад

Great, 9:13 a big crash

@FlyturboKwad 3 года назад

Oh my lots jello on the Insta360, FPV feed is lot better.

@TDPro1 3 года назад

I'm more like the dvr than that instago footage..

@terrysahaidak 3 года назад

I would really want to see you put separate VTX into it

@Cre8ionz. 3 года назад

I don't think this is working.. Or you loose the Betaflight OSD..

@terrysahaidak 3 года назад

@@Cre8ionz. in the crossfire version there is no video out pad as other versions of the fc has. But I guess there should be a way

@jamesp3254 3 года назад

You say you weren't paid for review but you were sent this product for free. Does banggood send you free products for you NOT to review and make a video on it? Sorry to harp on you but ' I was given this for free but will try not to let it effect my opinion' would sound more appropriate :)

@MrShutterBug 3 года назад

The point is they didn't get to dictate the content of the video, nor even see it before hand. Yes, they sent it to me, and yes they have been hoping that I would review it. I have been totally open about what happened, and as unbiased as I can be. If you think that somehow invalidates the content of my review, then you are entitled to that opinion. Happy flying!

@jamesp3254 3 года назад

@@MrShutterBug If i didn't like your content i wouldn't of said anything. Not aware of any channels that admit to taking money for positive reviews while reviewing... are you? :)

@MrShutterBug 3 года назад

@@jamesp3254 not in FPV, but there are certainly lots of RU-vidrs who get sponsored to talk about other products. And even within FPV there are quite a few "cheer leader" reviewers who make you feel like you're watching a sales pitch. I will never do that. FPV is my hobby and I make these videos for fun and to help the community. And, I'm totally open about what I get for free and what I pay for myself so there's nothing hidden. Recently I've actually been refusing most items that companies offer to send because my time is limited and I never want to feel like I owe anything to anybody. So, thanks for watching. I'm glad you enjoy the content. You can look forward to less reviews and more custom building projects in the future. ;-)